Problem in Extracting Data for one cube to another

Hi,
This problem exists in Quality Environment of 3.x version.We have two financial cube.
Cube A1 - Sourced through R/3 system (delta update) and Cube B1- Sourced through A1 cube.(Full update). These two cubes are connected through update rules with one to one mapping without any routines.
Basis did a copy of back-end R/3 system from Production to Quality server.This happened approximately 2 months back.
The Cube A1 which extracts delta load from R/3 is loading fine. but for the second cube, (fextraction from previous cube A1) i am not getting full volume of data instead i m getting meagre value but the loading shows successful status in the monitor.
I tried through giving conditions in my infopackage (as it was given in previous year's loading) but then also its fetching the same meagre volume of data.
Any lights on this will be more appreciable...
Swami

Hi Swami
As you said below issues is in QA system, please check with below and revert back to me if this doesnt solve your problem
Please check update rules of InfoCube B1 for all key figures and characteristics, you may find certain objects with "NO UPDATE", (this happens sometimes while copying production system to any other system), if you find any object with"NO UPDATE" then compare this object mapping with Production system update rules, if its not sync then change update mode accordingly
Please check number of characteristics and key figures existing at InfoCube B1(production) and compare with InfoCube B1 (QA), if this doesn't match then check for missing object and add to InfoCube B1
Hope this will solve your issues!
-DU

Similar Messages

ABAP Function Module Example to move data from one Cube into Another

Hi experts,
Can any please help out in this ..?
A Simple ABAP Function Module Example to move data from one Cube into Another Cube
(How do i send the data from one client to another client using Function moduel).
Thanks
-Upen.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again, BI related? ("cube"), also search for information before asking.
Edited by: Thomas Zloch on Oct 29, 2010 1:19 PM

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

Move data from one cube to another cube

Hi,
I am on BW 3.5 and I have moved the data from one cube to another cube and found that the number of records in the original cube does not match to the newly created cube. for eg. if the original cube contains 8,549 records then the back up cube contains 7,379 records.
Please help me on what I need to look on and if in case the records are getting aggregated then how do I check the aggregating record.
Regards,
Tyson

Dear tyson m ,
check with any update rules in ur transfer.If so check in it.
Just go through these methods for making transfer from one cube to another cube fully without missing data.
Update rules method
if it's updated from ods, you can create update rules for cube2 and update from ods
or you can try datamart scenario
cube1 right click 'generate export datasource'
create update rules for cube2, assign with cube1
rsa1->source system->bw myself, right click 'replicate datasource'
rsa1-> infosource -> search 8cube1 name
(if not get, try right click root note 'infosource'->insert lost node(s)
from that infosource, you will find assigned with datasource, right click and 'create infopackage', schedule and run.
Copy from
While creating the new cube give the cube name in the "Copy from" section. It would copy all the characteristics and Key figures. It would even copy the dimensions and Navigational attributes
Another option is:
The steps for copying the contents of one cube to another:
1. Go to Manage -> Recontruct of the new cube.
2. Select the "selection button"(red , yellow, blue diamond button).
3.In the selection screen you can give the technical name of the old cube, requests ids you want to load, from & to date.
4.Execute and the new cube would be loaded.
Its all that easy!!!!!!
Refer this link:
Copying the structure of an Infocube
Reward if helpful,
Regards
Bala

Aggregation of data from one cube to another

Hello,
   I would like to copy the data of one cube to another cube, at an aggregated level like we do in BW.
   For instance, cube A has cost center, while cube B has to be the totals of all the cost centers from cube A. And hence, cube B will not have a field cost center at all.
   Could someone help me on this topic please.
Thanks and Best Regards,
Rajkumar A

Hi dear,
it's enough to do not put in your copy cube the cost center (the OLAP processor when you execute a query will do the rest)!
Otherwise, if you want to have all the records PHYSICALLY AGGREGATED, you have to go with an ODS as destination (and here you can aggregate as you prefer on the basis of your key part !)...
Or you can aggregate all the records in a single data package with a SUM operation into an internal table in your start routine (without the cost center, clearly !)...
Hope it helps!
Bye,
ROberto

Partitioning two Years Of Data From One Cube Yo Another

Hi Experts,
Can any one please help me on the following issue.
I got the requirement where I need to copy the data from one cube to another having unequal number of dimensions.
I have achieved this using Transparent partitioning, But I could be able to copy only one year data.
In cube1 I have the months like Jan, Feb...Dec and in cube2 I have the structure like Jan-11..Dec-11, Jan-12...Dec-12.
While creating the partition how can I map the Jan with Jan-11 and Jan-12.
Thanks In Advance,
Ram

You can map manually. it is possible.

