Problem in field symbols in ecc6.0

i have the following code written in 4.6 version now i am executing the old report in 6.0 but i am facing with some unicode error.
FIELD-SYMBOLS:
<line_of_bs_table> LIKE tbl1024,
READ TABLE bs_table INDEX row_bst ASSIGNING <line_of_bs_table> .
buffer_bsbuffer_ptr(aux) = <line_of_bs_table> >col_bst.
tb1024 is standard sap structure for storing buffer contents
i have the following error in ecc 6.0
structure type '<line_of_bs_table> >+col_bst' does not start with a charecter type field in unicode programs in such cases
offset/ length declarations are not allowed.
can any one tell how can a field symbol structure is changed to charecter type.

FIELD-SYMBOLS:
<line_of_bs_table> LIKE tbl1024.
DATA w_wa(1024) type c.
READ TABLE bs_table INDEX row_bst ASSIGNING <line_of_bs_table> .
move <line_of_bs_table> to w_wa.
buffer_bsbuffer_ptr(aux) = w_wacol_bst.
i am still getting error like
'<line_of_bs_table> and w_wa are not mutually convertible.'
and i try to use move corresponding instead of move but then it says
'w_wa is not internal table or structure with the heade line'.

Similar Messages

Problem with field symbols in ecc 6.0

i have the following code written in 4.6 version now i am executing the old report in 6.0 but i am facing with some unicode error.
FIELD-SYMBOLS:
 <line_of_bs_table> LIKE tbl1024,
 READ TABLE bs_table INDEX row_bst ASSIGNING <line_of_bs_table> .
 buffer_bsbuffer_ptr(aux) = <line_of_bs_table> >col_bst.
tb1024 is standard sap structure for storing buffer contents
i have the following error in ecc 6.0
structure type '<line_of_bs_table> >+col_bst' does not start with a charecter type field in unicode programs in such cases
offset/ length declarations are not allowed.
can any one tell how can a field symbol structure is changed to charecter type.

Hi elinuk,
you have already posted this thread in the ABAP general forum under problem in field symbols in ecc6.0 and I think that this forum is more related to this issue than the DMS forum. So please close this thread and investigate this issue further in the ABAP general forum.
Best regards,
Christoph

Problem with FIELD SYMBOL upgrading from 46c to ECC6.0

Hi people... i'm having big trouble making an upgrade from 4.6c to ECC6.0 with this portion of code of Z's programm.
In the line
ASSIGN (w_field) TO <fs_field>.
i don't see any assigment, so <fs_field> remains empty, when enters into firts IF conditions it is TRUE, then go into second IF condition, it is FALSE, and finally assing
<fs_field> = '/'.
, at this point i have a DUMP telling me MOVE_TO_LIT_NOTALLOWED_NODATA
I'm try any way of definition, assigment, but always i have a DUMP.
Someone can give a hand with this issue!
Thanks in advance!!!
This is the full code from the FORM with the problem.
* FORM GRABA *
* --> VALUE(P_TABLE) *
FORM graba USING value(p_table) TYPE c.
DATA:
 w_field(60),
 w_dd03l TYPE dd03l.
FIELD-SYMBOLS <fs_field>.
CLEAR w_flag.
CASE p_table.
 WHEN 'BGR00'.
 d_bgr00-group = w_batin.
 d_bgr00-mandt = sy-mandt.
 d_bgr00-usnam = sy-uname.
 d_bgr00-xkeep = 'X'.
 d_bgr00-nodata = '/'.
 d_bgr00-stype = 0.
 TRANSFER d_bgr00 TO w_fname.
 WHEN 'BBKPF'.
 LOOP AT gt_dd03l INTO w_dd03l WHERE tabname EQ p_table.
 CONCATENATE
 'd_'
 w_dd03l-tabname
 w_dd03l-fieldname
 INTO w_field.
 ASSIGN (w_field) TO <fs_field>.
 IF <fs_field> IS INITIAL OR <fs_field> EQ '/'.
 IF w_dd03l-fieldname EQ 'TBNAM'.
 <fs_field> = p_table.
 ELSE.
 <fs_field> = '/'.
 ENDIF.
 ELSE.
 w_flag = 'X'.
 ENDIF.
 ENDLOOP.
 TRANSFER d_bbkpf TO w_fname.
 WHEN 'BBSEG'.
 LOOP AT gt_dd03l INTO w_dd03l WHERE tabname EQ p_table.
 CONCATENATE
 'd_'
 w_dd03l-tabname
 w_dd03l-fieldname
 INTO w_field.
 ASSIGN (w_field) TO <fs_field>.
 IF <fs_field> IS INITIAL OR <fs_field> EQ '/'.
 IF w_dd03l-fieldname EQ 'TBNAM'.
 <fs_field> = p_table.
 ELSE.
 <fs_field> = '/'.
 ENDIF.
 ELSE.
 w_flag = 'X'.
 ENDIF.
 ENDLOOP.
 TRANSFER d_bbseg TO w_fname.
ENDCASE.
ENDFORM.
Edited by: Matt on Dec 15, 2008 5:03 PM - Made subject more informative

