Problem in IE with link opening underneath div

Can anyone please help me fix the link on my webpage for
Franchise Opportunities
http://www.corpclean.com.au/franchiseopportunities/index.htm
It seems to be opening up underneath the div below it.
thanks

Similar Messages

Vertical menu bar link opening underneath div

This is my first post and would appreciate some help.
I've used a spry menu bar for my navigation and the link for
Franchise Opportunities opens underneath the corresponding div.
Link below.
This is my first post and any help with this problem would be
greatly appreciated. Thanks.
http://www.corpclean.com.au/franchiseopportunities/index.htm

Welcome to our humble abode.
Before we start, when you place an online URL, there is no need to place any code in your message. The code that we see online is the best way for us to be able to help you.
To overcome your uneasiness of seeing your site being misconstrued in IE, place the following bit of information in the <STYLE> section of your document.
ul.MenuBarVertical a {
width: 17.5em;
This will be the deterrent for shorter items to claim their neighbours as being part of them.
Happy Sprying and keep up the good stuff
Ben

Problems syncing N9 with link

N9 gives EDP_NOT_FOUND when trying to sync with link. I had the phone at the nokia repair center due to some reception problems. They installed the OS on it again and then the problems started. I have tried reinstalling the software and have done both the hard- and soft-resets and link gives that message. It was working fine before I had the reseption problems repaired.
The attached file is a picture of Link (in finnish, sorry) and it says:
Media files can't be read. Proceed by trying the following:
- Reconnect the phone.
- restart the phone.
error code: EDP_NOT_FOUND
I have done the things it mentions several times and the reseting I mentioned above, but nothing seems to work. I don't want to have the phone repaired for another week or two what could I do ?
Attachments:
Kuvankaappaus 2011-11-27 kello 20.42.54.png ‏296 KB

have you tried to uninstall/reinstlal link?
there was a new version just released. it may be worth trying that.
i do not personally use link, i just transfer the files over via cable mass storage mode.
here is the link, you will need to login http://betalabs.nokia.com/apps/nokia-link/download_and_installation

After removing malware Firefox is still broken even after uninstall/reinstall, yet other browsers have no problems with links opening multiple unwanted windows.

I removed malware from my new Windows 7 pro 64 bit PC. I have reinstalled Firefox multiple times to try and resolve the problem, even deleting the Mozilla folder from programs on the C drive. Whenever I click on a link on a webpage in Firefox, multiple unwanted tabs and windows open up making Firefox virtually unusable. Resetting Firefox doesn't help. I installed Chrome and do not get these popups. The malware must have caused some damage related to Firefox that will not allow Firefox to function normally even with a fresh install. I would prefer to use Firefox.
I don't recall the name of the malware.

The cause is most likely the preferences file in your profile folder. That file contains your personal settings, so it doesn't get deleted when you reinstall/update Firefox. The reset feature also retains your preferences file.
Instead of doing a mass delete of all your settings, you can try identify the culprits and reset them individually.
# In the [[Awesome Bar - Find your bookmarks, history and tabs when you type in the address bar|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Click on the '''Status''' column, to sort your preferences by status, and group all the ''user set'' preferences together. They should appear in bold.
# If you see any preference that look suspicious, just '''right-click''' on it, and select '''Reset'''.
If you're still not sure which ones to reset, you can post most of them here easily. Go to '''Help > Troubleshooting Information''' then click '''Copy text to Clipboard'''. Open a reply to this post, and go to '''Edit > Paste''' to paste the info from your Troubleshooting Information page.

Problem with links for external user

Hi,
We´re using SAP NetWeaver Portal 2004s SPS 10 and we have a problem with links within notification-mails:
The link to the document (e.g. within a subscription mail) consists of "http:///...". Only user using the portal within our network can open this links. All external user can´t open this links. How can I change the URL so that our external user can open the links, too?
Thanks for help,
Sven Keller

We already have another URL for external usage. My problem is how to define that created links to documents and folder are automatically using the external URL.
If somebody receives an email (e.g. subscription) the URL to the folder is:
http://<portalserver>:51000/irj/go/km/navigation/documents/Public Documents/Documentation
But it should be:
https://<externalportal>/irj/go/km/navigation/documents/Public Documents/Documentation
Message was edited by:
Sven Keller

