Problem in executing TCode IFCU
Hi Experts,
i am facing a problem in TCode IFCU,
i've done all required customization for the same,after entering a value on IFCU screen,
when i give save option, system flashed below mwntioned mesaage,
please suggest the solution,
Unit of measure L is not convertible to stockkeeping unit EA
Message no. M7026
Diagnosis
An error has occurred during conversion of the quantity into the various units of measure ( stockkeeping unit/alternative units).
System Response
The system cannot post the document.
Procedure
Contact your system administrator.
Thanks and Regards
Pravin
Hi,
yes sir problem was there in setting , Assign Auxiliary Materials and Consumables,for other material check was put in default check box was ticked for which UOM was EA,
but now other error message apperas as mentioned below,
Fld selectn for mvmt type 261 / acct 400050 differs for Cost center (010)
Message no. M7093
Diagnosis
Comparison of the field selection strings from movement type 261 and G/L account 400050 has revealed that there is an incompatible field selection combination at one or more points.
Field for which the field selection is different: Cost center
Example
On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed.
System Response
You cannot post this transaction, unless you have changed the field selection adequately.
Procedure
Contact your system administrator.
Action to be taken by the system administrator
Check whether any postings resulting from this movement type are to be made to the G/L account determined automatically. If you find that the G/L account is not correct, check the automatic account determination in the Customizing system for valuation.
Proceed
If the G/L account is correct, use the report RM07CUFA to compare the field selection for the movement type with the field selection for the G/L account and change the incorrect settings or the field status group of the G/L account.
Proceed
Best Regards
Similar Messages
-
While executing TCode F13 and F13E, purchase order number is not appearing.how it should be displayed into tcode f.13, what are the requirements need to display into tcode f.13, please any one help me, i am facing this problem in production server
Hi Nattu,
Please check it will show the PO no under Purchasing doc field
Check which layout you are applied.
its should be
SAP&F124
Without Specification of Crcy
Regd,
Khan. -
Problem in executing the adobe form
Hi,
Using the SFP tcode i have createda an interface and a form for that interface.
i have to import parameters from vbap table which i have mapped in the form..there is no problem while executing and activating the form...
but while i am executing the form after passing the values i am getting an exception : SYSTEM ERROR
Meassage ID: FPRUNX
ADS: SOAP Runtime Exception: CSoap Exception Transport.
Are the forms craeted using SFP tcode are Standalone forms i.e. non-interactive forms?Hi friend,
Its not like that the Adobe created using SFP is non interactive.
We can create interactive forms using SFP transaction using java code.
I think it will be the problem with ADS just check with your basis people i think they will configure you the settings which works fine.
To check whether the settings are perfect you can try executing the standard programs FP_TEST_00 and
FP_PDF_TEST_00. If it works fine then some other problem exists else check with your basis team.
Just check this and revert me if you have any issues. I will help you
Thanks,
Sri Hari -
Hi Forum,
When i execute tcode SPROXY in a R/3 system, maintained as Business system in XI, it prompts for user name and password,
can u pls tell me why this happens....
I have maintained all required RFC destination in the R/3....Hi,
I have come across the same problem.. Where username and password was maintained properly.. But, the RFC was not present in R/3 itself....somehow it was got deleted.. So, plz ask the basis to check that also..
Regards. -
Re: [iPlanet-JATO] Experiencing problem while executing model.
Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed] -
Error while executing tcode FSE2 "Internal error in program SAPLFIBS no 5"
I am getting below error which while trying to execute tcode FSE2 (Financial statement version). Can't able even go inside the tcode. Please tell how to solve this.
"Internal error in program SAPLFIBS number 5"Hi Dsr,
Use transaction code <b>OB58</b>->Highlight the Fin. Stmt. version you want to Change and click on the <b>Display</b> icon.->Next, click on the "<b>Fin.Statement items</b>" icon on the application tool bar. You can then expand and carry out your update as appropriate.
If you do not have the prerequisite authorisations, you wouldn't be able to do this.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob -
ABAP Dump when executing tcode CATS_APPR_LITE for multiple selection.
Dear Members,
Issue:
When executing tcode CATS_APPR_LITE for Time Approval from the remote R/3 by selecting multiple selections and click on Approve, if you get a dump saying CALL_FUNCTION_REMOTE_ERROR
Analysis:
If there is an SAP Note applied in 1368487 and at CALL FUNCTION CATS_CHECK _PTEXDIR FM getting the dump because in source system for this function module Remote Enabled Module option is not checked.
To resolve this correction note 1430042 has to be applied.