Gentlemen:
The problem around this statement:
ASSIGN (w_field) TO <fs_field>
is explained as follows:
1. In ABAP language, there are two ways for assigning a new value to a field-symbol.
- Sentence: ASSIGN (values) TO <my_field_symbol>.
In this case, the <my_field_symbol> receives from (w_field) the data type and value content of this variable. So, we keep that a FSymbol is assigned and, at the same time, receives an initial value.
- Sentence: <my_field_symbol> = '/' or <my_field_symbol> = my_var.
In this way, we only pass the content of the variable next to = sign. But before this, the field-symbol must had been assigned (using ASSIGN statement), in another case, the compiler raises an exception.
Following the example of Federico... I think he tried to assign a field like this (please, supose the program imports the structure of a database table with a standard function, into a internal table which is looped by the work area w_field ):
- If w_field contains 'BKPF-WERKS', so sentence ASSIGN will affect the field symbol, passing to this the data type and current content of table field BKPF-WERKS.
- If w_field contains 'BKPF-.INCLUDE': *the column .INCLUDE obviously is not associated with a data type... so our statement ASSIGN... TO... never pass any data type or value to our field-symbol. So that, this field is never initialized properly, and when inmmediately you try to execute something like this: <my_field_symbol> = '/', the game (program) is over.. XD
I hope this post was helpful for anyone...
Best Regards!!
RRG
ABAPer(u) - EVOLution

Problem with field-symbol values not updating

H i ,
 I have following piece of code :
Assigning Dynamic Table to Field Symbol
 ASSIGN ist_dyn_table->* TO <gs_dyn_table>.
* Creating Structure for dynamic table
 CREATE DATA gs_dyn_line LIKE LINE OF <gs_dyn_table>.
* Creating line type for the Dynamic Values
 ASSIGN gs_dyn_line->* TO <gs_line>.
* Populating values in the dynamic table
 LOOP AT ist_pwcl_main INTO wa_pwcl_main.
 ASSIGN COMPONENT gc_fld_werks OF STRUCTURE <gs_line> TO <gs_field>.
 1 IF sy-subrc EQ 0.
 2 <gs_field> = wa_pwcl_main-werks.
 3 ENDIF.
 5 IF <gs_field> IS ASSIGNED.
 6 <gs_field> = wa_pwcl_main-vbeln.
 ENDIF.
7 IF <gs_field> IS ASSIGNED.
8 <gs_field> = wa_pwcl_main-posnr.
 ENDIF.
 IF <gs_field> IS ASSIGNED.
 <gs_field> = wa_pwcl_main-quant.
 ENDIF.
on debugging at line 2 <gs_filed> contains the value of werks .
but at line 6 <gs_field> contains value of vbeln as 0 and at 8 of posnr as 0 .
What can be the problem ? Other values are getting assigned properly .
Plz help ...
Regards .

