Problem in IDES

Hi all,
I have an IDES system for my personal use, while working on it some how it got updated to internet. now it is not working . So, is there is any way to remove updated file !. or need to reinstall again.
thanks.

Hi
some how it got updated to internet. now it is not working
What is problem you while starting the sap
Provide us more information like your OS/database
Did you check all your oracleservices are running (If its oracle database)
Regards
Uday

Similar Messages

I've swapped to i5c so my hubby has my i4s with pay as u go but now it won't load or sent e-mails! I've tried tech support suggested by Talkmobile for 'fix' but it hasn't solved problem,any ideas?..

I've swapped to i5c (great phone) so my hubby has my i4s with pay as u go but now it won't load or sent e-mails! I've tried tech support suggested by Talkmobile for 'fix' but it hasn't solved problem,any ideas?..

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

I am exporting a pages doc to ePub and I keep getting formatting problems any idea thx in advance

I am exporting a pages doc to ePub and I keep getting formatting problems any idea thx in advance

Since you don't say what the "formatting problems" are, all we can say is:
"There, there. Hope they get better."
Peter

TS2776 An error message keeps appearing when I have I tunes open, saying could not complete request. Any similar problems or ideas to resolve?

An error message keeps appearing when I have I tunes open, saying could not complete request. Any similar problems or ideas to resolve?

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

My mac will not send or receive email's... its not internet connection... my iPhone still receives emails... so I'm not sure how to troubleshoot this problem, any ideas?

my mac will not send or receive email's... its not internet connection... my iPhone still receives emails... so I'm not sure how to troubleshoot this problem, any ideas?

What does the Mail Connection Doctor return?
The link in my first replay included :
If you still can’t send or receive email
Mail Connection Doctor may be able to tell you more about the issue.

My ipod will only charge when i fiddle with it and hold it in a weird position, i've tried a 2 new chargers but i still have the same problem, any ideas what to do?

my ipod will only charge when i fiddle with it and hold it in a weird position, i've tried a 2 new chargers but i still have the same problem, any ideas what to do?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. (is this what you meant by charger?)
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I can no longer access the iTunes store on my I pad. I see others have this problem. Ideas?

Any ideas re how to get the iTunes store?

no error message. it works without a problem in my computer. but a few minutes ago, it just opened on my ipad, so i'm ok for now. but i had a problem yesterday. i had it open, and it froze for several hours. this didn't used to happen. something must be going on. it's very frustrating

5th Gen Ipod Touch not recognised 2 windows pcs and my mac mini, Itune up to date, tried DFU and recovery, returned from apple inspection as working, still no joy, anyone elese had this problem, any ideas?

Since we had the ipod touch since xmas we have had slight problems with charging and connecting to itunes, i sent back to Apple to repair/inspect, they have returned it back as working fine, tried 2 different windows pcs, my mac mini and cannot get the ipod to connect, Windows tries installing drivers only to say it has failed, uninstall try again, go into recovery mode and dfu, nothing seems to work. I have 2 ipads an iphone 4s which all connect faultlessly. Any ideas?

Have you tried another cable? Some iPods were shipped with cable that either did no work initially or shortly failed.
Make an appointment at the Genius Bar of an Apple store. Bring the cable too.
Apple Retail Store - Genius Bar

Hard Disk Problems - Any ideas anyone??

I recently replaced my ibook's HD with a new one, every thing has been fine until just recently. Mysteriously on my control click menus and other pop up windows like save and open, all system text has turned into code. use the following url for an example http://i6.photobucket.com/albums/y218/whatapileof/menu.jpg . The text is now N21 and things like that. Any ideas? When i tried to do a HD repair in disc utility, the permissions are fine but when i repair the disc it fails each time. I have tried to reinstall the OS but that also fails. I am guessing that the menu text and this repair issue are hand-in-hand. Only thing i can think of is doing a re-format. There’s no other issues that i can spot and the problem is bearable. Im used to doing reformats with windows. never thought i would have to with OSX though. Any ideas how to avoid?? Cheers.
Intel iMac 1.83GHz Mac OS X (10.4.7) iBook G4, Cube G4, iMac G3

