Problem in i PAD charging

I have proplem with my new i PAD 3, i m using my i PAD for last 3 month, now its not charging, i have my international warranty, im living in Jordan, how i can solve my big proplem

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Similar Messages

The iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger

the iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger. PLS anyone with any solution

@wetdro
If your device has been jailbroken during the warranty, Apple will not service it.
Maybe you missed that in this article:
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

HT1476 I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quic

I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quickly .

http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

My need help with my iphone. i got up yesterday morning and the phone was completely off. Also, is not charging problem because it was charge before that happen.c

I need help with my iphone. For some reason is off completely and refusing to come on. I believe is not charging problem, because it was charge before that happen.

You have posted under MacBook Pro.
I have asked the administrators to relocate this post to the iPhone section where it is more likely to get a helpful response.

My ipod touch wont play any music, when i try to play a song, it just keeps pausing. no sound comes out of the headphones or internal speakers. what can i do to fix this problem? ive tried charging it and resetting it but nothing works.

my ipod touch wont play any music, when i try to play a song, it just keeps pausing. no sound comes out of the headphones or internal speakers. what can i do to fix this problem? ive tried charging it and resetting it but nothing works.

my ipod touch has the same problem. I restored it three times, but that can't help.

Hi i have problem my i pad didnt work

hi i have problem my i pad didnt work and i tried to press home button and power to gether for 15 second
nothink happen
i press the home button for 2 min and didnt work
what should be do i live in jordan and i bought the new ipad 4g from china when i was there

See here http://support.apple.com/kb/TS3281

Please i nedd help my account do not let me put any credit card and said that I have some problem with a past charge bur wonr let me pay any way, so i cant down load anything please what can i do

Please i nedd help my account do not let me put any credit card and said that I have some problem with a past charge bur wonr let me pay any way, so i cant down load anything please what can i do

go to this page and cotact iTunes store and they can help you out with this
https://expresslane.apple.com/Issues.action

Problems with original wall charger

I have problem with my wall charger. It can't charge my iphone, however it can charge without problems other iphones. My iphone can charge via notebook. Anyone have similar problem? Software is 2.0, iPhone is 2G.

My PlayBook charger works flawless with my Torches, 9700, 8520, HS 500, HS 700, VM 605.
If its wonky with two of them, might be the charger.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Problems with track pad and osx installation disc on macbok.

Okay so I am having two separate problems with my macbook.
First, the track pad, or the button beneath it, is pretty much completely out of commission. When I try and use it, the computer acts as if I am holding down the button all the time. Example, when I drag it across the desktop, the "click-and-drag" square starts appearing next to the cursor or when move the cursor on an icon, it tries to click and drag that. The only way that I can fix it thus far is to hook up my wireless mouse. Hoping someone else has a better solution so that I can continue to use the notebook on the go without having to bring the mouse. Note: the button does not appear to be depressed in anyway.
Second problem is happening when I attempt to reboot the computer with the OS X Leopard disk in for a re-installation. When the gray start-up screen appears, before the gray apple comes on the middle of the screen, a folder icon with a question mark on it appears for a split second and then turns into the normal apple icon after which my OSX disk is spit out of the drive and the computer boots straight to the desktop. I have attempted holding down the control button, the option button, and starting the process while the computer is still turned on and then just restarting it, the disc is ejected upon restart every time. I have reinstalled the OS with this disk once before and it has worked fine and other disks seem to be working fine in the drive, so I am at a lost here.
I know that was a lot of info but if anyone out there can help me out with either one of these problems it would be much appreciated.
Thanks.

exactly the same issu with the track pad here.
I v tried to use it without the battery but the problem persist.
If I use an USB mouse i can move it arnd but wen I click or double click nothing happen...so is useless.Same problem with the Blur Tooth wireless mouse.
The issue appear several months ago...after a couple of weeks went away, and now is back again. I try the routine manteinance but nothing solved the issue.
Any suggestion? I have some urgent work to do ...I will try tomorrow to bring it in an apple store but I can't leave it with them ..
Thanx in advance

Intermittent problems with iphone 3g "charging not supported"

I notice quite a few complaints about intermittent 'charging not supported' messages.
I have been getting the same message on my iphone 3g.
I have ELIMINATED the cord and plug as the problem in this case by the following method:
I found that by LOWERING the line voltage to the charger with a variac, I could get rid of the message RELIABLY for a period of time.
By turning the variac off and on, and by varing the voltage setting, I can reproduceably get either charging or 'charging not supported'.
Since there are no changes being made in the connections to the phone and charger, I eliminate them as causing to the problem.
I suspect a deteriorating component in the charger is reporting some kind of error to the phone via some communications channel.
I have not tried opening the charger, but if and when it finally dies, I will do so.
This morning, the charger worked with the variac set to 80 volts.
Anyone on the design team around that can suggest other tests?
-bz-

The unit finally failed and I opened it up. It appears to consist of an AC-->dc converter with suitable filters and regulators and a small computer that probably talks via I2C or a similar protocol to the iphone.
I suspect that components are defective and the output voltage is outside the range it thinks it should be or some problems with the communications cause it to send an erronious message in response to the query sent by the iphone. I did NOT see any obviously bulging electrolytic capacitors, but I did not test for high ESR and I suspect that is the problem.
A 'off brand' AC Charger of iPod and iPhone from Radio Shack works fine while BOTH authentic APPLE iphone 'tiny cube' chargers are going for recycling.
Software fixes may cause the iphone to either keep trying until it gets the right response or ignore the erronious responses.

DateTimeAxis min/max bug? Problems with consistent padding. Date Wrapping.