Problem with link in SWF file

good day to you all in this great forum
my name is james and i want to see if i can find help here in the forum for my problem.
I'm building a site for my friend. (the site is in hebrew so sorry....)
for the site building I'm using the software iweb - on mac.
the site is almost complete but i have 1 big problem.
this is the link to the site - [URL="http://www.skip-up.com"]skip-up[/URL]
I'm using a head menu in flash
i have this flash from some template i downloaded from the internet and all i had to do is change the buttons names and to change the links of the buttons to point to my html pages.
and now to the problem :
to get to the problem in general - the flash head links don't work
if i press it in the site on godaddy nothing happens i just don't see the flash head and instead i dee a page that says something like "the page can not be found"
if i go to my desktop to my site directory and press the links the only thing that happened is that the button is changing the color like I'm in the right page but I'm still in the original page.
and the strange thing is that by if i only open up the SWF file and press the links are working
and it's open up my browser and to the right page
1. you can see the structure of the site here in this page :
[IMG]http://farm4.static.flickr.com/3442/3962332346_432d004df2.jpg[/IMG]
what i have is the master index.html and 2 directories : - the first one
called flash and have 1 flash file (this file is o.k with no problem)
and the other directory had all my site files
2. like i said i got the original FLA file and all i did is changing the buttons
names and changing the links of the buttons
the links i changed in the actions menu - i just searched for the original
url and change the names to much my website html pages names
3. here is the original FLA actions menu - you can see that I'm standing on
one of the links :
[IMG]http://farm4.static.flickr.com/3483/3961893129_2b8fc4ecd9.jpg[/IMG]
and here is my fla after the changes - as you can see i just changed the
name:
[IMG]http://farm3.static.flickr.com/2544/3962668872_8693f399ba.jpg[/IMG]
4. i uploaded all my site (it's small zip file) if someone wants to see more
i tried to describe everything in details because it's very important for
me to find a solution [URL="http://rapidshare.com/files/286059228/skipupsite.zip.html"]skip-up site download[/URL]
I'm really hopping there's somebody that will be kind to help me out
thank you very much

Hi. It looks like your code is not finding the mp3. At least,
I can reproduce your error code by removing the mp3 from the
directory, or renaming it.
Btw, if you test with FF instead of IE, you'd see the error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2032:
Stream Error.
at KZFlash_fla::Sound_2/KZFlash_fla::frame1()
Hope that helps.

How can I use Automator to open and save Word docs with links?

Hi-
I'm having trouble building a Workflow to open and save Word docs with links.
My Workflow so far:
1. Get Finder items
2. Copy Finder items (to new folder)
3. Rename selected items
4. Open selected items (Word docs)
Three problems occur.
The first is a Word 2004 problem -- I can't get the warning "This document has links in it; do you want to open it with/without updating the links" to go away (Unilke the Macro warning toggle capability, there is nothing in the Preferences for Word 2004 that addresses the links warning, as far as I can tell; any insight you can shed on this would be terrific.)
The second problem happens with Automator: if I manually accept the update of the first document's links, Automator opens that document but then halts completely, even though I've instructed it to open multiple documents.
The third problem I have is that there's no Finder action in Automator that allows me to save the document that's now open (as far as I can see).
Any suggestions for how to fix? If I can get this to work, and scheduled in iCal, it will be an unbelievable time saver.
Thanks,
Jeremy
PowerPC G5 Mac OS X (10.4.6)

Hi there Jeremy,
to do this you are going to have to add in some Run AppleScript steps...
These will rely on GUI Scripting. So first you need to activate GUI Scripting.
Now we need to add in a Run AppleScript action to the end of your workflow...
This will replace your current number 4 in the workflow (Open Selected...)
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">on run {input, parameters}
set allItems to every item of input
repeat with currItem in allItems
tell application "TextWrangler"
open currItem
end tell
activate application "TextWrangler"
tell application "System Events"
tell process "TextWrangler"
delay 2
--when the Word document is opened I have told it to press okay !
--I don't know what key you want it to press in the dialog box
keystroke return
delay 2
--save the doc
keystroke "s" using command down
delay 5
--close the doc
keystroke "w" using command down
end tell
end tell
end repeat
return input
end run</pre>
The above script should open each Word Document, press a button in the dialog box then do a save and then close the doc...then loop through the rest of them.
You need to replace the name Text Wrangler with Microsoft Word (or whatever it is called!), I don't have it on my Mac.
You will have to let me know what button needs pressing in the first dialog, if it isn't the 'highlighted ' one then we will have to amend the script...
regards
Ric

