Problem in getting Updated EJB methods in JSC for a Same Project

I'm Using Sun Studio Enterprise for developing EJB sets.After that i'm importing the EJB set in to JSC & using it my Project.
If i need to add some more business methods/edit the business method i'm able to do that in the Sun Enterprise IDE.After editing the EJB ,redeploying & reimporting to JSC i couldn't get the updated version of EJB in my Current Project.
We could be able to get the updated EJBs,if we are using it in a new project other than using it in the Previous one.
It's being a great problem for me.Vat shall i do for this problem?Please help me,a project is in Pending stage because of this problem.
Regards
Kajanan

Hi MWH@Keystroke,
Thanks for your consideration of my problem.I also use an EJB layer built in Sun Enterprise for the backend to my Creator-based web application.My Current problem is getting the updated EJB sets to my current project.
For Ex:
If i add a new Business method called doSomething( ),then i should be able to get that method in JSC using FinalFacadeRemoteClient1.doSomething().
But after typing FinalFacadeRemoteClient. , doSomething() method is not displaying.
If i use that in a new project [Previously not used Same Session Facades]all the updated EJB business methodss are coming.I want to use updated EJBs in the project i'm already working.
Regards
Kajanan

Similar Messages

HT204152 I am unable to update my App store Updations. the reason being billing problem asking to update payment method.many times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc.

I am unable to update my App store Updations. the reason being billing problem asking to update payment method.Many a times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc....Using ! phone 6plus .IOS8.3

What do you mean by 'refusing from the system', if you are getting an error message then what does it say ?
For a credit card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If it is and if you are getting a 'declined' message then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes Support (these are user-to-user forums) and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If when trying to download you are getting a message about a 'problem with a previous purchase' then that implies that iTunes wasn't able to collect the money for your last purchase. If that is the case then you won't be able to download anything else (including app updates) until you've paid off what you owe : Pay an unpaid balance in the iTunes Store - Apple Support
If you aren't getting the 'problem with a previous purchase' message then try logging into your account (not when trying to download something) and see if you get the 'none' option so that you can remove the card's details and be able to download updates to your apps : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support

Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

The App Store version sometimes gives problems. As you can't install 10.8.4 from the App Store, download and install the Combo edition > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US This edition will work and will update OS X to the most recent version, in that case, 10.8.4

Can we get a output in different languages for the same configuration

Hi All,
Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
language.
Thanks in Advance.
Rajesh

A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
To maintain the translations:
Go to transaction SE63 in R/3.
Go to menu Translation->R/3 Enterprise->Other Long Texts
Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
Madhavi

Alert 'There were problems downloading some purchased items' won't clear for the same 6 songs.

Alert 'There were problems downloading some purchased items' won't clear for the same 6 songs (see screenshot). Every time I download something new this alert comes up, yet when I check for available downloads there aren't any (see second screenshot). Also the 6 songs that are being flagged as having problems are already downloaded to my library, so literally it's just the alert/ notification that seems to be stuck. I've tried signing in and out of iTunes, re-installing itunes, re-starting the computer, emptying the cache etc, and but everytime I sign back in or re-open itunes the alert comes straight back up and it's driving me insane.
Can anyone help either clear the alert or stop it so that it doesn't pop up every time I try and download something else??

P.S the error message i got during the download is (err = - 5000)
Thanks in advance

Problem with getting updates to install

On one of my computers, I have been having problems getting windows updates to complete They either error out right away with codes that I cannot find any information on. Or, they run correctly but during restart, they error out at 90% (reverting) and never
get installed. This is a Windows 7 SP1 computer and there are about 50 updates that cannot install. I notice that after the update attempt the Windows Update log has the following error:
DnldMgr *********** DnldMgr: New download job [UpdateId = {F534C799-3255-44C5-841B-F78F82435AD0}.202] ***********
DnldMgr Regulation: {7971F918-A847-4430-9279-4A52D1EFE18D} - Update F534C799-3255-44C5-841B-F78F82435AD0 is "PerUpdate" regulated and can NOT download. Sequence 1753 vs AcceptRate 0.
DnldMgr * Update is not allowed to download due to regulation.
Seems like a problem but there is no information on this error if I search for it.
Also, I have run the System Update Readiness Tool (KB947821)several times and I was able to remover some of the errors it found except and error with KB2570791 that I cannot fix. It has errors with some fonts (I think), so I tried to remove the update. However
it runs for a while and then says that the update cannot be removed ad quits. So I am stuck with a computer that cannot be updated.

Here is the forum for Win. Update

Problem in getting update

Hey dere m using nokia asha 501 nd i really love it...
My phn earlier had got a notification about firmware update but i was unable to update my device due to not having internet access...
Now due to some reason by creating backup...i had reset my phn a day before...
And now i m unable to get the update for the same...
Via mobile data i have tried it in the settings but it is showing "cant validate the certificate Do you want to continue anyway?" and yes/no options are displayed but both of them are not working ..
Kindly suggest what should i do....??
P.S:I HAD ALSO TRIED IT VIA WIFI...!!

