Problem in File Sender Adapter in File with quotes

Hi experts.
We're having a problem in File Sender Adpapter.
We've configured the adapter with FCC. We use the fieldSeparator = ; to convert the file to xml.
The problem arises when between two ; appears a quote. For insantce in this line:
HUMALVAL MASCOTAS S.L.;"AV/DE EUROPA SN;P.IND.ALCORCO;28922;ALCORCON;40.349968;-3.847452;
The adapter shows this error:
More elements in file csv structure than field names specified.
If the line was (without "):
HUMALVAL MASCOTAS S.L.;AV/DE EUROPA SN;P.IND.ALCORCO;28922;ALCORCON;40.349968;-3.847452;
everything would work correctly.
How could we solve this?
Thanks in advance.
Regards.

Hi,
Please use xml.enclosureSign=u201C in your sender FCC.
Hopes this helps to you.
Regards,
P.Rajesh

Similar Messages

File Sender adapter - source file name - weird

Hi all,
We have a sender file adapter polling an ftp location. The Dynamic config has been enabled to get the source file name.
The actual file name is - "hrmd.xml", but in the dynamic configuration node, in sxmb_moni, the fileName is shown as ./hrmd.xml.
This does not occur with any other file sender adapter comm channels polling ftp locations.
I guess this has something to do with the ftp server. Did anyone face this issue?

the fileName is shown as ./hrmd.xml
The file name surely cant have a / in it....such characters are not allowed.
is there any way we can change the fileName message attribute once the file is picked up
Create a UDF for Dynamic Configuration and change the name as per your requirement (in XI)....the source file may be having proper format for name and i assume that you have to change it for receiver file name

File-Sender: Verification of file content during file content conversion

Hello,
I have a question regarding file verification when using the file-sender adapter.
I got a flat file (.csv) that I convert into XML with the file-sender adapter and file-content-conversion.
In the file there is a column RecTyp that is my KeyFieldValue. Possible values for RecTyp are B, D, U, T.
So far so good. All this works perfectly.
If (due to an error) there is another value in RecTyp than the 4 mentioned above (B;D;U;T) the file adapter ignores this row today. And here begins my issue:
I want to change this behavior. That means in detail, I want to check if there is another value in my KeyFieldValue RecTyp than specified. If this is the case an exception should be thrown. The whole message should not be delivered.
We had the idea to use the module-processor for this verification.
But may be there are other suggestions. Or may be some one can provide an appropriate module that is already written, etc.
Does anyone have an idea?
Kind regards,
Tobias

Hi,
It is better to pick the file in generic way i.e Row by Row and then go with the validation with the help of Adapter Modules or in the Mapping.
For more-
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
Thanks,
Moorthy

File Sender adapter with File content conversion

Hi
I'm having problems picking up a flat file that has some junk characters in the file.
I'm usign a file sender adapter with file content conversion. The adapters shows the following error-
Conversion of complete file content of to XML format failed around position 0: sun.io.MalformedInputException
this is the sample data with junk char's -
A20099201009999009999060815160505051700130008151vÿÿÿÿ³ r 0OK0476 31N016227241915840IV 00840 ÿÿÿ ÿ ÿÿÿÿÿÿÿÿ ÿ ÿÿÿ
There is not much in the file content conversion. This is a fixed length file, I'm just pickign it up & passing it to an inbound proxy. All my processing is in the proxy.
I'd appreciate any suggestions.
Thanks
Rachana

Hi Rachana,
Do you use a specific "encoding" like UTF-8 or ISO-8859-1 in your Sender CC?
To be simple, Encoding is linked to country, you can find all "iso-nnnn" via google or some of them in sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Moreover, with your source file opened thanks to Notepad (for instance), use option "save UNDER", you will the encoding use by your file
Mickael

Problem in file sender adapter for newline character

Hi All,
I'm trying to read a file of only one record with the following fields.
Name
Age
Place
Each field is seperated by a new line which is the cause of the problem.
The problem is the value 'nl' for x.fieldSeperator is not been recognised in file sender adapter.
The adapter creates a new record (new XML) for each individual field seperated by new line.
I've tried even with the corresponding hexadecimal values '0x0a' and '0x0d'.
Looking for some help.
Thanks,
Joe.

Hi Shabarish,
Thanks for your reply. But I tried that too already... It also didn't work..
File adapter is successful... But it generates seperate records for each fields that's wat the prob is..
Thanks,
Joe.