Problems working with linked files in illustrator

Hi everyone, i hope you can help me with this doubt that had given me problems since I started using illustrator. I'm using linked files in illustrator because i'm able to modify the files later, as I do in InDesign too, but in both cases I had have a lot of problems with the links, I don't know if i'm doing something bad, but this is what I do: I create a folder where I place my file (illustrator or InDesign) and the files that should be linked. Whit this i'm expecting of it to work like an html where the links works while they are in the folder, no matter if you move the folder, the links keeps working on the HTML.
But I have noticed that it doesn't work in the same way, because, I had have cases when the links work perfectly, but then i format my computer (Mac) and after that, I open my files againg but the links don't work already. I have exactly the same problem with my coworker, because im trying to edit a file with linked files since the place where it is in the other computer, obviously it opens perfectly there, but in my computer it asked to repair the links, so I select to repair automatically but I ask me to does it manually... So this is getting me tired, because I must repair the links here in my computer to work on it, and when for it get finished, my coworker should repair the links again, and this is going to be always we share files or i format my computer. It is important to mention that my coworker and me use mac with leopard and the same version of adobe (CS4).
So, as I said before, i dont knoe if my method is incorrect, should I do something different? any option to activate? or program that I should use? because I have herd a lot of Adobe Bridge, I don't know if this could have a option that could help me.
I hope finally somebody can help me with this doubt, because im sure that I'm not the only one having thie problem.
Thanks for your help

Hi. I am also experiencing this very annoying problem. Currently using version CS2, but this problem dates back to version 9. I check the box to link a tif file, not embed it, in Illustrator. All is well until I save and reopen the file. Suddenly the file is embedded. No other changes have been made to the folders or anything else. It just embeds itself and cannot be linked again.
So far, I conclude that something in the file itself has corrupted, because it is not possible to place a new file and have it link correctly again. So if I anticipate more changes, I create a new file.
Notice the upper left corner of the top toolbar. If you click on a file that has embedded itself, the file will be identified as "Group" instead of "linked file."
I've tried all kinds of things, like trying to ungroup it, trying to release a clipping mask, and so forth, to see what went wrong. Have not figured it out.

Indesign CS6 on MACs with OS 10.8 are having problems with links

Hi
Indesign CS6 on MACs with 10.8 are having problems with links. All links to other files have to be updated when opening a file although definitely nothing has changed to the linked files.
We can rule out our company's networking and the system hosting the files (HELIOS software on RedHat Linux VM). This happens with newly created Indesign files and with old ones. E.g. we create a file on Tuesday, save it and open it again on the exact same MAC on Wednesday and all links to other fiels (.indd, .png, .bmp, etc. nothing uncommon) have to be updated as they all show the yellow triangle + black exclamation mark symbol next to them. Has anybody else experienced this, What can we do? We have tried absolutley everything and updated all software from MAC OS to CS6 itself but nothing seems to help on the long run.
Any further information required?
M. Miller

Thanks for your quick reply.
We actually noticed that there also seems to be something wrong with the timestamps:
If we open the infos via the MAC finder to a file (.psd e.g.) which is linked in one of our indesign files, it states a certain date of creation.
If we then switch to the Indesign file we just opened in which we had to update all links and open the infos to exactly the same file we looked at in the finder, a different date of creation is stated. So there also seems to be a mistake here (hope it's clear what I mean).
We are ruling out our network as the error cannot be "re-enacted". We have created numerous test files in Indesign (simple white page containing one link to a .psd file which is also used in one of the supposedly defective files) and have opened them on various MACs with various OS versions over the past days/weeks but unfortunately the files open without any notifications or errors.
Just as a background: a few months ago, the problem seemed to occur between MACs with differing OS, 10.6 - 10.8 at first. A file which was created on a 10.6 MAC could not be opened without updating all links on a 10.8 MAC. That is why we updated everything to 10.8. The error did not occur for about 2-3 weeks but then reoccured again.?
Have you heard anything similar?

