Problem in extracting data from another BW server

Hello Experts
I have two BW servers in landscape. One is used as stagins server and second server exctracts data form this server and is used as reporting server.
I can see data in DSOs in stagins server, also checked export datasources in RSA3 in staging server and works fine.
In reporting server delta infopackage runs fine but extracts 0 records. i tryied deleting and redoing init still dosent help. its not throwing any error.
what could be problem and how can i troubleshoot and correct it?
Thanks in advance
Regards
Sudeep

Try these Steps:
1.Replicate and activate the datasource(if BI 7) else activate Transfer Rules.
2.Create an infopackage without selections as Full update and run..
3.If no records are still coming (0) then check the RFC connection b/n Staging & Reporting BI.
Go to SM59 ,first in Reporting BI and chk the :authorizaiton test & rfc test
again go to Staging BI and test for RFC connection to Reporting BI -->authorization test & rfc test
Sometimes password etc are changed just be careful and chk them properly.
4.create a Dummy DSO and load data to it from flat file on staging server.Now replicate its export datasource to Reporting BI.
If you can load data to PSA of this dummy datasource then there is some other problem.If there is no record comign then definately you need to go through step-1 to 3.
Regards,
RK

Similar Messages

Problem when extracting data from R/3 to BI

Hi Experts,
I am facing a strange problem. While i am extracting data from R/3 yo BI. One Infopackage is running successfully and i can see the data at Bi side. But while I am running another infopackage for another data source it is taking long time and at last loading results into failure.
I have gone through SDN also but not able to find any inputs.
I think it might be the reason with the Idocs. The error it is giving is
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I am not able to see list of Idocs in sm58.
What might be the reoson?
Regards,
sridhar

Hi,
See if its a full schedule it again by deleting any old requests....
And then when going thru job overview>in the sourcesystem>u can execute there itself and chk the status of the job...
If its no there then the job might have missed up due to some unfair reason....it happens sometimes also..some times it will be in scheduled only....once select all active/cancled/finished and so on...
And also chk under details tab...under extraction....whether data selection scheduled and requested and finished....????
If not there try to run it again and at the same moment monitor in source with jobname as BIREQU_* and select all input entries as canceled/active/finished......
rgds,

Extracting data from a SQL Server to BW

Hi Experts,
    Can somebody let me know how to extract data from a NON SAP
    SQL Server I mean
    1. Creating a Source System
    2. Connecting to the SQL server
    3. Creating datasources and extraction
    Kindly help me its urgent
    thank you
    arshad.

Hi Ingo,
What I suggest is instead of extracting it to a file, can you use the function module which replicates this data to the mobile clients and use this function module to call the select statement. If a mobile client is able to access this info, then it must be doing a RFC call to some system whose logical system would have been in SAP as well. This is an assumption.
May be if you could call the same function to derive the required data instead of extracting it to a file and then uploading it.
Regards,
Srikanth

Problem with extract data from R/3 to BW

I want extract data from R/3 system.the problem is when I run the infopackage,I can see the status is yellow In the Monitor and the data can't extract to BW.but in the source system,the job of extracting data has been finished.
(use the Tcode: WE02)the Outbound IDocs and Inbound IDocs are OK，but in the BW system ,I canu2019t see the Inbound IDocs.
In the source system use Tcode: SM50,I can see the process SAPLQOWK is running for a long time and run out system memory.
use Tcode : SM58, I execute LUW, the data can transfer to BW system,but the report SAPLQOWK is not stop.
it would be stopped by canceling the process manually in operating system or it run out time.
why can't i extract data from R/3 system successfully ?
why the process SAPLQOWK can't finish?
how can i do?

Hi,
I hope the note 527481 would help you to sort out this problem.
Regards,
Anil Kumar Sharma .P

Problems to extract data from 0HR_PY_1

Hi Experts,
I'm using BW v.7 to extract data from standard data source 0HR_PY_1 of SAP-ECC, with delta update.
When I try to extract the data job finishes with error (red status) and all data-packages have error message ABORT in customer routine 9998.
Although I'm using BW v.7 I have activated 3.x extraction (DataSouce -> InfoSource -> Update Rule).
Any help will be welcome!
Alex

I've found the problem by myself

Problems in extracting data from r/3

Hi Guys
I am extracting data from r/3(QA) to BW(QA), into an ODS. Now, my previous load failed but i saw from RSMO that the load had more than 4 million records. I am scheduled the load again. And in monitor(RSMO) it says:
(yellow symbol) 17:24:50 ( 762040 From 0 Records )
and in status, it says everything ok, no error, process is still goin on. And in details this is the last line at the moment:
"Transfer (IDocs and TRFC): Missing messages or warnings"
Data Package 29 : arrived in BW ; Processing : Selected number does not agree with transferred n
"Processing (data packet): Warning received"
Data Package 29 ( 23810 Records ) : Everything OK.
I am assuming that there are 100 packages like this in total. Will my data load into the ODS finally??
Thanks.