How did you install your OS onto the new hard drive? Did you do a clean install or did you use one of those disk cloning utilities?
Have you tried creating a new user and seeing if that new user also has this problem? If you restored your Library folder from an old OS installation, it could have corrupted some Finder preference.
If all else fails, do is re-format and re-install from scratch.
I have never seen this before. See if a new user has the same problem. If that doesn't help, since it is bearable, wait a few days and see if someone else reponds to this message and knows a quick fix. If that doesn't happen re-format and re-install.

Iphoto export problem any ideas???

I cannot export photos before a certain date. I have about two years worth in my iphoto and after a certain date I can export. I don't know what is different between the photos. I tried command option while launching iphoto and none of those options corrected them with the exception of two photos. I didn't find anything listed in the type of file except jpg's...no png's as some people have found. And it is strange because after July of 2012 everything exports fine. I don't get it does anyone have any ideas? I would logically think a problem would not resolve itself and be ok after a date with any recently photos able to export and older ones unable to.I haven't added any programs and if I did I would think they would have created the problem not solved it....I want to be able to export my old photos...I have spent quite a bit of time on it...any help would be great. OH and another problem I am out of state and my start up disk is back home in MI and I am in CA

Take a look at theis thread in the iPhoto forum https://discussions.apple.com/message/21143278#21143278
If this doesn't help you might post your question over in the iPhoto forum.

Bizarre App "de-selection" Problem - Any idea?

Ok... This is strange enough that I am at a total loss. This literally just started happening this morning for no apparent reason. Basically what's going on is that when I am in an app, like safari or pages, or anything, after about 30 seconds of using the current window everything up top will grey out and the cursor will disappear as if I am switching to another app or something. I have to replace my cursor and continue typing (like I've had to do 3 times up to this point right here). There is nothing else open to be switched to so it really doesn't make any sense... Does anyone have any idea what might be happening? Need any more information? Thank you.

Reformatted... Re-installed OSX SL... Just restored backed up files individually, carefully checking permissions. Problem solved. Works fine. Seems to be the only solution.

Problems between IDE and Deployment on App Server 8.2

I have an application that I wrote last year using JSC-EA and converted it ti JSC2-1. I can run the application on my development environment SunAppServer 8.2 with no problems.
When I attempt to deploy it to a standalone Sun App Server 8.2 I experience the following:
1) Login page works fine
2) Main menu selection page works fine
3) Results page does not display information.
More details:
Main Menu page consists of:
1) a page with a page fragment that contains a menu.
2) 3 or 4 JSF components
Results page consists of:
1) 2-3 JSF text components (display OK)
2) Same menu page fragment as above (displays OK)
3) Second page fragment that contains a table with components added under program control (does not get displayed in deployment server, but displays fine in IDE server).
Is there ANY possibility that this can be related to migration from JSC2-EA to JSC2-1? If so, what could cause this behavior?
Is there ANY explanation as to why the application displays OK in the IDE (same app server version as deployment) but not in the deployment server?
ANY help is appreciated.
Thanks,

For future references:
this happens to me too and I found that the cause is that the AM server you are going to configure, is already registered into the directory server.
Try running this command (with the obvious parameters substituted)
ldapsearch -B -T -D 'cn=directory manager' -w YOUR_CREDENTIALS -b ou=1.0,ou=iPlanetAMPlatformService,ou=services,YOUR_BASEDN -s base objectclass=* | grep YOUR_SERVERNAMEIf you found that the server you are configuring is listed here try going to AMserver console (if you have another AMserver configured) and browse to Configuration->System Properties->Platforms. If the server is here, remove it, if not, just hit Save (very important).
If this is your first AM and is a first installation you can just get rid of the Directory Server suffix and recreate it with the Top Entry alone.
Edited by: flistello on Mar 27, 2008 4:30 PM

HDD problem on IDE 2 (or IDE3)

Hi,
I have a problem with my HDD. It's not recognize in the bios when i plug it to the IDE 2 or 3. I have my burner and my dvd on the IDE 1.
What can i do ??? It's a problem to have a HDD and a CD driver on the same nap ???
THx a lot for the answer.