When right clicking and selecting, open in new tab and then repeating on a new link, the first link opens again??.. Only happens with OS X

On a page with multiple links I like to right click a few links and get them to open in a new tab. However, about 50% of the time the first link opens twice. It only seems to happen with OS X but have not noticed any similar behaviour with other applications.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Apple emails with links to iTunes causes infinite number of tabs to open

Whenever Apple sends me an email with links to iTunes, clicking on them causes Firefox to open an infinite number of tabs eg., they keep on opening without going to iTunes.

You get that problem if you select the Firefox program to handle a file if you get an "open with" dialog.
*https://support.mozilla.org/kb/Firefox+keeps+opening+many+tabs+or+windows

Strange problem with linking to external vob-file

I have a strange problem with linking to external vob-file. I
have created a link using BudApi:
on mouseup
set OK = baOpenFile ( the pathname &
"Files\General\Video\VTS_01_1.VOB", "normal")
end
This code opens mpg-videos correctly, but nothing happens
when I try to open vob-files with the same code. The strangest
thing is that when I change the default program for vob-files to
WinDVD this code works and the file opens, but when I change the
default program to Nero Showtime this code doesn't do anything
(when I open the file 'manually' from the folder, it opens
correctly on Nero Showtime). My client uses Nero Showtime, so I
really would appreciate any help on this one.

temes wrote:
>
quote:
Originally posted by:
Newsgroup User
>> When using Nero Showtime as a default program, the
error code is 31,
>> "There is no application associated with the given
filename".
>
> Which suggests that something has gone wrong with file
associations.
> If
> you double-click one of these files in an Explorer
window does it fire
> up Showtime and open the file?
>
>
> Yes, the file opens correctly in Nero Showtime when
double-clicking
> it in an Explorer. I tried the file associations and
created a
> html-page with a link to the vob-file, and the html-link
opens the
> vob-file correcly with Nero Showtime. My client reported
this
> problem, so it's not just my computer which is having
this problem.
If you open a command prompt, do you get an association
listed like this
example for .txt files:
C:\>assoc .txt
.txt=txtfile
C:\>ftype txtfile
txtfile="D:\Program Files\JGsoft\EditPadLite\EditPadLite.exe"
"%1"
Andrew

Problem with ati open gl not beeing supported.

Hello guys, I'm new here and this is probably not the right place to put this topic so sorry, but it's just that I have been trying to solve this problem for 3 months and nothing still and I'm kind off little frustrated. It's the ati 2400 hd agp pro video card that I've bought 3 months ago. It has problem with the open gl, I cannot play counter strike or any other game. It says open gl is not supported. I've tried everything, reinstalling my system, reinstalling drivers, tried all catalyst from 8.7 to 9.4.. So please if you know a fix for this I would be gratefull to heaven! :(
P.S. Nothing but a fix made specially for this problem is not going to help so don't write reinstall this etc etc..I'm sure many ati users have the same problem :(. I think I saw someone on this forum posting a link to the fix for this problem but that link doesn't work. :S

Quote
ati hd 2400 agp graphics
Are you talking about MSI VGA?
What OS you are running?

Problem with links on email templates

Problem with links on email templates
Hi,
We have been having issues with links on our email templates. Some of the links point to the following URL:
http://server'sname/thirdparty/FCKeditor/editor/fckeditor.html?InstanceName=emailTemplatesDTO.htmlBody&Toolbar=NewscaleFCKEditorToolBar#URL
Sometimes we get “Unknown internal error” on the web page.
Can anyone help or advise on how to resolve this issue?
Many thanks,
Wesley.

Hi Wesley,
This is rather late, but we've seen the same thing frequently (and I believe can replicate it). It's caused when you a creating a new email by copying the content of an existing one with a name space in it.
Upon copying, the link gets scrambled. The approach we use is to copy the email in to a new template, then strip out all of the URL links and add them back in.
Thanks!
Ant

How can I open an app from an e-mail link that is associated with link.

I get e-mails with links in them all the time (from forms, online shopping, etc). Some of those links are for websites that have an iphone app associated with them (especially forums). When I click on the link it tells me as much, and if I click "ok" to that dialog, it takes me to the App Store and to that specific App, where I can download it. Even when I have that app installed, rather than taking me to that app when I click on the link, I get the dialog again telling me that there is an app associated with their website (which I already know because I have the app). Is there any way to get these links to open in the associated App, rather than trying to open them up in the browser?

This question has been answered before, see the page linked below:
https://discussions.apple.com/message/15123175#15123175

Problem in IE with link opening underneath div

Similar Messages

Maybe you are looking for