Problem in finding the Communication channels under configuration

helo all.
i want to look at communication channels under cd1 (businness system)but i couldnt found.
but when i take a look at these through my neighboous systems i did find those.
can any body tell me wat would be the story behind this and do i need to have any settings under my system in XI.
waiitng for u r response.
bye.
regards.
seeta ram.

Hi,
If the objects are activated then u must be able to see it. Have u checked in the objects tab...where all the CC are listed under their respective business systems. Are you trying with ur user id in ur colleagues comp or their user id..?? Try to refresh the cache.
Thanks!!

Similar Messages

How to find which communication channel is picking the file

Hi
Can any one tell me, how can i find which communication channel is picking the file from the source directory?
I have a file scenario. File is coming to directory but it disappears even after I STOP the communication channel, I am using for this scenario
I want to find out which communication channel is picking the file.
How can i do it?

Hi,
you can try this:
Go to Communication Channel monitoring in Runtime Workbench.
Select all file adapters and check cluster node for each Channel. If the file is picked by the channel you will see processing details or errors related to channel here.
Since as you say the message is not seen in sxmb_moni then the communicaition channel would be red. Files that are picked from directories but not visible in sxmb_moni are usually in error at channel level.
Hope this helps.
Regards,

Error when trying to change the communication channel

Hi SapAll.
under the Integration Directory ,when i try to change the Descryption of communication channel and save it ,it is raising the unknown error which i cont uderstand at all as it is complaining about the other operation mapping which is using this comm channel in its process Integration scenario.
one thing i cont understand is y it is complaining about the other operation mappings which the communication channel is not at all related to ot.
the following below is the error that iam getting while changing the descryption of communication channel and saving it
Attempt to access the 1 requested objects on 1 failed. Detailed information: com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Operation Mapping ECC_ApprovedOrdersQuery_ApprovedOrdersRead_to_TRADESTONE_ServiceHandlerService_ApprovedOrdersRead | urn:sap.shoprite.co.za:ecc:pa, type MAPPING from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Operation Mapping ECC_ApprovedOrdersQuery_ApprovedOrdersRead_to_TRADESTONE_ServiceHandlerService_ApprovedOrdersRead | urn:sap.shoprite.co.za:ecc:pa not found
Attempt to access the 1 requested objects on 1 failed.
Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException:
Attempt to read object Operation Mapping ECC_ApprovedOrdersQuery_ApprovedOrdersRead_to_TRADESTONE_ServiceHandlerService_ApprovedOrdersRead
| urn:sap.shoprite.co.za:ecc:pa, type MAPPING from
application REPOSITORY on system REPOSITORY failed.
Object does not exist. Detailed informatio n: Object
Operation Mapping ECC_ApprovedOrdersQuery_ApprovedOrdersRead_to_TRADESTONE_ServiceHandlerService_ApprovedOrdersRead
| urn:sap.shoprite.co.za:ecc:pa not found (ROA_MOA_NOTCOMPLETED)
will be waiting for your response.
regards.
Varma

the problem is sorted.
my colleague has got incorrect objects in the scenario which is using the same communication channel,so she just deleted all the objects in that scenario under configuration .
now i can change and save,activate the communication channel after my colleague deleted the objects of the scenario.
regards.
Varma

How to set up the communication channel for third party idoc

Hello,
I am trying to send an idoc from an sap 4.6c system to an third party system. The third party system is supporting idcos with trfc.
My problem is to set up the communication channel in the integration builder (configuration) for the third party system. The idoc is waitung in XI to transport.
My settings are:
adapter type: idoc
transport protocol: idoc
message protocol: idoc
adapter engine: integration engine
rfc destination: xyz (is working fine)
interface version: sap release 4.0 or higher
port: ??
sap release 46c
My problem is the port. should i set up a port in idx1? But the third party is not an sap system and so i dont have a client.
On the xi i have defined a port in transaction we21 (transactional rfc) for the third party with my rfc destination xyz. But if i enter that port in communication channel i got error messages.
Thanks for any help.

