Problem in eos 1100d line in screen..

I have this problem after a month from buy it ..blz tell me what is this problem? ..and can I fx it?....
sorry for my bad english..

no reply
Spoiler (Highlight to read)

Similar Messages

Change transaction using BDC-problem for large number of lines on screen

Hi All,
I am developing BAPI (using BDC) which creates quality notification in SAP which is entered via front end web application. Structure p_qmsm contain 3 lines of task in notification. The code is as given below. To avoid problem of large no of lines on screen,code lines starting with * is used. This actually for pagedown after entering every 2 lines and creates new line. so that 2 lines always push up on screen and there will not be problem for creating large no of lines on screen
perform bdc_dynpro using 'SAPLIQS0' '7200'.
perform bdc_field using 'BDC_OKCODE' '=10\TAB11'.
LOOP AT p_qmsm INTO wa_qmsm.
*IF wa_qmsm_cntr > 2.
       wa_qmsm_cntr = 2.
       perform bdc_dynpro using 'SAPLIQS0'                   '7204'.
       perform bdc_field   using 'BDC_OKCODE'                 '=PEND'.
ENDIF.
perform bdc_dynpro using 'SAPLIQS0' '7204'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'VIQMSM-QSMNUM(' wa_qmsm_cntr ')' INTO wm_qmsm_qsmnum.
CONCATENATE 'VIQMSM-MNGRP(' wa_qmsm_cntr ')' INTO wm_qmsm_mngrp.
CONCATENATE 'VIQMSM-MNCOD(' wa_qmsm_cntr ')' INTO wm_qmsm_mncod.
CONCATENATE 'VIQMSM-MATXT(' wa_qmsm_cntr ')' INTO wm_qmsm_matxt.
perform bdc_field using wm_qmsm_qsmnum wa_qmsm-qsmnum.
perform bdc_field using wm_qmsm_mngrp wa_qmsm-mngrp.
perform bdc_field using wm_qmsm_mncod wa_qmsm-mncod.
perform bdc_field using wm_qmsm_matxt wa_qmsm-matxt.
wa_qmsm_cntr = wa_qmsm_cntr + 01.
ENDLOOP.
CALL TRANSACTION 'IQS2' USING wt_bdc
MODE 'N' UPDATE 'A' MESSAGES INTO P_MESSTAB.
The same code is used in modify mode also. web application is sending all 3 lines in modify mode even if single line is modified. It is already decided to send all rows back from web application to SAP in same sequence. It is working fine if i comment 5 lines which is starting with *. But in modify mode, how can i ensure that correct row is modified? and how can i achieve problem of large no of lines on screen?Please suggest?

Hi yogesh,
how can i ensure that correct row is modified?
1. For this we need to know two things ;
   a) the database table in which the entries are already stored
   b) the sequence in which they are displayed in the transaction.
2. So before changing any line, we need to compare (the primary key values / important values)
   a) as per the database table and as per the incoming data from web application (using bapi)
b) if the match is ok, it means that particular row was not modified, else modified.
how can i achieve problem of large no of lines on screen?
1. For this I am not sure about the transaction and its screen. Manytimes for appending row on the screen,
there is a PLUS + button on the grid toolbar. So for every entry, (inspite of some empty/filled rows already visible on the screen), we should use the + button, and this new row always appears on the top i.e. row number 1.
hope this helps.
regards,
amit m.

Hello I suffer from a problem with your MacBook There is a black line in screen

Hello
I suffer from a problem with your MacBook
There is a black line in screen
http://i48.tinypic.com/35apzz8.png

Is the line always present? If you boot up the MacBook holding down the option key during startup so that you get to the startup manager, is the line still there?
If so you have a hardware issue and it needs to be repaired. Contact Apple using their Express Lane if you live in a country where that is available, or call the appropriate phone number on this page if not. You can also take the MacBook in to an Apple store or service provider.
Best of luck.

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the MacBook, and now I am always seeing it. How to remove it?

