Problem in ESS (Personnal Information)
Hi,
We are implementing Employee Self Services in ECC6, we are facing a problem that, in the Area page for Personnal Information is having only EIC Authendication.
We are not able to view Address and Bank Details here in that area page.
Kindly show some light
Sera
In spro go to the home page framework and there in the resources identify the resource that you want to use. i.e. address application for country usa
Check the linkage of that resource with service and then in turn servier with sub area and sub area with area and aread group.
Once you are done with this then the links will automatically start appearing.
Similar Messages
-
ESS Personnal Information workset Problem.
Hi all,
We are working on mySAP ERP 2004 60.2 version of ESS.We have successfully installed the business package. But there is strange problem.
In the personnal information workset we have only part of data visible whereas the rest of them are not.
Do any of them know how to resolve it.our BP is deployed on the same J2EE engine of portal (SP 12). The backend is ECC 5 and WAS is 640.
Is backend has to be configured to fetch the rest of the data or portal side has some problem?
Any help will be appreciated.
Regards,
VivekHi Vivek,
Could you please elaborate on the problem:
"In the personnal information workset we have only part of data visible whereas the rest of them are not."
Regards,
ramesh -
RFC Call Error - from Portal End - For ESS Personal Information service
Hi,
I am getting "Syntax error in program SAPLHRXSS_PER_MAC ., error key: RFC_ERROR_SYSTEM_FAILURE " error Message on the portal (ESS--->Personal Information Screen).
When I did RFC trace analysis (using ST 22) this is what i get.
Can you let me know what could be the issue.
We are running HR Backend(Support Pack 15,ecc 5.0).
Portal (EP 6.0 SP19, ESS 100 (SP 10)).
Could you please let me know what could be the issue ?
Syntax error in program "SAPLHRXSS_PER_MAC ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPMSSY1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred
in the Include "IF_HRPA_PERNR_INFTY_XSS=======IU " in line 114:
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
Author and last person to change the Include are:
Author "SAP "
Last changed by "C5069405 "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLHRXSS_PER_MAC ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred:
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "srv006"
Network address.......... "167.116.230.56"
Operating system......... "HP-UX"
Release.................. "B.11.11"
Hardware type............ "9000/800"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "srv006"
Database type............ "ORACLE"
Database name............ "H81"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "May 21 2006 20:29:01"
Created in............... "HP-UX B.11.00 A 9000/800"
Database version......... "OCI_920 "
Patch level.............. "129"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
Memory usage.............
Roll..................... 16128
EM....................... 4189928
Heap..................... 0
Page..................... 0
MM Used.................. 629192
MM Free.................. 3558216
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "SAPMSSY1" in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
The termination occurred in line 68 of the source code of the (Include)
program "SAPMSSY1"
of the source code of program "SAPMSSY1" (when calling the editor 680).
Source Code Extract
Line SourceCde
38
39 module %_rfcdia_call output.
40 "Do not display screen !
41 call 'DY_INVISIBLE_SCREEN'.
42 perform remote_function_diacall.
43 endmodule.
44
45 module %_cpic_start.
46 if sy-xprog(4) = '%RFC'.
47 perform remote_function_call using rfctype_external_cpic.
48 else.
49 call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
50 perform cpic_call using convid.
51 endif.
52 endmodule.
53
54
55 form cpic_call using convid type c.
56 communication send id convid buffer header.
57 if sy-subrc eq 0.
58 perform (sy-xform) in program (sy-xprog).
59 else.
60 message a800.
61 endif.
62 endform.
63
64 form remote_function_call using value(type).
65 do.
66 * test if sy-xprog and sy-xform are set
67 * sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
>>>>> call 'RfcImport' id 'Type' field type.
69 perform (sy-xform) in program (sy-xprog).
70 rsyn >scont sysc 00011111 0.
71 enddo.
72 endform.
73
74 form remote_function_diastart.
75 do.
76 call 'RfcImport' id 'Type' field rfctype_rfcdia.
77 perform (sy-xform) in program (sy-xprog).
78 "Parking position for next request
79 rsyn >scont sysc 00011111 10.
