Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

Hello All,
I have been trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
Below are the steps i have followed,
1.Deleted the setup tables using tcode-LBWG- Application-11
2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
3.Checked the data in RSA3-No data found.
4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
Do i need clear all the queues for SD-Billings,Orders e.t.c since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
Could you please suggest any other option to fillup the setup tables.
Regards,
Siva

Did you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
Regards,
AL

Similar Messages

Error while filling up the setup table for 2LIS_11_VAITM...

Hi
I am trying to fill the set up table for Application 11since i want to work on data Source enhancement = 2LIS_11_VAITM , but while performing fill set up, I am getting following error:
Error determining rate: foreign curr. INR local curr. USD date 07.01.2002 (doc. 7484)
Pls. let me know how can i exclude this document number in OLI7BW.
Pls. let me know if you have any reply on it.
Thank You....

Hi,
I think there is no option to exclude the documents from the selection. I have a small suggestion,not sure whether it works .There is a field 'No. tolerated faulty documents' .You can enter some no here and try that again. If still you get the problem, ask the functional consultant to correct the document.
Thanks

Problem while filling the Setup Table for the DS 2LIS_02_SCL.

Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.

Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

Taking long time filling the setup tables for sales and shipment

Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .

Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth

How to initialize the setup table for GTMuFF08Global Trade ManagementuFF09?

hi experts,
I can find the datasource of GTM like 2LIS_46_SCL, 2LIS_46_ITM with rsa6.
But when I use rsa3 to do test it, nothing found. I try to initialize the setup table, but I can not find it under SBIW.
Please help me, many thanks.
Brgds/steve

Hi
These Data Sources are from LOGISTICS Try at Tcode.LBWE --Logistics **** Pit.
Here is LO Cockpit Step By Step
LO EXTRACTION
- Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
       SD Sales BW
            Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
       Select the fields of your choice and continue
             Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
- Next step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 u2013 Sales & Distribution) and Execute
- Now, Fill the Setup tables
9). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Filling the Setup tables
vi. Application-Specific Setup of statistical data
vii. SD Sales Orders u2013 Perform Setup (T-Code OLI7BW)
        Specify a Run Name and time and Date (put future date)
             Execute
- Check the data in Setup tables at RSA3
- Replicate the DataSource
Use of setup tables:
You should fill the setup table in the R/3 system and extract the data to BW - the setup tables is in SBIW - after that you can do delta extractions by initialize the extractor.
Full loads are always taken from the setup tables
Hope it helps

Problem when filling Node and Item tables for the metho add_nodes_and_items

Hi Experts,
I am facing problem when filling Node and Item internal tables for the method add_nodes_and_items.
as i have written the below logic:
LOOP AT gt_partner INTO wa_partner.
    CLEAR lvs_tc_root.
    l_key = l_key + 1.
    lvs_tc_root-node_key   = l_key. "wa_partner-sndprn.
* lvs_tc_root-relatkey = lvf_tc_node_key.
* lvs_tc_root-relatship = cl_gui_column_tree=>relat_last_child.
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-isfolder   = 'X'.
    lvs_tc_root-n_image    = icon_folder.
    lvs_tc_root-exp_image = icon_folder.
    lvs_tc_root-expander   = 'X'.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key   = 'A'. "Successfull
    lvs_tc_root-relatkey   = l_key.
    lvs_tc_root-relatship = cl_gui_column_tree=>relat_last_child.
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-n_image    = icon_green_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key   = 'B'. "Errors
    lvs_tc_root-relatkey   = l_key    .
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-n_image    = icon_red_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key = 'C'. "Deleted
    lvs_tc_root-relatkey = l_key .
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden    = ' '.
    lvs_tc_root-disabled = ' '.
    lvs_tc_root-n_image   = icon_yellow_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
*   LOOP AT gt_partner_item INTO wa_partner_item WHERE sndprn = wa_partner-sndprn
    LOOP AT gt_partner INTO wa_partner_item WHERE sndprn = wa_partner-sndprn.
      CLEAR lvs_item.
      lvs_item-node_key   = l_key.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = wa_partner-sndprn.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'A'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Successful'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'B'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Errors'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'C'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Deleted'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
    ENDLOOP.
ENDLOOP.
CALL METHOD go_tree->add_nodes_and_items
    EXPORTING
      node_table                     = gvt_tc_node_table
      item_table                     = gvt_tc_item_table
      item_table_structure_name      = 'MTREEITM'
    EXCEPTIONS
      failed                         = 1
      cntl_system_error              = 3
      error_in_tables                = 4
      dp_error                       = 5
      table_structure_name_not_found = 6.
If the internal table has more than 1 record getting dump...Runtime Errors         MESSAGE_TYPE_X
Plase let me know how to overcome the problem..
Thanks,
Rajasekhar
Edited by: RajasekharReddy Nevali on Nov 29, 2010 3:43 PM
Edited by: Neil Gardiner on Nov 30, 2010 12:41 PM

