Problem in Import PO pritout
Hi,
I have one problem for import PO printing documen tcurrency in USD for on PO in line item price the amount is coming as 4.7185 dollar which is OK but in another PO insted of 3.900 Dollar it is printing it as 3,9000 even though the user settinf in OWN Dta is OK it is decimal notation X and also in ME23N it is showing as 3.9000 but in printing it is displaying as 3,900
can you help on this issue, I have search SDN but all reply are asking for checking of Decinal notation which is already OK
regards,
zafar
Hi,
We are using customize program in NEU output type only also price field is OK and we are facing this problem in some PO only.
regards,
zafar
Similar Messages
-
Problems with importing text messages from PC Suit...
Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your helpMost phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle? -
Tempo problems with imported wav files
Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik. -
Problem while importing a Crystal Report in SAP Business One
Hi Experts,
I am facing a problem while importing a Crystal Report in SAP Business One, it displaying an error "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]" , and there is no use of this table OUQR in the Query.
Kindly let me know the solution.
Regards
Rahul SinghHi Rhaul,
i don't exactly know why this is a problem, but if your not on latest (881 p10) then upgrade and try again.
Or as a workaround,
try saveing from CR to SAP with the CR add-on. That usualy works better then the import.
Regards,
D -
Problem during import of 121 transport requests to productive system
Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve productionare you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit -
Problem in Importing Transport Request
Hi Everybody,
I have a Problem in Importing a Change Request . Yesterday ABAP person had Released two change request from DEV to PRD. I imported the 2. i got successfully imported but another one is still importing( status:Truck symbol)
after that i have imported many Request in PRD server, except this one. how to stop importing this? what may be the reason?
Regards,
SivaHi Siva Kumar,
You can reset the status of that transport.
Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
Best Wishes. -
Problem with import file type setting
Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?
-
Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?
haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR -
Problem During Importing using DBMS_DATAPUMP
Hi,
I am facing Problems while Importing usinf DBMS_DATAPUMP:
Its not showing any Error but the Tables not getting Imported.
Below is the Code whihc i have written for Import:
CREATE OR REPLACE PROCEDURE Data_Pump_Import_Load AS
ind NUMBER; -- Loop index
h1 NUMBER; -- Data Pump job handle
percent_done NUMBER; -- Percentage of job complete
job_state VARCHAR2(30); -- To keep track of job state
le ku$_LogEntry; -- For WIP and error messages
js ku$_JobStatus; -- The job status from get_status
jd ku$_JobDesc; -- The job description from get_status
sts ku$_Status; -- The status object returned by get_status
BEGIN
-- Create a (user-named) Data Pump job to do a schema export.
DBMS_OUTPUT.PUT_LINE('COMES HERE');
h1 := DBMS_DATAPUMP.OPEN(operation => 'IMPORT', job_mode =>
'TABLE',job_name => 'RET_IMPORT_TEST');
DBMS_OUTPUT.PUT_LINE('COMES HERE1111');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEXPORTTEST.DMP', DIRECTORY => 'EXPORT_DIR',filetype=>1);
DBMS_OUTPUT.PUT_LINE('COMES HERE2222');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEIMPORTTEST.LOG',DIRECTORY => 'EXPORT_DIR',filetype=>3);
DBMS_DATAPUMP.SET_PARAMETER (handle => h1,
NAME => 'INCLUDE_METADATA',
VALUE => 1);
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'DATA_ACCESS_METHOD', VALUE =>'AUTOMATIC');
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'TABLE_EXISTS_ACTION', VALUE =>'REPLACE');
DBMS_OUTPUT.PUT_LINE('COMES HERE3333');
-- Specify a single dump file for the job (using the handle just returned)
-- and a directory object, which must already be defined and accessible
-- to the user running this procedure.
-- Start the job. An exception will be generated if something is not set up
-- properly.