80 "ALternativ : Free mode
81 "COMMIT WORK.
82 "SYSTEM-CALL FREE MODE 0.
83 enddo.
84 endform.
85
86 form remote_function_diacall.
87 sy-xcode = '%_@no@'.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
2 FORM SAPMSSY1 SAPMSSY1 68
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 2 Ty. FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
2222
0000
SY-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
SYST-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TYPE
3
0000
0003
SY-XPROG
SAPLSYST
5454555522222222222222222222222222222222
310C393400000000000000000000000000000000
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
%_SPACE
2
0
No. 1 Ty. MODULE (PBO)
Name %_RFC_START
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
0003
Internal notes
The termination occurred in the function "ab_genprog" of the SAP
Basis System, specifically in line 1374 of the module
"//bas/640_REL/src/krn/runt/abgen.c#10".
The internal operation just processed is "CALY".
The internal session was started at 20070502223335.
Program name.........: "SAPLHRXSS_PER_MAC ".
Error message........: "The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown.".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
( 0) 0x40000000016d6a8c CTrcStack2 + 0x2bc [dw.sapH81_DVEBMGS33]
( 1) 0x40000000016d67c0 CTrcStack + 0x18 [dw.sapH81_DVEBMGS33]
( 2) 0x4000000001d41438 rabax_CStackSave__Fv + 0x100 [dw.sapH81_DVEBMGS33]
( 3) 0x4000000001d4dbf8 ab_rabax + 0x1f68 [dw.sapH81_DVEBMGS33]
( 4) 0x40000000018cc09c ab_genprog__FPcPvUii + 0xdbc [dw.sapH81_DVEBMGS33]
( 5) 0x4000000000d3b4cc newload__FPcP13TmpSubpoolDirUi + 0x29c [dw.sapH81_DVEBMGS33]
( 6) 0x40000000016a7324 ab_LoadProg__FPcUi + 0xec [dw.sapH81_DVEBMGS33]
( 7) 0x40000000016831fc ab_link + 0x334 [dw.sapH81_DVEBMGS33]
( 8) 0x40000000015694d4 ab_rfcimport + 0xccc [dw.sapH81_DVEBMGS33]
( 9) 0x40000000018cff98 ab_jcaly__Fv + 0x598 [dw.sapH81_DVEBMGS33]
(10) 0x4000000000f98df8 ab_extri__Fv + 0x17a0 [dw.sapH81_DVEBMGS33]
(11) 0x40000000016ab2d8 ab_xevent__FPCc + 0x38 [dw.sapH81_DVEBMGS33]
(12) 0x400000000189c9a8 ab_dstep + 0x120 [dw.sapH81_DVEBMGS33]
(13) 0x4000000000ed4c00 dynpmcal + 0xd0 [dw.sapH81_DVEBMGS33]
(14) 0x4000000000ed1554 dynppbo0 + 0x1e4 [dw.sapH81_DVEBMGS33]
(15) 0x4000000000ed0af4 dynprctl + 0x43c [dw.sapH81_DVEBMGS33]
(16) 0x4000000000ecb7a0 dynpen00 + 0x2118 [dw.sapH81_DVEBMGS33]
(17) 0x4000000000fa598c Thdynpen00 + 0x6a4 [dw.sapH81_DVEBMGS33]
(18) 0x4000000000fa49b8 TskhLoop + 0x50d8 [dw.sapH81_DVEBMGS33]
(19) 0x4000000000f999f8 tskhstart + 0x1e0 [dw.sapH81_DVEBMGS33]
(20) 0x4000000000d42194 DpMain + 0x484 [dw.sapH81_DVEBMGS33]
(21) 0x400000000220d41c nlsui_main + 0x14 [dw.sapH81_DVEBMGS33]
(22) 0x4000000000992794 main + 0x14 [dw.sapH81_DVEBMGS33]
(23) 0xc000000000020ab0 $START$ + 0xa0 [/usr/lib/pa20_64/dld.sl]
List of ABAP programs affected
Index Ty. Program Group Date Time Size Lang.
