Problem in idoc status

Hi Abapers,
In our project some of the invoice idocs are not posted into SAP..but all the segment's data are uploaded into the respective structures..but still the staus is in 51 only..i can't find the reason behind this..can u give me solution for this?

Hi,
You can find the error reason when you open the status records and double click on the 51 status text box.
Check what was error thrown there and then correct the same and reprocess the idoc again, then it will get through.
Thanks,
Mahesh.

Similar Messages

IDoc status 53 in employee replication from SAP HR

Hi experts,
We are having some problems in CRM BP creation with role employee.
We are using CRM 5.0 and SAP ECC 6.0 and we are trying to replicate employees information to CRM from HR.
After read the notes 934372, 615896, 550055, 363187, 312090 we made the next configuration steps in our systems:
R/3:
- Creation of connection port (trans. WE21)
- Creation of logical system (trans. WE20) and assignment of outbound message HRMD_ABA
- Creation of distribution model (trans. BD64) with all filters indicated in note 312090
CRM
- Creation of logical system (trans. WE20) and assignment of inbound message HRMD_ABA
- Creation of conversion between basic types HRMD_A05 and HRMD_ABA01 (trans. WE70) as described in note 312090
- Creation of conversion between message types HRMD_A and HRMD_ABA (trans. WE73) as described in note 312090
- Creation of external number range ZE from HR01200001 to HR01299999 (using PA04 in R3 we found the number range between 01200001 and 01299999)
- Creation of BP Grouping with the same name of number range (ZE) checked to be external too
- Update of table T77S0 (using SM30):
HRALX HRAC X
HRALX PBPON OFF
HRALX PBPHR ON
HRALX PBPON ON
HRALX PNUMB 3
HRALX PPROL BUP003
HRALX PSUBG ZE
PLOGI PLOGI MV
We know we should have the same value in R3 and CRM for PLOGI/PLOGI, so we created in CRM MV because that is the plan version used in R3. To create it, we just manually add a new row in table T778P and then selected it in table T77S0. Is this the correct way to create a plan version?
After these steps, in R3 we execute program RHALEINI with parameters:
- Plan version = MV
- Object type = P
- Object ID = an active employee
- Reporting period = all
- Transfer mode = Insert
- Receiving system:
Receiving partner No = DCRCLNT300 (logical system created in WE20)
Message type = HRMD_ABA
And everything looks fine in R3.
In CRM, using trans. WE05, we can see that the iDoc is created, apparently without problems with status 53 - "Applicaton document posted" but the business partner is never created.
Did we miss some configuration steps?
Should we do something more after see the iDoc in CRM to create BP?
Thanks in advance.
Alda

hi pratk bhai,
ya i have done the same setting what Ada has mentioned eariler,
and as of your suggestion to maintatin the mandatory infotype, i have even done tht,
after running RHALEINI in R3, the status is all green here.
when i run the tcode BD87 to check the Idoc status its showing fine (Error free).
now, through tcode se38 the report CRMHRALE_CENTRAL_PERSON shows all the employees as status green,,
but the partner number is not getting generated. ( i have used HRALX-PNUMB= 3 (Prefeexing the number range coming from R3)).
kindly advice me what should be done in order to generate a BP number for the replicated HR Employee.
best regards,
Madhup

IDOC status 03 but no XML generated

Hi Experts,
I am facing a problem related to idoc i.e. I am getting idoc status 03, still no XML created at the server directory.
Scenario is: A custom idoc is created with a z report which selects data & send idoc as an XML file in the server directory
IDOC (the first \ represents root as it is a unix server, 2nd \ is a saparator nd then IDOC is a folder to save XML files). Folder IDOC is having all permission(777). When i send idoc using the report is fives status 30 & after that when process it through BD87 it gives a status message 03.
I checked the partner profile, port etc. Even in port access test is OK.
I even tried putting directory as //IDOC , /IDOC but then no access possible error came. only work with
IDOC & gives status message 03.
But no idoc is reaching at the other end i.e.
IDOC.
Can anyone tell me how to fix this problem. Is the problem at SAP end of Unix end.
Regards,
Nik

Hi,
Check the Port configuration.In this case mostly problem form port configrations only.
Check Directory,Outbound file paramters in the port configuration.
Thanks,
radha.

Idoc status is in 12, but it does not reached to Target.