Regards
DurgaDear Members,
Issue:
When executing tcode CATS_APPR_LITE for Time Approval from the remote R/3 by selecting multiple selections and click on Approve, if you get a dump saying CALL_FUNCTION_REMOTE_ERROR
Analysis:
If there is an SAP Note applied in 1368487 and at CALL FUNCTION CATS_CHECK _PTEXDIR FM getting the dump because in source system for this function module Remote Enabled Module option is not checked.
To resolve this correction note 1430042 has to be applied.
Regards
Durga -
Problem While Executing T.CODE DP90
Hi,
We have Upgrade our system from 4.6C to ECC6.
We are facing following problem while executing Resource Related Billing request
Through Transaction code DP90.
Process.
1. We are creating Sales Order and system will create Service order automatically as per the configuration.
2. In service order we have External as well internal operations ,
Internal operations will be confirmed through IW41, and External Operations we are creating Purchase Requisition then creating PO and MIRO,
After all Operations confirmed we will make Service order status as technically completed, then we are executing DP90 for Resource Related Billing, System will determine the material, combination of Cost element and Activity Type (Which is configured in T.Code ODP1) For External Operations System is Considering Activity Type for material determination in 4.6c but it is not considering Activity Type for Material Determination in ECC6 for External Operations.
Please Help me,
Edited by: D B on Apr 29, 2008 6:13 PMHi Prashanth,
Thanks for your reply, but all activity are valid in current period, in our Scenario in the old system for External Operations with combination of Activity type and Cost element system is determining material but where as in the new system for external operations it is not considering the Activity type and system is determining the material in the combination of Cost element and Blank activity type so, we are getting different material in DP90. -
Problem in executing JFCunit test case
Hi all,
I have problem in executing a simple test case that checks for input blank fields entered.
Below is the code for the test class that i am trying to run, but i am unable to execute it. Please can anyone try to resolve this.
package unittest.com.erp;
import junit.extensions.TestSetup;
import junit.extensions.jfcunit.*;
import junit.extensions.jfcunit.finder.*;
import junit.extensions.jfcunit.eventdata.*;
import junit.framework.Test;
import junit.framework.TestSuite;
import junit.textui.TestRunner;
import com.erp.client.swing.ClientLoginDialog;
import com.erp.client.swing.workspace.ClientWorkspaceFrame;
import com.erp.client.swing.workspace.data.LoginResults;
import javax.swing.*;
public class LoginScreenTest
extends JFCTestCase {
private ClientLoginDialog loginScreen = null;
private JButton login = null;
private JButton cancel = null;
private JTextField username = null;
private JTextField password = null;
private JFCTestHelper helper = null;
LoginResults loginSuccess = null;
ClientWorkspaceFrame workspaceFrame = null;
public LoginScreenTest() {
public LoginScreenTest(String name) {
super(name);
public static Test suite() {
return new StartApp(new TestSuite(LoginScreenTest.class));
private static class StartApp
extends TestSetup {
* Construct the test decorator, which starts the application *
* @param test
* Test case.
public StartApp(final Test test) {
super(test);
* Start the LoginScreenTestapplication.
public void setUp() {
new Thread(new Runnable() {
public void run() {
try {
new LoginScreenTest().setUp();
} catch (Exception e) {
}).start();
try {
Thread.currentThread().sleep(10000);
} catch (InterruptedException ex) {
* Tear down the LoginScreenTest application.
public void tearDown() {
protected void setUp()
throws Exception {
super.setUp(); // Choose the text Helper
setHelper(new JFCTestHelper()); // Uses the AWT Event Queue.
// setHelper( new RobotTestHelper( ) ); // Uses the OS Event Queue.