0 Prg SAPMSSY1 0 06.11.2003 20:53:07 18432 E
1 Prg SAPLSYST 1 10.05.2006 09:57:38 30720 E
2 Typ SYST 0 04.12.2000 14:54:51 27648
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMSSY1
SYST . . : : 00002404
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 SourceCde
118 CLEA 00 0035 SAPMSSY1
119 CLEA 00 0036 SAPMSSY1
120 CLEA 00 0037 SAPMSSY1
121 MESS 00 001C SAPMSSY1
122 ENDF 00 0000 SAPMSSY1
123 -
00 0000 SAPMSSY1
124 PERP 00 0001 SAPMSSY1
125 PERP 02 0000 SAPMSSY1
126 WHIL 00 0002 0000 0000 0000 0000 0000 0000 SAPMSSY1
130 WHIL 00 0003 0000 0000 0000 0000 0000 0000 SAPMSSY1
134 BRAN 05 000E SAPMSSY1
135 CALY 00 0003 0038 002A 0005 002B 0000 0000 SAPMSSY1
>>>>> CALY 02 0000 0039 8000 0000 0000 0000 0000 SAPMSSY1
143 xper 02 0000 0010 0011 SAPMSSY1
145 PERP 80 0000 SAPMSSY1
146 SYSC 1F 0000 SAPMSSY1
147 BRAX 00 FFEF SAPMSSY1
148 WHIL 00 0004 0000 0000 0000 0000 0000 0000 SAPMSSY1
152 ENDF 00 0000 SAPMSSY1
153 -
00 0000 SAPMSSY1Hi,
The error is occuring in the program file SAPLHRXSS_PER_MAC.
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred
in the Include "IF_HRPA_PERNR_INFTY_XSS=======IU " in line 114:
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
Information on where terminated
The termination occurred in the ABAP program "SAPMSSY1" in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
This place where it has terminated is highlighted in bold letters.
form remote_function_call using value(type).
do.
test if sy-xprog and sy-xform are set
sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
<b> call 'RfcImport' id 'Type' field type. </b>
perform (sy-xform) in program (sy-xprog).
rsyn >scont sysc 00011111 0.
enddo.
endform.
Thanks,
Manoj -
Problems with ESS in "Career and Jobs" in option "Appraisal Document"
hi
My problem with ESS in "Career and Jobs" menu in the option "Appraisal Document" is not appear the appraisal documents or my my question is...
What I can customize for appear the "Appraisal Documents"?
My ESS shows the following screens:
http://img295.imageshack.us/img295/3451/appraisalportal.jpg (there is also a problem with the flash player, I marked with red rectangle)
I found looking on the internet that had to configure the Performance Management
I entered in SPRO tcode, follow these steps
http://img580.imageshack.us/img580/2598/appraisal1.jpg (Entered in "Define Templates in Performance Management")
http://img215.imageshack.us/img215/6233/appraisal2.jpg
http://img651.imageshack.us/img651/4243/appraisal3.jpg
http://img340.imageshack.us/img340/622/appraisal4.jpg
http://img52.imageshack.us/img52/1842/appraisal5.jpg (click in "End Configuration")
http://img534.imageshack.us/img534/8746/appraisal6a.jpg (Error screen part 1)
http://img4.imageshack.us/img4/1261/appraisal6b.jpg (Error screen part 2)
I hope the answers and posts, I wonder if my chosen way(configuring the Performance Managemente) is correct
thanks for posts
Ivanthanks Chris for comments,
Now I customize the "Appraisal Document"
http://img18.imageshack.us/img18/4640/uiapraisal.jpg (Here I can see the evaluation that was done in the back-end)
but, I clicked in the hiperlink of "Appraisal Document Name", I see this error:
http://img80.imageshack.us/img80/8157/uiapraisal2.jpg (Error:<b>Page not found or not avaible</b>)
even before I saw another error (<b>"There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator."</b>) in others posts(questions in sap forums) mentioned, These included the following notes
1468466 Performance Management Launchpad Configuration
1463821 Performance Management Portal Configuration
1416756 OBN Configuration in Performance Management
1408243 Configuration for object-based navigation
They recommended me in the back-end include roles in the resources:
http://img401.imageshack.us/img401/8048/uiapraisala.jpg
http://img689.imageshack.us/img689/9359/uiapraisalb.jpg
The note number 1463821(especially), I recommend the following
<a href="https://websmp230.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1463821" target=nieves>note 1463821</a> (link note)
http://img88.imageshack.us/img88/7484/uiapraisal1.jpg (LPD_CUST tcode)
http://img266.imageshack.us/img266/7405/uiapraisal1b.jpg (Check in "Restricted Parameters" and "Active" - "EXT_HEAD")
but in these notes appointing a role that I could not find on my system that is:
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_wd_ui
because, I was looking at my porta's role (With reference "Appraisals Document")
http://img97.imageshack.us/img97/5167/uiapraisal3a.jpg
http://img413.imageshack.us/img413/5643/uiapraisal3b.jpg
http://img534.imageshack.us/img534/4585/uiapraisal3c.jpg
http://img203.imageshack.us/img203/4605/uiapraisal3d.jpg
Finally, my main error is :<b>Page not found or not avaible</b> (I referred at the beginning of the post http://img80.imageshack.us/img80/8157/uiapraisal2.jpg)
Why I see this error (Page not found or not avaible)?
