Problem in EEWB

Hi friends,
I want to add a field to Business Transaction through EEWB.
I have followed the following steps
1.created project under the worklist
    right click on project and said create extension
2.eewb Bui Obj as Business Transaction
    and extension as ADD_NEW_FIELDS
3.Then it opens a wizard
where i give all data and say complete
4.After that the Error Occured is
     *Definition CRM_BTX_ADD_NEW_FIELDS may not be created for another system type     *
thanking u
sree

It seems someone else has already created this type of extension. Now you need to use the same transport layer in your package (SE80) as was used earlier.
This may also result in some transport conflicts so be careful while creating eewb extensions.

Similar Messages

EEWB Enhancement Error while adding new field

Hello Experts ,
The requirement is to add the attachment feild in the support desk message screen (CRMD_ORDER) in the Fast track tab , although in the transaction tab already the document option is available for attachments the end user's want it in intial screen.
I have tried this using EASY ENHANCEMENT WORKBENCH - EEWB as per the suggestions given by experts in SDN,now i face a problem in EEWB .
I have created a object and extention in EEWB under a project,the it took me to the wizard automatically ,i followed up the notes in wizard to ADD_NEW_FIELDS and after it is completed, it shows a ERROR message as "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems." What does this Error Mean?Should i have to follow any system settings for this?
Note : I have made the system settings in EEWC -System Data Maintenence before enhancement.
Has any one worked with EEWB to ADD new fields,if so then please give me a solution to solve this problem.
Thanks & Regards,
Mohana Priya

Hi Priya,
We are also facing similar error in EEWB. If you have solved this problem, please update thread.
Thanks
Dhanraj

Cannot found the released extension in EEWB

Dear SAP Expert,
     I have problem with EEWB, I want to enhance extension for OPPORTUNITY HEADER. But I can not found the released extension. --> I think it have been DELETED.
I develop EEWB at client 039 (DEV) to add 4 fields in customer tab.
Client 039
     Project Name = ZEXTENSION_FIELD_FOR_OPP
     Project Description = create extension fields for opportunity
     Extension Name = ZEXTENSION_FIELD_FOR_OPP
     Extension Description = CREATE CUSTOMIZING FOR OPP
     Business Object = OPPORTUNITY
     Extension Type = CUSTOMER_H
After I develop , I transport to client QD and Production
Now. I want to add more new 2 fields , But I can not found old extension to modify..
What should I do?
How can I retrived the DELETED extension.
Best regards,
Siriporn T.

D,
Check this out:
EEWB Deleting a project and extension
Undo eewb enhancement (deleting the whole enhancement)
thanks,
ashish.

Enhancement of Business Partner (Relationships) using BDT -Bus Data Toolset

Dear Experts,
I have a requirement from my customer enhancing the Business Partner Relationships using BDT.
I should add 2 fields namely salary, employer start date in the Business partner Relationships, it must be added in the characteristics of relationships as one employee can have multiple employers and vice versa.
If I would like to add the fields in Business Relationships using BDT, are the steps same as adding fields in business partner? or do we need to perform any other steps? Did someone already did this type of modification, please provide your suggestions.
After adding the fields is it possible to cusomize the fields for history of the changes? e.g. if salary field has been newly added and after creating a BP after some days I want to change the salary and for the changed salary I want to have a history.
I would appreciate if you can help me with your suggestions.
Many thanks and best regards,
Afroz

Solved the problem Using EEWB.

Sales Order Extention

Hi,
I have a requirement like, i want extend Sales order in CRM. For this I choose EEWB. When i create them through EEW i have set the R/3 flag. Before that i have to maintain Logical system in EEWC t code. I did this also.
But now problem is, EEWB is asking for Package for R/3 logical system.
Where can i specify package name.
But it s true that we have to give package, because the extended fields would be created automatically in R/3. so we need package.
Please give me the solution. or any alternative solution.
Regards
Dinesh

Prasad,
If it is in Released To Warehouse status, you should see move_line_id against that delivery_detail_id in WDD table for that order line id. Can you check which organization that is created in and be in that organization to query up the screen. If it is autoallocate yes, you should also see records in the MMTP of that move order line. Can you check that table too?
Thanks
Nagamohan

ALE Interface Error

Experts
Im trying to generate an ALE interface for BUS0050. The process errors with "Segment ZIBP_0050_ITEM is used multiple times in IDOC types".
I have also tried this using a copy of the Object and get the same result
thanks for your help
Andy

hi, I think segment ZIBP_0050_ITEM is a customize segment which be added by EEWB, right?
Sometime, the problem in EEWB enhance field will impact our idoc generation.
in my opinion, you'd better delete all the customziing idoc type for BUS0050.
Then go to EEWB, delete the custimizing field related to ZIBP_0050_ITEM, and create them again.