Hi ,
U can undestand the code and one more thing dynamically display record for automcally here i am using root nodes please look at that one Same requiremtn i done previously.
cLEAR item.
item-node_key = c_nodekey-root.    "partner1
item-item_name = c_column-column1.
item-class = cl_gui_column_tree=>item_class_text.
item-alignment = cl_gui_column_tree=>align_at_top.
item-font = cl_gui_column_tree=>item_font_prop.
item-text = 'APPLICATION'.
item-length = 30.
APPEND item TO item_table.
DATA:lv_name TYPE tv_itmname VALUE '1',
       lv_nkey TYPE i,
       lv_nkey2 TYPE i,
       lv_nkey_c TYPE string,
       lv_nkey_c2 TYPE string,
       lv_nkey_c3 TYPE string,
       lv_nkey_c4 TYPE string,
       LV_NKEY_C5 TYPE STRING,
       lv_itmkey TYPE i,
       lv_itmkey_c TYPE string,
       LV_INDEX TYPE I.
************************************************LOOP FOR APPLICATION*********
LOOP AT i_otypes INTO wa_otypes.
    read table it_appl into wa_appl with key appl = wa_otypes-applic." BINARY SEARCH.
          if sy-subrc = 0.
            lv_apdes = wa_appl-text1.
          endif.
    CLEAR:item,lv_nkey_c.
    lv_nkey_c = sy-tabix.
    LV_INDEX = SY-TABIX.
    CONDENSE lv_nkey_c.
    CONCATENATE 'N' lv_nkey_c INTO lv_nkey_c.
    node-node_key = lv_nkey_c.
    node-relatkey = c_nodekey-root.
    node-relatship = cl_gui_list_tree=>relat_last_child.
    node-isfolder = 'X'.
    APPEND node TO node_table.
    CLEAR item.
    item-node_key = lv_nkey_c.
    item-item_name = c_column-column1.
    item-class = cl_gui_column_tree=>item_class_text.
    item-font = cl_gui_column_tree=>item_font_prop.
    item-text = wa_otypes-APPLIC.
    item-length = 30.
    APPEND item TO item_table.
     CLEAR item.
      item-node_key = lv_nkey_c.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_apdes.
      item-length = 30.
      APPEND item TO item_table.
     v_acount = v_acount + 1.
     v_acount1 = v_acount1 + 1.
clear lv_apdes.
*****************************************LOOP FOR ARCHIV OBJECTS***************************
    loop at it_obj into wa_obj where applic = wa_otypes-applic.
      CLEAR:item,lv_nkey_c2.
      lv_nkey_c2 = SY-TABIX.
      CONDENSE lv_nkey_c2.
      CONCATENATE 'SN' lv_nkey_c2 INTO lv_nkey_c2.
      node-node_key = lv_nkey_c2.
      node-relatkey = lv_nkey_c.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c2.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_obj-object.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c2.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_obj-objtext.
      item-length = 30.
      APPEND item TO item_table.
****count all object for final displaying*******
     v_ocount1 = v_ocount1 + 1.
      LV_STR = LV_STR + 1.
     ENDLOOP.
*********************LOOP FOR ARCH OBJECT ALL PROGRAMS*******************************************
   LOOP AT IT_PRG INTO WA_PRG WHERE OBJECT = WA_OBJ-OBJECT.
****************1PRG**********************
IF wa_PRG-REORGA_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-reorga_prg BINARY SEARCH.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item,lv_nkey_c3.
      data : v_no type sy-tabix.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'WRIT'."wa_PRG-REORGA_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'WRITE PROGRAM'."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
       clear lv_text.
************************SSSN NODE***********************
        CLEAR:item,lv_nkey_c4.
      data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      CONDENSE lv_nkey_c4.
      CONCATENATE 'SSSN' lv_nkey_c4 INTO lv_nkey_c4.
      node-node_key = lv_nkey_c4.
      node-relatkey = lv_nkey_c3.
      node-relatship = cl_gui_list_tree=>relat_last_child.
     node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_PRG-REORGA_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
        clear lv_text.
*******COUNT TYPE WRITE PROGRAMS****************
      V_WCOUNT = V_WCOUNT + 1.
CLEAR item.
V_WCOUNT = V_WCOUNT.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column3.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = V_WCOUNT."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR V_WCOUNT.
ENDIF.
*endif.
*****************2PRG*****************
IF wa_PRG-RETRIE_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-retrie_prg.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item, NODE, lv_nkey_c3.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'successful'."wa_PRG-RETRIE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'sucessful PROGRAM'.
      item-length = 60.
      APPEND item TO item_table.
*********************************SSSN NODE*******************************
       CLEAR:item,lv_nkey_c4,node.
     data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      CONDENSE lv_nkey_c4.
      CONCATENATE 'SSSN' lv_nkey_c4 INTO lv_nkey_c4.
      node-node_key = lv_nkey_c4.
      node-relatkey = lv_nkey_c3.
      node-relatship = cl_gui_list_tree=>relat_last_child.
     node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_PRG-RETRIE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
        clear lv_text.
**********COUNT THE RELOADPR*******************
          V_WCOUNT = V_WCOUNT + 1.
CLEAR item.
V_WCOUNT = V_WCOUNT.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column3.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = V_WCOUNT."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR V_WCOUNT.
ENDIF.
ENDIF.
****************3PRG**********************
IF wa_PRG-DELETE_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-delete_prg.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item, NODE, lv_nkey_c3.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'DELETE'."wa_PRG-DELETE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'NAME OF DELETE PROGRAM'.
      item-length = 60.
      APPEND item TO item_table.
       CLEAR:item,lv_nkey_c4,node.
     data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      endloop.