http://img80.imageshack.us/img80/8157/uiapraisal2.jpg (Error:Page not found or not avaible)
I hope the helps, and thaks very much.
Ivan -
Is it bug/error from SAP on ESS - Personal Information-Address exit button
Hello Experts,
when i click on ESS - Personal information - Address exit button here when i click on exit button its opening another portal actually it should go back to same portal ESS - Personal information - Address
is this error/bug from SAP
if no what could be
could anybody help me on this issue.
Thanks
Regards
VijayHello Eperts,
Sorry, i want to reopen this thread, to clear one issue.
i tryed and solved this issue.
try to configre the workprotect in personalization so it discard changes and open in the same page.
all my portal user are facing the same problem.
my question is Do i need to do changes for all user in personaliztion.
Do we have any global chage at once i do it takes effect for all users.
Any help on this Please.
Thanksyou,
regards
Vijai -
Custom field in ESS Bank Information Screen in wrong location
We created two custom fields for WD-ESS Bank Information (1.41). These were added to the iView using Personalization.
Now it is apparent that the Statement text field needs to be above the Checkbox field in order for these to work correctly.
I have tried moving or deleting the fields in the Personalization screen from the iView with no success. Is this possible and if so, how is it done.
If not where on the backend would this be changed.
Thanks,
D. Maupin
University of Kentuckycheck here how it is done
http://wiki.sdn.sap.com/wiki/display/profile/ESSPersonalInformationUIenhancementwithoutmodification
and
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable -
Issue in ESS Personal Information iViews
Dear Experts,
I have an issue with ESS Personal Information details. The issue is the personal information related iViews such as Bank information , personal id, address iViews are only displays a road map and a button in disabled mode. Its doesn't display any data.
But my Employee search iViews are working fine.;
Any idea about this issue?
Thanks,
RamIm getting exactly like below in Bank information iView
[1] -
[2]--[3][4]--
Overview Edit Review and Save Confirmation
<Previous Step> <Exit>.
Please help me out!
Ram -
ESS Personal Information not working
Dear All,
Here we have ECC 6 and EP7 SP10, we have uploaded BP ESS 1.0 SP 7.
For ESS Personal Information workset, iViews for Address, Bank Information, Family Information and Personal Data is showing a page in which it is given steps which are
1 Overview 2 Edit 3 Review and Save 4 Confirmation
Previous Step Exit
And also in SPRO setting for Personal information under ESS head is missing
Employee Self-Service-->Service-Specific Settings --> Personal Data , there is no personal Data link.
Kindly help me what needs to be done for Displaying iViews of Personal information and getting the link for Personal Data in SPRO under Employee Self Service.
Regards,
Sidhartha ChatterjeeDear Awadh,
I am able to see Own Data in SPRO.
Issue is that while running Personal Information --> Address iView, the page which is being shown is like this
[1] -
[2]--[3][4]--
Overview Edit Review and Save Confirmation
<Previous Step> <Exit>.
and no data is being Displayed.
