Problem in getting smart view

hi , there
i have installed the smart view of hyperion system 9.3 on excell 2007 , but i am not able to get the add ins in the add in tab , when i click on browse i dnt know where to find the add in , is there any particular locatin where i find the add in after installin the smart view. hyperion is in d drive and excell is in c drive.

Have you tried looking in D:\Hyperion\SmartView\Bin
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Problem with smart view

    hi, there seems to be a problem with the smart view very often that suddenlly the hyperion tab goes invisible and when i go to the addin and check the hypeiron tab then the hypeiron tab does not appers but a toolbar appears in the excell and all the links are deleted
    now when i create the essbase link and try to connect in the end the excell shuts down with unexpected error now after i re install the smart view the tab appears and workls finebut then suddenly after somdays the same thing happpens
    what could be the problem, i am using excell 2007
    thanks in advance

    Its been solved thanks

  • Smart view 11.1.2

    HI Guru's
    i am using office 2003. i have install smart view and i using http://<servername>:19000/workspace/SmartViewProviders in the shared connections URL . but i am not able to connect .
    i am getting following message
    Connection to shared services provider failed .
    error message:'cannot connect to the provider. Make sure it is running in the specified host/port . Error (404).
    i am using correct server name but i don't know about the port number . i am using 19000.
    even when i open excel i am getting error message : Failed to create smart view extension activator object . verify that it is registered properly . But i am getting smart view ribbon at the top
    can anybody help me with this error
    thank you

    If you are using Shared connections, please use Product Server URL: the URL of the server, using the syntax jdbc:oraclebi://<servername>:<port>/ for Oracle BI EE or http://<servername>:<port>/HyperionPlanning/SmartView for Planning for Planning.
    For more details, please refer to Page 18 of http://download.oracle.com/docs/cd/E17236_01/epm.1112/sv_user.pdf
    Cheers,
    Jasmine.

  • Not able to get Essbase Server list in Office with Smart View 11.1.2.1

    Anybody tried Shared Connection in Smart View 11.1.2.1? I am able to connect to but it does not show any servers in the non editable drop-down box. I tried this with Office 2003 sp3, Office 2007 and office 2010 but none of them is working. Also i tried to find out the datasourse.xml file in LWS-aps in shared services console but its not there. i tried the solution given on this link also but the datasourse.xml file is not in place.
    http://timtows-hyperion-blog.blogspot.com/2011/04/smart-view-private-connection-issue.html
    my Environment.
    Win 2003 SP2 32 bit
    SQL 2005 on separate windows box
    EPM 11.1.2.1
    Shared Services
    Essbase Server
    Essbse Client
    Essbase Integration
    Provider services
    Essbase Studio
    Configured all of the above components successfully.
    i'm connecting to Essbase through this URL http://<server>:19000/workspace/SmartViewProviders . it shows the login window and allow me to get in. but the drop down box is empty. no server listed.
    Please let me know what I'm missing.

    I am also getting same problem as gaurav,
    I checked,"http://<servername>:13080/aps/SmartView" Analytic Provider Services also running.
    instead of Server name i tried localhost, ip address, and computer name.
    but still not getting anything in drop down, even "Add New Server" Option also.
    I thought this may be because Analytic Provider Services was configured after Shared Services. But for that i followed the steps:
    1. Stop the Analytic Provider Server and Foundation Services.
    2. Open the EPM System Configurator through Start -> All Programs -> Oracle EPM System -> Foundation Services -> EPM System Configurator.
    3. Expand Hyperion Foundation and only tick the option 'Deploy to Application Server'
    4. Click Next through the Configurator until complete.
    5. Restart the Foundation and Analytic Provider Server Services.
    6. Open Excel, connect to the Shared Connections.
    But problem Continuous.