Hi Luka316,
Welcome to the forum!
What phone model is this? If its Nokia Asha phones, these are the things you must consider before having a software update:
- It’s recommended to use a WI-FI connection.
- Make sure your phone battery is charged.
- Check that the phone time and date are set correctly.
- You can force to check for an update immediately by switching off and back on "Check via mobile data" from the “Phone update” menu.
- It’s recommended to backup your data before updating your phone software.
- You can create a backup in Settings > Backup.
- Creating a backup requires a MicroSD card inserted in the phone.
Keep us posted.

Short/Exc. Rcpt not getting updated when all OPIDs confirmed for partial qty

Hi Friends,
I need your inputs about 'Short/Exc. Rcpt' updation in the Production order once partial confirmation is done.
Example :
Order qty 10
I have OPID 0010 confirmed yield 4 confirmed scrap is 1
OPID 0020 Confirmed yield 4
I gone through the F1 on this field it will be get updated only after the final confirmation, i tested that its updating only after final confirmation status
on the order/operation.
My client seeing problem that even though scrap confirmed, but in MD04 this quantity shown as open pproduction order qty as 6 (excluding scrap confirmed it should be 5).
Please let us know what setting needed for this field 'Short/Exc. Rcpt' updation even after PCNF, PDLV status.
Thanks in advance for your quick response.
Nag

Hi Arnab Banerjee,
In Sechedule line item posnr give the posnr value intead of 'X'.
wa_order_schedules_in-sched_line = wa_salesschedu-etenr.
wa_order_schedules_in-itm_number = wa_salesschedu-posnr.
wa_order_schedules_in-req_date = wa_salesschedu-edatu.
wa_order_schedules_in-req_qty = wa_salesschedu-wmeng.
APPEND wa_order_schedules_in TO it_order_schedules_in.
wa_order_schedules_inx-sched_line = 'X'.
wa_order_schedules_inx-itm_number = wa_salesschedu-posnr instead of u2018Xu2019
wa_order_schedules_inx-req_date = 'X'.
wa_order_schedules_inx-req_qty = 'X'.
APPEND wa_order_schedules_inx TO it_order_schedules_inx.
and do follow for all posnr = posnr value instead of X.
Cheers,
Naveen.

Dr/Cr indictor getting updated wrongly in J_1IPART2 table for ETT-RLFC

Dear All,
While Reconciling the excise reports, I had been observed some issue in J_1IPART2 table for the excise transaction type RLFC.
All the entries for Excise TT RLFC the Dr/Cr indicator should be “S-DEBIT” but system has updated the value “H-CREDIT” for all the entries.
Because of this issue system is displaying the values wrongly in RG23APART2 register.
Reference Oss notes: 1756565/1907900.
I had raised oss to SAP as well only recieved intial response saying will be assigned to expert & he will get backs to you.
But I haven't recieved any response from SAP.
J_1IPART2 Table entries:
Accounting entries for the internal document: T.Code-J1IH -> Display
RG23A PART2 Register Printout
If any body has experienced this strange issue please let me know.
Regards,
S.Himavanth.

Dear Nikhil,
Still SAP haven't released this not generally.
Raise OSS to SAP on the issue that you are facing they will reply to that.
Regards,
S.Himavanth.

Does anyone know how l can update my method of payment for itunes,l have done what l should still no success,l called apple what a joke they sent me back here

how can l update my method of payment

Hiya!
Try following these steps:
1) Open iTunes on your computer and sign into your account.
2) Click the Account link under the QuickLinks list
3) There should be an Edit Button by your credit card and billing information. Click the edit button next to the section you wish to make changes to.
4) Enter in your changes. Make sure your billing address matches exactly what is listed on your credit card statement, becuase variation can lead to purchases not going through properly.
5) When all of the information is up to date, save your changes.
Hope this helps! Best wishes and good luck!
Message was edited by: RaineStar (Because typos are no fun)

Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome.

A problem while getting a EJB remote interface from SJSAS 9.0

I hava deployed a session bean in SJSAS 9.0
I wrote some codes to get the remote interface as follow:
Context ctx = null;
Hashtable env = new Hashtable();
env.put ("java.naming.factory.initial","com.sun.jndi.cosnaming.CNCtxFactory");
env.put("java.naming.provider.url","iiop://127.0.0.1:3700");
try {
ctx = new InitialContext(env);
} catch (NamingException ex) {
ex.printStackTrace();
try {
Object cs =ctx.lookup(ejb.MySessionBean);
} catch (NamingException ex) {
ex.printStackTrace();
A exception occured during the lookup operation.
javax.naming.NameNotFoundException [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]
at com.sun.jndi.cosnaming.ExceptionMapper.mapException(ExceptionMapper.java:44)
at com.sun.jndi.cosnaming.CNCtx.callResolve(CNCtx.java:453)
at com.sun.jndi.cosnaming.CNCtx.lookup(CNCtx.java:492)
at com.sun.jndi.cosnaming.CNCtx.lookup(CNCtx.java:470)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at demo.Main.run(Main.java:46)
at demo.Main.main(Main.java:62)
Caused by: org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0
at org.omg.CosNaming.NamingContextPackage.NotFoundHelper.read(NotFoundHelper.java:72)
at org.omg.CosNaming._NamingContextExtStub.resolve(_NamingContextExtStub.java:406)
at com.sun.jndi.cosnaming.CNCtx.callResolve(CNCtx.java:440)
... 5 more
Anyone can solve this problem for me???
Thanks a lot