Loading Data from one Cube into another Cube

Hi Guys,
I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
Thanks in advance

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

How to copy documents for InfoProvider data from one cube to another cube

Hello Everyone,
We are using standard document feature to store document/comment about the data shown in the report/planning query. Relevant characteristics have the property 'characteristics is document attrib' turned on/selected for this purpose.
Looks like the documents created gets tagged to a particular InfoProvider along with characteristic value assignment.
Is there a way to move or copy documents from one InfoProvider to another InfoProvider.
As per the design requirement, we need to move data from a real time InfoProvider (transaction cube) to a basic reporting cube. The data in the first/source cube stays for a period of approx 3 months before moved to other cube. We want the documents associated with InfoProvider data also to be moved, so that users can continue to see the document/comments what they had created earlier.
I looked at the Documents tab in DataWarehouse workbench. No options seem to be available to copy or move documents.
Any help will be highly appreciated and points will be rewarded accordingly!
Best regards,
Sanjeeb

Hi
Have you got any answer to this? I would also be interested in a copy function but more from one query ID to another.
Kind regards,
Daniel Müller

Can we pull data from one cube to another cube

Hi All,
I need to pull the data for a 4 fields from an existing info cube to another cube. Can any one let me know the procedure of how to do this.
Thanks in Advacne

scenario cube1 --> cube2
1) load data into cube1
2) cube1 > export datasource > it creates the ds with 8cube1
3) rsa1 > source systems > myself sourcesystem > replicate datasources
4) cube2 > rt clk > create update rules
5) map the update rules for the 4 fields and activate
6) rsa1 > infosources > search for 8cube1 > create infopackage and load data.
Regards,
BWer
Assign points if helpful.

Copy of essbase data from one cube to another

Hi,
I was faced with a situation wherein I needed to retrieve the data calculated in one essbase cube onto another essbase cube.
The catch remains that the outline would be slightly different in both cases.
Also is it possible for me to retrieve only the required output (through some kind of export data) and then re-import the data into the required essbase cube.
Kindly help me in the same.
Thanks
-Jishnu

Hi Jishnu,
You can use both calculation & report script to export subset of cube (In your case, export member those match in both source & target cube) in following ways: -
In Calculation Scripts: 1- Use DataExportOptions to define format for export.
2- Use DataExportCond to define export condition if you want to apply any kind of restriction of exported data.
3- Use Fix....End Fix command to define subset of cube
4- Use DataExport command to export data that define above.
In Report Script: - 1- Use format commands to define exported data.
2- Use Row/Member selection commands to define subset of cube.
For more details about calculation & report script, please visit following link: - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/techref.htm
Hope it will help you.
Atul K,
Edited by: Atul Kushwaha on Oct 26, 2009 9:59 PM

Hi! How do I switch existing automation data for one parameter to another?

Hello! I am new to Logic 8, and actually to using the Logic automation feature. Here is the deal: I have some old-school Logic event data that I recorded as a kind of automation (before the current kind of dedicated automation) for an EXS24 parameter. I need to change this event 'automation' to actual Logic automation, as Logic 8 does not read it (as Logic 7 did before it). So, I highlighted all of the events in my old-school 'automation' region in the event list. I had to change the number value to a common number assignment so that I could Change Selected Event Data into Track Automation. I selected volume (number seven, I believe), and than highlighted all events, clicked on the event region, than went to options and selected my desired automation transformation destination (say that three times fast). Great! I have my region as automation! Logic 8 knows what to do with this! But, it is volume. I need it to control the LFO 2 Rate of the EXS24. Problem is, that when I switch the automation parameter from Volume to LFO 2 Rate, the automation disappears. It seems as though that automation data is only for Volume. So, how might a charming gentleman, such as myself, go about keeping/converting the same automation, but for the parameter I want to change it to?
Thanks! =)

Hold "command" when switching between automation parameters.
Then you will get a dialog offering you the option to convert the existing parameter's data into the destination parameter, or "copy and convert" (which does the same but leaves the existing volume automation data intact.)

