Problem in Idoc to JDBC scenario(uses BPM)

Hi
I have a IDoc to JDBC scenario which also uses BPM.
The JDBC adapter has to execute a Stored procedure on Sybase database.
I work on XI3.0 SP14.
When I am sending IDoc to XI it is failing in CALL adapter step.
The error message is "Unable to convert sender service TruckLiftAccountUpdate to an ALE logical system".
However this scenario is working in Production with same settings.But it is not working in Quality and it is giving the above error.
Can any one help me in this.
Thanks in advance.
KP

Thanks for your quick reply..
All the settings are in place.
Here the Idoc is coming to BPM and BPM cant able to execute the stored procedure.and we are getting the error from BPM to target system.
Here error is unable to convert the sender service(from BPM service) to ALE
logical system.
same settings are there in Production but it is not working in QA.
Thanks in adavnce,
KP

Similar Messages

Alerts-Idoc to File Scenario using BPM

Dear all,
At the sender side,I am sending 2 Idoc's orders03,orders04 Idocs I am Merging in to single at my mapping level and sending to the respective receivers.
When even some error occurs at system level or application level,an alert must be sent to the respective valid receipents.
My question is,when creating the Alert Rule how to use the interfaces(orders03,04) (here I have multiple senders).
Is Alert rule required in BPM scenario's?if not let me know how alerts would be triggered for bpm scenarios.
Thanks,
Srini

Hi,
Let me see if I had you requirement correct.
When the Idoc is sent from R3, sender partner type is LS and Receiver Partner Type is LI.
If yes,
1. Create a Party in ID.
2. The Agency , Scheme and Identifier will have values,
Agency --> Receiver Business System name or Business Service Name to be used for File.
Scheme --> ALE#LI
Identiier --> Value of the RCVPRN field in the idoc control Record. Basically the Receiver Partner Name.
All the Configuration In ID will use this Party as the Receiver Party and the corresponding Service asthe Receiver service.
No need for a sender party as sender partner is LS.
Regards
Bhavesh

Idoc to jdbc scenario problum in queue ?

hi experts
I am facing a problem in IDOC to JDBC Scenario (PI 7,1) . When i trigger the idoc first time it is inserting in to the data base . when i trigger second and third time struck in the queue .By default the quality of service it is taking EOIO,
My question is :
1. How to clear the Queue ? and is there is any method it automatically release the queue ?
2. How to change the QOS EOIO to EO .(i don't find any option at jdbc adapter level to give QOS ) ?
Thank You
G.Praveen Kumar

Hi,
>>1. How to clear the Queue ? and is there is any method it automatically release the queue ?
To Re-process Automatically
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
>>2. How to change the QOS EOIO to EO .(i don't find any option at jdbc adapter level to give QOS ) ?
For any Adapter, Receiver side QOS option wont be there. Sender side only will be available.
As soon as you trigger the Idoc from ECC, this will be sent to receiver in the Idoc generation order only
REgards
Seshagiri

File to IDOC Scenario using BPM

Hi Experts,
    I am working on file-Bapi-Idoc scenario using BPM.
    I have two conditions
1. If the Sonumber is populated then need trigger an Bapi_change
2.If the Sonumber is not populated from the file then need to trigger a Bapi_Createfromdat to create the sales order and receive the salesorder number as response from Bapi
and the response of these BAPIs should be validated whether the Bapi is successful or not.
If it is successful message then need to trigger IDOC or else should throw an alert message.
let me know the steps involved in this scenario.
can i send alert message to other email IDs or can i send it to only XI admin?
Please let me know u r inputs.
Thanks in advance
Praveen

Hey,
You need to have a BPM for this.
BPM design.
Recieve step(abstract asynchronous) for file structure
Switch Case(condition whether sonumber is populated or not)
if populated
Branch 1(of switch)
    transforamtion step:- mapping between File and Bapi_Change(Request structure)
Send step(abstract syncronous) To send the BAPI_change
Branch 2(of switch)
transformation step:-mapping between file and BApi_Create
Send step(abstract synchronous) To send the BAPI_Create
Block step(which will include the Switch step)
    trigger an Execption in case of an error(in any of the two branches) through the block
    The Exception will trigger an alert.
Now after the Block step there will be a transformation step(which will have the mapping between RFC response and Idoc)
Next is the send step(abstract asynchronous) for the idoc
In case if there is no exception the Idoc will be triggered or the exception branch will trigger the alert
rewards points if useful
regards,
      Milan