  • Hyperion Smart View meta read problem

    hi
    I created a template for users in smart view.I was testing with some native users.
    the template which i created was with all the dimension and I Descendants dimensions.
    some users are having write back functionality.
    i used Meta Read filters for some users who will be only having access to a particular dimension and member.
    At first i created a template with all the dimension and descendants and did save the report and I logged in with native users in to the same template.When i click on member selection I am able to see the applied filter( Meta Read) is working properly.But by default when i login with the same user at first i am getting an message saying that for some members you are are not having permission upto there i am fine.
    My question is
    Is there a better work around.So that when the user logs in smart view the template which provided he should only see the members for which he is having permission and the rest of members for which he is not having permission should disappear.
    Thank in Advance
    Thanks
    Kris
    Edited by: user9363364 on Mar 30, 2010 1:08 PM

    You most likely have a SV template set up and are trying to share that template, correct? The functions are looking for the SV xla in the bin folder, so if SV is installed in different paths, then your SV template will produce that error. When you first open the template and you get the update links, select edit, then browse to where the user has SV installed and go to the bin folder. This should update those functions.

  • Smart View not working in Hyperion 9.3.3 (Getting Host/Port Error (500))

    When i m trying to connect smart view , i Get the following Error Message . Cannot Connect to the Provider . Make sure its running in the specified host/port . Error (500) . I have tried the following at my end . Restarted the IIS and Web Servcies . I need to resolve the issue as soon as possible . Kindly Help .

    Hi this is the Detailed error Message I got when I try to run hfmofficeprivder.aspx
    Exception Details: System.Web.HttpException: The current identity (NT AUTHORITY\NETWORK SERVICE) does not have write access to 'C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files'.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [HttpException (0x80004005): The current identity (NT AUTHORITY\NETWORK SERVICE) does not have write access to 'C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files'.]
    System.Web.HttpRuntime.SetUpCodegenDirectory(CompilationSection compilationSection) +3474107
    System.Web.HttpRuntime.HostingInit(HostingEnvironmentFlags hostingFlags) +226
    [HttpException (0x80004005): The current identity (NT AUTHORITY\NETWORK SERVICE) does not have write access to 'C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files'.]
    System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3426839
    System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88
    System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +149
    Regards,
    David
    Edited by: David Mallela on May 24, 2012 8:04 PM

  • Problem opening form in Smart View

    We are using 11.1.1.3. When viewing a Planning form in the Workspace, I choose File->Open in Smart View. This works for some forms but not others. Excel is launched but nothing happens. Am I missing a form setting? Any help would be appreciated.

    * Was the form created by editing another existing form, and saved using the 'Save as' option?
    * Do the forms have Dynamic Time Series (DTS) members displayed in the columns or rows?
    * Do these forms have '&' in the form name?
    HTH-
    Jasmine.

  • Request Timedout error while submitting data in Planning thorugh Smart view

    Hi ,
    We are getting Request Timed out error when trying to submit data to Planning application using Smart view.
    " Cannot connect to the provider because:The request Timed out. Contact your administrator to increase netRetryCount and netRetryInterval." Can someone please tell me where can i increase these time out settings? Can someone give me the link of the document that has detailed steps for this.

    Go to the knowledge base and search for document ID 744559.1
    Cause
    By design, Internet Explorer imposes a time-out limit for the server to return data. Internet Explorer does not wait endlessly for the server to come back with data when the server has a problem.
    Smart View communicates via HTTP for which Internet Explorer DLLs are utilized. Smart View users who perform large requests or have a slow network connection can encounter the error, "The request timed out. Contact administrator to increase NetRetryCount and NetRetryInterval."
    This error message can be misleading since this error also occurs, if the Internet Explorer time out settings do not cater for larger operations. By default, Internet Explorer has a KeepAliveTimeout value of one minute and an additional limiting factor (ServerInfoTimeout) of two minutes.
    Solution
    Please see the following two Microsoft articles for further information:
    http://support.microsoft.com/kb/813827
    http://support.microsoft.com/kb/181050
    The following steps should be done with the assistance of your Systems Administration group. It is recommended a backup of the registry is done prior to making any modifications.
    On the client machine, update/add the following registry keys:
    1. Open the Registry, Start -> Run -> Regedit.
    2. Locate the following section:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]\
    3.Create the following new DWORD keys with decimal values:
    ReceiveTimeout=480000
    KeepAliveTimeout=180000
    ServerInfoTimeout=180000
    In this example, the ReceiveTimeout setting is 8 minutes. The KeepAliveTimeout and ServerInfoTimeout settings are 3 minutes. Set these to greater than the longest running request.
    4. Restart the machine for the new settings to take effect.

