Problem in Exporting Webi Report to Excel

Hi,
I have developed a WEBI report in BOBJ 4.1 SP1 on top of IDT Universe and applied Drill Down analysis.
While exporting the WEBI Report to Excel, I'm getting Images in the place of columns where there is no data.
However, images are not getting in the columns where we have data.
Please suggest as this will help me a lot.
Thanks & Regads,
Prasad.

Hi,
1) Check if there is any conditional formatting applied.
2) Check in the fomat cell --> Appearance .

Similar Messages

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Exporting Web Report to Excel - SAPBW_DOWNLOAD

When exporting a web report to excel it uses the embedded SAPBW_DOWNLOAD template. Is it possible to use and assign a seperate template like the one I'm currently using for Workbooks.
--KAL

Hi,
I don't understand what do you mean here. Do you mean we could not reduce size in the first time? We have exactly the same problem and the file size is about 20-40 MB. This size is too big to download by end user. It's excel file with .xls extension. When I open it by Excel and then try to Save As, it try to save as Web Page with *.htm extension. If I resave as a Excel Workbook format, the size is reduced to 3-4 MB. My question is the same as the other folk, how do I save it as Excel format with proper size the first time?
Thanks,
Yujun

Company Logo went off while exporting WebI Report to Excel in BO4.1

Dear All,
I am working on BO 4.1.
When I am trying to export the WebI Report to Excel, I am not able to see Company logo, had this feature been added in BO 4.1 or not yet?
If available please guide me on how to get this logo in Excel?
Best Regards,
Sonal

Hi Sonal Neema,
Check the below link this will help you to resolved your issue.
http://scn.sap.com/thread/3286244
Regards,
Anish

Problem in exporting ALV Report to excel sheet

Hi All,
I have developed a Report and now facing problem in exporting the same to excel sheet.
When we click the "Locate File" icon in the report layout, the system will pop up a window with radio buttons. I have opted for 'Spreadsheet'.
When i save the excel sheet into my desktop, the excel file has all the report headers (Title of each column). But no value is exported.
There are around 15 columns in the report and the excel sheet shows value of last 2 columns which has some text.
I have been into ALV report development and developed around 30+ reports in the same fashion.
What might be the reason behind this issue?
When i export other reports into excel sheet, everything is perfect without any flaws......
Kindly help me out......
Regards
Pavan

Hi,
Here's my suggestion: Install OpenOffice.org and ask SAP to deliver good integration with OpenOffice.org.
Alternative suggestion: re-install SAP Gui on the PC where the integration is not working. If that does not help, re-install Microsoft Office as well.
Here's my comment: I think you should ask this question in a different forum, e.g. in the Duet forum. That may not be the correct forum either, but as it is a Microsoft/SAP integration technology forum, someone there may know the solution.
Regards,
Raj.

Image Display Problem while exporting jasper report in EXCEL

Hi
I am using Jasper reports for my reporting work using java code.
when i export my report in PDF then , report is ok and displaying Image properly.
but when i export my report in EXCEL then , there is no image in my report, rest part is fine.
Can anyone please help me in getting image in excel format also.
thanks in advance
Praveen

I have not any problem in picture or logo.
But I have an another problem.
My Excel format produce multiple column,that is unefficient format.
If you have not this problem please mail me at --- [email protected]

Problem Exporting Webi report to Excel in Edit mode

I have posted this question on BOB forum [http://forumtopics.org/busobj/viewtopic.php?t=189429&sid=8539bfcc4dbbf782ba1a9950085373ed] and found no response so I am cross posting here.
I have two environments: Enterprise XI 3.1 SP2 and Enterprise XI 3.1 SP3 FP3.6. On both instances when I open reports in web intelligence and try to export it to excel (using Save to my computer as Excel) I will get a "file download" dialog box asking me if I want to open, save or cancel. However when I am in Edit mode I get the same options to save/open only in the first instance(SP2), what I get in sp3 is a somewhat different "save docuemnt" dialog box (with a save as type all files not explicitly excel), doesnt allow users to open at all. I need your help to get the file download option to open/save when i export reports to excel in the second instance too. BTW it works fine for PDF export.
Thanks.

