Problem in Extending the article to different sites using listing procedure

Hi,
I am Using IS retail for a book Industry. I have created one listing procedure and Assigned the lsiting procedure in General Assortment. Also I assigned the merchandising catagories and the assortment users(sites) to the assortment.
But when I assign the above Listing procedure to the article, while creation, the article is not getting extended to the whatever sites I assinged to the assortment in the form Assortment user. The article is created for only that site for which i give at the T.code MM41.
Can somebody Pls, guide me what is the setting i missed, so that article is not getting extended to diffrennt sites.
Rgds,
Raghavendra.

Hi Raghu,
Check first that articles are getting listed and getting updated in the tables.
u can use t.code WSLB to check assortment for the user .Copy the aasortments for the site and check in table WLK1 if article exists in the assortment.
If everything is fine then check if any marc enteries are missing thru program RWDIFFERENCEMARCWLK1.
i it is missing then u can maintain the views for the article in article master.
note :
Listing of article doesnt means that article is maintained for the site.
First u have to maintain the article i.e maintain the vies in the article master and after thatlist the article.
Regards,
AM

Similar Messages

How to track the history of supplier sites used for tax reporting (1099)

Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
Ram

Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

HT201441 what if the user also forgot id apple? how to solve this problem? whether the iPhone can still be used?

what if the user also forgot ps apple? how to solve this problem? whether the iPhone can still be used?

Start here:
https://iforgot.apple.com

What is the transaction code for where used list

hi,
                what is the transaction code for where used list and
           how to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number.

hi,
there is no transaction code for where-used-list..
its one of the buttons in application tool bar which if you click will tell you where,in which program or tables etc this object is used.
to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number,
use tables <b>likp lips and mara</b> and use material number and document number in where condtion.
regards,
pankaj singh
<b>**** please mark all helpful answers</b>

Accessing the EAC in different sites

I currently have an Exchange 2010 environment with a 3 node DAG. All servers are 2008R2 and we have 2 production servers and one DR server (at a remote site).
I am working on upgrading our Exchange to 2013 and have installed 2013 SP1 on -3- 2012R2 production servers and -2- 2012R2 DR servers. The install went smoothly and I have the new 2013 DAG configured with these 5 member servers. I have configured
all of the virtual directories and everything else to get me ready for coexistence.
My question is this. No mail has been directed to the 2013 servers yet and I have just been completing the configuration. I am able to log into the EAC on the -3- production servers by browsing to https://server/ecp/?ExchClientVer=15 and logging
in with our service account that has a mailbox mounted on one of my 2010 production Exchange servers. When I go to the 2013 DR server and go to that address and try to log in with the account, I get a ":-( Something went wrong" error. I
can then mount the service account database on the 2010 DR server and it will let me log into the DR server EAC but then not the production server EAC. Is this expected behavior? Do I need to have a service account mailbox mounted on a server at
each site for administration? I'm just trying to see if I misconfigured something or if this is expected behavior. Thanks.

Hello,
Can you login by using the Exchange 2010 Server Url like
http://Exchange2010/ecp?
You may need to configure the proxy or redirection between the different sites:
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

What is the best practice to connect 2 sites and replicate ADDS between 2 different sites using windows server 2012 r2?

I found that there is new features remote access inside windows server 2012 r2 which is much more easier. Is there anybody can suggest me how to connect 2 different sites and it will be the tunnel to replicate ADDS (RW) between both sites.

See this
https://social.technet.microsoft.com/Forums/windowsserver/en-US/133e7780-6a59-4bd7-906b-70830bea48d0/sites-connections-best-practice?forum=winserverDS
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

The kerberos PAC verification failure when all users of only one RODC Site, trying to get access iis webpage of different site using Integrated Windows Authentication