Hi,
Assigning Dynamic Table to Field Symbol
 ASSIGN ist_dyn_table->* TO <gs_dyn_table>.
Creating Structure for dynamic table
 CREATE DATA gs_dyn_line LIKE LINE OF <gs_dyn_table>.
Creating line type for the Dynamic Values
 ASSIGN gs_dyn_line->* TO <gs_line>.
Populating values in the dynamic table
 LOOP AT ist_pwcl_main INTO wa_pwcl_main.
 ASSIGN COMPONENT gc_fld_werks OF STRUCTURE <gs_line> TO <gs_field>.
 1 IF sy-subrc EQ 0.
 2 <gs_field> = wa_pwcl_main-werks.
 3 ENDIF.
 5 IF <gs_field> IS ASSIGNED.
 6 <gs_field> = wa_pwcl_main-vbeln.
 ENDIF.
7 IF <gs_field> IS ASSIGNED.
8 <gs_field> = wa_pwcl_main-posnr.
 ENDIF.
 IF <gs_field> IS ASSIGNED.
 <gs_field> = wa_pwcl_main-quant.
 ENDIF.
Based on your coding above, <gs_field> has been assigned with data type 'WERKS' (i'd assume component gc_fld_werks found from structure <gs_line> is a plant typed), which is a CHAR(4) data type.
Meaning, if <gs_field> is assigned with Plant type value, e.g. <gs_field> = '1000', field symbol <gs_field> will contain 4 character only.
At line 6, if wa_pwcl_main-vbeln = '0000201000', <gs_field> is only capturing '0000' only. This is also happened to line 8.
However, it looks like that <gs_field> is getting over-write if ASSIGNED statement returns SY-SUBRC = 0.
Hope this helps.
Regards,
Patrick

Problem with field-symbols in UNICODE conversion

Hi all.
I'm in a UNICODE conversion project and I have a problem with a program that uses field-symbols.
DATA: BEGIN OF wa_data_aux,
 mandt LIKE zindices-mandt,
 kschl LIKE zindices-kschl,
 datab LIKE zindices-datab,
 valor LIKE zindices-valor,
 descripcion LIKE zindices-descripcion,
 ernam LIKE zindices-ernam,
 erdat LIKE zindices-erdat,
 waers LIKE zindices-waers,
 END OF wa_data_aux.
FIELD-SYMBOLS:
 <fs2> TYPE ANY,
 <fs3> LIKE wa_data_aux.
 <fs2> = <fs3>.
This assignment results in a DUMP.
Can anybody help me to solve this problem?
Thanks!!

TYPES: BEGIN OF wa_data_aux,
 mandt TYPE mandt,
 kschl TYPE kschl,
 erdat TYPE d,
 waers TYPE waers,
 END OF wa_data_aux.
DATA: w_aux TYPE wa_data_aux.
FIELD-SYMBOLS:
<fs2> TYPE ANY,
<fs3> TYPE wa_data_aux.
w_aux-mandt = '300'.
ASSIGN w_aux TO <fs3>.
ASSIGN <fs3> TO <fs2>.
WRITE : / <fs2>.
GBY.

Problem with field symbol

Hi!
I have a problem with a field-symbol like this:
DATA: gt_coep_ext TYPE kaep_t_coep_ext.
field-symbols <gt_data> type table.
ASSIGN gt_coep_ext TO <gt_pos_data>
This field symbol is used in the FM REUSE_ALV_GRID_DISPLAY as output table. I need add two fields in this <gt_data>. Is there any way to add new fields in the <gt_data> structure.
Thanks!!