The same is the case for other iViews of Personal Information like Bank Details and Family Details.
But for Personal Data iView it is giving this error
"<b>failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'"</b>.
kindly tell me what needs to be done to resolve this issue.
Regards,
Sidhartha Chatterjee -
Hello, how are you? On September 13 I bought an iPad and in October bought a game on the app store problem is that when informed the card number dropped normally, but then went on to ask for a new form of payment because one had given any errors, and so not lowered any other game and not upgraded the already downloaded. I do not know what exactly I have to do, because if informed a new payment method continues with the same problem, checked the card bill and really had given an error, because there was no billed the game. I ask you to verify what happened and explain to me what I need to do, because my single card is Visa's and do not intend to return others to use the services of the App Store.
Thank you for understanding.I think you need the app store support. http://www.apple.com/support/mac/app-store/contact/ Go there and use one of the methods to contact them about your issue and they should be able to help you out.
This forum isn't checked by Apple employees but is for users to help each other out.
Phil -
Problem with updating card information
I've recently gotten a new debit card and am having problems updating my billing information. My CC account was originally created with my previous debit card. My new debit card is of the exact same type, a VISA, but, of course with a new number. However, when I try to update my card information it tells me that my new card is not of the accepted type. This doesn't make any sense to me because the card, as I stated, is a VISA and exactly the same as my previous card with which I purchased my account. Is anyone else having this problem or can anybody help me? Thanks.
It is happening to me too.
The only difference that mine is Mastercard. I get the Card not of accepted type message.
Chatting with the Indian support guy was unsuccesful, after 30 minutes, he/she was able to decide, that "your account is active"... Congratulations. When I asked what next,, I was promised that I will be called by another colleague the next business day. It was 4 days ago... Today I called the local support number, and it turns out it's just a distributor without the ability to help in this topic. I do not want to call an international support number, to spend n+10 minutes on the phone with an inferior helpdesk person to find out again, that "oooh yes, my account is alive".
@ameredith - could you get it sorted out somehow? -
ESS Bank Information -- IBAN field need to be deactivated
Hello All,
Currently on ESS\MSS portal when I go to the following link ESS--> Personal Information --> Bank Information --> Bank details (Edit) , I get to see the IBAN field.
Is there any way I can deactivated the field from getting displayed, if so how?.
One way to go at the WDJ level and download the respective par file and make the changes (please let me know if I am right).
Is there any other way of doing the same.
Regards,
Ronniee.Hello Venu,
Thanks for your kind inputs here , Yes we can do the same on the iView level on field or UI element, but if we want to hide field for all the given users , If I want to hide a field accross all the users , How will i do that.Since hiding a field for a given single user will only be applicable.
Regards,
Ronniee. -
Problems with ESS in Career and Jobs in Appraisal Document
HI
Iam Facing a problem in ESS career and job .
in Appraisal documnets
iam using BP ERP5 ESS1.41 sp6
and updated Common parts
My problem here is when i click the appraisal link the page for appraisal is opening with some records.but when i click on that record the appraisal template must be displayed,but my link is displaying an error in that page as page is not found.
i had done required OBN as of SAP NOTE 1416756 , 1408243.but my issue doesnt soleved
iam just postinga screen shot of that error
http://img80.imageshack.us/img80/8157/uiapraisal2.jpg
can u people help me in solving this issue.wat might be the problem and how to get trhe solution
pls help me as iam in very emergency with this issue
Bye
Waiting 4 responsesandeep, im still looking for you to provide the
URL of both pages in your screenshot.
Outside of a weird firewall issue or something, you have 1 of 2 issues.
1. Your OBN Target configuration you did in the notes is wrong. which means the target URL is not pointing to the iview properly.