ClientWorkspaceFrame workspaceFrame = ClientWorkspaceFrame.getHandle();
// loginScreen = new ClientLoginDialog( "LoginScreenTest: " + getName());
loginSuccess = ClientLoginDialog.login();
loginScreen = ClientLoginDialog.login(new JFrame(), true);
if (loginSuccess != null && loginSuccess.isSuccess()) {
workspaceFrame.initFrame();
workspaceFrame.loggedInUser = loginSuccess.getName();
workspaceFrame.loggedInFullUserName = loginSuccess.getFullLoginUserName();
workspaceFrame.loggedInUserPassword = loginSuccess.getPassword();
workspaceFrame.setVisible(true);
workspaceFrame.validate();
flushAWT();
protected void tearDown()
throws Exception {
login = null;
cancel = null;
username = null;
password = null;
loginScreen = null;
flushAWT();
// getHelper.cleanUp( this );
super.tearDown();
public void testInitialState() {
NamedComponentFinder finder = new NamedComponentFinder(JButton.class, "Cancel");
finder.setName("Cancel");
JButton exitButton = (JButton) finder.find(loginScreen, 0);
assertNotNull("Could not find the Exit button", exitButton);
NamedComponentFinder finder1 = new NamedComponentFinder(JButton.class, "Login");
finder1.setName("Login");
JButton enterButton = (JButton) finder1.find(loginScreen, 0);
assertNotNull("Could not find the Enter button", enterButton);
getHelper().enterClickAndLeave(new MouseEventData(this, enterButton));
assertEquals("", workspaceFrame.loggedInUser);
assertEquals("", workspaceFrame.loggedInUserPassword);
public static void main(final String[] args) {
TestRunner.run(LoginScreenTest.suite());
Thanks & Regards,
VishalMessage was edited by:
vishal_vj
Message was edited by:
vishal_vj
Message was edited by:
vishal_vj
Message was edited by:
vishal_vjhi All,
can any one guide me how to run the test casese in JFCunit ? as when i tried to run thru command prompt its not recognising the main class at all.
Now i m trying with eclipse problem here is that it is showing error to this line of code
DialogFinder dFinder = new DialogFinder(loginScreen);
error is constructor is undefined?
So looking for some solution.
with regards
kin -
Problem in executing a javascript link on a jsp page
I am having a problem in executing a javascript function from a link. For example if i click some link let say Discover and behind the scene some applet method is supposed to be called, but it is not called? However the the function name comes in the url area (address bar of internet explorer) like javascript:document.switchApplet.discover()
Can anybody help me solving this problem?
Moreover, just for a hint, i think i have deleted some registery value of such time so that's why it is not working. But i am not sure.what is d error u r getting ???
Is it java script error? yes then u can find the line no.
view the source code or ur page and find whether ur .js is including properly or not? means whether the path is correct ? -
Problem in executing EXE from browser-URGENT
Hi all,
I am facing a problem in executing "c exe" file from my web based application, iam using IAS
on Solaris. my program is able to catch the path but its not executing (this is wirking fine in windows) i am giving a sample code here
Runtime rt=Runtime.getRuntime();
Process pro=rt.exec("/datadisk1/java/runsol.exe");
pro.waitFor();
runsol.exe will generate s text file when executed, when i run this in a independent java program then it is executing, on browser it is not executing and output text file is not creating.
Note: i am working on Solaris / Oracle AS 9i
Thanks
Bye.Security issue. Calling .exe from applet not possible by default.
-
Unable to execute tcodes SOLUTION_MANAGER , SMSY in solution manager 4.0
Hi Dear All,
I have recently installed solman 4.0 in windows
It contains the fallowing support packs.
SAP_BASIS 700 0011
SAP_ABA 700 0009
PI_BASIS 2005_1_700 0009
ST-PI 2005_1_700 0002
SAP_BW 700 0009
SAP_AP 700 0006
SAP_HR 600 0007
SAP_APPL 600 0006
Here i want to configure Manintainence optimiser and unable to execute SOLUTION_MANAGER , DSWP, SMSY.
Can any one please help me how to proceed with the current situation.
I havent done anything after the instalation ( Just applied support packs 1008717 and 975872.
Thanks In Advance,
Regards,
Vamsi
Edited by: vamsi koganti on Jan 1, 2008 11:19 PMHi Dear All,
I have recently installed solman 4.0 in windows
It contains the fallowing support packs.
SAP_BASIS 700 0011
SAP_ABA 700 0009
PI_BASIS 2005_1_700 0009
ST-PI 2005_1_700 0002
SAP_BW 700 0009
SAP_AP 700 0006
SAP_HR 600 0007
SAP_APPL 600 0006
Here i want to configure Manintainence optimiser and unable to execute SOLUTION_MANAGER , DSWP, SMSY.
Can any one please help me how to proceed with the current situation.
I havent done anything after the instalation ( Just applied support packs 1008717 and 975872.
Thanks In Advance,
Regards,
Vamsi
Hi ,
Sorry actually the error is ( The software component of ST is not present)
As there is no ST Software component i am unable to execute tcodes mentoned above.
Can any one help me how to install the ST software component.
I tried in the market place to look for instalation steps but i cant find any.
Please help me guys.
Many thanks,
Regards,
Vamsi.
Edited by: vamsi koganti on Jan 2, 2008 8:19 AM -
Trigger a background job after executing tcode MMPV
Hi All,
I would like to trigger a background job after executing tcode MMPV. In MMPV, after closing a particular period and entering
new period, the transaction will be saved. After saving, the background job should be triggered. How to do it?