Create your one Fieldcat
Global data declaration ***
TYPE-POOLS: SLIS.
<types: ... . " user definded types>
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: G_REPID LIKE SY-REPID.
DATA: GT_OUTTAB TYPE <UD_STRUCT> OCCURS 0 WITH HEADER LINE.
<data: ... . " user specific data>
Initialization field catalog ***
INITIALIZATION.
G_REPID = SY-REPID.
PERFORM FIELDCAT_INIT USING GT_FIELDCAT[].
Data selection ***
START-OF-SELECTION.
PERFORM SELECT_DATA TABLES GT_OUTTAB.
Display list ***
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = G_REPID
 IT_FIELDCAT = GT_FIELDCAT[]
 TABLES
 T_OUTTAB = GT_OUTTAB.
FORMS ***
FORM FIELDCAT_INIT USING RT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
 DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
 DATA: POS TYPE I VALUE 1.
Initialize keyfield(s)
CLEAR LS_FIELDCAT.
LS_FIELDCAT-COL_POS = POS.
LS_FIELDCAT-FIELDNAME = <GT_OUTTAB_FIELD_NAME>.
LS_FIELDCAT-REF_FIELDNAME = <DDIC_REF_FIELD_NAME>.
LS_FIELDCAT-REF_TABNAME = <DDIC_REF_TABLE_NAME>.
LS_FIELDCAT-KEY = 'X'. " sets key field
 APPEND LS_FIELDCAT TO RT_FIELDCAT.
Initialize normal field(s)
POS = POS + 1.
clear ls_fieldcat.
ls_fieldcat-col_pos = pos.
LS_FIELDCAT-FIELDNAME = <GT_OUTTAB_FIELD_NAME>.
LS_FIELDCAT-REF_FIELDNAME = <DDIC_REF_FIELD_NAME>.
LS_FIELDCAT-REF_TABNAME = <DDIC_REF_TABLE_NAME>.
 APPEND LS_FIELDCAT TO RT_FIELDCAT.
Initialize hidden field(s)
POS = POS + 1.
clear ls_fieldcat.
ls_fieldcat-col_pos = pos.
LS_FIELDCAT-FIELDNAME = <GT_OUTTAB_FIELD_NAME>.
LS_FIELDCAT-REF_FIELDNAME = <DDIC_REF_FIELD_NAME>.
LS_FIELDCAT-REF_TABNAME = <DDIC_REF_TABLE_NAME>.
LS_FIELDCAT-NO_OUT = 'X'. " sets hidden field
 APPEND LS_FIELDCAT TO RT_FIELDCAT.
ENDFORM. " fieldcat_init
FORM SELECT_DATA TABLES RT_OUTTAB LIKE GT_OUTTAB[].
<user specific data selection>
ENDFORM. " select_data

Problem with field-symbols usage

Hi guys,
I am trying to read a record of table gi_outtab as follows:
read table gi_outtab into wa_outtab index wa_ir2_data_changed-row_id.
And now i want the value of a field of wa_outtab and this field is contained in a field-symbol <field> .
I thought wa_outtab-<field> would give the value for that field. But it gives syntax error saying component doesn't exist.How do I fix it ? Any help or sample code to fix this error is greatly appreciated.The code is below.
Thanks,
SHK
I have fieldname info and row index info in wa_ir2_data_changed.I assign field-name info to a field-symbol.wa_outtab-<field> gives error saying no component like that exists. <field> dynamically changes for ever iteration of the loop below.How do I fix it ?
data : wa_ir2_data_changed like line of ir2_data_changed->mt_good_cells.
field-symbols : <field> type ANY .
loop at ir2_data_changed->mt_good_cells into wa_ir2_data_changed.
assign wa_ir2_data_changed-fieldname to <field> .
read table gi_outtab into wa_outtab index wa_ir2_data_changed-row_id.
call method ir2_data_changed->modify_cell
 exporting i_row_id = wa_ir2_data_changed-row_id
 i_fieldname = wa_ir2_data_changed-fieldname
 i_value = wa_outtab-<field>.
endloop.
wa_ir2_data_changed has 3 components.
a) row_id
b) fieldname
c) value

The following code fixed it.Thanks Suresh for the tip.
loop at ir2_data_changed->mt_good_cells into wa_ir2_data_changed.
read table gi_outtab into wa_outtab index wa_ir2_data_changed-row_id.
ASSIGN COMPONENT wa_ir2_data_changed-fieldname of structure wa_outtab to
<field>.
call method ir2_data_changed->modify_cell
 exporting i_row_id = wa_ir2_data_changed-row_id
 i_fieldname = wa_ir2_data_changed-fieldname
 i_value = <field>.
endloop.