Hi Chintai,
If you are extracting delta records, then you can view the number of records in RSA7.
I suggest you go to details tab of the monitor, you would be knowing the activites that are taking place..
Check if your transfer rules, update rules are done for atleast for few of the data packages.
Regards
Manga(Assign points)

I have a problem to extract data from oracle dump file (.dmp) using oracle database or any other tools.

There is IMP utility which provides me data as graphical way. But i need extract data in such a way so that i could able to use in my application.
thanks,
mohan

Hi,
EdStevens
Actually I was using SQL Developer. Sorry for the wrong define question. Now the real problem is:
I want to read or extract data in a txt file from Oracle Dump (.dmp) file without using Oracle sqlPlus or Oracle Database.
No need to say that i am able to extract dump data using sqlPlus. But for that, there is a little burden to install oracle database
or sql Developer.
I also listen about Oracle Loader a little bit. Is it a tool for providing extraction of data from Oracle dump file.
Thanks for your previous reply,
And now waiting for your suggestion.
thanks,
mohan

Problem in extracting data from source system

HI
I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?

Vara Prasad,
I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number...

Problem in extracting data from Z totals table (special Ledger)

Hi Gurus,
I am in a task of pulling in specific fields from the Z Totals Table of Special Purpose Ledger into the cube. We only need totals records and do not need line items.
In SBIW, i have generated the transfer structure and datasource for totals table as per the steps of Generic extraction.
The problem is that am not able to see all the fields (like balance carried forward, total transactions) in the selection fields screen. While extracting i choose totals records only. But now my datasource got generated and am able to see that it is active (green). But some important fields like balance are missing.
Please let me know your suggestions / ideas.
Thanks
Shreya

We have the exact same Challenge and Issue. When I view my generated extract structure 3FI_SL_ZB_TT, I don't see any of my key figures. This was created off the Special Ledger Summary or totals table.
For Instance, I need fields KSLVT through KSL16. That is, Balance Carried forward in Group currency (period 0) and, total of transactions of the period in group currency, (periods 1-16). I don't see these at all in the generated extract structure. Does that mean it must be appended in via transaction RSA6?
Also, to get the Balance Carried forward do I have to add 0BALANCE to the extract structure?
Finally, besides the beginning balance, which wiil remain constant, can I get Month-end Year To Date Balances using this approach. Note, I don't need detail from the line items table. I just want to make sure I don't need to use that in concert with a Delta and ODS to get my Month End YTD Balance. I only need this cube for Balances.
Thanx,
Joe M

SSIS 2014 - Best way to use parameters to extract data from sources

Hi,
Is there any way besides SQL COMMAND FROM VARIABLE that I could use to extract data from Oracle \ SQL Server tables that filters the amount of data?
For instance, I want to extract in all sources data beyond 2007 so I wanted to use this year as a parameter in all OLEDB sources I will be using.
Thank you

Hi Pedro,
Based on my research, the Microsoft OLE DB provider for Oracle and Oracle Provider for OLEDB does not allow parameterized queries in OLE DB Source. So the best method to achieve your requirement is still using SQL COMMAND FROM VARIABLE option as Data access
mode.
Considering construct your query in a variable which you can include your parameter dynamically with another variable and set the variable properties "EvaluateAsExpression" to true. In the Expression Property set the value to:
"select * from test
where Col1='" + (DT_WSTR,100) @[User::para] +"'"
The following two similar threads are for your references:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/97f23ef5-35ac-466e-87d9-69edac2525f9/ssis-oledb-source-problem
https://social.msdn.microsoft.com/forums/sqlserver/en-US/32a70752-adab-4180-8b6d-f6100b3e356c/pass-variable-for-ole-db-source-with-connection-to-oracle
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to extract data from a remote system