Hello Experts,
We are facing a problem with outbound Idoc.
The problem details are as below.
We have generated an Idoc(Without message Control) and dispatched it to external vendor. Idoc status is 12, when we check it in midleware(seebeyond) it does not reached.
There is no error with RFC and Port definition.
Could you please suggest us whats wrong with it or where its gone.
Thanks in advance.
BR//
Raghu

Hi Siva Prakash,
Thanks for your response.
There is no error with RFC, its working perfectly.
BR//
Raghu

Problem sending IDOC DESADV /AFS/DELVRY03 to XI

Hi Gurus,
I have problems sending IDOCs DESADV (basic type /AFS/DELVRY03) created by function LSEND_IDOC to XI system. IDOC is correctly created by R3 system (AFS ECC 5.0) and correctly sent on the XI port (Status: Data passed to port OK - 03), but XI system doesn't receive IDOC.
If I resend the same IDOC by WE19 tcode goes ok!!
In R3 sending system nothing warnings/errors in syslog or sm58.
Any suggests? Thanks in advance.

Issue solved! It is necessary close the master idoc with a commit

IDOC status "Message scheduled on outbound side"

Hi,
I am working on scenario file->XI->SAP R/3(Using IDOC). I am getting outbound status of IDOC as "Message Scheduled on Outbound side". When I go and see SM58 for user WF-BATCH there exists a entry with status Transcation Recorded". In SM58 if I manually click Execute LUW then only I am getting an IDOC posted in my R/3 box, but this should happen automatically.
Can any one tell me what should I do so that it gets executed automatically?
Thanks In Advance.
Yaseen Mahammad.

Most of the time it is because of the Queues and Logical system. I,e If there is no proper logical systems are created/maintained then it will give problem.
And it also depends on the rfc Dialog users.
Just check this thread-
Problem with IDOCS
Also check in the IDX1 entry...
Thanks,
Moorthy

Idoc status green but data not posted correctly to destination system.

Hi,
Can anyone help me out with idoc problem that I am facing.
The problem has come out with outbound idoc.
The status of the idoc is green when it has been sent but the objects that has been sent with that idoc are not getting posted in the destination system.Some of them are posted correctly but some of them are not.
What may be the reason behind this.
Regards,
Rachana.

Good morning
What was the resolution here? We are siitng with the same problem, but IDoc's are correct, but data packet not processed.
Thanks, have a nice day
Cj

Inbound Processing of iDoc Status Message

Silly me - I thought this would be simple ...
I am currently changing our bank interface from a customized ABAP solution to use more standard SAP utilities (particularly iDocs). I have the configuration set up to use the PAYEXT message type sending PEXR2002 iDocs to a file port. Our bank is receiving these documents and is returning an iDoc status message containing the status of each payment iDoc that they received from us.
My problem is that I can't figure out how to get these status iDocs to update the status of the corresponding PEXR2002 iDoc.
I am trying to execute an RFC interface to apply these status messages to my system using the following OS command:
D:\usr\sap\VPR\SYS\exe\uc\NTAMD64\startrfc.exe -3 -d RT2 -u xxxxxx -p xxxxxx -c 220 -h SPR32K36 -s 00 -F EDI_STATUS_INCOMING -E PORT=ZFI_INT003
The error message that I receive when this is run is:
RFC Call/Exception: SYSTEM_FAILURE
Group             Error Group 104
Key                RFC_ERROR_SYSTEM_FAILURE
Message        Status record 1 is invalid (TABNAM: 'EDI_DC40')
The port (ZFI_INT003) is the file port that is configured for the outbound file. in WE20, this port has the "Status File" tab set to use the logical file name where the status file is being stored on the server. the startrfc command is connecting to the SAP system and opening the status file. I'm not sure where I'm going wrong here.
Can someone please help get me pointed in the right direction? I've obviously missed something here.
Thanks,
Glen

Hi,
call function modules:
EDI_DOCUMENT_OPEN_FOR_PROCESS
   EDI_DOCUMENT_STATUS_SET
   EDI_DOCUMENT_CLOSE_PROCESS
kind regards,
HP

IDOC Status 68 & 51

Hi,
There is an IDOC with status 68 (Error - no further processing) , Earlier it was in status 51 with the status text "INVALID DATE' .
How to find out for which particular date field's the error is being thrown..?? what is the approach to find out the root cause of the issue.?? the IDOC is being sent to R3 through XI.
Plz give suggestions on how to tackle the issue.
Thanks in advance,
Jai

Hi ,
The idoc Status for 59 and 51 for indound idoc is....
68 Error - no further processing
51 Application document not posted
the possible solution is checkthe Partner profile for the Idoc and Port number..
and go to T_code we20 and check the Partner.and check the Syntax in the application tool bar...
then you will come to know the problem..
Regards,
Prabhudas

Any BADI returning the 'IDOC Status' during IDOC generation.