We don't recommend explicitly instantiating the CosNaming provider within a stand-alone java client when accessing beans within the Java EE SDK. We have a simpler approach that involves just instantiating the no-arg InitialContext. Details are in our EJB FAQ :
https://glassfish.dev.java.net/javaee5/ejb/EJB_FAQ.html
--ken

Problem in getting update records count while executeBatch()

hi,
I have used "Select in Insert" queries for migrating data from one table to another.
like
INSERT INTO TABLE1 (COL1, COL2)
SELECT COL1,COL2,... FROM TABLE2
WHERE COL1 = ... AND COL2 = ...;
Case 1:
I added these statements as addBatch() & at the end i execute method " executeBatch()". It returned the array of integer having record count for each query respectively.
But that count was always be -2 i.e. SUCCESS_NO_INFO.
Case 2:
If i run the same code with executeUpdate() method , it returned me the correct number of records counts that are inserted into the table.
I cudn't able to understand that it is failing for case1.
Can anybody tell the reason for this behaviour .......................
Edited by: user11187328 on Mar 17, 2010 3:45 AM
Edited by: user11187328 on Mar 17, 2010 3:46 AM

hi,
Thanks again for a correct reply but can u also tell me tht which jar i needs to included.
There are so many jar files & should i remove old jar files or jvm auto picks the updated jar file.
Following jar files are shown on the link:::
ojdbc5.jar (1,996,228 bytes) - Classes for use with JDK 1.5. It contains the JDBC driver classes, except classes for NLS support in Oracle Object and Collection types.
ojdbc5_g.jar (3,081,328 bytes) - Same as ojdbc5.jar, except that classes were compiled with "javac -g" and contain tracing code.
ojdbc6.jar (2,111,220 bytes) - Classes for use with JDK 1.6. It contains the JDBC driver classes except classes for NLS support in Oracle Object and Collection types.
ojdbc6_g.jar (3,401,519 bytes) - Same as ojdbc6.jar except compiled with "javac -g" and contains tracing code.
ojdbc5dms.jar (2,429,777 bytes) - Same as ojdbc5.jar, except that it contains instrumentation to support DMS and limited java.util.logging calls.
ojdbc5dms_g.jar (3,101,875 bytes) - Same as ojdbc5_g.jar, except that it contains instrumentation to support DMS.
ojdbc6dms.jar (2,655,741 bytes) - Same as ojdbc6.jar, except that it contains instrumentation to support DMS and limited java.util.logging calls.
ojdbc6dms_g.jar (3,423,263 bytes) - Same as ojdbc6_g.jar except that it contains instrumentation to support DMS.
orai18n.jar (1,656,280 bytes) - NLS classes for use with JDK 1.5, and 1.6. It contains classes for NLS support in Oracle Object and Collection types. This jar file replaces the old nls_charset jar/zip files.
demo.zip (603,363 bytes) - contains sample JDBC programs.

Problem in getting updated data of VO

I have a jspx page which have one ADF input LOV alongwith other controls. I have also a valueChangeListener attached with it so that whenever, user changes value, i want to process that value along with other values in VO which are set by LOV in the background. Now the problem is that in valueChangeListener when i access VO and currentRow of that VO, It shows previous values i.e. VO is not updated at the moment and ValueChangeListener is called first. How i can refresh VO first before calling ValueChangeListener.

Now the problem is that in valueChangeListener when i access VO and currentRow of that VO, It shows previous values i.eThis is expected. The new value you expect to see will only be available in event.getNewValue().
The valueChangeListener is invoked in Process Validations and Apply Request Values phases.
Values are set in the datacontrols/VO row in a later phase (Update model phase)...
Ref: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31973/af_lifecycle.htm#insertedID2

How can i get updated exchange rate from website for my currency convertor

i found a website but it provides this service in XML and i don't know how can i use this in my j2me application.
anybody knew this ....thanks

You do not have the original footage anywhere?
If not your going to have to use Streamclip or another product to convert to DV then export out for the web.
Getting it off DVD
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
Ready for the web
http://danslagle.com/mac/iMovie/qt_plugins/3001.shtml

Problem in getting Updated EJB methods in JSC for a Same Project

Similar Messages

Maybe you are looking for