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
Regards,
Ujjal

Backup your files to a external hard drive and disconnect.
Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
You can run these things and it might clear your issue or give further informaiton
Perform a hardware check
http://support.apple.com/kb/ht1509
Then see if resetting the SMC/PRAM resolve your issue
http://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379

Lines on screen, can't reset w home and sleep button at same time

Lines on screen, can't reset w home and sleep button at same time. Any advise. 4th gen. 32g touch

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod 4th gen has lots of lines over screen looks like bar codes and can't see display?

My step sons iPod I just a year old but for about 3 months it's been coming up with lots of lines on screen looks like bar code. Now he can't see anything on screen due to his. He has not been on it for a while as he has a 2nd one from his mum but I forgot to check this out before warranty ran out.
I have tried system re boot, I thought it was due to him charging it with USB on xbox360.
Can someone please help

- Try restoring the iPod from backup.
- If not successful then restore to factory defaults/new iPod
- If still problem time for an appointment at the Genius Bar of an Apple store.

Thin vertical colored line down screen of 21 inch mac version 10.6.8

I have a thin line down screen, green at top and bottom and purple through middle.

Hello,
common enough problem.
Take a screen shot & view that in Preview, move the Preview window around, if you see 2 green lines it a Video card/VRAM problem, if the line does not move moving the pic around then it's the LCD or the internal cable.

Problem with Table control lines

Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT   gt_scr400
       INTO wa_scr400
       WITH CONTROL tc_scr400
       CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridhar

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Thin Horizontal Line Across Screen

I've had them before and they disappeared spontaneosly. The latest one seems to want to hang around. Any idea how to get rid of it?

This is a followup to my post earlier today. A web search on "Thin Horizontal Line Across Screen" turned up this article:
http://www.daniweb.com/techtalkforums/post24947-5.html
Sure enough, my horizontal line came back. I decided to follow the advice in the linked article. I didn't even have to twist the monitor. I barely tapped the screen as I was reaching up to twist the panel, and the line disappeared. This suggests to me that the problem is a loose internal connection between the driver circuitry and the panel.

I can't download pictures from my camera ( Canon EOS 1100D).

Hi
I can't download pictures from my camera ( CANON EOS 1100D) on my Macbook Pro.
I can download pictures on other computers so it's not a cable problem. I can connect memory sticks to the Mac, so it is not a USB port problem.
I did install the software provided by Canon (after I tried to download pictures and noticed it does not work). Why doesn't my macbook pro recognise my camera ? Thanks. Leacoulet

The prompt won't appear if the photos were originally synced from a computer, if they were taken with the iPhone then there are instructions on this page for how to disable/enable the prompt (the page is specifally about disabling the prompt, but it's the same process to enable it).

Imac shows super weird lines on screen during start up and then freezes at blue screen (WITH PHOTO)

My Imac froze earlier today as I was dragging an image from safari into indesig and when it froze the weirdest pattern overlaid the screen. It looked just like the opacity pattern from photoshop with grey and white squares. I turned the computer off using the power button and unplugged everything.
Now when I try to start it these weird lines appear on my start up screen (see link)...
http://meijerladdaruppgrejer.wordpress.com/2012/07/24/oops/
as you can see the apple and the wheel appears as normal...
... then it moves to a normal looking white screen (perhaps a bit greener than usual) and around 30 seconds later freezes at the blue screen.
I've tried the cmd + alt + p + r several times but it won't help.
If i press alt during start up I can see and choose my hard drive but just end up at the blue screen again.
Can I try starting it up in safe mode or something?
Thanks! Any input is welcome.

Is this the same problem? Verical Lines" seems a bit diffuse. I've seached for a similar question and found a lot of other types of lines and stripes.
Could this be a solution?
http://support.apple.com/kb/TS3824?viewlocale=en_US&locale=en_US
If so, how do I install the update if I can't get passed the blue screen? Can I start my Imac in safe mode? How?
iMac (Mid 2011): Unresponsive white screen on startup or vertical lines on screen
Symptoms
In certain circumstances, your iMac (Mid 2011) may become unresponsive on startup, with a white or gray background on the display. You may also notice vertical lines on the display while using your iMac.
Resolution
Install the iMac Graphics Firmware Update 2.0 if your computer exhibits these issues. To install the update, chooseSoftware Update from the Apple () menu and follow the onscreen instructions.
Important: Do not interrupt the power to the computer while the update is installing. After the update is finished installing, you will need to restart your iMac.

