Problem in filtering the detailed report

Hello All,
I am having scenario where i need to jump from xcelsius to BW web report for details and i want this web report to be filtered by plant value .I have created the flash variable i have referenced the input value to the palnt cell in dashboard excel sheet. when i run the dashboard i am getting filtered out put in dashboard but in the detail web report i am getting all values and filter has no effect.
can anybody please help me regarding this?
Thank You very much

If you create a multiprovider with the two ODS you wont have this problem.
Hope it helps.
Regards.

Similar Messages

There is a problem connectiong to the specified reporting Server SCCM 2012 SSRS

hi,
I'm Trying to install reporting services point SCCM 2012, I configured the
site system role without problems, but when I tried to configure the report options I get this error:
"There is a problem connectiong to the specified reporting, please check the conection and make sure SQL Reporting Service is running on the especified server. "
The reporting service is running on remote server, I'm using SQL SERVER 2008.
Two Questions:
1: Which is the cause of the error?
2: Which right permissions must have the reporting services point account?
Thanks.

Are you allowing port 1433 through the firewall?
Which release of SQL Server are you using and have you applied the relevant minimum CU? Details here
http://sccmentor.wordpress.com/2013/12/31/sql-server-site-database-configuration/
Which version of SRS is installed? If 10.50.1600.1 you will need to get this updated to above 2500 level.
http://www.mssccmfaq.de/2012/05/15/srs-not-detected-as-running/
Cheers
Paul | sccmentor.wordpress.com

Unable to open the detail report in the same page/window

When i use the "Navigate to Web Page" action link to navigate to the detail report, the detail report is opening in new window. Is there any way that the detail report can be opened in the same page/window.

Hi,
why don't you use the master/detail table option when dragging the master VO ?
Frank

Summary and the Detail Report

Hi All,
I want to create a summary and detail report in two different layouts on one single report,based the input summary or the detail report shoud execute...,how to do the same.
Thanks in advance
C.Somasundaram

Hi,
bring your two different layouts in seperate frames and write format triggers on this frames to show or suppress them (depending on your input). Connect the two frames with an collabsing anchor.
Regards
Rainer

Problem in designing the complex report for the client requirement

Post Author: venkateshvarakala
CA Forum: General
Hi,
I have problem in designing the report (Crystal Report 9.0) with multiple groups wih a sub report in each group with a a group header and footer with a
detail section in each report.
My requirement is as follows.1) Xxxx-sub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter2) Yyyyysub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter3) Zzzzzsub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter4)ABCdsub reportwill have one header one footer in group headers grouper on two prameters, My requirement demands customised detail section i.e.static conetent followed by detail section and a static conetnt(which should not repeat with child table records,should come only once with the a record and
s) and detail section.
example:
main table of the sub report 4 has records m1,m2,m3,m4... and child table has
m1c1m,m1c2,m1c3,m1c4,m2c1,m2c2,m2c3,m2c4,m3c1,m3c2,m3c3,m3c4,m4c1,m4c2,m4c3,m4c4...
The staic content should come only with m1,m2,m3,m4 not with m1c1,m1c2....like this I need in two places in the same report which may have 500 recors printed in single report.
all the above section should be suppressable with a condition including the top 3 reports.
I am able to get the top 3 reports as per the requirement but my forth sub report is getting displayed after each sub-group 1,2,3 which is not happening with
1,2,3. Only 4th set is repeating with 1,2,3.
THis report is attached with 6 datasets.
I linked the main report main table with 1,2,3 (main Table) report filling table but when I am trying to link the 4th table main table I am able to link but
I am not getting the result on the report.All the dataset has the one common column. sub report 1,2,3 are filled with common datasets with condition suppressing where as 4th report is filled with
different results .
1) My question is why the 4 the report is report is repeating with 1,2,3 why 1,2,3 are coming as expected.2) Is it possible to create
Please help me in designing the report as per the requiremnt and suggest me if I need any design modifictions.
Your suggestions and inputs are highy appreciated.Thanks for sparing time in going through my problem and I will be grateful if give solution and share if you have similar experiences.
Thanks
Venkatesh Varakala.

If you create a multiprovider with the two ODS you wont have this problem.
Hope it helps.
Regards.