IDOC-XI-JDBC scenario, jdbc sent too slow

i have a IDOC-XI-JDBC scenario,
the problem is that near 5 Lac IDOC is sent to XI, each IDOC is processes by an instance of the scenario, and the sent to the Database is too clow...means 4000 records per hour,
can i configure the JDBC receiver adapter in a way, so that it becomes faster/more concurrent,

Hey,
First raise the issue to the DBA he might help resolve the ISSUE more efficently.
Secondly check in the JDBC adapter -> Adavance mode -> Disconnect from the data base after processing each message shouldn't be set.
Even check with Database Transaction Isolation Level -> default is value of the connected database.
The isolation level determines how transactions running in parallel can influence each other
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Why not the other way around > Collect multiple idocs in a file restrict maxium number of idocs to required value then send the file ?
Stefan Grube Example:
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
if it is with bpm then collect multiple idoc with occurance change and send them.
Cheers,
*RAJ*
**REWARD POINTS IF FOUND USEFULL

Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario

Dear all,
i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
Is there a way to pass these acknowledgements to the IDoc status record?
In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
Many thanks and best regards
Florian

Is there a way to pass these acknowledgements to the IDoc status record?
Without BPM, No.
So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
What if I deactivate the acknowledgement request in the NOALE programm?
Then u won't have any ALEAUD message at sender R3.
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
No
Regards,
Prateek

PI : Idoc to JDBC scenario : repeating segments mapping issue

Experts
Please help.
Question reg. mapping for ECC idoc to JDBC scenario.
I am using the ORDRSP idoc which has multiple segments as below.
IDOC -> multiple E1EDK14 segments with 2 fields (QUALF and ORGID)
Depending on the value of the QUALF field i need to populate the column in my target structure.
QUALF 001 => Colmn a
QUALF 002 => Colmn b
For now my graphical mapping is very simple - QUALF => column a (done just to find out how PI mapping works)
What happens in my case, is the PI Payload shows all the E1EDK14 segments however only the value 006 present in the first occurence goes into the target column.
How do I repeat a mapping between QUALF and target col. for multiple occurences of the same segment?
Please can you guide me reg. use of context, loop over segment, UDF = which will be the best solution to achieve this?