Hi,
I want to extract data from another system and map it with a target table in my local machine. what is the procedure to do that?
I tried to create another module specifying location of that remote system I could extract the table but when I am mapping with the target table I am getting this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_LOCATION_UBN_15
ORA-00604: error occurred at recursive SQL level 1
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from UBNDW@ORACLE_LOCATION_UBN_15
here ORACLE_LOCATION_UBN_15 is the location and UBNDW is the SID for that system
SCOTT is the username I have provided while creating the module
Please help me out with this..
Thanks

Hi Roberto,
thank you for the fast answer. I have read this before but i don't understand the needed steps on the Oracle-System.
Hope anyone can help me...
Thanks
Muammer
Message was edited by:
Muammer Kizilaslan

Error while extracting data from a remote system

Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
Thanks

Hi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya

Extract data from R/3 using RFC

Hi!
Can any one tell me can I extract data from R/3 to BW usinf an RFC. My project has an implementation of RFC to bring the data from R/3 to BW and execute some functions on it.
Please let me know what are the steps to create RFC to extract data from R/3 (If possible)!
Regards,
Sri Harsha

Hi,
Check the below threads.
Unable to fetch data from R/3
Problem in extracting data from R/3 to BI 7.0
Extraction from R3 table to BW
RFC to file scenario
Regards,
Maha

Extract data from XY graph

hi
here i want to extract data from the XY graph . I attached vi which i use for 1D array . how i can use this VI for 2D Array.
Thanks
Solved!
Go to Solution.
Attachments:
select data.vi ‏28 KB

Hi
I am facing problem to extract data from XY graph . I need to extract data between two cursors in a graph into an array. I was trying out the method mentioned over here but I couldnt get exact values between cursors.
Thanks
Attachments:
extractdata xygraph.png ‏103 KB

How to extract data from CLOB Datatype having XML values

Hi,
I am facing problem in extracting data from a TAble FCT_A where OBJECT_CONTENT field(Datatype CLOB) is having data of XML type.
Below are the value:
<ras-cube>
<jndiDataSourceName>datasource_etl</jndiDataSourceName>
<dimensions class="vector">
<string>CUG_IND</string>
<string>EVENT_DATE</string>
<string>EVENT_DIRECTION_KEY</string>
<string>EVENT_TIME_SLOT_KEY</string>
<string>EVENT_TYPE_KEY</string>
<string>FAF_IND</string>
<string>FILTERED_OUT_FLAG</string>
<string>IN_TG_ID_KEY</string>
<string>LONG_EVENT_IND</string>
<string>NE_ID_KEY</string>
<string>NODE_ADDRESS</string>
<string>OTHER_MSISDN_DIAL_DIGIT_KEY</string>
<string>OUT_TG_ID_KEY</string>
<string>RATING_DELAY_IND</string>
<string>RI_MISMATCH_IND</string>
<string>SERVED_MSISDN_DIAL_DIGIT_KEY</string>
<string>SERVED_MSRN_DIAL_DIGIT_KEY</string>
<string>SRV_TYPE_KEY</string>
<string>SUBS_BU_KEY</string>
<string>SYS_ID_KEY</string>
<string>TERMINATION_REASON_KEY</string>
<string>THIRD_PARTY_DIAL_DIGIT_KEY</string>
<string>ZERO_FLAG_KEY</string>
</dimensions>
<measures class="vector">
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>CHARGE</targetName>
<expression>SUM(FCT_RATED.CHARGE)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>COMPUTED_VOLUME</targetName>
<expression>SUM(FCT_RATED.COMPUTED_VOLUME)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>DOWNLINK_VOLUME</targetName>
<expression>SUM(FCT_RATED.DOWNLINK_VOLUME)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>ORIGINAL_DUR</targetName>
<expression>SUM(FCT_RATED.ORIGINAL_DUR)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>RA_CHARGE</targetName>
<expression>SUM(FCT_RATED.RA_CHARGE)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>RECORD_COUNT</targetName>
<expression>COUNT(FCT_RATED.*)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>UPLINK_VOLUME</targetName>
<expression>SUM(FCT_RATED.UPLINK_VOLUME)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
</measures>
<dimensionMap class="linked-hash-map">
<entry>
<string>FCT_RATED</string>
<null/>
</entry>
</dimensionMap>
<cubeStorageConfig>
<partitionColumn>EVENT_DATE</partitionColumn>
<tableSpaceName>ORV5_ETL_DFLT</tableSpaceName>
<isLogging>false</isLogging>
<isCompressed>false</isCompressed>
<noOfHashPartition>10</noOfHashPartition>
<partitionScheme>1</partitionScheme>
</cubeStorageConfig>
<cubeType>1</cubeType>
<name>MX_RATED</name>
<label></label>
<parentNames>
<string>FCT_RATED</string>
</parentNames>
<otherProperties class="linked-hash-map"/>
</ras-cube>
I want to extract expression tag in the above XML types
Kindly any help will be needful for me
Thanks and Regards