Hi Christian,
yes, you have to mainztain that port in idx1.
First ypi load the rfc-metadata from an SAP referenzsystem and afterwards copy this metadata to the third party port.
For further details check the onlinedocumentation "IDoc Processing with the IDoc Adapter" XI -> runtime -> adapter
Good luck,
Holger

The Communications Channel based in JDBC Adapter in order to Receive

We have a several communication channel based in jdbc adapter connecting to Oracle database in order to receive information from our R3 System, but now is not working i do not see any message error in our XI, i see that the message was succefull procesed but when you see the oracle database is empty. When you see the jdbc adapter in the runtime workbench i see only this message
"Receiver Adapter v2112 for Party '', Service 'SIOPRO':
Configured at 16:12:31 2006-07-18
Up and running - no message processing until now"
Somebody know what is happening?

Is the message monitoring is showing success ? If there is no error in SXMB_MONI, Message Monitoring->Audit Log (i.e
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp ), then I think, it is unable to find the Adapter channel.
Anyway try to restart the Adapter engine. It may help you.
Regards,
Moorthy

The report options under "configure" and CSV or xls.

The report options under “configure” does not give .csv or xls as options. Instead of using vi to pass data to database, is there a simple way to transfer all the results (just like the way in the report that automatically generated) to .csv or xls...
Thanks.

Hi,
in order to modify the report generation, you have to understand the way how TestStand works in regard of the report generation.
There is a tutorial which explains this which you can find here. But please note that the tutorial is currently undergoing an improvement process.
The reason that the report options don't give you the option for xls or csv as report is:
Neither xls nor csv are predefined. So for example measurement values in xls can be placed in a special worksheet or included in a main sheet in a certain column.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Error in generating the communication channel

Hi All,
I am getting the following error while trying to configure the business scenario using the Integration Directory.
Attempt to create object failed
Unable to generate the communication channel (XI_Test_Sender_BS, XI_Sender_BS): com.sap.aii.utilxi.misc.api.ClientServerException
Here I am trying send a message from a third party system to an SAP R/3.I had selected the adapter type as File adapter on the sender side and Idoc adapter on the receiver side.While configuring using the Configuration Wizard, the error mentioned above is generated.
Please help me.
Thanks and Regards,
Soumya.

HI Rajesh,
Thanks for quick reply...
My requirement was to idetify the order number in table which i have generated a sequence to be unique in DB.
Do we have any option to process a single file at a time from the sender location instead of multiple files...i can see processing sequence <bydate> option in nfs but not in FTP.
Please suggest....
Thanks in advance,
naveen

Problem in creating new communication channel template in IR

Hi experts,
I currently have problems with creating new communication channel template in Integration Repository. If I choose the New-Context (Adapter Objects-->Communication Channel Template) the dialog "CREATE OBJECT" is shown. After I have inserted the Name of my template I push the create button.
Then the following error occurs:
STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED).
So can anybody help me. Thanks for your help.
Best regards.
Mario

Hi Mario,
            This is genral problem appearing in PI 7.0 with SP12.
            Previously, i have the same problem.
            i.e STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED)
            Regarding this we raise an OSS note SAP people.
            they gave the suggestion that update with SP13.
          i discuss with basis team and install the SP13.
           now the problem is solved, i can able to create the Communication Channel Template.
Please award points, if it really help to u
Regards
Mahesh.

Channels not monitorable in the Communication Channel Monitor / RWB

Hi,
Back on XI after a long break ☺
I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
Status: NA
Short Log: No adapter registered for this channel
The adapter is deployed and the integration scenarios using it work perfectly:
- sda package deployed through the SDM
- the metadata defined in the Design
- a valid and working configuration involving the scenario is defined
The messages are going through and are monitorable in both SXMB_MONI and RWB...
All other channels using system adapters (File, RFC, SOAP) do display a status (as a color icon) and a Short Log and they can be administered (start/stop) using the enabled buttons when selected
From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
I have no idea what could be the issue should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
I saw 2 posts with this error message but they did not help me to figure out where the issue is
Thanks for your help,
Adalbert
Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

Hi Gouri,
Thanks for your response, I will try would suggestion for testing... but
I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
I did not see anything in the Adapter Development guides related to this kind of constraints...
Thanks,
Adalbert

Start and stop the Communication channel from Java Mapping

How to start and stop the Communication channel from Java Mapping in XI 3.0
Scenario PI - > MQ -> Third Party web application
Web application is down and then Communication channels are stop manually .
We need to automate this process,
MQ Solution - Trigger will be set in MQ which will be called when web application is stopped
Trigger will send u201CSTOP u201C message to PI
How to configure PI scenario to stop different com channels when this message received ?

check this link: http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/frameset.htm
make sure that MQ send http request to PI. i dont think a configuration scenario is required in PI. Only roles should be enabled with proper user provided to MQ team.
However, for security reasons, you can configure a scenario if you dont want to expose PI infrastructure directly to 3rd parties.