Problem with field symbols

Hi ,
I have to use an internal table in a form which can have differnet structures at diffrenet points of time.
As the internal table is dynamic , I have declared a field symbol for this.I need to use th efields in this internal table for processing inside a loop.But because i have to use an untyped field symbol , I am getting an error that the field QUANT is not there in <fs_order_tab>.
Please let me know what to do in such a situation.Thanks in advance.
FIELD-SYMBOLS :<fs_order_tab> TYPE STANDARD TABLE,
 <fs_order_wa> TYPE ANY.
ASSIGN i_so TO <fs_order_tab>.
ASSIGN wa_so TO <fs_order_wa>.
LOOP AT<fs_order_tab> into <fs_order_wa>..
l_quant = <fs_order_wa>-QUANT.
ENDLOOP.

Hi Rashmi,
Kindly follow the steps given below.
After assigning the internal table to the field symbol,
create 1 more field symbols of the following type
<fs_quant> TYPE vbep-bmeng,
Create 1 constant.
 CONSTANTS: lc_quant TYPE c LENGTH 5 VALUE 'QUANT'.
and then assign the field quantity to the field symbol
 ASSIGN COMPONENT lc_quant OF STRUCTURE <fs_order_wa> TO <fs_quant>.
Inside the loop write the following statement
l_quant = <fs_quant>
Hope this helps in solving your query.
Edited by: Kadian.Arjun on Nov 22, 2010 9:56 AM

Problem with Field-symbols when copying code from 4.7 to 4.6C

Dear SDN
I developed the code below for 4.7 system. It works fine on 4.7, but it is failing to compile on 4.6C.
field-symbols : <pnnnn> type any.
assign ('wa') to <pnnnn>.
move-corresponding p0001 to <pnnnn>. " Error <pnnnn> is not an internal table with a header line
unassign <pnnnn>.
Can anyone please assist?
Regards
Kriger

You cannot use MOVE-CORRESPONDING with untyped variables in 4.6c. If you move infotype data between infotype buffer (of type PRELP) and infotype workarea, then you should use MOVE.

Problem using field symbols in Query...

Hi,
I am fetching the name of the table and field which I will be using in the query using field symbols. But it gives syntax error...
select single OBJECTTABLE OBJECTFIELD into help_numtab from Zobjectname
where OBJECTNAME = P_OBJECT.
field-symbols : <number> type any.
field-symbols : <module> type any.
ASSIGN help_numtab-OBjectfield to <number>.
ASSIGN help_numtab-OBjecttable to <module>.
/* Here <number> = MATNR and <module> = MARA.
select <NUMBER> into table help_item
from <MODULE>
where ERNAM = SY-UNAME.
This gives a syntax error which says <module> is not defined in ABAP DDIC.

instead of field symbols, you ccan try this..
select (help_numtab-OBjectfield) into table help_item
from (help_numtab-OBjecttable)
where ERNAM = SY-UNAME.
~Suresh

At new field symbol -field in ECC6

Hi experts,
We are upgrading to ECC6 from 4.7. The command ' at new <wa_base>-vakey.' works in 4.7 but gives error ' "<WA_BASE>-VAKEY" is not defined as a field symbol ' in ECC6. I can't find any SAP Notes or answers in the Network Forum or F1 Help. Does anybody know how my code should be changed?
Thanks, Brigitte

I believe that it is upgrade relevant: when I do program check in 4.7 I get no errors and when I check the same program in our ECC6 development client, I get the error. Anyway, here's the relevant code - as you can see its nothing too difficult:
data: begin of it_base1 occurs 0,
 vakey type vakey,
 table type setyp,
 base type ty_base,
 end of it_base1.
form setup_conditions_base using cond_tab like it_base1[]
field-symbols: <wa_base> like line of it_base1,
 loop at cond_tab assigning <wa_base>.
 ... (do some stuff) ...
 at new <wa_base>-vakey.
 ... (do more stuff) ...
 end at
 ... etc ...