Hi
My mapping is as below. I will take an example of a sales order that has 2 line items 00010, 00020. The payload is as follows
I see this payload in the SXMB_MONI transaction => Receiver grouping => Payloads
- <ZORDRES>
- <IDOC BEGIN="1">
+ <EDI_DC40 SEGMENT="1">
+ <E1EDK01 SEGMENT="1">
+ <E1EDK14 SEGMENT="1">
<QUALF>006</QUALF>
<ORGID>01</ORGID>
</E1EDK14>
+ <E1EDK14 SEGMENT="1">
<QUALF>007</QUALF>
<ORGID>01</ORGID>
</E1EDK14>+ <E1EDK03 SEGMENT="1">
+ <E1EDK03 SEGMENT="1">
+ <E1EDK03 SEGMENT="1">
+ <E1EDK03 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDK02 SEGMENT="1">
+ <E1EDK02 SEGMENT="1">
+ <E1EDK17 SEGMENT="1">
+ <E1EDK18 SEGMENT="1">
+ <E1EDK18 SEGMENT="1">
+ <E1EDP01 SEGMENT="1">
<POSEX>000010</POSEX>
+ <E1EDP01 SEGMENT="1">
<POSEX>000020</POSEX>
</E1EDP01>+ <E1EDS01 SEGMENT="1">
<SUMID>001</SUMID>
<SUMME>2</SUMME>
</E1EDS01>
+ <E1EDS01 SEGMENT="1">
<SUMID>002</SUMID>
<SUMME>1100.00</SUMME>
<SUNIT>GBP</SUNIT>
</E1EDS01>
</IDOC>
</ZORDRES>
There are 2 problems. First one which I discovered after posting the query. I can see only the line item 10 in the query that gets contructed in PI to insert the data into the target jdbc table. Please see jdbc receiver communication channel log below
If you see above there are 2 E1EDP01 segments for line 00010, 00020.
INSERT INTO tblOItem (IDocDate, IDocTime, SalesOrderNo, ItemNo, Plant, ItemCategory, UnitSellPrice, QuantityOrdered, QuantityAllocated, ScheduledDeliveryDate) VALUES (20111206, 135530, 0015002085, 000010, 0086, ZTAN, 0.00, 1.000, 1.000, 20111201)
My source and target mappings are as below.
ZSALORD
 IDOC
 BEGIN
 E1EDK01
 E1EDP01
 POSEX =============> SalOrdItm table column itemno
My target side structure (idoc to jdbc scenario is as follows)
I have mapped the E1EDP01 to Statement - I thought this will build one query per line item (per occurence of E1EDP01) but this is not working.
MT_OITEM
Statement
 dbtablename ============> SalOrdItm
 action =================> Insert
 table
 access
 Itemno (this is one of the columns from the table)
The occurence of E1EDP01 is 0..9999999 while the occurence of Statement node is 1...unbounded.
Please is there any email address where I can send you screen shots if the above is not clear.
I need to get this interface delivered as soon as possible but am STUCK.
Edited by: gary jojo on Dec 6, 2011 3:06 PM

IDOC to JDBC :Error using JDBC

Hi Frnds,
My scenario is Idoc to JDBC scenario, I am getting the follwoing error while trying to process an idoc. Please help me in hadling this error.
Error Message:
JDBC message processing failed; reason Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://180.1.32.194:1433;DatabaseName=CZZ03;': SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
Regards,
Shiv

Hello Shiva,
Are you installed JDBC Drivers?
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
Thanks,
Satya Kumar
Reward if it is usefulll

IDOC to JDBC scenario in case of Cost Element Group IDOC.

This is an IDOC to JDBC scenario.
The Cost Element Group IDOC is having different segments. The main segment E1COGH (1...unbound) is consisting of different subsegment like E1OGS (0...unbound) & E1COGV (0...unbound). The main segment (E1COGH) along with subsegments E1OGS & E1COGV) is occuring more that 1 times. I have to insert data into the table, which we can do in single rows (no hierarchy is possible in tables). I have used "use one as many" in message mapping. Now if E1OGS or E1COGV is repeating in a single E1COGH segment then we dont get any error. But if I duplicate the main segment then I am getting runtime exception.
Please suggest about how to map in this case.

In my scenario:
     E1COGH
     |
      -> E1COGS
         E1COGV
where     E1CGH -> Main segment
     E1COGS & E1COGV -> sub segment
E1COGH -> 1..unbound
E1COGS -> 1..unbound
E1COGV -> 1..unbound
At the target side I have created two Statement Structure (ie.Statement & Statement_1) . One for E1COGS (ie. Statement) & the other for E1COGV (ie. Statement_1).
Case 1 -> If E1COGS is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGS is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement & in the absence of E1COGS this Statement structure is SUPPRESSED.
Similarly,
Case 1 -> If E1COGV is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGV is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement_1 & in the absence of E1COGV this Statement_1 structure is SUPPRESSED.
All the elements of the segment E1COGH, E1COGHT & E1COGHR are replicated in all the rows for X (no. of occurance of E1COGS) + Y (no. of occurance of E1COGV).
While testing in Message Mapping, I am able to get the output as for multiple occurence of E1COGS & E1COGV in a single E1COGH.
But if I increse the occurence of E1COGH the it is giving the following error :
Runtime exception during processing target field mapping /ns0:MT_Cost_Element_Group_Response/Statement/DBtablename/access/GROUPNAME. The message is: Exception:[com.sap.aii.mappingtool.tf3.IllegalInstanceException: Too few values in first queue in function useOneAsMany. It must have the same number of contexts as second queue.] in class com.sap.aii.mappingtool.flib3.NodeFunctions method useOneAsMany[com.sap.aii.mappingtool.flib3.CollapseContexts@51197231, , ]
Please suggest how to map the occurence of E1COGH simultaneously with the occurence of E1COGS & E1COGV.