Please check if matches this behavior and if the suggested solution works
[1467147 - Neither File Download dialog box is shown, nor error ERR_WIS_30271 occurs when saving the Web Intelligence document as Excel file in Java Report Panel after Binary Stream Maximum Size has been reached |https://service.sap.com/sap/support/notes/1467147]
Worth to have a look also to this KBA for higher SP levels
[1665049 - Save behavior is inconsistent in BusinessObjects Enterprise XI3.1 SP4 |https://service.sap.com/sap/support/notes/1665049]
PS: Just noticed also that there is a bug ADAPT01568649 for which the option for saving as Excel doesn't appear.
This is fixed in FP3.7
Thanks!
Simone
Edited by: Simone Caneparo on Feb 13, 2012 9:18 AM

Repeating row texts when exporting web report to Excel

Dear all,
When exporting a web report (including a structure/hierarchy) to Excel (via the 'export to excel button), the row texts (e.g. balance sheet texts) appear twice (column A and B)in the Excel result.
When using the web context menu 'Export to Excel' this issue does not occur.
I am using a BW 3.5 system which has been upgraded to support pack 16.
I assume it is the combination of the structure and the 'export to excel' functionality that does not match up, because when I switch off the hierarchy functionality in the web report query properties, the export to excel does not give me any problems.
Does anyone know how to solve this issue?
Thanks in advance,
Arjan.

Did you write that software, COTS package called Medgate?
If not then ask that company for support. No one here would know how to fix it. They are using the CR RDC report engine.
Thank you
Don

Formatting error while exporting webi report to excel

Hello,
I have a webi report which I have to export to excel . I have the header and the body both in the body of the report. I have the sections in the report and the report has about 40 coloumns. After converting to excel all the coloumns are being minimized automatically , I am having to manually expand each coloumn in excel to see the data.
I am using Busines Objects 3.1 sp3.
Can anyone please help!
Thanks

Hello,
Check the properties of the columns in Webi. If they are set to automatic width, this may be causing the problem.. Sections may also have something to do with it. Make a copy of the report and play with the things mentioned above, and see what results you get. This may point you to the problem.
Also look at the option in properties to export to excel where it considers format over data. It is an option in document properties if I remember correctly.
Thanks

Problem in Exporting FAGLB03 report in Excel

Hi,
We have recently done upgrade from ECC 5. to ECC 6.0, first we have the problem related to When we download data to Excel in MHTML format it is adding additional zeros to all the total / sub total lines. But when I download it to excel it is not adding any additional zeros. Please could any one help me how to fix this issue?
Ex: if I have 133.38 in total, in MHTML format it is showing 1333800000.00 but in excel it is showing as 133.38.
To resolve this i have entered parameter id SALV_BS_XML_VERSION with parameter value 2.2 in user's profile.
Now we are facing other problem at the time of exporting FAGLB03 report to XML format we have set 5 decimal places for GBP currency, while exporting to XML the system shifts decimal places below example will clearify bit more
E.G - Actual figure is 11,976,609.60788 but in XML format decimal places shifted 11976609607.88
Please help me in this regards,
Sany..

Hi,
The solution in the note is :
Solution
SAP NetWeaver 7.00
Import Basis Support Package 21.
SAP NetWeaver 7.01
Import Basis Support Package 6.
Alternatively, please implement all of the followings notes to solve the problem:
1391325
1393974
1394178
1400534
So, you have implemented one of the notes in the alternative solution, please check.
We had the same issue and BASIS implemented this note and this got resolved.
Regards,
SAPFICO

Export webi report to excel print on 1 page

is there anyway in BO for a webi report when exported to excel to automatically print on one page?
THe work around is to set the print area in excel itself wondering if it can be done in BO itself
BO Edge XI 3.0
SQL 2005

Hi Dennis,
BO usually prints documents the way they appear in PDF format. Hence, if you would like the report to be printed on 1 page, make sure that the report fits into 1 page in the PDF layout (Page Layout) mode of the report.
Regards,
Srivatsa