Dtp error when loading data from one cube to another cube?

hi,experts
it seems strange that when I tick the some characteristics as navigational attributes in the cube , the error occurs during the execution of the DTP:error while updating to target Z* (Cube name ).
once i turn the flag off , no error appear. could anyone give me a clue ?
thanks in advance!

Hi,
When u make changes in the cube u need to make necessary changes in Transformation and activate the DTP.The checking of Navigational attributes in cube will appear in u r transformation as new fields where u need to create a mapping for them and then activate, also activate your DTP and then load the data. This should resolve your issue.
Regards

Error when trying to load data from one cube to another

Hi Friends
I am getting an error when using extractor checker for datamart data source. The cube in question is compressed. this is what i get when i view the logs.
SQL Error: 575-
SQL0575N View or materialized query table "SAPBWP./BIC/VZTCOOMC02F" cannot be used because.
Please help
Thanking you in anticipation
Samuel

Rememberme -
No, the SAP_FACTVIEWS_RECREATE program cannot and will not uncompress the data. A fact view exists for every infocube which combines the E and F fact tables. You can see this view using SE11 -> View -> /bic/vxxxxf (where xxxxx is your infocube tech name). When you run this program this view is dropped and recreated thus eliminating any incosistencies that lead to the error posted in this thread.
Hope this helps!

Less number of Records while loading data from one cube to another

Hi,
We are in the process of doing major changes in the existing InfoCube.
Before making any changes, we had planned to make a copy of the cube with data.
For this we did the following steps :
1. Created the new cube from the original cube.
2. Generated Datasource on the Orignal cube.
3. Made a update rule on the new cube by selecting the Orinal cube.
4. Made a InfoPack on Infosouce which got created with 8<original cube>.
5. Uploaded the data into the new cube.
We have uploaded the data successfully from the original cube to the new cube.
However, New cube shows less number of records as compared to the original cube.
But the query is showing the same figures from both the cubes.
Can anyone please advise what could be the reason for this less number of records and how the figures are showing same when we run the query from both the cubes.
Please help.
Thanks
Ramesh Ganji

Hi Ramesh,
this is possible coz when u have loaded yr original cube, it may be loaded on daily/weekly basis. so in the cube there are many requests. Also if in the same request, if there are two records with same dimension keys ther are automatically added aggregating them.
if req 1 has following records
cust mat amt
1      1     100
1      1       50
it will add
1      1     150
and if the records are seperated by different req, then both will b added individually.
therefore when u r loading yr new cube from original cube, all records that has same dimension key gets aggregated coz they are loaded into single request. so it showing less no of records as added.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

Problem in loading data from one DSO to another

Hi All,
I am using Multicube 0PM_MP03, this mutli cube use DSO 0PM_DS02 & 0PM_DS01, data will flow from PSA to 0PM_DS01 & then to 0PM_DS02 using a Update rule, i have triggered my infopackage & i can see data in 0PM_DS01 & i have activated the data in 0PM_DS01, now on right click on 0PM_DS01 i click on the option Additional Functions -> Update 3.x Data to Target, now the request status is green in 0PM_DS02 but i cannot see any data in this DSO, neither in new or active, can anyone help me out in this where i am doing wrong.
Thanks,
Pritam.

Hi Pritam,
This is strange, Check the below points.
1. If the number of records added 0, in manage of DSO2?
2. Confirm if there is a transfprmation between ODS1 & ODS2. If there is, you need to use a DTP (not Additional Functions -> Update 3.x Data to Target).
3. Activate the request and then check.
4. Maintain PSA for the datasource 80PM_DS01 and when loading data from DSO1 to DSO2 choose option PSA and then into targets.
Regards,
Panksj.

Loading data from one cube to another cube.

Hi,
Trying to copy the data from cube A to cube B...however after creating export data source(8A) on cube A, unable to find the infosource 8A.
Do someone have any idea..... or I'm missing some steps?
Help is highly appreciable.
Regards,
Jim

Hi Amit,
goto transaction sbiw in your BW system. Open 'Business Content DataSources' and select 'activate application component hierarchy'. After that you can additionally choose 'activate business content datasources'. Then goto rsa1->source systems. Right click on your source system (BW itself) and replicate the datasources. After that you should be able to see the application component DM in rsa1->infoSources. In application DM you should see all 8... infoSources and dataSources. If not, you should choose 'Settings->Display generated objects' from the top menu as already suggested.
regards
Siggi

Problem in Extracting Data for one cube to another

Similar Messages

Maybe you are looking for