Regards,
VinodDepending what system you are on your best bet would be to create an enhancement point inside a form, that is called after the save has been performed, and raise an event within that form.
Events can be used to trigger background jobs are maintained in transaction SM62.
Cheers. -
Hi all,
I am getting an error I can't solve until now.. Who can help?
The Default Trace in the EP 7.0/NWA gives the following information:
Severity: Error
Message: Problem in executing function module:[date]:com.sap.mw.jco.JCO$AbapException: (126) ERROR_IN_PDO: ERROR_IN_PDO
Category: /uwl/service
Location: com.sap.netweaver.bc.uwl.core.connect.abap.FunctionModuleActionHandler
Application: sap.com/tcwddispwda
The UWL connection tests are correct! So, who can help!
There is nothing to find in sap notes or sdn forum
Best regards,
G. LeursHi john,
I am also facing hte same issue.
when the user is trying to approve the Compleated shopping cart from the button availble in the UWL preview , I am getting the below error.
Exception type:com.sap.netweaver.bc.uwl.connect.ConnectorException Message:Wed Aug 25 12:16:52 CEST 2010 (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Wed Aug 25 12:16:52 CEST 2010 (Connector) :com.sap.mw.jco.JCO$AbapException:ERROR_IN_PDO
we are not passing any ABAP role from teh SRM system.
it would be great if you can share your views regarding this.
Raji -
Expdp problem when executing from pl/sql transportable tablespaces
Hello
i have a very strange problem for which your assistance is really appreciated. i am applying the transportable tablespaces approach and i have a problem when executing expdp from commandline in comparison to the procedure generated to make the exact same thing.
more precisely when running:
expdp etl/etl dumpfile=TBSP090609_DMP.dmp logfile=TBSP090609_DMP.log directory=EXPDP transport_tablespaces=TBSP090609 transport_full_check=y
the dmp file produced is over 200MB.
when runng the below pl/sql code the volume produced is around 50MB. any idea what i am missing?
job_handle :=
dbms_datapump.OPEN (operation => 'EXPORT',
job_mode => 'TRANSPORTABLE',
job_name => 'export_tablespace',
VERSION => 'COMPATIBLE'
dbms_datapump.add_file (handle => job_handle,
filename => dump_file_name,
DIRECTORY => export_dir_name
dbms_datapump.set_parameter (handle => job_handle,
NAME => 'TTS_FULL_CHECK',
VALUE => 1
dbms_datapump.metadata_filter (handle => job_handle,
NAME => 'TABLESPACE_LIST',
VALUE => '('''
|| tablespace_name
|| ''')'
dbms_datapump.start_job (job_handle);thanx you for your response. the problem was eventually managed to be resolved as follows:
job_handle :=
dbms_datapump.OPEN (operation => 'EXPORT',
job_mode => 'TRANSPORTABLE',
job_name => 'export_tablespace',
VERSION => 'COMPATIBLE'
dbms_datapump.add_file (handle => job_handle,
filename => dump_file_name,
DIRECTORY => export_dir_name
dbms_datapump.set_parameter (handle => job_handle,
NAME => 'TTS_FULL_CHECK',
VALUE => 1
dbms_datapump.metadata_filter (handle => job_handle,
NAME => 'TABLESPACE_EXPR',
VALUE => 'IN('''
|| tablespace_name
|| ''')');
dbms_datapump.start_job (job_handle);
Maybe you are looking for
-
I Bought a new macbook air and it won't charge my phone. This is the second laptop ive gone through as i got a replacement one only two days ago for the same problem. I need to be able to connect my iPhone so I can download songs etc from iTunes onto
-
Airtunes will not play sound from youtube
Hi, I have just bought Apple PC for myself. It Works flawlessly, except for one thing. I can play radio or podcasts, but I just can't seem to get trhe sound from youtube videos or movies to play through airtunes. The logic seems to be thatsounds from
-
Third party sales clarification.
Hi Gurus, I want clarification on Third Party Sales. Assume that Customer Ordered 10 Qty, Suppose If Vendor delivered 9 Qty to the Customer. With the same 9 Quantity he Billed Us. Now we have to Bill the customer with 9 quantity..How it happens? Sha
-
Dynamic Link on Separate workstations cs6?
I am an editor working through a server with a motion graphics artist. We are trying to use dynamic link so that when the AfterEffects artist makes a change to the file, it's automatically changed in my edit. However, when working on two separate s
-
Windows % QT 7.7.6: How to associate file types
How do I make certain file types always open with Quicktime? I tried to do it through windows, but I cannot find the Quicktime executable because the QT shortcuts don't list the filepath. I tried to do it through Quicktime control panel and/or prefe