Problem in extracting data from source system

HI
I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?

Vara Prasad,
I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number...

Similar Messages

Error in Process Chain while extracting data from source system

Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.

Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Steps to Extract data from Source System

Hi,
I want to use business content object 0PA_C01. I have implemented it in the SAP BW system wanted to know how t=do I extract the data from R/3 system now to the cube. I am new to extraction so kindly help me out in this.
Thanks.

Hi SAPBILearner,
Genric Extraction Steps:
1) In R/3 side Create a Data source by use of RSO2 tcode
Select datasource type here, Give datasource name click create button
2) Specify description
Specify your table name
Choose the Application Component(like SD, MM, PP)
Click SAVE it takes to next screen
3) Choose the fields for visible and hidden
SAVE it.
Your datasource has been created
4) In RSA3 (Extract Checker) you can check your datasource it contains data or not
IN BW SIDE
1) First Replicate your datasource
2) Create InfoArea--> Info objects and all
3) Create InfoSource and assign this R/3 Datasource
4) Create info package to load data.
LO EXTRACTION STEPS
===================
1) In R/3 side, First delete the setup table (LBWG)
2) RSA5 --> transfer datasource
3) RSA6 --> Verify transferred datasource available or not
4) LBWE --> Maintain datasource
5) OLI*BW --> Fill setup table
6) RSA3 --> Extract checker
In BW side
1) Replicate datasorce
2) Asssign Infosource , activate datasource
3) Create infopackage to load data
Thanks
Mrityunjay

Error during extraction data from APO system

HI Gurus,
We are extracting data from APO system at regular intervals. As poart of business requirement, we enhanced the data existing data source in APO dev system and replicated the same in BW dev system and activated the Tx structure and Tx rules.
When we checked it is working fine in dev environment.
Now we moved the same in Quality system, and we tried to extract data, it throws error " error in data selection in source system".
We tried to check in RSA3 in APO and found that the extract program still refers to the old extract structre and gives dump " Extract structure unknown".
Could anybody throw some light on this issue.
Tnx in advance.
Guru

Hi,
Have u collected all the objects in R3,like the Table/View , DS,Extract Structure.
And
Has replication been done in BI side for the same.
Rgds
SVU
Edited by: svu123 on Sep 24, 2009 7:50 AM

BO DI for extracting data from legacy system to SAP BW 7.0

Hi,
Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
Please share your experience on such a landscpae or related documents any of you had come across.
Regards,
Pritesh

There are couple of them - Lawson ERP, Kalido, AS/400. ECC 5.0 might be there as well.
Regards,
Pritesh.
Edited by: pritesh prakash on Jun 14, 2010 2:00 PM

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

How to extract data from legacy system to source file

Hi can anyone tell me the procedute to copy data from legacy system to source files....this data needs to be moved to base tables
can any one tell me the procedure and any sample code i,e any example
Thanks & Regards
Krish

You should post your thread to ...:
http://forums.oracle.com/forums/forum.jspa?forumID=183
providing all necessary info......!!!!
Greetings...
Sim

Problem with extract data from R/3 to BW

I want extract data from R/3 system.the problem is when I run the infopackage,I can see the status is yellow In the Monitor and the data can't extract to BW.but in the source system,the job of extracting data has been finished.
(use the Tcode: WE02)the Outbound IDocs and Inbound IDocs are OK，but in the BW system ,I canu2019t see the Inbound IDocs.
In the source system use Tcode: SM50,I can see the process SAPLQOWK is running for a long time and run out system memory.
use Tcode : SM58, I execute LUW, the data can transfer to BW system,but the report SAPLQOWK is not stop.
it would be stopped by canceling the process manually in operating system or it run out time.
why can't i extract data from R/3 system successfully ?
why the process SAPLQOWK can't finish?
how can i do?

Hi,
I hope the note 527481 would help you to sort out this problem.
Regards,
Anil Kumar Sharma .P

Problem when extracting data from R/3 to BI

Hi Experts,
I am facing a strange problem. While i am extracting data from R/3 yo BI. One Infopackage is running successfully and i can see the data at Bi side. But while I am running another infopackage for another data source it is taking long time and at last loading results into failure.
I have gone through SDN also but not able to find any inputs.
I think it might be the reason with the Idocs. The error it is giving is
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I am not able to see list of Idocs in sm58.
What might be the reoson?
Regards,
sridhar