How to handle flat file with variable delimiters in the file sender adapter

Hi friends,
I have some flat files in the ftp server and hope to poll them into XI, but before processing in XI, I hope to do some content conversion in the file sender adapter, according to the general solution, I just need to specify the field names, field seperator, end seperator, etc. But the questions is:
The fileds in the test data may have different amount of delimiters (,), for example:
ORD01,,,Z4XS,6100001746,,,,,2,1
OBJ01,,,,,,,,,,4,3
Some fileds only have 1 ',' as the delimiter, but some of them have multiple ','.
How can I handle it in the content conversion?
Regards,
Bean

Hi Bing,
Plz do refer the following blogs u will get an idea:
File content conversion Blogs
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Vinod.

File Sender Adapter with FTP protocol

Hi,
I implementet a file sender adapter with FTP protocol. There is a problem: the sender processes the files even if they're in use by another application.
I.E. If another application put files (via ftp) in the sender work directory (that is on ftp), the sender processes those files before their transfer is completed.
I don't want that this sender in a communication channel in PI 7.1, imports files in the system when they aren't completed yet.
There are some ways to block sender before it processes incompleted files (in an ftp)?
Thanks
Matteo

Hi,
File sender adapter provides a check for NFS mode
+Check this
To specify additional parameters in the adapter configuration, set the Advanced Modeindicator.
● Msecs to Wait Before Modification Check
Enter the number of milliseconds that the adapter must wait before it checks whether the files have been changed.
This parameter is not available if you have selected File Content Conversion as the Message Protocoland then made an entry under Recordsets per Message that splits an input file into several messages.
This parameter is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.+
Other approach can be to apply OS level checks
Regards
Suraj

File sender adapter: archiving not possible with transp.prot "filesystem,

Hi XI gurus,
in my FILE sender adapter I want to archive the processed files to a separate sub-directory of the "in" directory.
It works if I use transport protocoll "FTP" with a specific user
but it don't works when I use transport protocoll "file system (NFS)".
the xi user has all permission on the directories.
file system is on a UNIX machine.
Has anybody an idea why archiving only works with transf.protocoll FTP ?
Thanx very much in advance
regards
Hans

Hi,
Check this thread for same problem Re: NFS Sender File Adapter Source Directory
Thanks!

FTP-Sender Adapter ignores files with "known filenames"

Hello experts,
the scenario is FTP -> XI -> IDOC and we have problems with the polling of the files. In communication channel monitoring everything is working fine, but in the FTP folder some files are ignored, although the communication channel is set up for all *.txt-files.
My question is, is it possible that the FTP sender adapter ignores files, if it already has processed a file with the same filename? After renaming the files they all were picked up and archived into another folder. How can I configure the communication channel to pick up ALL *.txt-files in the out-folder?
Best regards
David

Hi David,
What I have observed is, XI always reads files in a certain order (possibly alphabetical or reverse alphabetical). If it finds a file in the source directory that already exists in the archive directory, it will not attempt to read/process the next file (even if the next filename is completely new).
So, if any of the files in the source directory exist in the archive directory, there is a possibility that certain files may get processed and certain wont.
Make sure that none of the files that you put in source directory exist in the archive directory (i.e. all the files are new) and see the output. Let me know if this helps.
PS: I used FTP protocol
Regards,
Riyaz

How to ignore columns in CSV File with File Sender Adapter

Hi,
I have a CSV File that I need to load with XI. The File contains 10 columns but I only need the data from 3 columns, let's say column 1,4 and 7. Can I configure the XI File Sender Adapter in a way that it only loads the data for the required columns and ignores the rest?
Thanks in advance.
Alex

Alex,
Dont think so. Why not create Dummy fieldName for these columns you want to ignore.?
Regards
Bhavesh

Cant do a file get from external server using file sender adapter with ftp

Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
Mike

Thanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg /Folder/Subfolder the error message is as follows
EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg Folder/Subfolder a different error message is returned
Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike

Pick up a specific file with File Sender Adapter.

Hi guys,
I would like to know how I can pick a specific file in a file pool (folder)? I would like to choose this file by name, like FileA or FileB, etc.
Im asking this because I have an asynchronous file scenario (BPM) with a receiver adapter that put the File with a specific name (variable substitution) in a folder.
And I would like to do something like this:
In another asynchronous scenario (BPM), a File sender adapter picks up this specific file (using the name). The correlation is made trough an IDOC that XI receives before pick up the file, this IDOC has payload field with the name of file to be picked.
Is it possible receives the IDOC, read the field with the name of the file to be picked and choose this specific file? In a Sender File Adapter how I can do something like variable substitution like receiver adapter does.
Thanks in advance,
Ricardo.