2. Your iview for the sap page called appraisal_document is not in accessible in the correct content area.
here is the location in the standard SAP portal area, not sure if you copied and already using a custom ESS tab....
pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.14.bp_folder/com.sap.pct.erp.ess.14.iviews/com.sap.pct.erp.ess.14.career_job/com.sap.pct.erp.ess.appraisal_document_pmp
also, on the previous post, it was wrong the wrong webdynpro's that were told you. The POWL webdynpro's you already have access to, its when from that application you try to launch the document. You want to launch this webdynrpo, which is configured in the appraisal_document iview:
HAP_AC_PMP_MAIN - for predefined
HAP_MAIN_DOCUMENT- for flexible. -
How to add 'Known As' field in ESS- Personal Information...Please guide
Hello All,
I have to show the 'Known As' field in the ESS->Personal Information page/workset.
Do I need to use NWDI for the same?
Please guide me as to how I can do this.
Awaiting Reply.
Thanks and Warm Regards,
Ritu
Message was edited by:
Ritu HunjanSolved it on my own.
-
ESS personal information Nullpointer exception
Hi,
When I try to save data in any of the ESS Personal Information (like Personal data, addreses, etc) I get a nullpointerexception while saving. The data is getting saved but the navigation is not going to the next page. Any ideas?
Im on Portal 7.0 ECC 6.0 and ESS BP 1.0
java.lang.NullPointerException
at com.sap.xss.ser.xssconfview.vc.VcLinksView.wdDoModifyView(VcLinksView.java:167)
at com.sap.xss.ser.xssconfview.vc.wdp.InternalVcLinksView.wdDoModifyView(InternalVcLinksView.java:354)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
Regards
SriniSuresh,
I hace added the role Self Service admin to my user id. Now I see the FPM and sort of things under Content Provided by SAP. I am not sure what to do about it.
Is this a configuration step which needs to be done or does these things are come default on installation.
Regards
Srini -
ESS Personal information few fields are in english and few are in Slovakia?
Hi,
We have installed EP7.0, ESS600
Incase of ESS Personal information workset few lable texts are in english and few are in country specific language (Poland) in other words.
In ESS the language translation for the languages Polish (Poland), Hungarian (Hungary), Czech (Czech) and Slovakian (Slovakia) are not fully reflected. Some texts are not translated and it is showing in English.
Any helpfull suggestions please
Regards,
MuraliHi Bala,
This not for one user. This basically for country specific.
Thing is for few countries there are no personal data iviews available in Portal for example Polish (Poland), Hungarian (Hungary), Czech (Czech) and Slovakian (Slovakia).
Hence the work around is for these languages we used other existing languages for example for Slovakia ( India). But few UI fields (Lable text) are appearing in Slovakia and few are English.
What may be the reason? did anybody faced similar situation.
Regards,
Murali
Maybe you are looking for
-
Finding the end of a document using Scanner
I'm reading a file line by line, but cannot figure out how to read the end of a document without finding the number of lines in the document myself. When I have all of the lines printed out, I get an error at the end saying that no line could be foun
-
I'm using LiveCycle Form Designer 8 and Acrobat Reader 7.09 I've created a simple dynamic table that has an ADD ROW button that uses _Row1.addInstance(1); to add a new row and that works great. I then added the Delete Row button in a SubForm to the f
-
Calling a sub screen in MODULE user_command_9000 INPUT
HI, PROCESS BEFORE OUTPUT. MODULE STATUS_9000. CALL SUBSCREEN subscreen_9220 INCLUDING sy-repid '9220'. CALL SUBSCREEN subscreen_9240 INCLUDING sy-repid '9240'. PROCESS AFTER INPUT. CALL SUBSCREEN subscreen_9220. MODULE USER_COMMAND_9000. Inside MODU
-
Cisco Anyconnect Secure mobility client 3.1.03103
Hello everyone, we have a Cisco router 1841 and we have always used correctly the AnyConnect version-win-2.5.3055-pre-deploy-k9. Now, we have computers with windows 8 and we have to use the new version of AnyConnect (3.1.03103) because the 2.5 versio
-
Capture vidéo plante avec Bureau à distance (remote desktop bug on capture)
J'ai une carte d'aquisition vidéo blackmagic avec un caméras branché en hdsdi. L'ordinateur de capture est situé dans la salle des serveurs et je veut me connecter en "bureau à distance" pour démarer et arrêter la capture. Tout fonctionne bien sauf s