Problem in extended Transport control while setting up transport request.

I created a BDC program which will create a database table upon executing..
The problem is the program worked well since yesterday, But today when i executed it , it is showing a information message when creating a new transport request .
Extended transport control is not active:
Cannot specify target client
Since it s a recording ,and all the windows are processed using an OK CODE, this info box comes all of a sudden .I dont kno what went wrong , coz it was working fine the previous day.
i could not create a new workbench request even after ignoring that info message.
Pl suggest me what could be wrong.

This message has a long text, please read it.
Check with your system administrators, if they have changed anything regarding the transport process.
In addition, instead of using "fragile" recordings, try using function modules like DDIF_TABL_PUT.
Thomas

Similar Messages

  • PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

    Dear all,
    I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
    I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
    Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
    Helpful contribution will be duly rewarded.
    Thanks & Regards,
    VICKY

    hi
    vicky just went through your Query regarding release
    of requests..first of all U be sure of TMS configuration
    see whether it is consistent or not.then after Refresh
    the system and then come to release of requests.
    its true that we can transport through scc1 but first
    check about STMS configuration and the way you set
    that.
    Regards
    manjula.

  • Problem with the transport request

    A request was released to Prod.
    In D and Q the request is success but in P it shows one error..
    so, we tried to create a new request and copy the objects from the old one.
    but v r gettiing the objects not below the task(in req) but below the req..
    so it is not possible for me to release it.
    I also tried to edit the code , but when i saved it it is not asking for a new request. is it bcoz old req is released to P?

    Hi,
    In production system, it is showing an error in the logs while transporting : Generation of Programs and Screen and return an error code 8. there are no repositary objects to transport. this is just simple code modification. In Quality and Dev system, transportation was done successfully with out causing any problem.
    So, we tried to create a new transport request by editing the code in development.however it is not asking for the new transport request number while saving or activating.
    Also, we tried to create a new TR manually using SE09 and placing the modified objects under the task. but, transport request and task number are getting created at a time and while assigning the objects, the objects are under the request not under the task.the objects should be under the task only.
    this is the problem what exactly we are getting. Please clarify..
    Thansk!!!

  • Problem with "Create Transport Request"

    Hi all,
    Iu2019m working with Solution Manager and Charm. I have a problem when I create a transport request.
    After that I put regular correction into status u201CIn developmentu201D I choose u201CCreate Transport Requestu201D from the menu but the system display the message u201CThe last action triggered is locked in the task listu201D  . Is it a problem of authorization in satellite system? The user that I use to create a transport request have sap_all profile in the satellite system. What settings do I have to use in satellite system and in solution manager?
    Thank in advance
    giovanni

    Make sure that the profile S_TMW_IMPORT and S_TMW_CREATE has the correction authorizations assigned and that it is assigned to the user TMSADM of client 000 of your satellite system.
    Note 807228 can be useful.
    Hope this helps,
    Roel

  • Problem in moving transport request

    Hi,
    While performing transports at OS level, we are facing some error.
    below is the log. Please look into this issue.
    We have already trigged manually RDDNEWPP and
    SAP_TRIGGER_RDDIMPDP from client 000
    >tp import pf=TP_DOMAIN_FD3.PFL FD3K915202 FT3 CLIENT=010 U01268
    This is tp version 372.04.08 (release 700, unicode enabled)
    Warning: Parameter DBLIBPATH is no longer used.
    ERROR: The following call returned with exit code 236:
    ERROR: sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
    ERROR: Background jobs cannot be started.
    ERROR: Please check trace file dev_evt.
    We have also manually triggerred RDDIMPDP via sapevt from OS level. But issue still persist.
    There is no error in Import log and import history. But we are getting the below error in slog.
    WARNING: System FT3. Warning.        20090602114617 :
    ERROR:       The following call returned with exit code 236:
    ERROR:         sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
    ERROR:       Background jobs cannot be started.
    ERROR:       Please check trace file dev_evt.
    WARNING:       (This warning is harmless if no further warnings follow.)
    The error in dev_evt is as follows:
    Tue Jun  2 09:51:58 2009
    Trace File of External Event Raiser (Level=2, Append=0)
    EventID: SAP_TRIGGER_RDDIMPDP
    ERROR ***: Cannot determine mshost
    Please suggest..................
    Thanks,
    Sourav Misra