Problem with Exporting crystal report to Excel

Hi !
I am new to crystal world. I have an application which has csp code. From the csp code (internal website) we invoke crystal using viewer.cwr to view or export reports. Last week we upgraded from Crystal 10 to Crystal Reports XI Release 2. Due to this upgrade we did some modification to the Viewer.cwr url ( Changed to Viewer.asp too). Now the View option is working fine but when the report is exported to an Excel the columns are squeezed up.
Here is the code for the viewer.asp :
ExcelWindow = window.open("http://servername/crystalreportviewers115/viewrpt.asp?id=" + id + "&apstoken=" + escape(token) + <%Response.Write("'"&sReportLogin&"'")%>'&promptex-REPORTDATE='pRptDate'&promptex-State='pState'&promptex-usertype='pUserType'&promptex-startreport='pStartpSelect'&cmd=export&export_fmt=U2FXLS:3&',"ExcelWindow", windowprops);
Is there any way to solve this formatting issue ? I tried changing the export format option as "export_fmt=U2FXLS:4" but this pulled up the data with the report header and sub heading in one row. Please help.
Nandita

Hi Kedalene,
Please check below links.
Microsoft Visual C++ Runtime Library:
VC++ runtime error
C++ Runtime Error when installing addons | SCN
Hope this help
Regards::::
Atul Chakraborty

Exporting a web report to Excel

Hi,
When I export a web report to Excel, it works fine. when I resave the same file as .xls file, the excel file size is reduced drastically (less than 1/10).
Why is this happening? Any way to reduce the file size in the first stage, that is down loading to Excel from web.
Thanks
Unni

Hi,
I don't understand what do you mean here. Do you mean we could not reduce size in the first time? We have exactly the same problem and the file size is about 20-40 MB. This size is too big to download by end user. It's excel file with .xls extension. When I open it by Excel and then try to Save As, it try to save as Web Page with *.htm extension. If I resave as a Excel Workbook format, the size is reduced to 3-4 MB. My question is the same as the other folk, how do I save it as Excel format with proper size the first time?
Thanks,
Yujun

Exporting Crystal report into Excel with code

I have written the following code to export crysal reports to excel. My problem is, when it exports number it adds the thousand seperator (,), but if I export the report from Crystal designer, it works fine. So I believe I am missing something in my code. Could some one help me with this? Any help is greatly appreciated.
       Dim xlApp As Microsoft.Office.Interop.Excel.Application
        Dim xlBook As Workbook
        Dim myReport1 As New ReportDocument
        Dim reportPath1 As String = ""
        reportPath1 = "C:\test\su.rpt"
        myReport1 = New ReportDocument
        myReport1.Load(reportPath1)
        Dim tmpExcelFile As String = ""
        tmpExcelFile = "C:\test\test.xls"
        myReport1.ExportToDisk(ExportFormatType.Excel, tmpExcelFile)

Hi Don,
Please provide
- Crystal Reprots version
- Visual Studio version
- Win or web app?
Try using 'ExportToStream' see if it reproduces the issue.
[1198587 - How to export a report to stream in C Sharp (C#) for Visual Studio .NET |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393338333533383337%7D.do]
- Bhushan.

Cells merge issue when extracting webi report in excel format

Hi Experts,
We have some WEBI reports in BO XI 3.1.
The reports have header where we are showing report name and some values which user selects in prompt.
Now the issue is that when we save our webi report in excel format, many cells get merge.
I have read many post on scn which suggest some solutions like changing the autofit width option to no and aligning the header width with colums.
Tried both the option but no success.
Is there any other way to achieve this.
Thanks in advance,
Regards,
Rishabh

Hi,
We managed to find the workaround for this merge cell issue.
Sharing it might be helpful for someone.
- Align the report name and other block in report in such a way that the ends are in line with the end point of any column. The only limitation is that when applying pivot to the excel output we neet to click on any of the ccolumn so that excel identify the data set.
- Second workaround is to break the webi document in two parts report1 will contain the report name and the block to show the prompt values selected by the user where as report2 will contain the table withactual data. The only limitation with this workaround is that when exporting the repot output to excel we will get two tabs in the excel sheet one containing the prompt values and secont tab containing the actual data.
Regards,
RS

Problem in Exporting Webi Report to Excel

Similar Messages

Maybe you are looking for