False.
Some optical devices will only work (or work more reliablyt) if only on the end connector.
Others like to be on the middle connector. That's true even if you have the jumpers set for the correct position on the cable.
So, for example, if you have two optical that like to be on the end, you might have problems with one in the middle, even if the jumpers are set correctly.
Thats why i suggested you try with just one optical.
You may be able to eventually get everything sorted out but it is much better to get your system up and running with the HDD on IDE1 and one optical on IDE 2.
When that works reliably, you can then experiment with adding the second optical back in and find the position for it that results in the most stable system.

Funny problem - any ideas ?

Hi Folks,
I'm seeing a funny issue and running out of ideas, any help would be appreciated.
Here is a pl/sql block :
declare
ctr number := 0;
ctr1 number := 0;
begin
insert into TableT ( x, y, z)
select <3 columns> from table1, table2, table3, table4, table5
where <join conditions for tables 1 thru 5> ;
-- this inserts 67xxx records. This number varies randomly during runs, no two runs return the same number e.g 67258, 67120, 67118 etc
for rec in (
select <3 columns> from table1, table2, table3, table4, table5
where <join conditions for tables 1 thru 5> ) loop
ctr := ctr+1;
end loop;
dbms_output.put_line(ctr); -- shows the right number that should be returned by the select query i.e. 67105 EVERY time its run
select count(*) into ctr1 from table1, table2, table3, table4, table5
where <join conditions for tables 1 thru 5>
dbms_output.put_line(ctr1); -- shows the right number that should be returned by the select query i.e. 67105 EVERY time its run
end;
/The query in the for loop is an exact cut-paste job from the query in the insert.
Theres nothing special about tableT its just a straight create table with NO clauses other than column definitions all of which are number,varchar2(20) and date specified at creation time, no constraints, no triggers. DB is 11.1.0.7 if thats relevant.
I've racked my brains, cant think of a reason for this. Any ideas ?
TIA !!!!
Edited by: 980084 on Jan 5, 2013 8:20 AM
Edited by: 980084 on Jan 5, 2013 8:32 A

980084 wrote:
Hi Hoek,
Thanks for your reply, I cant really demonstrate the problem with test data since if I create new test tables and sample data, the problem does not show up.
I'm really looking for suggestions of areas to look into, I understand you can't point out the actual problem with what I've posted.
NormHi Norm,
Too bad you cannot reproduce the problem. It raises more questions and guesses/speculations which is the opposite of what you're looking for.
Are you getting the problem in an 'isolated environment' (are you the only one doing DML, is this a test database or...)?
How did you determine the number of rows inserted through your SQL approach (INSERT...SELECT)? SQL%ROWCOUNT?
Any triggers on table1..5?
Your example seems to be narrowed down a bit too much, expecially since you cannot reproduce when you try to recreate the problem.

Scrollbar problem - any ideas?

I know another scrollbar problem...ive read the posts but cant solve it. Anyone got any ideas?
got a program called Map which draws a map (using paint()) of a web site. I can get it to work but often there are so many links they go off the page.I need a scrollbar.
In main i set up a frame: JFrame frame=new JFrame("M");
Then set up scrollbar: JScrollPane cf = new JScrollPane();
cf.setHorizontalScrollBarPolicy (JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS );
cf.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS );
Then add scrollbar to frame: frame.getContentPane().add(cf);
Then add Map() - my main prog: cf.add(new Map());
(Map constructor calls repaint() - paint method draws to screen. main program extends JComponent)
All i get is a blank (grey frame) with a scrollbar :) ...doesnt show Map - paint
I can ignore scrollbar and use a container instead -
Container c=frame.getContentPane()
then set its layout : c.setLayout(new BorderLayout());
and add Map() to it : add(new Mapper(),BorderLayout.CENTER);
It works fine - but i need a scrollbar...
Thanks for your time&help