Hello All,
I need a BADI which is being called during any IDOC generation and which returns the 'IDOC Status' i.e. Pass/Fail etc.
So far I am able to find BADIs like 'IDOC_DATA_MAPPER' or ''IDOC_DATA_INSERT'' but such BADIs only return the IDOC document number.. they do not return any information on IDOC Status (the field Status field remains blank).
Can any one suggest some solution on this please.
Regards
Vikas Gupta

Hi Erik,
Thanks for your reply, though i was able to get the status from BADI IDOC_DATA_MAPPER itself (earlier there were some config issues...which were creating some problems) but thanks for letting me know about table EDIDS, it helped at places.
Regards
Vikas Gupta

IDOC Status 26: EDI: Syntax error in IDoc (segment cannot be identified).

Hi All,
I have created IDOC extension for IDOC Basic type "PROACT01" and have followed all required necessary steps but getting IDOC
Status 26. EDI: Syntax error in IDoc (segment cannot be identified). The exact error is:
Please check Error Details and the details of the steps I followed for Setting up IDOC Extension:
Error Detail :
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment ZPROSEG does not occur at the current level of the basic type PROACT01 (extension PROACTEX).
This error can have several reasons:
The segment ZPROSEG is assigned to a group whose header segment does not occur.
The segment ZPROSEG does not exist in the syntax description of the basic type PROACT01 (extension PROACTEX).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type PROACT01 (extension PROACTEX).
Can you please look at this problem and suggest what is wrong with IDOC Extension/Custome Segment?
Below is the Details of the Steps which I have followed:
1. Tcode WE31 - Created new custom Segment ZPROSEG with 4 fields. Released segment.
2. TCode WE30 - Created IDOC Extension PROACTEX for Basic Type PROACT01. Released IDOC extension.
Here when I run syntax check warning appears "No predecessors exist". I am not sure if its okay!!
3. TCode WE82 - Added Extension PROACTEX in the Message Type PROACT with BASIC Type PROACT01.
4. TCode WE20 - Added IDOC Extension PROACTEX in the predefined partner profile in WE20 transaction.
5. Added the following code in the Customer Exit EXIT_SAPLWVMI_001 include ZXWVMIU01 .
DATA segnam(27).
READ TABLE dedidd WITH KEY segnam = 'ZPROSEG'.
IF sy-subrc NE 0.
LOOP AT dedidd WHERE segnam = 'E1EDP31'.
CLEAR dedidd.
dedidd-segnam = 'ZPROSEG'.
zproseg-matnr = 'Mat1'.
zproseg-lgort = '001'.
zproseg-gernr = 'SNo1'.
zproseg-labst = 2.
dedidd-sdata = zproseg.
APPEND dedidd.
ENDLOOP.
ENDIF.
Finally ran transaction WVM2 (Transfer of Stock & Sales Data) to generate IDOC, its creating IDOC but when checked IDOC in WE05 its getting Status Error "26".
Looking forward for your reply.
Many thanks in advance.

Hello,
Actually you are appending the Z segment instead of inserting into the correct position. So the segment is added at the last, so hierarchy of segments is collapsed.
So get the index of the previous segment E1EDP31 and increase the index by 1 and INSERT the Z segment with that new index as below.
LOOP AT dedidd WHERE segnam = 'E1EDP31'.
lv_index = sy-tabix. " <<--
ADD 1 TO lv_index. " <<--
CLEAR dedidd.
dedidd-segnam = 'ZPROSEG'.
zproseg-matnr = 'Mat1'.
zproseg-lgort = '001'.
zproseg-gernr = 'SNo1'.
zproseg-labst = 2.
dedidd-sdata = zproseg.
*APPEND dedidd.
INSERT dedidd INDEX lv_index. " <<---
ENDLOOP.
Here actually we are insering the record inside the LOOP and it regenerates the index again. It is not actually a good practice.
So the best practice is get the index and generate the segment inside the loop, store them into another internal table, come out the loop and insert the Z segments into DEDIDD by looping the new internal table.