Idoc(receiver) message splitting using BPM

Hi,
could you provide some blogs which is useful for Idoc (as a Receiver) message splitting (1:N scenario) using BPM.
I have gone thru some of the Blogs, i didn't find good one according to this scenario.
Thanks
Praba

Hi Michal,
Thanks for ur reply.
You said " if you have one message and want to have multiple IDOCs
there is no need for a BPM -
you just need to change IDOC occurance - that's all"
I agree to your point.
My scenario is more or less same but "With single message , i need to generate multiple Idocs" based on synchronous proxy response from R3. That is the reason we already gone with BPM.
Already i used the BPM in my interface due to req. It was working. Earlier i was posting single Idoc to R3 with multiple Header segment (each Header segment has one quantity)
Now due to req. change, for each single quantity (quantity is my source Message Type field), i need to post single Idoc to R3 if i get response from R3.
My XI version PI 7.0 SP14
Idoc structure:
 <xsd:attribute name="SEGMENT" type="xsd:string" fixed="1" use="required"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 </xsd:complexType>
- <xsd:complexType name="WPUWBW.WPUWBW01";>
- <xsd:annotation>
 <xsd:documentation>POS interface: Upload goods movements</xsd:documentation>
 </xsd:annotation>
- <xsd:sequence>
<xsd:element name="EDI_DC40" type="EDI_DC40.WPUWBW.WPUWBW01"; />
 <xsd:element name="E1WPG01" type="WPUWBW01.E1WPG01"; minOccurs="0"
 maxOccurs="9999999999" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 </xsd:sequence>
 <xsd:attribute name="BEGIN" type="xsd:string" fixed="1" use="required"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 </xsd:complexType>
 </xsd:schema>
Already I am using this Idoc structure in various interfaces also. If i edit the occurance of the this Idoc and import in External definition with same name, I feel it afffect mapping in other interfaces also.
Inputs are highly appreciated.
Edited by: Prabaharan Rangasamy on May 22, 2009 4:14 PM

Error in IDoc to JDBC scenario

Hi friends,
I am configuring an IDoc to JDBC scenario in XI.When I am testing the scenario in Test Configuration then it is getting processed successfully but when I am tseting the entire configuration then in sxmb_moni the following error is showing:
"Error occurred during back-routing Error in communication channel". Please help as I am unable to understand the error.
regards
Debansu

Hi Debansu,
Please go through the link it may help to solve your problem.
JDBC Adapter / Acknowledgements
Error in back routing Error in communication channel
Regards,
Sridhar Goli
Edited by: sridhar goli on Aug 11, 2008 11:35 AM

IDoc to JDBC scenario - UDF

Hi,
Hope you all are doing well. I have an IDoc to JDBC scenario. The IDoc structure is as follows:
 <IDOC BEGIN="1">
 <Structure 1>
 <DEFINITION>xxxx</DEFINITION>
 <CREATE_DATE>20070706</CREATE_DATE>
 </Structure 1 SEGMENT="1">
 <Structure 2>
 <ELEMENT>xxx1</ELEMENT>
 <CREATE_DATE>20070719</CREATE_DATE>
 </Structure 2>
 <Structure 2>
 <ELEMENT>xxx2</ELEMENT>
 <CREATE_DATE>20070719</CREATE_DATE>
 </Structure 2>
 <Structure 3>
 <ELEMENT>xxx1</ELEMENT>
 <PROJECT>yyyy1</DEFINITION>
 </Structure 3>
 <Structure 3>
 <ELEMENT>xxx1</ELEMENT>
 <PROJECT>yyyy2</PROJECT>
 </Structure 3>
 <Structure 3>
 <ELEMENT>xxx2</ELEMENT>
 <PROJECT>yyyy3</DEFINITION>
 </Structure 3>
 <Structure 3>
 <ELEMENT>xxx2</ELEMENT>
 <PROJECT>yyyy4</PROJECT>
 </Structure 3>
 </IDOC>
Structures 1, 2 and 3 are at the same level/hierarchy in the IDoc. Structure 3 contains the project name of records in structure 2. The requirement is that if the records in structure 2 have the create date as the current date then the corresponding project in structure 3 has to be passed on to the database by creating a statement. To do this, we need to check the date of the record in structure 2 and if the date is equal to the current date then we have to use the element in structure 2 to select the corresponding rows in structure 3 to be passed on to the database. The INSERT statements have to be created for each of the rows of Structure 3 to be passed on to the database.
How do I achieve this?
I tried using node and text standard functions functions but was unable to achive the objective. Can I use UDF to read the IDoc structures and determine the statements?
regards
Debansu