DBMS_DATAPUMP.START_JOB(h1);
-- The export job should now be running. In the following loop, the job
-- is monitored until it completes. In the meantime, progress information is
-- displayed.
percent_done := 0;
job_state := 'UNDEFINED';
WHILE (job_state != 'COMPLETED') AND (job_state != 'STOPPED') LOOP
dbms_datapump.get_status(h1,
dbms_datapump.ku$_status_job_error +
dbms_datapump.ku$_status_job_status +
dbms_datapump.ku$_status_wip,-1,job_state,sts);
js := sts.job_status;
-- If the percentage done changed, display the new value.
IF js.percent_done != percent_done
THEN
DBMS_OUTPUT.PUT_LINE('*** Job percent done = ' ||
TO_CHAR(js.percent_done));
percent_done := js.percent_done;
END IF;
-- If any work-in-progress (WIP) or error messages were received for the job,
-- display them.
IF (BITAND(sts.mask,dbms_datapump.ku$_status_wip) != 0)
THEN
le := sts.wip;
ELSE
IF (BITAND(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
THEN
le := sts.error;
ELSE
le := NULL;
END IF;
END IF;
IF le IS NOT NULL
THEN
ind := le.FIRST;
WHILE ind IS NOT NULL LOOP
DBMS_OUTPUT.PUT_LINE(le(ind).LogText);
ind := le.NEXT(ind);
END LOOP;
END IF;
END LOOP;
-- Indicate that the job finished and detach from it.
DBMS_OUTPUT.PUT_LINE('Job has completed');
DBMS_OUTPUT.PUT_LINE('Final job state = ' || job_state);
dbms_datapump.detach(h1);
END;
/Use metadata_remap proc with REMAP_SCHEMA option:
DBMS_DATAPUMP.METADATA_RAMAP(id, 'REMAP_SCHEMA', 'SOURCE_SCHEMA', 'DESTINATION_SCHEMA'); -
Problem in Importing in configuration.
Hi All,
I am facing a problem while importing the configuration object saying that "UNABLE TO CONNECT TO SLD".
Can you please let me know if i need to check anything , or anyway out.
thanks,
JAYThanks a lot for all your valuable suggestion.#
I have checked the SLDCHECK it is perfectly all right as expected with most of the things in gree and there is no red mark showing in from the perticular transaction, so also the SLD part is also opening perfectly as expected.
what next ... i am not findng any clue to progress.
thanks,#
JD -
Problem in importing from dmp file
Hi ,
I am facing problem while importing from dmp file on unix server
Error is as follows :
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
Export taken was with user xxx@yyy
import command is : imp xxx/ppp file=abc.dmp TABLES=xxx.table1 ignore=y feedback=500
please help me out.
Atul ChouguleI tried with FROM USER / TO USER , but the result is same.
$ imp uuu/ppp file=aaa.dmp fromuser=uuu touser=uuu ignore=Y
Import: Release 8.1.7.3.0 - Production on Thu Jun 15 06:44:49 2006
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
With the Partitioning option
JServer Release 8.1.7.3.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
I am stucked up ,Dont know what to do . -
i am new to java and facing problems in importing package which are self made.
secondly does JDK 1.1.3 can support swingHi,
I had some problems myself. I will add few lines, maybe it helps:
OK, let's assume that you work in a directory. In this case, set classpath to this hierarchy as well as to "." ('this' hierarchy - like in DOS).
Now, assume that you want to use packages MyPack1 and MyPack2. The source files of classes belonging to MyPack1 must:
- start with command
package MyPack1;
- be located all in the directory MyPack1
(and the same for MyPack2, of course)
If you want to use MyPack1 within MyPack2, you have to include:
import MyPack1.*;
even though MyPack1 is, in fact, located on path: ../MyPack1/*
(trust the classpath is important here) -
Problem in Importing Configuration object
Dear All,
I am facing the problem while importing ID object.
Business system INTEGRATION_SERVER_XIP is not assigned to a business system group with the ID (XISystemGroup).