Hers the code for my main Mapper program (which is loaded first) and the Scan program(below).I know the structures all over the place+thats the problem. I would like a scrollbar. Also everytime i scan a new window opens, it would be good if only 1 ever opened.Ive been fiddling for days and am lost.Can anyone sort it out? I think the codes ok, just needs restructuring...
The main Mapper program :
package project.e;
import javax.swing.*;import java.awt.*;import java.awt.geom.*;import java.awt.event.*;
import java.io.*;import java.net.*;import java.lang.Math.*;import java.util.*;
public class Mapper extends JComponent{
static int w = 1000;
static int h = 1000;
static String [] Lnks = new String [5000]; //Lnks
public Mapper()
{ repaint();}
public void paint(Graphics g){
Graphics2D g2D=(Graphics2D)g;
Toolkit tk = Toolkit.getDefaultToolkit();
Image img = tk.getImage("c:/windows/desktop/project/e/wirecube.gif"); //setup images
Image rimg = tk.getImage("c:/windows/desktop/project/e/bwirecube.gif");
int ww=(w/2);int hh=(h/2);
g2D.setFont(new Font("Times New Roman", Font.PLAIN,12));
g2D.setPaint(Color.cyan);
g2D.drawString("Web Page Scanned : ",10,50); g2D.drawString(Scan.url,120,50);
g2D.drawString("Total Links Found : ",10,100); g2D.drawString(String.valueOf(Scan.x),120,100);
g2D.drawImage(rimg,ww-88,50,this); g2D.setFont(new Font("Times New Roman", Font.PLAIN,12));
g2D.setPaint(Color.green);
g2D.drawString(Scan.url,ww-88,50);
int a=w/5;
int up=0;
int lx=0;
g2D.translate(ww,hh);
g2D.translate((-ww-a)+10,-300);
for (int i=0;i<(Scan.x);i++){ //loop - drawing all (5 per line)
if (lx==5){g2D.translate((-ww-ww),100);lx=0;} //every 5 times
g2D.translate(a,0);
g2D.drawImage(img,0,0,this); //img
g2D.setFont(new Font("Times New Roman", Font.PLAIN,12));
g2D.setPaint(Color.green);
g2D.drawString(Lnks[up],ww-ww,hh-hh-10); //URL
if (Scan.tl==true){g2D.drawString(Scan.IorE[up],ww-ww,hh-hh-25);}lx=lx+1;up=up+1;}}
public static void main(final String [] args){
System.arraycopy(Scan.Links,0,Lnks,0,Scan.x);
JFrame frame=new JFrame("Mapper"); //frame setup
JMenu menu = new JMenu("Menu");
JMenuItem scan = new JMenuItem("Scan");
scan.setMnemonic(KeyEvent.VK_S);
scan.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_S,Event.CTRL_MASK));
scan.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){Scan.main(args);}});
//call Scan
JMenuItem downloadLink = new JMenuItem("download-Link");
downloadLink.setMnemonic(KeyEvent.VK_L);
downloadLink.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_L,Event.CTRL_MASK));
downloadLink.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){GetLink.main(args);}});
JMenuItem downloadImage = new JMenuItem("download-Image");
downloadImage.setMnemonic(KeyEvent.VK_I);
downloadImage.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_I,Event.CTRL_MASK));
downloadImage.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){GetImage.main(args);}});
JMenuItem Quit = new JMenuItem("Quit");
Quit.setMnemonic(KeyEvent.VK_Q);
Quit.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_Q,Event.CTRL_MASK));
Quit.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){System.exit(0);}});
JMenuBar menuBar = new JMenuBar();
menu.add(scan);
menu.add(downloadLink);
menu.add(downloadImage);
menu.add(Quit);
menuBar.add(menu);
frame.setJMenuBar(menuBar);
Container c = frame.getContentPane();
c.setLayout(new BorderLayout());
c.add(new Mapper());
c.setBackground(new Color(0,0,0));
frame.setJMenuBar(menuBar);