EEWB BUPA Generation problems

Hi all,
I had some problems generating a table type extension for BUPA, I applied some notes to correct the error in the generation program but did not resolve my issues.
- 1st.
After generation the extension, I tried calling the ADD API , 'Z(extname)_BUPA_ADD' but I got an exception from FM BUFFER_SUBSCRIBE_FOR_REFRESH, because parameter NAME_OF_DELETEFUNC is equal to '%FUNC_MEM_INIT%' instead of having the generated FM 'Z(extname)_BUPA_MEM_INIT'.
I applied note 1456258 and ran wizzard again, but the problem was not resolved!!
I had to manualy change report SAPL(extname)BUPA_API to resolve the error. Is there any notes or solutions for this?
- 2nd
Applied note "0001484452 BUPA_EEW:Syntax Error In BUPA_API Task" ,
but generated FM get, 'Z(extname)_BUBA_GET'', has syntax error on statement "READ TABLEGT_ZBUT0000(extname) WITH KEY PARTNER = IV_PARTNER", there is a missing space after READ TABLE.
Corrections for this?
THX.
Edited by: daniele kirylo on Jul 6, 2010 6:29 PM

So you have generated everything with the EEWB and you get a dump because of the %FUNC_MEM_INIT% parameter wich has not ben rewritten with the correct function?
If this is the case and you have applied note 1456258 and done a regenarate again, then try to see wich function has the wrong coding:
Wich generated Z(extname)_API is causing the dump.
in se38 search for LZ(extname)BUPA_APIUXX , in there you should find all the includes with your generated APIs.
In every INCLUDE search for %FUNC_MEM_INIT% and substitute it with your Z(extname)_BUPA_MEM_INIT function (check if this one was generated, should be in there to).
These generated functions are Z and editable, but sap says:
THIS FILE IS GENERATED BY THE FUNCTION LIBRARY. *
NEVER CHANGE IT MANUALLY, PLEASE! *
So it's at your own risk.
hope this helps.

Problem related to EEWB

hi,
i'm facing a problem during doing enhancement of BP.i've created first a project and saved it in &tmp.Then i've tried to create new extension under that project and i've added that new enhanced field to the extension through wizard.but when i 've clicked on complete button of wizard i.e. when i'm trying to generate that extension system is giving error "Table CI_EEW_BUT000 can't be created with package $TMP".can anyone plz tell me how i can solve this problem??

Hi Anirban,
For this you might have to create a custom Zxxx Package in your system using transaction se80 and then use this package in the EEWB transaction.
Since the objects in $tmp packages cannot be transported, changes to certain object are prohibited.
Hope this solves your problem!
Jash.

Eewb problem in crm2007 IDES

Hi:
    in the CRM2007 IDES, I used the tcode "eewb" to create a project with a z package, and created a extension, the business object is "BUPA" and the extension type is "ADD_NEW_FIELDS" , but the wizard can not start and the error message is "Extension type ... cannot be combined with package ...".
   I modified the transport layer of the project z package to "ZDRZ" , and the wizard can start. But when generated the extension, got an error message : in the table "BUT000" have no the field "zz.....", the field is add_new_field. Why?
THANKS.

Hi:
    the error message is :
Syntax error in Function Group SAPLZZG00BUPA: The data object "BUT000" does not have a component called "ZZEX_TEST01".
"ZZEX_TEST01" is that I want to create the field .
   I can not read the note 813387.
THANKS.

Problem with SRM Business Partner enhancement using EEWB.

Hello Gurus,
I am doing Business Partner Enhancement using EEWB. basically adding new tab with few data fields. After using EEWB, the new tab hasbeen generated automatically and BP is creating successfully and data is stored in tables.
But in the custom tab, the fields are displaying in table format after using EEWB. User dont want in the table control, and they want normal screen fields.
How can we do that. After that, will it reflect to portal automatically or do we need to do any thing?
Pls suggest me.
Regards,
Ram

Hi all,
I used EEWB to enhance BUT000 wiht a new field and a new tab.
How can I show them in SRM7?
BBPMAININT has been replaced with an "equivalent" WebDynpro application and old Badis are not supported anymore.
any ideas?
thanks in advance.
Albe

EEWB problem

Hi,
I have added a field through EEWB to header level and i want to populate this field with HEADER GUID.
A Badi implementation ZEEW_CUSTOMER_H01 was generated through EEWB. In this BADI, in CRM_CUSTOMER_H_SET_SCREEN method, it has some auto generated code, below which am calling CRM_INTLAY_PUT_DATA to transfer the HEADER GUID to the newly added field.
The code is,
l_zcrmt_0100_btx_ui01-guid = lv_header_guid.
l_zcrmt_0100_btx_ui01-ZZCUSTOMER_H0101 = link.
CALL FUNCTION 'CRM_INTLAY_PUT_DATA'
EXPORTING
 IV_INTERFACENAME = 'ZCRMT_0100_BTX_UI01'
 IV_KIND = 'A'
 IS_INTERFACEVALUE = l_zcrmt_0100_btx_ui01
IT_INTERFACEVALUE =
EXCEPTIONS
 ERROR_OCCURRED = 1
 OTHERS = 2
'ZCRMT_0100_BTX_UI01' is the interface i find in table CRMC_MAPPING, so am using this interface to set the values to the screen.
Please advice.
Thanks & Regards,
Karthik.