Field Symbol - Assign type conflict.

Hi, i active successfully my program. This is the code:
DATA ls_g_oref_appl(21) TYPE C.
FIELD-SYMBOLS: <fs_appl> TYPE REF TO cl_ftr_mj_appl.
ls_g_oref_appl = '(SAPLTB4E)g_oref_appl'.
ASSIGN (ls_g_oref_appl) TO <fs_appl>.
But when i execute it, i get a dump with this message:
"ASSIGN_TYPE_CONFLICT : You attempted to assign a field to a typed field symbol,but the field does not have the required type. "
Also, i get sy-subrc = 0, so the field symbol <fs_appl> has a value assign.
Any suggestions? I tried by changing the type of the field to ANY, but it didnt compile.
Thanks for the help,
Karla

Hi Daniel, I verified again the type of g_oref_appl, and it is : cl_ftr_mj_appl. I check the top of the include and g_oref_appl is there :
' DATA g_oref_appl TYPE REF TO cl_ftr_mj_appl. '
Hi, Naren, also i tried with the TYPE ANY, but it doesnt compile.
I notice this:
CLASS cl_ftr_mj_appl DEFINITION ABSTRACT.
Is there a problem with field symbols and abstracts class???
Thanks for all your help,
Karla.
Edited by: Karla Tinoco on Mar 5, 2008 11:46 PM

Problem in assigning field symbol to a nested internal table

Hi All,
I have searched the forum but could not find a solution to this problem. I have a requirement where I need to define an internal table within an internal table, so I have used pointer within the outer internal table(itab2) which point to the inner table. However, I am facing problem while assigning the pointer.
data: begin of struct1 occurs 0,
 fld3(10) type C,
 end of struct1.
data: begin of itab2 occurs 0,
 fld1(10) type C,
 fld2(10) type C,
 p_inner like ref to struct1,
 end of itab2.
field-symbols <inner_table> type any.
I want to assign "itab2->p_inner->* " to "<inner_table>".
However, the following statement is Not working:
assign itab2->p_inner->* to <inner_table>.
I want to fill the values within fields fld1, fld2 and fld3 and append it in itab2.
The final table should be like:
ITAB2:
fld1 fld2 fld3
aa bb cc
 dd
 ee
11 22 33
 44
 55
I have tried many other ways too but could not suceed, please help.
Thanks,
Vishal.

Thanks Matt,
But how do I append the values within this internal table ??
When I am using the following code:
ls_wa-fld3 = 'A'.
ls_wa-t_in-fld1 = 'B'.
ls_wa-t_in-fld2 = 'C'.
ls_wa-t_in-fld1 = 'D'.
ls_wa-t_in-fld2 = 'E'.
append ls_wa to lt_tab.
Its giving an error that:
The data object "LS_WA" does not have a component called "T_IN-FLD1".
I wanted the values to be appended in the following way in lt_tab:
fld3 fld1 fld2
A B C
 D E
Please help.