frame.setBounds(0,0,w,h);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);}}
Scan :
package project.e;
import java.awt.*;import java.awt.geom.*;import java.awt.event.*;import javax.swing.*;import javax.swing.text.*;import javax.swing.text.html.*;import java.io.*;import java.net.*;
public class Scan{
static String [] Links = new String[5000]; //array of links
static String [] IorE = new String[5000]; //array - Internal or External
static int x = 0; //length
static String url = new String(); //url
static String type = new String(); //link/image
static boolean tl;
static String l = new String("links");
static String i = new String("images");
public static void main(String [] args){
Links = new String[5000]; //need to repeat ini. for rescanning
IorE = new String[5000];
x = 0;
url = new String();
type = new String();
EditorKit kit = new HTMLEditorKit();
Document doc = kit.createDefaultDocument();
doc.putProperty("IgnoreCharsetDirective",Boolean.TRUE);
try{
type = JOptionPane.showInputDialog(null,"Please enter file type to scan for - links / images ");
url = JOptionPane.showInputDialog(null,"Please enter URL"); //get url (var.) to map - dialog box
Reader rd = getReader(url); // Create a reader on the HTML content
kit.read(rd, doc, 0); // Parse the HTML.
ElementIterator it = new ElementIterator(doc);
javax.swing.text.Element elem;
while ((elem = it.next()) != null){
if (type.equals(l))
tl =true;
//int bol = url.indexOf(".com");
SimpleAttributeSet s = (SimpleAttributeSet)
elem.getAttributes().getAttribute(HTML.Tag.A);
if (s != null)
Links[x]=String.valueOf((s.getAttribute(HTML.Attribute.HREF)));
String tmp = Links[x].substring(0,1);
if (! tmp.equals("h")){
if (! tmp.equals("/"))
{Links[x]="/"+Links[x];}} //if string doesnt start with h or /                                    //then add a / to start
if (Links[x].startsWith("/")){System.out.println("Internal Link");IorE[x]="Internal Link";} //if starts with / then internal
else{
if (Links[x].startsWith(url)){System.out.println("Internal Link");IorE[x]="Internal Link";} //else if starts with url then internal
else{
String tmp3 = url.substring(11); //else if contains url - (http://www.) eg. 123.ibm.com then internal
int b=0;
b=Links[x].indexOf(tmp3);
if (b>0){System.out.println("Internal Link");IorE[x]=("Internal Link");}
else{System.out.println("External Link");IorE[x]=("External Link");}}} //else must be external (doesnt start with / or url or contain middle bit of url)
System.out.print("Link : ");
System.out.print(x);
System.out.println();
System.out.println(Links[x]);
System.out.println();
x=x+1;
if (type.equals(i))
tl=false;
if ( elem.getName().equals( HTML.Tag.IMG.toString() ) ){
Links[x] = String.valueOf(elem.getAttributes().getAttribute( HTML.Attribute.SRC ));
System.out.print("Image : ");
System.out.print(x);
System.out.println();
System.out.println(Links[x]);
System.out.println();
x=x+1;}
Mapper.main(args);
}catch(Exception e){e.printStackTrace();}
static Reader getReader(String u) throws IOException{
if (u.startsWith("http:")){
// Retrieve from Internet
URLConnection con = new URL(u).openConnection();
return new InputStreamReader(con.getInputStream());}else{
// Retrieve from file.
return new FileReader(u);
Also got 2 extra - GetImage & GetLinks...they just go away and do there own stuff...no painting required so cool.The probelms is between Mapper+Scan...
Thanks for your time&help
Oly

Problem in IDES

Similar Messages

Maybe you are looking for