So , I just try to create a Group in Business System in SLD. But I could not find the option to create the System Gourp.
I could n't see <b> edit groups </b>
any clue..
Regards
DanabHi,
First, you have to start the SLD.
To create a group, proceed as follows:
> Business Systems
> Click on the drop-down next to Group and select Edit Groups
> Create a group for each environment (eg DEV, TST, PRD). Specify for each group which Integration Server is used.
To assign business systems to a group, proceed as follows:
> Business Systems (Group = all)
> Select your Business System
> Click on the Integration tab.
> Select the related Integration Server (which is associated with a group - see step 1)
To map your DEV Business Systems to TST Business Systems etc., proceed as follows:
> Business Systems
> Select the group of your choice
> Select your Business System
> Click on Transport
> Click on Add/Change Target
> Select the Target Group and System
KR, Danny De Roovere -
I have a problem with importing files.
eg i have a file: Complex.java
how can i use this file in another program (NR.java)??I have a problem with importing files.
eg i have a file: Complex.java
how can i use this file in another program
(NR.java)??There are 2 ways of that purpose.
1.If they are in the different and you hope you have your own function lib, you can define package in Complex.java, and import the package, that you can use this class.
Example:
if your CLASSPATH = .;E:\java;
you must put you Complex.class in E:\java\mylib;
//==== Complex.java ====//
package mylib;
public class Complex{
public int add(int a, int b){ return (a+b); }
//==== NR.java ====//
import mylib.*;
public class NR{
public static void main(String[] args){
Complex obj = new Complex();
System.out.println("Sum is ",obj.add(1,2));
}2.If they are in the same directory, you can use it directly without define package.
Example:
//==== Complex.java ====//
public class Complex{
public int add(int a, int b){ return (a+b); }
//==== NR.java ====//
public class NR{
public static void main(String[] args){
Complex obj = new Complex();
System.out.println("Sum is ",obj.add(1,2)); -
Problem in importing SWCV in Integration Repository
Hi All,
I am facing a problem while importing SWCV in Integration repository. it is throwing an error as
<b>Unable to read Software Component Version from the System Landscape Directory "XI1:50000"(SWC_IMPORT_PROCESS_EXCEPTION).</b>
Regards,
ChanduHi Chandrasekhar,
Have you configure SLD properly. to check this give the tcode 'sldcheck'. if it is not giving any error, u have to create 'lcr' rolesin j2ee UME and those roles to be maped to the users using j2ee visuval administrator. for more information check SLD configuration guide .
Regards
N.Amarnath
Maybe you are looking for
-
How to make visible context menu for nodes of the given level of treeTable?
Hello I'm using JDeveloper 11g 10.1.1.4 I have a TreeTable component with 4 different levels (Contry-Branch-Town-Object). I need to show custom elements of the context menu (right click of the muse) only for rows with "Object". Now, I'm doing it with
-
Cannot view names in Contacts.
This is only occurring on my 10.8.2 Mountain Lion driven iMac. Contacts is working fine on my iPad2 and 10.7.5 Lion MacBook. All three sync with iCloud. If I hit F9, the list of names shows up as a window but when I click on the window it disappea
-
Spinning ball during cut and paste?
Any ideas on why I am finding Numbers so slow. Whenever I try and copy and paste data from one cell to another I get the spinning beachball of death. I am working to my laptops harddrive and have no physical disks attached. Double clicking a cell can
-
Pc cannot connect to internet via airport
Hi I have an older Airport Extreme base station (round pyramid style) that is fine with my Mac (MacBook Air, iMac, iPad-2, iPhone 4+) and other wifi devices. However, we also have various PC laptops (needed for work) that can connect to the Airport
-
Arturia minilab+ Analog lab
Hi All, I recently purchased an Arturia minilab with Analog lab because the guy in the shop said it "of course" it would run on garageband. Not quite so thus far. Has anyone had any luck? I am running latest gb and maverick and the Analog lab does no