Table for List of Active Data Sources

Hello All,
I have a requirement like, to collect List of Active Data Sources from which extractions are happening for the past one year.
Actually i have many Data sources which are in Active State but extractions are happening only on some of the Active Data Sources.
I can collect List of Active Data Sources from Table RSOLTPSOURCE, but how to collect Active Data Sources from which extractions are happening for the past one year.
Is there any such table which satisfies my requirement?
Thanks in Advance!!

Hi Srikanth,
I had similar kind of requirement in my project and I used following approach,
1) We already had a list of all the process chains which extract data from source system. So you also need to get such list if you don't have then goto RSPCLOGCHAIN and get the list of all the active chains.
2)after that goto table RSPCCHAIN and for all of your chains or for a single chain you can put the TYPE as "loading" and you will get list of all the infopackage.
3) Once you get the list of all the infopackages which are loading data from your source system.
4) goto table RSLDPIO and put all your infopackage name and source system you will get the list of all the datasources in OLTPSOURCE field.
Regards,
Durgesh.

How to change the safety interval for 0FG_DO01- Special ledger data source

Gurus,
Is there a way to change the safety interval for SAP Standard Data source 0FG_DO01(safety Inteval).
I am only able to display it in RSA2 and not change.
Appreciate your immediate assistance.
Thanks,
Ravi Aananthuni

You can view it in RSA2. However you may need to update table ROOSOURCE to change the value of safety interval upper and lower limits.
Thanks,
Ravi ananthuni

Extraction Problem- while filling the setup table

Hi all,
I have a problem when i fill the setup table for LO cockpit Extraction on any SD datasources (2_LIS_VAHDR,2lis_13_vdkon etc.,). i am done with LBWQ successfully. i also verified the datasources in RSA6. They are in active status in RSA7-delta queue.
After i submit the request to fill the setup table, i am getting
"datasource 2_LIS_VAHDR contains data still to be transferred". if i check the extract checker (RSA3) i am getting the error msg "data source is not defined in the source system"
Can anybody help me on this?
one of my friend suggested that it could be the reason that some jobs are in active status that loads/updates data into base tables which the datasources refers.
Any idea on the reason and resolutions?
Greatly appreciated !

