Problem in import profile - storage problem

I just bought new iMac, with Solid State Drive 256GB and HDD of 2 TB.
The problem is that I have to import my profile of old iMac where music, images, video etc. are about 800 GB... and import utility does not give the possibility to choose target drive for the storage of archives and libraries... it just propose as target the main disk (SSD) and says there is not enough space...
Anyone could help? Is there a solution?
Thanks for help
Marco

https://discussions.apple.com/message/18608474#18608474

Similar Messages

Problem in importing SAP Exchange profile (BASIS settings) - Urgent

Hi,
I am currently facing problem in importing SAP Exchange profiles manually.
When i enter into http://<J2EE_host>:<J2EE_port>/exchangeProfile with username as PISUPER, the page is getting loaded but
<b>1.</b>it shows a error message stating, Name or password is incorrect
<b>2</b>. When i ignore that error and proceed with the connections tab to edit the server settings, i cannot set the password for PILDUSER. It again says, Name or Password is incorrect..
What could be the reason for these errors. Please help me... This is very urgent....
Thanks in advance,
Rose

Thanks for your response guys. I checked for PISUPER and PILDSUPER in SU01 and checked for lock but it shows an error message saying User doesnot exist.
Kindly let me know how to procced on in this case.
Thanks and Regards,
Rose.

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Storage problem due to error Accessing to DialogRequestQueue in BatchProcessModel

Hi,
   we are using the TS 3.1 BatchProcessModel for an application in a client and we've found an error. Until now they were producing only 2 shifts a day. Since one week they start the third shift implying 7 days/24hours production. After this week they got one message error and TS terminates (I attach the message). This problem is related to the DialogRequestQueue. This Queue is created at the beginning of the BatchModel (Create Dialog Request Queue step) and in the middle of the Batch Loop there's a sequence call step with the name "Wait For TestSockets -- GetUUTSerialNumber" that calls the sequence "ProcessTestSocketRequests". In this sequence there's a step called "Get Next Request" where there's a Dequeu operation.
   The error message that we get seems to be related to a storage problem, something like the Queue is not dequeued and get bigger and bigger, is it?
    Some idea how to repair this problem? Thanks in advance!
Mackemann
Attachments:
Error.JPG ‏98 KB

Hi
it a though task,with out disturbing how can we do.
Ok
Option 1
Use the method DELETE_VERSION_FROM_DB of the class CL_RSTRAN_STAT to delete the existing A version of the transformation manually in the target system.
Ensure that the transformation is permanently deleted from the database; therefore, you should verify that the correct transformation ID is specified. so the the transformation get deleted in qulity for the particular source system
OR
Option 2
Manually in the Quality system you can use RS_TRANSTRU_ACTIVATE_ALL in se38
Last optionis creating the deletion request from Development and importin the request.
once this is done in the
Create a new request in the Development , Add the old request which is already transported into the quality before.
in the new request delete the object which are not required and relese it and import that to quality.
now all the status will turn green.
Santosh
Edited by: Santhosh Nagaraj on Nov 14, 2009 4:33 AM

Storage Problem with Zen vP

Hi folks,?I recently got?a Zen vPlus for Christmas, and with only 82 songs, 7 pictures, and [short] video, it appears that all of my 2 GBs are already used up. When I go into 'extras' and 'removable disc', it seems that GB is dedicated just to that, which seems strange because when connecting it to the computer, the 'removable disk U: dri've' appears to have no files on it. Has anybody had similar issues? More importantly, does anyone know what the problem may be with my storage? Surely the 2GBs have not been used up with so few files? After all, it is advertised as being able 000 songs... Many thanks for your help,?- CD

It's not a storage problem, but your Zen has been configured to use gb of its space as removable storage. You can get it all back by going to Extras ---> Removable Disk --> Hold Back Button --> Selecting Disable. You can also switch the capacity, if you want a small portion of your space to be used for non-media files.

Will Macbook Air(2012) with 256G storage flash have storage problem

Will Macbook Air (2012) with 256G storage flash have storage problem described in "MacBook Air Flash Storage Drive Replacement Program"?
In the web page http://www.apple.com/support/macbookair-flashdrive/, it says that Apple has determined that certain 64GB and 128GB flash storage drives used in the previous generation of MacBook Air systems may fail. I wonder whether Macbook Air with 256GB flash storage may come into the same problem?