I have been working on a problem with a BarChart object that I've created using dynamic data.
My primary issue is that I can't seem to get the proper min/max values to set for the chart.
To solve this I manually found the min and max of the data set of Dates and set the min and max of the chart. This allowed me to finally see all the floating custom bars (each bar is rendered with a user set fill), however now if I have a bar that extends over a year change the horizontal axis labels do not wrap the date properly, so instead of 2/10 (feb 2010) being the last date, 12/09 (dec 2009) is the last date.
I've been trying to dynamically adjust the padding based upon a change event, but so far to no avail. Partially I think because I'm not sure which event for the function to fire on.
private function dateAxisGen(r:Array):void {
                var min:Number = r[0].startTime.time;
                var max:Number = r[0].endTime.time;
                const PAD:Number = 2;
                const MILLISEC_IN_MONTH:Number = 2629743830;
                const MILLISEC_IN_WEEK:Number = 604800000;
                const MILLISEC_IN_DAY:Number = 864;
                for (var i:int = 1; i < r.length; i++) {
                    var o:OperationXT = OperationXT(r[i]);
                    min = Math.min(o.startTime.time, min);
                    max = Math.max(o.endTime.time, max);
                // Calculates the maximum range, then adds an appropriate
                // padding to the chart via extra time. TODO
                /* var range:Number = max - min;
                if(range >= MILLISEC_IN_MONTH) {
                    dAxis.padding = (MILLISEC_IN_WEEK/1000000)/PAD;
                    dAxis.padding = (MILLISEC_IN_WEEK/1000000)/PAD;
                } else if(range >= MILLISEC_IN_WEEK) {
                    dAxis.padding = (MILLISEC_IN_DAY)/PAD;
                    dAxis.padding = (MILLISEC_IN_DAY)/PAD;
                } else {
                    dAxis.padding = PAD;
                dAxis.minimum = new Date(min);
                dAxis.maximum = new Date(max);
this, however, does not adjust the padding properly when an operation is removed from the list. Not to mention I still have the date wrapping error. It gives me the following error:
Cannot access a property or method of a null object reference.
    at mx.charts::AxisRenderer/measureHorizontalGutters()[C:\work\flex\dmv_automation\projects\d atavisualisation\src\mx\charts\AxisRenderer.as:2244]
    at mx.charts::AxisRenderer/calcRotationAndSpacing()[C:\work\flex\dmv_automation\projects\dat avisualisation\src\mx\charts\AxisRenderer.as:1858]
    at mx.charts::AxisRenderer/adjustGutters()[C:\work\flex\dmv_automation\projects\datavisualis ation\src\mx\charts\AxisRenderer.as:1534]
    at mx.charts.chartClasses::CartesianChart/updateAxisLayout()[C:\work\flex\dmv_automation\pro jects\datavisualisation\src\mx\charts\chartClasses\CartesianChart.as:2239]
    at mx.charts.chartClasses::CartesianChart/updateDisplayList()[C:\work\flex\dmv_automation\pr ojects\datavisualisation\src\mx\charts\chartClasses\CartesianChart.as:1366]
    at mx.core::UIComponent/validateDisplayList()[E:\dev\gumbo_beta2\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8065]
    at mx.managers::LayoutManager/validateDisplayList()[E:\dev\gumbo_beta2\frameworks\projects\f ramework\src\mx\managers\LayoutManager.as:663]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\gumbo_beta2\frameworks\projects \framework\src\mx\managers\LayoutManager.as:736]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\gumbo_beta2\frameworks\ projects\framework\src\mx\managers\LayoutManager.as:1069]
Any help with my problem would be greatly appreciated.
ADDITIONAL INFO:
Alright, so I've discovered that the ONLY time the date wrapping error occurs is when the axis labels contain only the month and year, any other time it places it properly.
Does anyone know where I can report this bug?

Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf.

HP 1536 printing problem when using the charger

On printer, scan HP 1536, when I print manualy the copy is perfect.But when I use the charger, I have two vertical lines on the copy.Somebody can help me to solve this problem.thank you in advance

Take a look at this link from HP. Take a good look at the ADF Glass strip for any foreign matter.

Problem with Free of Charge Sale Returns against Cost Center

Dear All,
The problem is related to Free Sales which is as follows -
I have issued free of charge against Cost Center & now I want to know whether any process is there or configurations can be done to return the free of charge issued goods along with the cost center. As in the order in header level while doing return the cost center is not getting reflected.Again in the outbound delivery creation mode also at the item detail level under the "Financial Processing" tab the cost center field is present but it is greyed out/ inactive.
Please suggest what are the configurations needed to create returns of the Free Of Charge goods against Cost Center.
Looking forward to early replies.
Thanks & Regards
Priyanka Mitra

Hello Mr. Lakshmipathi,
First of all thanks for your help.As per your suggestion I have maintained the Cost Center against the Order Reason in OVF3 and it is getting reflected in the Sales Order but whenever I am keeping the field of Cost Center blank in OVF3 the "Cost Center " is remaining inactive & not even displayed in Sales Order.Instead the system is asking for WBS element.
Now I want to know is there any configuration possible so that the Cost Center field will be reflected in either Sales or Delivery Order as blank space & not greyed out which will be filled up manually.
Plesae suggest.
Thanks & Regards
Priyanka Mitra

Problem with Free-of-Charge Sales

Dear All,
The problem is with the document flow of free-of-charge sales where although I am using standard Item Category KLN still after completion of the Sales Process till invoicing the status is showing " Being Processed" against Free-of- Charge Sales Order & "Completed" against Delivery, PGI & Invoice.
How can I change the status to "Completed" against Sales Order also?
Please help.
Thanks & Regards
Priyanka Mitra

Check the schedule line category whether it is marked as item relevant for delivery,remove the check box and try.
Ram

Problem in i PAD charging

Similar Messages

Maybe you are looking for