Problem while running the xml report in concurrent program

Hi,
In EBS r12, we have requirement to have a standard report output in excel.
I got the report's xml output to create the xml template (.RTF layout) using BI Publisher.
I created the .RTF layout and it works fine on my laptop using Bi Publisher.. the xml loads into it and i can preview xml data on layout with all format (Excel, PDF...)
I uploaded the layout to EBS, and assigned it to the standard report.
I changed standard report out put to XML
When i go to submit report request, the template is assigned with report and everything seems correct.
But after i run the report.
The report is Completed with Warning status.. and output is only XML with Error message :
This XML file does not appear to have any style information associated with it. The document tree is shown below.
The Log file says :
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 2350601 on node CLONE at 13-APR-2011 09:03:47.
Post-processing of request 2350601 failed at 13-APR-2011 09:03:48 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
The manager log file of Output post processor shows as:
Template code: LATE_PAID
Template app: SQLAP
Language: en
Territory: 00
Output type: EXCEL
[9/21/11 10:59:39 AM] [UNEXPECTED] [1273372:RT4463274] java.io.FileNotFoundException: /data1/EBSR120/inst/apps/oravis_hschbscgn20076/logs/appl/conc/out/o4463274.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:230)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:166)
[9/21/11 10:59:39 AM] [1273372:RT4463274] Completed post-processing actions for request 4463274.
[9/21/11 11:33:17 AM] [OPPServiceThread0] Post-processing request 4463327.
[9/21/11 11:33:17 AM] [1273372:RT4463327] Executing post-processing actions for request 4463327.
[9/21/11 11:33:17 AM] [1273372:RT4463327] Starting XML Publisher post-processing action.
[9/21/11 11:33:17 AM] [1273372:RT4463327]

I guess we should submit XML publisher request "XDOREPPB" in "After report trigger" to generate the report output. You can refer the below link for syntax for submission of the program.
Re: Excel Output appears in IE after submitting XDOREPPB from backend
This may be helpful if not please ignore it.

Problem in seeing the details in Monitor of Infopackage......

Hi,
I am doing INIT without data transfer.
When I go in monitor and try to see the details I not able to see any thing , its not displaying any of the TABS of monitor like Hedear , Status and Details.
When I go to data target and try to open from again it dont displays anything.
Can anybody let me know if have faced similar problem?
Thanks , Jeetu

Hi Jeetu,
Please can U check the Scheduling options inthe Infopackage screen, plz ensure that the job has been scheduled either immediately or to a specific time period.
If it was a immediate run, plz check the job status in SM37 for both source system and BW. If the job has ran successfully then you should get some logs for that, U will not find logs unless until the job hasn't ran (or) started.
Hope this should help U.
Regards,
Syed

Problem in saving the details of 0590 infotype...

Hi Experts,
When im trying to save the longterm reimbursement amount
in 590 infotype itis howing the error message that """Hard furnishing scheme is not available for the employee number ** on 01.04.2007"""
What could be the problem.Where should we change the details....
Please advice.
Regards,
V ram.

Hai.
Pls check 40LTR feature.
The feature 40LTR is configured to default the end date for long term
reimbursements infotype (0590). The defaulted end date for the infotype
could be begin date dependent or a fixed end date. The validity period of
the reimbursement is the block of years specified in the feature. The
configuration can be done for the sub types of the infotype like HFS-
Hard furnishing scheme or SFS- Other reimbursements. The block of years
and fixed end date are separated by a forward slash in the respective
order.
I doubt u didnt configure this feature... for Hard furnishing scheme...
Edited by: Ram Manohar on Mar 25, 2008 5:20 PM

Problem to run the Crystal report inside from SAP B1 based on SQL views.

Hello,
I have a problem to run my Crystal report inside from SAP B1 which is based on SQL views.And the SQL views are stored in a separate database in SQL server.The error which i am getting is saying the the tablename does not exist.What i need to do in order to sort this problem.
Great if somebody can help me to sort out this so that i can run my report based on SQL views stored on separate database other than SAP databases inside from SAP B1.
Edited by: rozenagrawal on Apr 19, 2011 11:51 AM

Try using a SQL synonym in your company database for the views outside the company database. I don't know if SBO will let you get away with it, but its worth a shot.
If your company database is MyCompany and you have a view called MyView in Views database, assuming the view belongs to schema dbo, and you want the synonym to belong to dbo schema in your company database, run this:
Use MyCompany
go
create synonym dbo.OutsiderView for
Views.dbo.MyView
go
select * from OutsiderView
The select statement should return the contents of MyView in the Views database while you are connected to your MyCompany database.
For more info, see the Books Online for MSSQL on topic synonym.
You will need to change your CR options to include displaying synonyms along with tables, views, etc. You may also need to grant select to B1 users.
Edited by: Cindy Lange on Apr 21, 2011 4:00 PM

Problem navigate from the "detailed navigation"

Hi ,
I created a role that include workset.
the pages of the workset are being displayed in the "detailed navigation" area .
when i navigate from "a" to "b" in the ""detailed navigation"...i have 2 problems :
1. sometimes i see the portal logon page .
2. it navigate back to the entry point of the first displayed role .
Any ideas how to solve this problem ???
Thanks Faniel.

If your portal is abc.foo.bar.com:5000 and your iView tries to access content in abc:50000, then you might be prompted to logon again.
Are the WD applications running on the same instance as the portal, or are they running on a different instance?
What is the cookie lifteime?
Cheers

Problem in filtering the records in Query

Dear Gurus,
I am struck with a problem of filtering data and am not able to visualize the solution so need a solution.
so here is the requirement:
I have a multiprovider with 3 infocubes.
All these infocubes have a dimension names product family and in it there is a infoobject named FAMILY & it is having a attribute named DATE and DATE attribute is not a navigational attribute of FAMILY.
Example:
family : A
attribute date: #
for period: 011.2010
family : A
attribute date: #
for period: 012.2010
family : A
attribute date:01.01.2011
for period: 001.2011
family : A
attribute date: #
for period: 002.2011
if user run the query in 012.2010 i mean december 2010 then the above two record should be displayed & if he run the query in jan 2011 then only jan record should be shown because there a date in it & old record should not come. again if he run the query in feb 2011 then only the records for jan and feb should come old record before the date should not come.
I mean once the value show up in the attribute date it should not pick old values but only pick new values.
Thanks to all!