    I have resolved the problem........
    As per SAP note 821875 point 2(Security settings  in the message server), MSEACCESSDENIED (or rc= -20)  errors message can  occur if the parameter rdisp/msserv_internal is not  defined with 0 value
    We have removed rdisp/msserv_internal from instance  profile, and add it again in the DEFAULT profile with 0 value. Remember that, after this, it's important to check that the value has  been correctly   changed in the correct file DEFAULT.PFL
      After this, we have  restarted  the instance.
      I have attached also the following SAP note for  information:
      826779 - sapevt (Version 5): Security settings in the  Msg.g.
                            Please maintain the RDDIMPDP in all clients with user
                            DDIC in accordanceof note 11677. Goto SE38, use RDDNEWPP
                            to schedule RDDIMPDP on client
                            000 and other client with DDIC user.
    Thanks,
    Sourav Misra
    IBM

  • Problem in Releasing/Transporting Request from Cust & Development Client

    Hi,
    I had made up a report and i trying to transport it into the PRD Server but the problem when i use Tcode SE09 and there i clicked on the su-request ID it got released and when i clicked on main request ID it has givne run time error. But again i execute the transaction code SE09 and tried to realease the main request ID ,it is not allowing me to do it as a Message displays :-
    Task DEVK904185 has the status "Release started"
    I dont know why it is happening ? I had relaesed a lot of request before but never faced a problem like that.
    Please guide me how to solve this tranport problem..
    Edited by: nav009 on Dec 23, 2009 7:46 AM

    Hi Juan,
    The error which had came during the releasing of main request id was:-
    Short text
        Operating system cannot close file "\\piic071\sapmnt\trans\tmp\DEVE904185.DEV"
    What happened?
        Resource bottleneck
        The current program "SAPLSLOG" had to be terminated because
        a capacity limit has been reached.
    I am currently at display mode of request in which there is a tab named object in which there are 2 lines present. These are:-
    1. Comment Entry : Released ; Program ID : CORR(Comment Automatic) ; Object Id:  RELE(Comment Entry: Released);
         Object Name:  DEVK904186 20091223 115834 ABAPER
    2.  Program.Program ID : R3TR(OBJECT) ; Object Type : PROG ; Object Name: ZBDC_MM01_R1ZBDC_MM01_R1
    The package which we use is ZABAP which is used to transport all the creations and modifications it to the PRD Server...
    Is there any way of solving this issue......

  • Problem in Importing Transport Request

    Hi Everybody,
                     I have a Problem in Importing a Change Request .  Yesterday ABAP person  had Released two change request from DEV to PRD. I imported the 2. i got successfully  imported but another one  is still importing( status:Truck symbol)
         after that i have imported many Request in PRD server, except this one. how to stop importing this? what may be the reason?
    Regards,
    Siva

    Hi Siva Kumar,
    You can reset the status of that transport.
    Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
    Best Wishes.

  • Query regarding extended transport control

    Hi All,
    I read about extended transport control and I get very confused.What exactly it means.
    I have a 3 clients in my DEV system xx0,xx1,xx2, only one in QA and one in PRD.
    Now when searched I found..
    'when you release a change request in DEV Client xx0
    it will not only automatically be added to the Import Queue for QAS but also xx1,xx2 of DEV'.
    We donot have extended transport configured but still I can see same number of request in the import
    queue of all the 3 DEV clients.If the above is right then why is this happeing with my landscape or
    have I missunderstood it?
    We use Tcode SCC1 to copy client dependent request in other clients. So if an extended transport
    is maintained, will that happen automatically?If not then how extended transport is useful.
    Please share your ideas and help me.
    Regards,
    Ashutosh