The kerberos PAC verification failure when all users of only one Site which having only one RODC server(A), trying to get access iis webpage of different site which having WDC server(B) using Integrated Windows Authentication. But when they accessing the
website using IP address, it is not asking for credentials as I think it is using NTLM Authentication at that time which is less secure than Kerberos.
Note that:- All user accounts and Computers of the RODC has been allowed cache password on the RODC. Nearest WDC for the RODC (A) is the WDC (B).
The website is hosted on a windows server 2003 R2 and generating below system event log for those users of the RODC site :-
Event Type: Error
Event Source: Kerberos
Event Category: None
Event ID: 7
Date:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">date</var>
Time:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">time</var>
User: N/A
Computer:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">computer_name (the 2003 server)</var>
Description: The kerberos subsystem encountered a PAC verification failure. This indicates that the PAC from the client<var style="color:#333333;font-family:'Segoe
UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">computer_name</var> in realm <var
style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">realm_name</var> had
a PAC which failed to verify or was modified. Contact your system administrator.
This issue has been raised for last one week. Before that everything was fine. No Group Policy changed, Time also same.
In this situation do I need to do Demotion of the RODC and re-promote it as RODC again or is there any other troubleshooting to resolve it.
Thanks in Advanced
Souvik

Hi Amy,
Thanks for your response
I noticed that Logon server could become incorrect again after user re-login or restart of a workstation.
It seems root cause is different. Need a permanent solution.
The Workstations of the RODC site are getting IP from a DHCP server by automatic distribution of IP from a specific subnet for the site only. The RODC is
the Primary DNS server for the site.
I have checked the subnet and it is properly bound with only with that AD site. The group of users and workstations are in the same site AD organisational Unit.
Sometime I restarted the NET LOGON service and DNS server service on ther RODC server and sometime rebooted the server. But the Logon server issue has not fixed permanently.
The internal network bandwidth of the site is better than the bandwidth to communicate with other site.
The server is Windows server 2008 R2 standard and hosting the below roles
RODC
DNS
File server
The server performance is Healthy in core times when maximum users usually logins.
Any further support would be much appreciated Amy
Thanks
Souvik

Extend of Article with different sales organization

Hi Experts
client has 150000 Articles
and 5 sales organisation and each sales organization has 2 distribution channel
and every day 100-200 new Articles we have to create
what is the best solution to extend all the Article to all sales organization and distribution channel
please guide
thanks in advance

Hi,
Go to Common Distribution Channel and Mention distribution channel.
For Example
Distrib.channel Ref.distrib.channel
01 01
02 01
03 01
04 04
In this example, only distribution channels 01 and 04 have customer and material master data defined. Distribution channels 01, 02, and 03 share the master data that you defined for distribution channel 01. Distribution channel 04 has its own master data. When you create a sales order in distribution channel 03, the system checks the customer and material master data against the data defined for distribution channel 01.
Regards
Vijai jain

I keep getting problem loading page. I try different sites and Firefox will not load. I've uninstalled and reinstalled but it doesn't help.

I also can use internet explorer just fine so I know it's not a problem with my internet provider.
Unable to connect is the message I get. Then...
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
I'm not sure what the problem is. I've used Firefox for years and love it. I really don't like internet explorer. Please help.

Deggie, I was referring to my iPad & was quite frustrated & tired when I wrote my question. New day, new insight & problem is now solved. Thanks for your willingness to help!

I get an Invalid URL all the time for different sites. Why is this happening and how can I stop it?

No matter the site, it comes out of no where. I clear cache from browser, flush the DNS, change browsers, but nothing works. It eventually corrects itself after 10 minutes but puts a damper on the work day as I have to stop work all the time.

Hey Klaus,
That only showed the end of the URL. In the browser, the actual URL was appfirst.com/blog/wp-admin/post.php.

Problem in extending the strcture RFPOSXEXT

Hi,
I have added a new field BRSCH(which is a standard field from LFA1) to strcture RFPOS(RFPOSX).
Then i have ran the report RFPOSXEXTEND and got the message 'Program ran successfully....'.
But the new field BRSCH is not added to structure RFPOSXEXT.
Please help me.Whether i am missing any steps?
Thanks & Regards
Seshagiri

Hi,
I have resolved the issue on my own.
Earlier the field BRSCH was appended in RFPOS structure only.Now i have appended the same field in RFPOSX and then ran the program RFPOSXEXTEND,which added the new field BRSCH to generated strcture RFPOSXEXT successfully.