Shut down the communication channel query

Hi Experts,
I wanted to know answers to the following
1) Is there any limit on the number of messages that can pile up in the adapter engine if we shut down (Deactivate the communication channels)?
2) When we reopen the communication channels later, will the messages be processed in the same order they have arrived?
Regards,
Ravi Kanth Talagana

>
Ravi Kanth Talagana wrote:
> Hi Experts,
> I wanted to know answers to the following
>
> 1) Is there any limit on the number of messages that can pile up in the adapter engine if we shut down (Deactivate the communication channels)?
completely depends on your server configuration (h/w)
> 2) When we reopen the communication channels later, will the messages be processed in the same order they have arrived?
>
> Regards,
> Ravi Kanth Talagana
once they are reopen you will have to manually resend them and again if they are EOIO configured then the sequence will be maintained.

Unable to find the JMS adapter under deployments

Hi,
I am using weblogic 10.3.6.0. I want to develop JMS error queue in BPEL. Before that i have to do some configuration like create jms module, select SOA and admin server for deployment,..etc.
finally i have to update the JMS adapter for deployement under deployment tab.But i am not able to find the JMS adapter under deployment tab list. So please provide me useful information , how
to install JMS adapter into Deployments.
Your valuable suggestion is more appreciable.
regards
Narsi.

Hi Priya,
There are some articles on SDN to show images/attachments in laptop application. You can check them out.
http://wiki.sdn.sap.com/wiki/display/mobile/UploadingAttachments-NetweaverMobile7.1
http://wiki.sdn.sap.com/wiki/display/mobile/CreateapplicationsusingBinaryMemoandTextMemoinNetweaverMobile+7.1
Also the path is for NWDS, at client you need to go thry program files path & then mobile apps & then the DC -> component.....
Reg,
Nipun
Edited by: Nipun Dev on Sep 22, 2010 11:12 AM

Calling specific put/get commands from the communication channel

Hello,
I need to execute a specific command to place or read the file from the bank file server.
The command for placing the file is something like this -
put localfilename %localfilename%SECUPGPENA%GPEXRIP%%B
I am trying to use the following command in the "Run Operating System Command Before Message Processing" section of the communication channel
"put %F %%F%SECUPGPENA%GPEXRIP%%B"
But the files are not being transferred.
I believe that I need to replace the actual message processing command by the given command by writing a script and calling it.
Please give me any pointers for solving the issue.
Regards,
Mayank

Hello,
Thanks for your response.
I have already gone through the above blogs.
The issue is that I need to replace the actual command used in the file transfer with the given put command.
Please let me know if there is a workaround for it.
Regards,
Mayank

I have pse 12 - in organizer I cant find the rating stars under thmb nails. enlarging doesnt help.??

I Have PSE 12- Cant find the rating stars under my imported thmb nails. I have tried enlarging the thmb nails but no good. Thanks for reading this question / ???

Shortcut Ctrl D.
Or menu View / Detail.

Regarding the Communication channel options

Hi guys,
In the Communication channel We have an option in the File processing parametrs that is File construction mode Here i gave Append, every time the output is appended to the current file, but my requirement is i want to append the data on the date wise, means today(29/08/08) i want only one file, tomorrow(30/08/08) ill get only one file,...
How to achieve this, how we will give the date in the CC ?

Hi,
Rather than using the variable substution use this.
1. Create a UDF with two input a,b with the following code.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String fname = "file" + a + ".xml";
conf.put(key, fname);
return "b";
2. Map the CurrentDate function with transformDate and with the UDF as input a and any other mandatory field as another input b map the out put of the UDF to the required filed.
3. In the TransformDate function use the Source date format as yyyy/MM/dd and target date format as yyyyMMdd.
note: mapping any source field with b input via UDF to the target field ensures that the UDF is always executed and sets the file name with the current date.
Thanks
SaNv...

Problem in finding the Communication channels under configuration

Similar Messages

Maybe you are looking for