    Hi Sharath,
    Thanks a lot for ttaking out your time to help me.You said
    Mostly this kind of set up will be helpfull in scenarios where there are more than one
    client in QA and PRD systems as becase if you release a request in development system and
    if you are having three clients in QA systems, then you will transport the request in one client
    and say if you need to have the same kind of changes in other two clients also then you need
    to manually use SCC1 and copy the changes if extended tranport is not configured. If extended
    transport management is configured then once you release the request in DEV then it will get
    added to queue of all three clients in QUA and can be transported using STMS_IMPORT TCode
    Thats what making me confused.
    In dev we have 3 clients. We use SCC1 to copy the configuration to client xx1 and xx2 from client xx0.
        My doubt is if we have an extended transport,request will show up in the import queue off all the development client.
        So to have the same configuration we have to use STMS_IMPORT to import the request in xx1 and xx2  or SCC1.
        If that is the case then it means there is no use of extended transport control in setup where we have multiple clients
        in DEV server and only one one in Quality server and PRD server.As we will ultimately be using STMS_IMPORT (if extended
        transport is configured) or SCC1(if extended transport is not configured) to import the request in xx1 and xx2 of DEV server.
        Same goes for multiple clients in QA or PRD, as here also we can use STMS_IMPORT (if extended transport is configured)
        or SCC1(if extended transport is not configured) to import the request  among different clients.Means I have to use one tcode,
         either STMS_IMPORT or SCC1, then how it is helpful?
    Since your target QA and PRD are having only one clients then there is no need to worry about t
               his untill you are comfortable with copying the changes in other two clients of DEV system using SCC1.
        My doubt is if extended transport control is configured can the configurational changes doen in our DEV xx0 be automatically
        gets replicated in client xx1 and xx2?
       Request you all to please help me with your valuable suggetsions.
    Regards,
    Ashutosh

  • Transport Request Not getting created automatically

    Dear Sir,
    We are facing a problem related to , Transport Request not getting created automatically during the SPRO change activities .  We have to manually create the Transport Request and then changes need to be included in the request individually on the manual basis .
    However earlier , we had no such problem and Transport Request were getting created perfactly .
    We request you to kindly help us on this issue pl .
    Rgds
    Sonia Agarwal

    Hi Sonia,
    This is purely because of the client settings. Your client settings are in such a way that the cghanges are not getting captured. As mentioned by Naveed, check to see the client settings and change the settings if needed.
    FYI: The SandBox clients will have the client settings as in ur system now.
    Regards,
    Varadharajan M

  • Deleting transport request

    Hi Folks,
    I have a problem in deleting the Transport request . it says Request/task cannot be deleted because it contains locked objects. It contains the dictionary object which has been deleted from the database.
    I am trying to create a same object again, when assign a new package it says object is locked under that request..
    Please help me to solve this problem.

    Hi,
    Your transport request may have the locked object. If you delete this directly you will have to confirm for each object. To avoid this you can goto SE03, select unlock object and then give all of your request numbers, which you want to delete, one by one. Once all of the objects are unlocked you can go back to SE09/SE10 and start from the lowest request. First delete contents of that request and then delete the request. Keep on moving up till you have deleted all the requests.
    Regards
    Rajesh Kumar

  • STMS: Transport Requests Forever Stuck to Running

    Dear SAP Friends,
    I am faced right now with a big problem with importing transport requests on our PRD instance.
    The TRs are forever stuck on running (truck icon status). I've already edited the tables TRJOB and TRBAT in SM30 but to no avail.
    I also checked the tp logs and did some isolation.
    Would there be other workarounds? I've already restarted all our instances but I still got the problem.
    Hope somebody can help me. Thank you very much in advance!
    Best Regards,
    Albert