Hi Mario,
When I format date as DSTR(@date_from & : &@date_to, 'dd.mm.yyyy') it shows blank values in the output for date field. rest of the values are displayed.
Mario can you tell anything about second part of my question. I am getting 'Result' at output.

I HAVE ENCOUNTERED A PROBLEM IN MODIFYING THE DEPARTMENTS REPORT

I am a new learner database developer. I am now using Oracle 11g. Following the Developer tutorial on MODIFYING THE DEPARTMENTS REPORT I have encountered the following problem.
Scroll down to Source, and replace the default Region Source script with the
following:
SELECT d.DEPARTMENT_ID,
d.DEPARTMENT_NAME,
(select count(*)from oehr_employees where department_id = d.department_id)
"Number of Employees",
substr(e.first_name,1,1)||'.'||e.last_name "Manager Name",
c.COUNTRY_NAME "Location"
FROM OEHR_DEPARTMENTS d,
OEHR_EMPLOYEES e,
OEHR_LOCATIONS l,
OEHR_COUNTRIES c
WHERE d.LOCATION_ID=l.LOCATION_ID
AND l.COUNTRY_ID=c.COUNTRY_ID
AND d.DEPARTMENT_ID=e.department_id
AND d.manager_id=e.employee_id
AND instr(upper(d.department_name),upper(nvl(:P2_REPORT_
SEARCH,d.department_name)))>0
6. Click Apply Changes.
7. Click Apply Changes to confirm.
8. Right-click Departments and select Edit Report Attributes.
9. Click the Edit icon next to Number of Employees.
10. Under Column Definition, select center for Column Alignment.
11. Click Apply Changes.
When I did it there was an error message as follows:
ErrorRegion Source
Query cannot be parsed, please check the syntax of your query. (ORA-00909: invalid number of arguments)+
Unable to show report.
Below is the syntax that was to be replaced:
select
"DEPARTMENT_ID",
"DEPARTMENT_NAME",
"MANAGER_ID",
"LOCATION_ID"
from "OEHR_DEPARTMENTS"
Now; how should I correct it? I cannot move forward
Regards
DAVID GODIS-TEI
Ghana

In your post, the bind variable :P2_REPORT_SEARCH has a carriage return before the word SEARCH. Make sure this is not the case in the report.

Problem while opening the BI reports in Portal Favourites

Hi All,
While trying to add a BI report in Portal Favourites, I am able to add the reports in portal favourites but when I click the reports(inside Portal Favourites) to open it , it will not open the reports but opens the very first page of the portal which we get after login to portal.
Please tell me how can I open the respective reports which I added in portal favourites.
Thanks,
Sourabh

Doesnt seem to appear as a portal issue neither it is a reader issue. Might be some issues with the network which isnt allowing the entire file to get downloaded and hence causing the browser to hang.
Thanks,
GLM

Problem when dowloading the ALV report output to Excel Sheet.

Hi ,
I am dowloading the ALV report output to Excel Sheet.
There is field Condition Unit(KOMP-KMEIN) in the output of the ALV, this has values PC and CSE , but when I download to Excel Sheet, CSE is appearing as CSE ,but PC is appearing as ******.
Can you please help me in knowing the reson for this.
Regards,
Madhu.

hi
refer to following link
http://www.****************/Tutorials/ALV/ColorSALV/Demo.htm
http://www.sap-img.com/abap/download-to-excel-with-format-border-color-cell-etc.htm
Cheers
Snehi
Edited by: snehi chouhan on Jul 11, 2008 12:42 PM

Performance problem with Filters of Crystal Report

Hi,
I have been facing this problem for a month now.
Whenever I try to run a Crystal Report from Infoview it takes 5min or more to get the prompts screen
but sometimes(mostly when i restart all servers) the filter screen appears real quick say 5 to 10 secs(is this quick?)
I have no idea why this is happening! Is there an issue with the servers? or is this problem related to Crystal report?
Please help. I tried googling for this problem but could not find anything that would help.
Thanks
Nilesh

I am using a universe which uses a DSN to connect to the sql2k5 database. One thing I forgot to mention is that this is a clustered environment(with 2 servers) and the input/output file repository is set to a folder on a third server.
Note: Even though the report filters take time to pop up, but the report runs very fast; doesnt take more than 5 seconds for a fairly complex report.
Yesterday I did a trial install on a seperate server and the reports filters come up pretty fast.

Problem in filtering the detailed report

Similar Messages

Maybe you are looking for