Hi,
See if its a full schedule it again by deleting any old requests....
And then when going thru job overview>in the sourcesystem>u can execute there itself and chk the status of the job...
If its no there then the job might have missed up due to some unfair reason....it happens sometimes also..some times it will be in scheduled only....once select all active/cancled/finished and so on...
And also chk under details tab...under extraction....whether data selection scheduled and requested and finished....????
If not there try to run it again and at the same moment monitor in source with jobname as BIREQU_* and select all input entries as canceled/active/finished......
rgds,

Error Occures while loading data from Source system to Target ODS

Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,

Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141

SSIS 2014 - Best way to use parameters to extract data from sources

Hi,
Is there any way besides SQL COMMAND FROM VARIABLE that I could use to extract data from Oracle \ SQL Server tables that filters the amount of data?
For instance, I want to extract in all sources data beyond 2007 so I wanted to use this year as a parameter in all OLEDB sources I will be using.
Thank you

Hi Pedro,
Based on my research, the Microsoft OLE DB provider for Oracle and Oracle Provider for OLEDB does not allow parameterized queries in OLE DB Source. So the best method to achieve your requirement is still using SQL COMMAND FROM VARIABLE option as Data access
mode.
Considering construct your query in a variable which you can include your parameter dynamically with another variable and set the variable properties "EvaluateAsExpression" to true. In the Expression Property set the value to:
"select * from test
where Col1='" + (DT_WSTR,100) @[User::para] +"'"
The following two similar threads are for your references:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/97f23ef5-35ac-466e-87d9-69edac2525f9/ssis-oledb-source-problem
https://social.msdn.microsoft.com/forums/sqlserver/en-US/32a70752-adab-4180-8b6d-f6100b3e356c/pass-variable-for-ole-db-source-with-connection-to-oracle
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Extracting data from Legacy system - How do we get the data into a normaliz

Hi All,
Requirement that I have now is to get the data from 6 different tables ORACLE database to BI using DB Connect, where in each of those 6 tables has the transactional data as well - If it is only 2 tables, would have been creating a view and get the data. Each of the 6 tables are linked to one other by the Primary Key and Foreign key relation ship.
If it is from ERP system we would have created a Functional Module.
Please advice me on how to get the data to BI end from those tables in Legacy system.
Thanks in advance.

Anil:
I recommend following Ralph Kimball's EDW data modeling principles.
Have a staging layer of DSO's with data dump from source system. So have 6 different DSO's extracting data from 6 tables from source system independently.
Then have an integeration layer of DSO's depending on requirement. You could combine data from 2 or more DSO's here based on requirement and integrate your data here. Use primary key foreign key relationships here to do look ups or direct loads to do your business logic.
Then have an analytical layer of InfoCubes, MultiProviders, InfoSets as required.
The 3 layered architecture is a standard best practice that i have seen followed in many organizations. You could search for this type of architecture online under EDW (Enterprise Data Warehouse). There should be plenty of information available.
Good Luck.
MP.

Problems to extract data from 0HR_PY_1

Hi Experts,
I'm using BW v.7 to extract data from standard data source 0HR_PY_1 of SAP-ECC, with delta update.
When I try to extract the data job finishes with error (red status) and all data-packages have error message ABORT in customer routine 9998.
Although I'm using BW v.7 I have activated 3.x extraction (DataSouce -> InfoSource -> Update Rule).
Any help will be welcome!
Alex

I've found the problem by myself

Problems in extracting data from r/3

Hi Guys
I am extracting data from r/3(QA) to BW(QA), into an ODS. Now, my previous load failed but i saw from RSMO that the load had more than 4 million records. I am scheduled the load again. And in monitor(RSMO) it says:
(yellow symbol) 17:24:50 ( 762040 From 0 Records )
and in status, it says everything ok, no error, process is still goin on. And in details this is the last line at the moment:
"Transfer (IDocs and TRFC): Missing messages or warnings"
Data Package 29 : arrived in BW ; Processing : Selected number does not agree with transferred n
"Processing (data packet): Warning received"
Data Package 29 ( 23810 Records ) : Everything OK.
I am assuming that there are 100 packages like this in total. Will my data load into the ODS finally??
Thanks.

Hi Chintai,
If you are extracting delta records, then you can view the number of records in RSA7.
I suggest you go to details tab of the monitor, you would be knowing the activites that are taking place..
Check if your transfer rules, update rules are done for atleast for few of the data packages.
Regards
Manga(Assign points)

Problem in extracting data from source system

Similar Messages

Maybe you are looking for