Problem with slis_t_specialcol_alv Field Symbol Assignment

I have created a dynamic internal table (runtime determined number of columns) to contain data to be displayed in an ALV. Ive also made ensured that the last column of the dynamic itab is of type 'slis_t_specialcol_alv' and named CINFO to contain color information for that particular row. In the code below the dynamic itab is pointed to by field symbol <dyn_table> while the work area for it would be <dyn_wa>.
Somewhere down the line I attempt to assign the CINFO component of the current row of the itab to a field symbol called <fs_cinfo> typed as slist_t_specialcol_alv (Same as CINFO).
I used the code:
ASSIGN COMPONENT 'CINFO' OF STRUCTURE <dyn_wa> TO <fs_cinfo>.
This gives me the runtime error:
Type conflict in the ASSIGN statement in the program "ZHRR001_TEMMATRIX".
You attempted to assign a field to a typed field symbol,
but the field does not have the required type. 
I am unsure why this happens as both the component CINFO and FS <fs_cinfo> are of type slist_t_specialcol_alv.
For some odd reason though during debugging, I took a look at the <dyn_wa> structure and the component type of CINFO was displayed as C???
Here is the relevant portion of code (creation of dynamic itab and attempting to assign <fs_cinfo>)
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
 <dyn_wa>.
FIELD-SYMBOLS: <fs_cinfo> TYPE slist_t_specialcol_alv.
DATA: lw_cinfo TYPE slis_specialcol_alv.
DATA: li_fldcat TYPE lvc_t_fcat,
 lw_fldcat TYPE lvc_s_fcat.
*Create internal table fields (they will be called Field1, Field2, etc)
*Last column will be named 'CINFO' to contain row color information
DO l_alvcolumncount TIMES.
index = sy-index.
IF index <> l_alvcolumncount.
 CLEAR lw_fldcat.
 CONCATENATE 'Field' index INTO lw_fldcat-fieldname .
 CONDENSE lw_fldcat-fieldname NO-GAPS.
 lw_fldcat-datatype = 'STRING'.
* lw_fldcat-intlen = 5.
 APPEND lw_fldcat TO li_fldcat .
ELSE.
 CLEAR lw_fldcat.
 lw_fldcat-fieldname = 'CINFO'.
 CONDENSE lw_fldcat-fieldname NO-GAPS.
 lw_fldcat-datatype = 'slis_t_specialcol_alv'.
 APPEND lw_fldcat TO li_fldcat.
ENDIF.
ENDDO.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
 it_fieldcatalog = li_fldcat
IMPORTING
 ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
*Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
ASSIGN COMPONENT 'CINFO' OF STRUCTURE <dyn_wa> TO <fs_cinfo>.
* Color this cell
lw_cinfo-fieldname = fieldname.
lw_cinfo-color-col = 6.
APPEND lw_cinfo TO <fs_cinfo>.
Message was edited by: Sow Yong Wong

Hello Sow
There is a big problem in the program: you are mixing types used for FM-based ALV (SLIS_...) and ABAP-OO based ALV (LVC_...).
For ABAP-OO based row colouring you have to define your itab like this:
TYPES: ty_s_outtab.
INCLUDE TYPE kna1. " just an example
TYPES: rowcolor(4) TYPE c.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab TYPE STANDARD TABLE of ty_s_outtab
 WITH DEFAULT KEY.
In the layout (LVC_S_LAYO) you have to set ls_layout-info_fname = 'ROWCOLOR'.
ROWCOLOR has to be filled according to Cxyz whereas
- x = color
- y = inverse on/off
- z = intensified on/off
For documentation please refer to <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907">An Easy Reference to ALV Grid Control</a>
Regards
Uwe

Problem trying to create FIELD SYMBOLS in BADI.

Hi guys!
I'm trying to create a Field Symbol in method CHECK of BADI me_process_req_cust (well, I'm working on a Z implementation).
The problem is that I'm trying to create a FIELD SYMBOL and when I check the syntaxsis, I receive the next error:
Clase ZCL_IM_MM_PURREQ_UPDATE,Método IF_EX_ME_PROCESS_REQ_CUST~CHECK
Names may only consist of the characters "A-Z", "0-9" and "_". In
addition, they may not begin with a number.
This is the code:
FIELD-SYMBOLS: <sy-mereq> TYPE mereq3328-afnam.
Any idea????
Thanks in advance!
Bet

Hi Silveria,
The problem lies in
FIELD-SYMBOLS: <sy-mereq> TYPE mereq3328-afnam.
instead of that it should be something like this
FIELD-SYMBOLS: <sy_mereq> TYPE mereq3328-afnam.
With your code you will be getting a syntax error saying sy-mereq is not defined,as it will be looking for the mereq in the system fields.
Regards
Abhinab Mishra

Problem in field symbols in ecc6.0

Similar Messages

Maybe you are looking for