Hi Karthik,
You are absolutely right in putting the data.
MODULE data_0100_put INPUT.
PERFORM data_put
 USING
 'ZCRMT_0100_BTX_UI02'
 'A'
 zcrmt_0100_btx_ui02.
ENDMODULE. " data_0100_put INPUT
FORM data_put
USING
 value(iv_name)
 value(iv_kind)
 value(is_value).
CALL FUNCTION 'CRM_INTLAY_PUT_DATA'
 EXPORTING
 iv_interfacename = iv_name
 iv_kind = iv_kind
 is_interfacevalue = is_value
 EXCEPTIONS
 error_occurred = 1
 OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE i004 WITH sy-dynnr.
ENDIF.
ENDFORM. " data_put
While getting the data you can use the following function modules to get the HEADER and ITEM Guid.
CRM_INTLAY_GET_HEADER_GUID
CRM_INTLAY_GET_ITEM_GUID
CRM_INTLAY_GET_DATA
Reward points if it helps.

EEWB Custom fields creation problem

Hi All,
I have scenario in which I have to add 3 custom fields in Service Desk (Solution Manager) , I could able to do this if my project is saved in local($TMP) but if I am doing it using a project which is saved in package it is giving me error message no TK885 (No Request as sent through the interface ).
EEW Bus.Object : SERVICE_TRANSACTION
Extension Type : CUSTOMER_H
Please help.
Regards,
Manohar

Hello,
For EEWB the system setup is important in order to create EEWB transports.
First of all via SM30 check the view V_OXT_SYSTAB, assign the proper logical system name and system role should be Development system.
Furthermore read/implement the following SAP Note (especially the included PDF file).
Note 1086848 - EEW enhancements cannot be transported
Success.
Wim

Problem while deleting the Project & Extension created using EEWB

Hi
I have created a Project and Extension to add a new field in Opportunity using EEWB however it got some errors and hence
wanted to delete this Extension and Project as well but while deleting the Extension system is throwing an error 'Extension XXX couldn't be deleted'.
Because of this we have been facing some issue in BW Extractions.
Could you please help me out how can we delete this ?
Best Regards
Anil

Hi Prasenjit
I have deleted all the fields and corresponding structures as per your suggestion however still I'm not able to delete the
Extension and Project.
Best Regards
Anil

EEWB Fields in PCUI Screen

Hi All
I am facing a weird problem for a long time and have not got any documentation to refer.
I have created a new field through EEWB and want to see it in both Form & List View of Accounts transaction(CRMM_ACCOUNT) in PCUI.
I realised that extended field through EEWB are created in a Field Group(FG) "CI_EEW_BUT000". However the "Search Result Area" Field Group (ACC_SRES_01) contains a 32 Digit Number Field Group in it. Example (4A934616C4104543B9A972B516D6C4E9) . This Field Group in turn contains Field Group "CI_EEW_BUT000".
However what I have realised is that this dynamic field group number keeps on getting changed.
But today I can not locate this dynamic field group in the main field group table (Transaction: CRM_BSP_VCLS_FLDGRP) but to my surprise I still find it included in the Field Group "ACC_SRES_01".
Now the implication is that, I can not see my extended field properly in List View of accounts transaction(crmm_account). I have tried umpteen times to include this field in List view through CRM designer but it is not working. However field is visible in FORM View.
Does anybody have any idea that how can extended field groups be controlled and how can I display my extended field in List View ?
Thanks in advance

Hi Vishal,
The naming convention sometimes is wrong although it has been created by a standard SAP function or program. Don't worry about this. Many standard PCUI applications are wrong in name conventions terms. Don't care.
However, naming convention is not the problem with your layout generation (100%), but I'm not sure what's the problem.
The option you have is to create a new field group, based on the same screen structure than CI_EEW_BUT000 with the same fields. Try to follow the name convention but this is not very important. Regenerate your new field group (with the correspondant view) and try it.
If not, perhaps the perhaps the Weblog PC-UI and Easy Enhancement Workbench (EEW) Integration helps you.
Here's the link : <a href="/people/tiest.vangool/blog/2005/07/24/pc-ui-and-easy-enhancement-workbench-eew-integration">/people/tiest.vangool/blog/2005/07/24/pc-ui-and-easy-enhancement-workbench-eew-integration</a>
Regards
Message was edited by: Javier Merino Vivar

How to delete the structure created from Tx: EEWB ?