IDOC status 52 - Document not fully posted

Hi all,
On transferring HR data from R/3 to CRM shows two IDOCs, one which is posted- status 53, and the other with status 52 - document not fully posted. IDOC details show that central person for employee and relationships could not be created. The org. structure is replicated but employees are not.
Now there seems to be a reason behind this, this is the second time I am having problems with IDOCs during HR/CRM integration I have had the same problem when earlier a system client copy was taken and faced the IDOC transfer problem in the copied client. In fresh installations the integration works fine. Are there any system buffers to be refreshed or anything else on the technical side or am I missing settings on the CRM side ?
Please help ASAP.
Regards.
PS: the RFC's are working fine as well and already gone through note 550055

Dear Haseeb,
Thanx for your quick response.
For an employee(18730) 1st idoc has been generated on 03.06.2013 from ECC to CRM with these infotypes data (0,1,105) but idoc status is 52, and again changed on 04.06.2013 infotype (2) and idoc hase been generated but status is 52 in CRM and same again changed on 06.06.2013 infotype (6) and idoc hase been generated but status is 52 in CRM. But still Business partner has not been created in CRM.
We are facing for few employees related this issue.
I have been checked SLG1 and WE02 in both ECC & CRM, Please find the attached screen shots for your kind reference.
Please let me know is any other process to solve my issue.
Thanks & regards
Rajasekhar S

Idoc status 51 after 53

Hi,
I have the following scenario, we are getting the file to sap and the file data needs to be updated in to sap. we had custom inbound idoc processing program which will load the data into sap. the problem is idoc should have status for each main segment of the idoc. lets take if we have 10 main segments then 10 status should be there in the idoc status so that user will varify which record in the file failed or errored out. The issue is if 9 records updated successfully and last record in the file failed while updating the idoc should have status like (53,53,53...(9 times) and at the end it should 51) when i debugged i found the same result but after this custom inbound fm standard process is replacing all the status messages with 'Status records with status 51 after status 53'.
In reverse way if i have 9 failed and last one successful then i can see (9)...51s and 10th one as 53) but if last record failed then getting 'Status records with status 51 after status 53'. Could any one faced this kind of situation please let me know.
Thanks in advance.

No matter how many 53's you have, if you have one 51(order doesnt matter) the Final Idoc status will be 51. If you want the idoc to be successfully processed all messages should be 53.
Or you have to develop the reproccessing logic to process only the failed entry and then make it 53.

IDOC status 64 not getting processed.

Hi Gurus,
      I have a problem where IDOC's with status 64 are not getting processed via background job. the IDOCs weere getting processed with the background job till today evening, but suddenly no changes were made and the processing of IDOC's with status 64 has stopped and they keep filling up, when i checked the log of the Background job it says finished, and the log has the following information,
17.09.2009 19:05:23 Job started                                                                   00           516          S
17.09.2009 19:05:23 Step 001 started (program RBDAPP01, variant POS_IDOCS, user ID SAPAUDIT)      00           550          S
17.09.2009 19:05:25 No data could be selected.                                                    B1           083          I
17.09.2009 19:05:25 Job finished                                                                  00           517          S
Kindly advise on this.
Regards,
Riaz.

When i process the IDOC's using BD87, they gets processed wiwth out aany issues no dump is displayed, idoc gets a status 53 after processing via BD87.
There is another problem how ever there are other jobs scheduled to run in the background other than this background job which are getting cancelled and have two different error logs for different jobs they are as follows.
1) 18.09.2009 02:00:06 Job started                                             00           516          S
18.09.2009 02:00:06 Logon not possible (error in license check)             00           179          E
18.09.2009 02:00:06 Job cancelled after system exception ERROR_MESSAGE      00           564          A
2) 18.09.2009 00:55:27 Job started                                                          00           516          S
18.09.2009 00:55:27 Step 001 started (program RSCOLL00, variant , user ID JGERARDO)      00           550          S
18.09.2009 00:55:29 Clean_Plan:Gestartet von RSDBPREV                                   DB6PM         000          S
18.09.2009 00:55:29 Clean_Plan:beendet                                                  DB6PM         000          S
18.09.2009 01:00:52 ABAP/4 processor: DBIF_RSQL_SQL_ERROR                                00           671          A
18.09.2009 01:00:52 Job cancelled                                                        00           518          A
This is a production server and the Licence is valid till 31.12.9999, and has no issues with the license.

IDoc Status "& & & &" in IDoc posting in BD87 - ALE

hi,
I am integrating two R3 servers and posting the datas from HR to cProjects server.
In Outbound I can send the IDocs and In Inbound IDocs are getting into destinations (cProjects) servers along with status "& & & &" in BD87.
Can anyone help me to know..Where the cause of problem..
Thanks in advance
Regards,
Srinivasan.R

Hi.,
In we02 its OK..
Its showing ...
Status Message for Selected IDoc
Status Text:   IDoc: 0000000000036306 Status: IDoc ready to be transferred to application
T100 Text:     No filters , No conversion , No version change .
But., in place of BD87 I am getting status only "& &, &, &".
Regards,
Srinivasan.R

Problem in idoc status

Similar Messages

Maybe you are looking for