  • Smart View compile error on startup

    Hi
    Just installed the following components:
    - Windows 2008R2
    - Office 2010 x64 with SP2
    - Smart View 11.1.2.5.210 (x64)
    When I start and close Excel I get the following:
    Microsoft Visual Basic for Applications
    Compile error in hidden module: HsTBarPublic.  This error commonly occurs when code is incompatible with the version, platform, or architecture of this application.
    The same software version works fine on 32bit versions of Office 2010 + Smart View.  Any ideas for troubleshooting 64bit Applications of Office and Smart View?
    Thanks
    Anthony

    Had the same problem with conflict between CS6 (Photoshop, Premier, After Effects, etc.] and Net Nanny.  Solution was as follows:
    1. Log onto Net Nanny Admin Tools
    2. Click on Application Exceptions
    3. Click Add
    4. Browse to folder containing "dynamiclinkmanager.exe".  On my computer (Windows 7 Pro) it was located in
         C:\Program Files (x86)\Common Files\Adobe\dynamiclink\CS6
         [I do have dynamiclinkmanager.exe elsewhere, but Net Nanny only allows you to identify a given file name once]
    5.  Select dynamiclinkmanger.exe, Open, OK
    6.  Repeat steps 3 to 5 but this time for "dynamiclinkmediaserver.exe" which I found in
         C:\Program Files (x86)\Common Files\Adobe\dynamiclinkmediaserver\1.0
    7. Click OK to accept application exceptions
    8.  Exit Net Nanny Admin Tools
    7.  On my computer Photoshop would now load without incident, but if necessary reboot.
    NOTE:  Once I solved the dynamiclinkmanager stopped problem I then encountered an Adobe Media Core stopped problem when I started After Effects and Premier.  To resolve this second problem with Net Nanny I repeated the above steps adding the following application exception:
         "Adobe QT32 Server.exe"
         which I found in
         C:\Program Files (x86)\Common Files\Adobe\dynamiclinkmediaserver\1.0
    [Again there are multiple copies of "Adobe QT32 Server.exe" but Net Nanny accepts only one, and I selected the one in "Program Files (x86)" and not the ones in "Program Files" because of this is where I also found dynamiclinkmanager.exe.  All works fine now.]
    Hope this works for you.

  • Access Issue Smart View

    Hi all,
    Few user in our company are having hard time opening Data forms in Smart View. When they try to open the forms they get an following Error:
    The data Form XXXX Is invalid.Check Log for details. (where XXXX is the name of form).
    I have tried following steps to fix the problem but was unable to do it:
    Created a Native ID and assigned it similar access as these Users had and was able to open the forms successfully via Smart View using this ID.
    The important thing is these users are from differnt groups and have access to different applications but the provision to all the group is same.
    There are other User in the same groups who are able to open the forms successfully and have same provision as the users that are facing the issue.
    I also tried to pull these users out of the group and provision them with the access they were having from group but after setting this up they had same error while opening the form.
    There is no problem with the istallation of Smart View on their local machine as they are able to login via Native User login i created.
    It would be great help if anybody could suggest a way to Fix this issue.
    Thanks In advance!!

    Hi Abhishek,
    I have not provided the access to the remaining dimensions. That is why it is showing as the No Access.
    Thanks for the help.
    Regards,
    Stally.

  • How to connect Smart Views against BIC2G OBIEE+ Analysis services

    I am trying to run Hyperion Smart View 9.3.1.2.041 against OBIEE+ demo package BIC2G:EE+ v10.1.3.3.2-9.3.1-7.9.5 but I can’t get the connection to work.
    The documentation or the package BIC2G:EE+ v10.1.3.3.2-9.3.1-7.9.5 does contain errors that makes it hard to set up and I have not found any useful documentation how to circumvent the "Unable to connect to the provider" message that I get during connection.

    Good day!
    Try to start the service (Hyperion Provider Services - Web Application). If it doesn't work, try to stop it and start it again.
    I had this problem before.
    Cheers!

  • Blackberry Desktop Software shuts down when running Sprint Smart View Internet Service (Air Card)

    Just installed Blackberry Desktop Software and it runs ok when I am not running Sprint Smart View (This is my program for my internet service / sprint air card).  As soon as I start Sprint Smart View the desktop software no longer works and just shuts itself down after a minute or two.