Hi Vijaya,
We too got the same Error : " the datasources are not defined in the source system".
This is source system connection problem. Check whether connection between R/3 and BW is active.
This error occurs when the connection is inactive.
Also, if it is copy client, then check data exists in other client. If so delete the setup tables data in that client as well.
This will resolve your issue.
Thanks
Edited by: Allen Fyne on Aug 9, 2008 6:47 PM

What is the transaction to fill Setup tables for 2LIS_08TRFKZ

Hello Friends,
I am using OLI8BW setup table transaction for 2LIS_08TRFKZ extractor. Is this transaction correct? Its not just working.
Thanks
Simmi

why don't you go through the menu if you're not sure about the transaction code?
SBIW > Settings for Application-Specific DataSources > Logistics > Managing Extract Structures > Initialization > Filling in the Setup Table > Application-Specific Setup of Statistical Data > LES - Shipment Costs - Carry Out Restructure
then launch it and follow menu
System > Status
it will tell you the transaction code (= VIFBW)

Error while filling setup table for 2LIS_03_BF

Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.

Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya

Problem with populating setup tables for purchasing

I'm working on NW2004s.
Problem: Setup tables are not getting populated for 2lis_02_hdr, 2lis_02_item..
what all i've done so far:
1. Activated Data Sources in RSA5.
2. In LO Data Extraction, all the extract structure are active. (btw in job control i'm not sure what it does, i did make job parameter start date immediate, didnt set the print parms, schedule job gives an error.. anything here i may be messing it up?)
3. In SBIW initialization Deleted the contents of setup table and executed the 'Purchasing - perform setup'.
4. In NPRT i can see the log, the name of the source table EKKO, duration of run is 0.0 and no of docs 130.
5. In RSA3 for 2lis_02_hdr extraction process 0 records.
6. I look at SE11 for 'MC02M_0HDRSETUP' and table contents gives 0 records.
Any help is appreciated what i'm missing why the setup tables are not populating. I went thru the forum and did what was said but no sucess yet. I'm not an expert in SAP BW just been working for a year so pl dont be cryptic, explain u'r answers. Thanks for your time
Mayil

Hi,
All the active datasources will be available in RSA6, after that go to LBWE ,maintain Ex Stru, Maintain DS and make that active, then we go for statistical setup
have you done these things?
Did you put any filters while filling up the setup tables?
what is the transaction you used for Setup.
cheers
RK

How to Fill Setup tables for MAP (IS- Retail)

Hello,
I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
2LIS_40_REVAL
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208
Your reply is highly appreciated.
Regards,
Naresh

Hi Naresh,
We cannot fill setup tables for each data source.
ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
If you want setup tables names of your data sources please check below.
2LIS_40_REVAL --- MC40RP0REVSETUP.
Comes to your second post.
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208 these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
If you are using LO data sources then no need to use LIS data sources.
Regards,
Venkatesh

Transaction to fill setup table for 2LIS_18_I3HDR

Hi
What is the transaction code for filling up the setup table in R/3 for 2LIS_18_I3HDR?
Kind regards,
Torben

hi,
Navigate like this sbiw-> Application specifcic data sources-> Logistics->
iniitlization-> perform the execute set up for the relevant application.
I wanted to know whether it is lo data source or not
regards
Message was edited by:
Shahid Syed

Trying to fill setup table for 2LIS_04_P_ARBPL

Hi
I am trying to delete and fill setup tables for 2LIS_04_P_ARBPL. I go to SBIW, delete setup tables for application component 04 and then go back to fill setup tables. But I get the message "DataSource 2LIS_04_P_ARBPL contains data still to be transferred".
Am I missing a step?
Thanks
Pooja

I went to transaction SBIW ->Settings for Application specific datasources ->Logistics->Initialization->Delete contents of setup tables-> Application 04
Then under Initialization I went to Filling in the Setup table->Application specific setup of statistical table ->Production.
I entered the date & time (and entered my own Run name. Should I say new run or rerun or give my own Run name?) and executed the transaction.
Then I got the message - datasource still contains data to be transferred.
Thanks!

Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

Similar Messages

Maybe you are looking for