Hi Debansu,
Use this Queue type UDF
public void UDF(String[] curDate, String[] Element_Str2, String[] date, String[] Element_Str3, String[] project, ResultList result, Container container) throws StreamTransformationException{
for(int i=0; i<date.length; i++)
 if (curDate[0].equals(date))
 for(int j=0; j<project.length; j++)
 if (Element_Str2.equals(Element_Str2[j]))
 result.addValue(project[j]);
Here first parameter is current date function, second parameter is 2nd structure element field, third parameter is date field from 2nd structure, fourth parameter is 3rd structure element field and fifth parameter is project field from 3rd structure.
Regards,
VR

IDOC to JDBC Scenario error

Hi All,
I am doing a IDOC to JDBC Scenario.I am done with IR and ID.
The Table in the DB is TABLE1 with Field1 and Field2.
Now when I run thescenario it throws an error ,
2009-03-19 12:41:06 Success INSERT INTO TABLE1 (Field1, Field2) VALUES (KM247850, FINJTIA)
2009-03-19 12:41:06 Error Unable to execute statement for table or stored procedure. 'TABLE1' (Structure 'Statement') due to java.sql.SQLException: [EUDNT038]The name "KM247850" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
But it has successfully generated the SQL Query which I think is perfect.
But whats the error which follows that?
How do I resolve it?
Thanks,
Venu

Hi,
It could be due to wrong structure of JDBC, compare your target structure with this blog..
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Regards,
Sarvesh

IDOC to JDBC scenario: Does INSERT command expect a result value?

Hello,
we have an IDoc-to-JDBC-scenario configured on our XI 3.0, which uses the INSERT command to put a dataset coming from R/3 into a SQL database. This works fine.
Now a trigger has been activated on the database, which sets a flag to each dataset after inserting.
Because of this a system error occurs in the Adapter Engine and I found in the AuditLog (logSQLStatement=true), that the INSERT command is processed correcty, but in the next step an error is shown up: 'SQLServerException. A result set was generated for update.'
Could it be, that the trigger returns a result value, which can't be handled on the XI ?
If yes, how can I solve this issue? I have read something about the different methods execute(), executeUpdate() and executeQuery(), but I don't know how and where this has to be configured...
Thanks in advance,
Juergen

Hi Upendra,
I got some more information from the database adminstrator:
He used the following command 'exec xp_cmdshell @ExportCmd , no_output'
whereas @ExportCmd contains the command.
With the no_output option, the xp_cmdshell does not return a recordset.
I hope this will be helpful to you.
Grtz,
Juergen

File to JDBC Scenario through BPM

Hello All,
Kindly help me to create a below XI scenario using BPM.
Scenario:
I want to take the file data and update the details in JDBC and if the records gets updated, i mean update count > 0 then only i want to archive file otherwise i dnt want to move the file from source folder.
Thanks & regards,
Vanita

Hello Vanita Jain,
Please follow these documents which is mentioned in thread mentioned by Shiva.
Check out the weblog and help for writing stored procedure:
JDBC Stored Procedures
Calling stored procs in MaxDb using SAP Xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
Read the documents and try to configure it.
Regards,
Amit Barnawal

Problem in Idoc to JDBC scenario(uses BPM)

Similar Messages

Maybe you are looking for