9i
with FCT_A as (
select xmltype('
<ras-cube>
<jndiDataSourceName>datasource_etl</jndiDataSourceName>
<dimensions class="vector">
<string>CUG_IND</string>
<string>EVENT_DATE</string>
<string>EVENT_DIRECTION_KEY</string>
<string>EVENT_TIME_SLOT_KEY</string>
<string>EVENT_TYPE_KEY</string>
<string>FAF_IND</string>
<string>FILTERED_OUT_FLAG</string>
<string>IN_TG_ID_KEY</string>
<string>LONG_EVENT_IND</string>
<string>NE_ID_KEY</string>
<string>NODE_ADDRESS</string>
<string>OTHER_MSISDN_DIAL_DIGIT_KEY</string>
<string>OUT_TG_ID_KEY</string>
<string>RATING_DELAY_IND</string>
<string>RI_MISMATCH_IND</string>
<string>SERVED_MSISDN_DIAL_DIGIT_KEY</string>
<string>SERVED_MSRN_DIAL_DIGIT_KEY</string>
<string>SRV_TYPE_KEY</string>
<string>SUBS_BU_KEY</string>
<string>SYS_ID_KEY</string>
<string>TERMINATION_REASON_KEY</string>
<string>THIRD_PARTY_DIAL_DIGIT_KEY</string>
<string>ZERO_FLAG_KEY</string>
</dimensions>
<measures class="vector">
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>CHARGE</targetName>
<expression>SUM(FCT_RATED.CHARGE)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>COMPUTED_VOLUME</targetName>
<expression>SUM(FCT_RATED.COMPUTED_VOLUME)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>DOWNLINK_VOLUME</targetName>
<expression>SUM(FCT_RATED.DOWNLINK_VOLUME)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>ORIGINAL_DUR</targetName>
<expression>SUM(FCT_RATED.ORIGINAL_DUR)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>RA_CHARGE</targetName>
<expression>SUM(FCT_RATED.RA_CHARGE)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>RECORD_COUNT</targetName>
<expression>COUNT(FCT_RATED.*)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<com.connectiva.onereview.rasobjects.cube.CubeMeasure>
<targetName>UPLINK_VOLUME</targetName>
<expression>SUM(FCT_RATED.UPLINK_VOLUME)</expression>
<persist>true</persist>
</com.connectiva.onereview.rasobjects.cube.CubeMeasure>
</measures>
<dimensionMap class="linked-hash-map">
<entry>
<string>FCT_RATED</string>
<null/>
</entry>
</dimensionMap>
<cubeStorageConfig>
<partitionColumn>EVENT_DATE</partitionColumn>
<tableSpaceName>ORV5_ETL_DFLT</tableSpaceName>
<isLogging>false</isLogging>
<isCompressed>false</isCompressed>
<noOfHashPartition>10</noOfHashPartition>
<partitionScheme>1</partitionScheme>
</cubeStorageConfig>
<cubeType>1</cubeType>
<name>MX_RATED</name>
<label></label>
<parentNames>
<string>FCT_RATED</string>
</parentNames>
<otherProperties class="linked-hash-map"/>
</ras-cube>') OBJECT_CONTENT from dual
SELECT   EXTRACTVALUE(value(d), '//expression/text()', '') exp
FROM     fct_a t,
         TABLE(XMLSEQUENCE(EXTRACT (
                             t.object_content,
                             '//ras-cube/measures/com.connectiva.onereview.rasobjects.cube.CubeMeasure/expression'
                           ))) dEdited by: Beijing on Aug 10, 2009 9:21 AM

Problem in extracting data from another BW server

Similar Messages

Maybe you are looking for