I have been getting a popup every time I open safari. It will not allow me to use safari. It gives me a phone number to call to fix the problem. In the meantime I can't use safari.

I Have been getting a pop up when I open safari telling me there is a threat of a hacking attack
on my browser. It asks me to go to a website http//pctechief.com for a fix. I am afraid to reply to
this website.

There are several ways to recover.
1. Some of those scam pages can be dismissed very easily. Press the key combination command-W to close the tab or window. A huge box will pop up. Press the return key and both the box and the page will close. If that doesn't happen, continue.
2. Press and hold command-W. You may hear repeating alert sounds. While holding the keys, click the OK button in the popup. A different popup may appear, which you can cancel out of as usual.
3. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and uncheck the box marked Enable JavaScript. Leave the preferences dialog open.
Close the malicious window or tab.
Re-enable JavaScript and close the preferences dialog.
4. If the Preferences menu item is grayed out, quit Safari. Force quit if necessary. Relaunch it by holding down the shift key and clicking its icon in the Dock. None of the windows and tabs will reopen.
After closing the malicious page, from the menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

Problem with viewing the next page on "My Wish List"

Hello: "My Wish List" page in the iTunes store won't let me see page 2 (or higher). Even when I click on the obvious icon labelled "2" or "next" (as in "next page"), the page stubbornly remains on page 1. This seems ridiculous, but I'm wondering if anyone else is having this gnat of a problem? Any suggested solutions welcomed -- thanks in advance. Oh yes, I'm using iTunes 10.4.1.

While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat. You want to make sure this icon is white (meaning it is set to Off). If it isn't tap it either one or two times to change its current setting.
Any luck there?
B-rock

I have an iPad 2 and I cannot remember the password for my icloud account. The problem is that the id and password I used I no longer have and since I cannot remember the password I am stuck trying to use many functions on my IPad HELP PLEASE!!!

I have changed isp and no longer remember the password for this account everything I try to do I need this password is there a way to fix this?

Go to http://appleid.apple.com and click 'Find your Apple ID'.

Problem to get the availability of a product using BAPI_SALESORDER_SIMULATE

Hi folks,
I am trying to use BAPI_SALESORDER_SIMULATE to get the availability of a product but the BAPI does not send me the expected result :
I am trying to get the availability of a "to be discontinued" product. The available quantity of this product is 592 unit.
1/ Here is what I have in VA01 when I order a quantity of 1000 unit : [VA01|http://img689.imageshack.us/img689/4982/va012.jpg]
--> only 592 units available : OK !
2/ Here is what I have with BAPI_MATERIAL_AVAILABILITY when I order a quantity of 1000 unit : [Table WMDVEX|http://img707.imageshack.us/img707/9793/wmdvex2.jpg]
--> only 592 units available : OK !
3/ Here is what I have with BAPI_SALESORDER_SIMULATE when I order a quantity of 1000 unit : [TableORDER_SCHEDULE_EX|http://img101.imageshack.us/img101/830/orderscheduleex2.jpg]
--> Nothing available : not OK !
For information to run BAPI_SALESORDER_SIMULATE I am filling ORDER_HEADER_IN, ORDER_PARTNERS and ORDER_ITEMS_IN.
Thanks in advance for your help.

@Brad : If I fill ORDER_SCHEDULE_IN-REQ_QTY in place of ORDER_ITEMS_IN-REQ_QTY I receive an error : E-06070-Enter a quantity (I suppose ORDER_ITEMS_IN-REQ_QTY is mandatory). Which field do you use to specify the schedule quantity ?
For information here are the information I am using to run BAPI_SALESORDER_SIMULATE :
ORDER_HEADER_IN
DOC_TYPE
SALES_ORG
DISTR_CHAN
DIVISION
REQ_DATE_H
PO_METHOD
ORDER_ITEMS_IN
ITM_NUMBER
MATERIAL
REQ_QTY
SALES_UNIT
ORDER_PARTNERS
PARTN_ROLE
PARTN_NUMB

Problem in Extending the article to different sites using listing procedure

Similar Messages

Maybe you are looking for