    This is happening because import queue is inconsistant
    SAP NOTE 12746
    check TP SLOG
    TP SLOG : TP System logs
    STMS > import overview > goto > tp system log (tp slog) : u can find the location of <SID>.LOB file
    kill all the Tp process running from the os level and then
    delete QE1.LOB
    check out for *.LOB file in the DEV system as well
    in stms u can see import monitor and keep the cursor on active transport request and delete. This is under import monitor, it does same thing as ps -ef| grep tp and kill pid
    Try to do tranport from OS level using TP command
    Tp ADDTOBUFFER <TR> <SAPSID>
    tp IMPORT <TR>|ALL <SAPSID> http://options ...
    check out entries from tables TRBAT, TRJOB & TMSTLOCKR . Use SE16 to delete the entries or use sqlplus (delete * from sapr3.TRBAT and delete * from sapr3.TRBAT)
    also checkout if the TMS job is running or not  : recreate RDDIMPDP job
    Sapnotes concerning this topic or related to this topic:
    818065, 302859, 556941, 556946, 71353, 49242, 323726, 56311, 24800, 486991, 506771, 138200

  • Extended Transport Control Usage??

    Hello All,
                   "Extended Transport Control is another way to set up the Transport Route so that the route is system and CLIENT specific"..I m not able to understand this concept so unable to implement Extended Transport Control in my SAP Landscape.Please help me..Moreover I have one more doubt..
    Suppose I release a change request in DEV Client 0XX it will not only automatically be added to the Import Queue for QAS but also 0X1, 0X2, of DEV If I implement Extended Transport Control..Is there any other utility of Extended Transport Control??

    Some people complain exactly the same way about me, don't worry.
    At least you have stopped points-gaming with Joydeep Gupta for sometime already and from your own frustration are now forced into trying it yourself and putting more effort in before you launch your questions, or at the least while you wait for an answer. You seemed to have even used the search now as well.
    I think all this should be seen in a very positive light, considered as progress and is largely thanks to the efforts of Juan.
    It might take you a while, but oneday you will hopefully thank us.
    Cheers,
    Julius

  • Extended Transport Control (CTC=1) issue

    Hello,
    I have implemented extended transport control in our 3 system landscape.
    After setting CTC=1 for quality system, I manually set the Target client for all requests.
    However, now when any new request is released from Development system, I still have to manually set the target system for all requests as well.
    I don't think this should be happening. It should automatically take the client as well.
    Kindly help resolve this issue.
    Thanks.

    Check [http://help.sap.com/saphelp_nw04/helpdata/en/3d/ad5b814ebc11d182bf0000e829fbfe/content.htm]

  • Extended Transport Control

    I just implemented Extended Transport Control for my Transport Domain, which consists of DEV-100, DEV-111, QAS-200, QAS-220.
    Now, it asks me to set the 'target client' for all the transports that are already imported.Without setting the target client for the entire import queue, it wont let me import any request.
    My import queue consists of 500 odd requests that were imported prior to this, but they are still in the queue.
    I need them in the queue for mass transport later on.
    What target client should I set for them? Kindly advise.

    Hi,
    you said, you plan to do a mass import sometime. For this, i'd use the client, in which the transport are already imported as the target client.
    But remember that all newly released transports will be send to both clients in QAS!. If you import only the newly exported transports to QAS-220, the older transport which might contain needed customizing for newer transports, are missing there.
    You should think about the needs of your configuration again. And clean the buffer from time to time or schedule an periodic import-all on QAS.
    Regards,
    ulf
    P.S.:
    > So, suppose I set the target client as 200 for all of these 500 requests, would they be imported to QAS-200?
    Yes
    Edited by: Ulf Brinkmeier on Mar 3, 2009 11:48 AM

  • Set cursor position within table control while scrolling

    hi,
    Anybody can guide me how to set the cursor with in table control while scrolling down,normally it is going to first input filed.
    Thanks and Regards,
    palani.

    Hi Palani,
    Could you please share with me what all you have done regarding get and set cursor. I am facing similar problem where
    I have made a Z Table Control where i have given vertical and horizontal scrolling . Now when I scroll and try to select a row, then ZTABLE_CONTROL-CURRENT_LINE fetches line number not from the top, it fetches from the current top of ztablecontrol.
    It is onlyy changing the value on scrolling, if i do not scroll table control then value is coming correct.
    My requirement is whenever i select any row of ZTABLE CONTROL i need to get the curent line number from top. Please guide me what should i do.
    Early reply will be rewarded.
    Thanks.

Maybe you are looking for