A505-S6005 lines across screen?

Hey all, got a problem I was hoping you could help me diagnose. My toshiba laptop one day developed a single gray line across the bottom of the screen. So I did some searching and people said that the contacts for the LCD monitor can sometimes wear out or whatever and create a line, but usually it's best just to leave it alone because chances are it won't get worse. And then another line appeared...and then another. Now, almost a month later, the whole bottom inch of my screen is populated by about a hundred white lines, some flickering occasionally. I looked into buying a new LCD screen, I know the type and the part number and I'm confident I can do the repair myself. However, I want to be absolutely sure that it is the screen itself that is bad, and nothing else. Here are the things I've tried to attempt to diagnose it: 1. Tried moving the monitor back and forth (for possible loose monitor cable) and that has no effect on the inhabitants of line city. 2. Took a screenshot and pasted it into paint to see if the lines appeared (to determine hardware vs software) and the lines [b]do not[/b] appear in the screenshot. 3. Hooked up my laptop to an external monitor - once again, the lines do not appear on an external monitor. 4. Tried (perhaps stupidly) to gently twist the screen back and forth (I guess it has something to do with the screen contacts?) and it made no difference. So...nothing seems to make it worse or better, and I suppose since they don't show up on an external monitor we can rule out a software problem. So could it possibly be something else or is it most definitely the screen going bad? -Thanks for reading

Hi! Seems to me that you have done well trouble shooting your problem. If the lines don't show up on a external monitor, what else could it be?? Can you attach screen shots?
Dokie!!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Computer won't recognise EOS 1100D

I have and EOS 1100D and recently it has stopped connecting to computers. I've tried laptops and my stationary computer which the camera has worked with before. It doens't seem to be a problem with the cable because I've tried several of them and the computer just says "USB device not recognized. The last USB device you connected to this computer malfuntioned and Windows does nit recognise it. Reccomendation; Try recconecting the device. If Windows still does not regognize it, your device may not be working properly". I have windwos 8.1. I've tried restarting, reconnecting, removing and putting the memory card back in, charging it, putting it into other usb hubs and I am really starting to panic beacuse I do not want to spend more money on this.

Have you installed the Canon software on the computer? I think you'll at least need EOS Utiilities installed, to be able to connect via the USB cord. Even if you have it installed, it might be worth updating to see if that resolves the problem. Alternatively, have you checked for updates to your computer operating system (Windows 8.1)? Or have you recently done an update that might have undone something, since it sounds as if you were able to connect the camera previously? You may need to do an update, do another update or patch, or even undo a recent change to correct the problem. It's possible the USB cable itself has failed. Worst case, the mini USB socket in the camera is damaged and not communicating properly. This would be expensive to repair, since the socket is usually part of the main board of the camera and that would likely have to be completely replaced. ***********
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & EXPOSUREMANAGER

Asset Off Line Splash Screen burnt to DVD

I had the Red 'asset off line' splash screen burnt to a DVD earlier today, what I had done was accidentally deleted a slideshow folder from my hard disk believing it was unused.
In Encore the slideshow was already built, I assume, and you could preview it and play it in the monitor window. Check project ran without errors as did the Build DVD, but when I went to play the DVD the slideshow soundtrack played ok but the slides were replace by a red 'asset offline' slash screen similar to the one in PP that zoomed in and out on the screen.
My mistake in the first place, I hold my hands up to that one. But shouldn't Encore have warned me about the mistake I was making in some way ?
Kevin

Joe,
No I opened Encore and this project after the slides were deleted,
I had no warnings when I opened the project, or at anytime during the build process.
After I noticed the problem on the DVD, I restored the deleted folder and all was ok from then on.
Kevin

2 vertical lines on screen

My iPhone 4s after restore show me 2 vertical lines on screen, how to fix this problem? I buy my phone on Austria 3 network

Can I take it to any Apple Store on Austria or at take to network provider?
P.S. Sorry for my bad English.

Problem in eos 1100d line in screen..

Similar Messages

Maybe you are looking for