    I'm not familiar with this particular package, but with similar packages from other carriers there's usually a setting that lets the program control your Network - it may only say Wi-Fi.
    The BlackBerry drivers include a Dial-Up connection which is probably getting shut down by the software which kills Desktop Manager.
    If you turn off that option, the problem should go away (reboot probably a good idea).
    Jerry

  • Error in Smart view

    Hi,
    I've just started working with the latest version, 11.1.2.1, under Windows XP and am getting a recurring error whereby every time I attempt an operation that goes to the cube it gives me "Unspecified error" in a popup window instead and the operation is not performed. I happened to stumble across a work-around - go into the Smartview options dialog, re-select the existing value from a drop-down menu (doesn't seem to matter which one) and click OK then re-attempt the cube operation and it seems to work again for a while. I've no idea what is triggering the initial problem. please suggest.
    I also tried to see first hidden row in report and there is Alphabet 'L' is coming again & again so that might be an issue.
    Regards

    The items in the hidden first row should be your POV items. If you toggle the POV toolbar on and off these should display and hide. The question I have is if you are using 11.1.2.1.000 you should not have this first hidden row. What versions are you using for APS/Essbase and Smart View.

  • Essbase Error (1042017): Network Error in Smart View

    I try to do Ad hoc ahalysis in Smart View via Essbase provider and get Essbase Error (1042017): Network Error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the olap.server.netConnectRetry and/or olap.server.netDelay values in the essbase.properties.
    I've tried to increase this values in essbase.properties file in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\bin directory and in Essbase Administration Services console but it has no effect. This behaviour occur only for one application. Early I has no problem with this.
    How this can be fixed?

    Please follow the steps below:
    1) Add the following parameters to the mod_wl_ohs.conf for APS within the aps location match section:
    WLIOTimeoutSecs 1800
    Idempotent OFF
    For Example:
    <LocationMatch ^/aps/>
    SetHandler weblogic-handler
    WeblogicCluster vm0asazon1112:13080
    WLIOTimeoutSecs 1800
    Idempotent OFF
    </LocationMatch>
    Note: mod_wl_ohs.conf file is located in <drive>:\<Oracle_EPM_Home>\Middleware\user_projects\epmsystem1\httpConfig\ohs\config\OHS\ohs_component directory.
    Make a back up copy of the mod_wl_ohs.conf file before editing.
    2) Save the mod_wl_ohs.conf
    3) Restart Reporting and Analysis Framework - Web Application
    4) Restart Oracle Process Manager (ohsInstancexxxxxxxxxx)
    For more details on the Weblogic Plug-ins parameters, please refer to this link: http://download.oracle.com/docs/cd/E13222_01/wls/docs92/pdf/plugins.pdf
    Hope this helps.
    HTH-
    Jasmine.

  • Smart View

    Hi,
    I have a strange problem.
    One of our users have a problem with logging into Essbase cube via Smart View, but it those not generate any errors, just do not log in user, just like in case of invalid credentials.
    Other users can connect from that machine without any problems.
    In Essbase log i see only something like that.
    [Wed Feb 18 14:34:50 2009]Local/ESSBASE0///Info(1051164)
    Received login request from [172.25.17.73]
    [Wed Feb 18 14:34:50 2009]Local/ESSBASE0///Info(1051187)
    Logging in user [??????] from [172.25.17.73]
    [Wed Feb 18 14:34:50 2009]Local/ESSBASE0///Info(1051035)
    Last login on Wednesday, February 18, 2009 2:34:50 PM
    [Wed Feb 18 14:34:50 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Security Mode (from user [??????])
    [Wed Feb 18 14:34:50 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Logout (from user [??????])
    [Wed Feb 18 14:34:50 2009]Local/ESSBASE0///Info(1051037)
    Logging out user [??????], active for 0 minutes
    Essbase is automaticly loggin off that user ?
    Can some one help me with this ?
    Regards,
    Ariel

    You probably have suppression options turned on in the 'Data Options' tab of the 'Options' dialog, and there is no non-#Missing data in the grid as currently defined.

Maybe you are looking for