Hi,
Is it possible receives the IDOC, read the field with the name of the file to be picked and choose this specific file? In a Sender File Adapter how I can do something like variable substitution like receiver adapter does.
No this is not possible. The only dynamic thing you can do is use wild card characters like *.
So, maybe you can pick a file like . or AA. and so on...
Regards,
Bhavesh

File sender adapter and content conversion with polish character

We are loading a csv file with PI 7.0 file sender adapter using "content conversion" - all fields go through EXCEPT a special character hex '208C' (space in front) looks like "Æ" is converted to hex 'C28C'.
We are using code page UTF8
We are using:
enclosuresign "
enclosuresignescape ""
fieldcontentformatting nothing
enclosureconversion NO
Hope some one can help

Hi Bohamo,
Hope you have set the following for your file sender adapter :
1. Transfer Mode is set to Binary,
2. File Type Text,
3. Encoding ISO-8859-1( for Western European Latin ).
Inorder to recognize Polish Character, try as follows :
Your sender file after coming into Pi has XML encoding declaration 'UTF-8'.
Write a simple XSLT mapping to change the value of the attribute "encoding" to "ISO-8859-1" in the output XML of message mapping . Include this XSLT map as the second mapping step in your interface mapping.
First step in your interface mapping will be your already existing message mapping.
An example of the XSL code :
<?xml version='1.0'?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method='xml' encoding='ISO-8859-1' />
<xsl:template match="/">
<xsl:copy-of select="*" />
</xsl:template>
</xsl:stylesheet>
or you can also do java mapping if you are comfortable with java code !
Cheers,
Ram.

Get filename from file sender adapter

Hi Experts,
I have a question regarding the file/ftp adapter (sender).
I have a directory with xml and pdf files. for every xml file there is a pdf file with the same filename. for example:
file1.xml
file1.pdf
file2.xml
file2.pdf
file3.xml
file3.pdf
Now I want to read the xml file with the file sender adapter. afterwards I want to read the related pdf file. for example: If I read the file file1.xml afterwards I want to read the pdf file file1.pdf with the file sender adapter. For this it is nessessary to get the filename from the xml file so that I can read afterwards the pdf file. How can I realise it?
Thanks and best regards
Christopher

Hi srinivas,
thanks for your quick answer.
That the file adapter is not able to read pdf files is clear to me. In this case I only want to transport the pdf. that works fine. I tested it.
the problem is the following:
I have a xml file with the name "file1.xml". I read the xml file with the sender file/ftp adapter configured with filename "*.xml". Then I want to import the pdf file with the name "file1.pdf". Therefor I need the filename from the xml file.do you know what I mean? So XI has to know the filename of the xml to import the pdf with the same name ...
regards

File sender adapter:FILE to IDOC without BPM, can't see in SXMB_MONI.

Hi all
I have a FILE - XI - IDOC Async scenario without BPM.
I configured FILE sender adapter and IDOC receiver adapter. I made a mapping to transfer file data to the structure of IDOC.
Now when i am trying to load the file using command prompt, i cud see nothing in the monitoring. Whereas if i go to the communication channel monitoring of runtime workbench, i saw that CC is polling correctly and was reading the file also.
And also wen i saw in the processed folder which i mentioned in the CC configuration for the ARCHIVE DIRECTORY, i saw that file got transferred to the folder also.
I don't understand why i cant see anything in the monitoring.
Could anybody help me to rectify the problem. Is there anything i m missing ?
Regards
Naina

Rajesh/Amar
TCode:: SXMB_ADM->Integration engine configuration->specific configuration->runtime
Trace_Level = 3 then you can get all MONI PIPELINE Steps also
I did this change but cudn't see anything in SXMB_MONI.
This is how i have configured my process:
http://wiki.sdn.sap.com/wiki/display/XI/FiletoMultipleIDOCSplittingwithoutBPM
But instead of IDOC splitting i have simple FILE - XI -IDOC scenario.
I have configured everything exaclty the same way it is mentioned here. But for me the process is not visible at all.
I can't even see the first request message in the monitoring.
This is the message i can see in the communication channel monitoring:
2010-05-24 09:07:41 Success Channel CC_*: Entire file content converted to XML format
2010-05-24 09:07:41 Warning Channel CC_*: Empty document found. Proceed without sending message
2010-05-24 09:07:41 Success File "/xyz/ABC.txt" archived after processing
Is there any problem with the file and that could be the reason it cant convert the file to the request message MT_REQUEST and thus am not able to see anything in monitoring.
help me guys....this is a simple process and i m stuck...its frustrating
Regards
Naina

Problem in File Sender Adapter in File with quotes

Similar Messages

Maybe you are looking for