Hi SAP Gurus
I have an issue at hand. I have added three components in the structure BUS000___I and the components are ZZ1, ZZ2, ZZ3, I was following the EEWB wizard and from there these three components were made, now I cannot delete these components directly from SE11. Because after adding these components the system is not allowing me to do so and is asking for the access code.
I am getting a syntax error in all the tx where Business Partner is used. No old versions for this structure was found in the system. The only structure that has come into this BP structure is ZBSTC0000000000 followed by three data elements of this structure.
I know the Project and the enhancement that was created and I have tried deleting the enhancement from EEWB but when i try deleting it, it always fall into an intermediate stage where it leaves some entries and due to these left over entries these errors are coming.
Another imp thing is that the structure that i have reported is a newly created one I cannot find this anywhere else. looks like this structure was created after executing the EEWB transaction only.
Now when I try activating the enhancement again the magic wand button used to activate an enhancement and the generate button is also inactive in EEWB and now it is not getting activated, even after rt click enhancement then clicking change or by clicking on the edit-change button on the top tool bar. Do you think if I create another enhancement this button might get activated?
Please let me know how do I delete these components.
Kindly reply at the earliest.
Regards,
Amit

Hi, I had the similar problem (and here the solution):
Spezifikation: Deletion of EEWB fields manually, error in middleware bdoc,
Kurztext
Deletion of EEWB fields manually, error in middleware bdoc,
Langtext
BDOC-Error from function module BAPI_CRM_SAVE. no further using of the
middleware for sales activities (sales order) possible.
see steps for reconstruction
Schritte zur Rekonstruktion
what done before:
- added one field via transaction code EEWB to business object
SALES_TRANSACTION (Verkaufsvorgang), "Erweiterungstyp CUSTOMER_I
(Positions-Zusatzextension erweitern) with one existing data element
type Z_, Geschäftsvorgangstypen = Verkauf
no selection of "Datenaustausch mit den Mobile Clients",
"Datenaustausch mit R/3 Supply Chain Execution" or
"Business Information Warehouse".
- deleted the extension manually, deleted the eewb project manually
(successful)
- got an short dump on saving a sales order via transaction code
CRMD_ORDER:
dump type: LOAD_TYPE_VERSION_MISMATCH
Der Abbruch trat im ABAP-Programm "SAPLCRM_UPLOAD" auf, und zwar in
"CRM_UPLOAD_BUS_TRANS_MSG". Das Hauptprogramm war "CRM_1O_FRAME ".
Im Quelltext befindet sich die Abbruchstelle in Zeile 5
des (Include-)Programms "LCRM_UPLOAD$18".
(bei Anwahl des Editors: 50) der ABAP-Source "LCRM_UPLOAD$18".
000040 *********************************************************
FUNCTION $$UNIT$$ CRM_UPLOAD_BUS_TRANS_MSG
000060
000070 IMPORTING
000080 REFERENCE(IV_GUID) TYPE !CRMT_OBJECT_GUID
000090 EXPORTING
000100 REFERENCE(ES_BDOC_HEADER) TYPE !SMW3_FHD
000110 REFERENCE(ES_BDOC_MESSAGE) TYPE !/1CRMG0/BUS_TRANS_MSG
000120 REFERENCE(ES_BUS_TRANS_MSG) TYPE !BAD_BUS_TRANSN_MESSAGE
000130 EXCEPTIONS
000140 !ERROR_OCCURED .
- re-generation of a lot of of function modules
(e.g. CRM_UPLOAD_BUS_TRANS_MSG)
and some corresponding structures (e.g. CRMT_CUSTOMER_I_COM)
- fixed the short dumps with this gereration
Current Errors:
- the crm middleware (mBdoc) cannot copy sales orders from crm to r/3
- via transaction code CRMD_ORDER i copy an existing sales order and
save or try to change just one field and save.
- saving is succesfull (message type s), but on changing again, the
order is locked by middleware
- bdoc in transaction SMW02 is on state yellow "An Empfänger gesendet
(nicht alle haben bestätigt) BUS_TRANS_MSG"
- in transaction code SMW02 occurs:
Mdt Benutzer Funktionsbaustein Queue-Name
100 CPIC_FILO BAPI_CRM_SAVE R3AD_SAL_ERR
Datum Zeit
12.04.2007 17:52:10
Statustext
Inkonsistenz zwischen den DDIC-Typen CRMT_CUSTOMER_I_COMT und ABAP-
genera
SOLUTION:
re-generation of *ALL* code which using structure CRMT_CUSTOMER_I_COMT had solved it.

Problem in EEWB

Similar Messages

Maybe you are looking for