Welcome to Apple Support Communities
No. 256 GB flash storage does not have that problem. However, it's important that you make backups of your data to keep your files safe

Problems with importing .dmp file (CLOB)

dear all
i am using oracle 10g XE
I am facing a problem with importing dmp ( one of my table contains clob coloum)
below mentioned is the error it gives while importing, please guide me as to how to handle this.
Thanks in advance
regards
Uday
"CREATE TABLE "RTEXT" ("SRNO" NUMBER, "TEXTDET" CLOB) PCTFREE 10 PCTUSED 40"
" INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS "
"1 BUFFER_POOL DEFAULT) TABLESPACE "APEX_1244730274482010" LOGGING NOCOMPRES"
"S LOB ("TEXTDET") STORE AS (TABLESPACE "APEX_1244730274482010" ENABLE STOR"
"AGE IN ROW CHUNK 8192 PCTVERSION 10 NOCACHE LOGGING STORAGE(INITIAL 65536 "
"FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT))"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'APEX_1244730274482010' does not exist

You have to use SELECT tablespace_name, status FROM dba_tablespaces; from sql prompt or sql developer.
Ash
As Jonathan Lewis mentions:
A general reminder about "Forum Etiquette / Reward Points": http://forums.oracle.com/forums/ann.jspa?annID=718
If you never mark your questions as answered people will eventually decide that it's not worth trying to answer you because they will never know whether or not their answer has been of any use, or whether you even bothered to read it.
It is also important to mark answers that you thought helpful - again it lets other people know that you appreciate their help, but it also acts as a pointer for other people when they are researching the same question, moreover it means that when you mark a bad or wrong answer as helpful someone may be prompted to tell you (and the rest of the forum) what's so bad or wrong about the answer you found helpful.

Storage Problems. I recently purchased a Canon Vixia HF G30.

Storage Problems. I recently purchased a Canon Vixia HF G30. I have the most recent updates for FCPX. After importing 59 clips or 120 minutes of AVCHD footage at 59.94 fps/1080 with surround sound I am finding that my files are huge!!!??? Using FCPX editing this footage is eating up a ton of space on both my macbook pro's hard drive (500 gb) and my external drive which is down to 2.78 tb from 3.67.   What am I doing wrong?

Thank you Russ and Bob. This will help me edit the video I took at my nieces wedding. I'm still having trouble
Russ, I m not sure if I chose to optimize at import. However, that is very likely as I had to change the automatic import setting of 23.98p(?) and choose to import at 59.94i 1920/1080 with surround sound audio.
Russ, what setting would you recommend that I import my video at?   I filmed the wedding in AVCHD at 59.94i at 28 mbps.
Do either of you think I should delete the Macintosh HD Projects and Events folder?   Trash my current event and project and start over?
My old events and projects should be ok if I do this right? They are in a separate folder and there is a backup folder as well.
By the way the Macintosh HD Projects and Events folder has 345 GB of data! I have no idea why that is. I cannot figure out how to open that folder to view the content.
I updated FCPX after importing my AVCHD video the night before - I also noticed that when I updated Final Cut Pro X - it created two new folders.... the previously mentioned Macintosh HD Projects and Events folder as well as a Macintosh HD Old Final Cut Projects and Events folder.
As stated previously the Macintosh HD Projects and Events folder has 345 GB of data. The folder for the Old Final Cut Projects and Events is 59 GB - Prior to updating FCPX I had moved all of my FCPX projects and events to my external drive along with my HVR folder which is currently 8.16 GB.
After updating FCPX and prior to joining this support community - I copied/moved both the Macintosh HD Projects and Events folder as well as the Old Final Cut Projects and Events folder along with the HVR Folder to my external drive - then trashed the existing folders on my macbook's hard drive.   when I opened FCPX to continue working on my newest project I got the read box of death on my project's clips and timeline - I was able to relink those files - but I'm still noticing that after continuing to edit - and with a timeline that is only 37 minutes long - I'm down even more GB on my macbook's hard drive as well as my external drive? Most of this data is grouped in "yellow" or other data when I go to view "about this mac" then click on the storage tab.   At the moment the "yellow/other" data is taking up 105 GB on my macbook's drive and climbs quickly as I edit my footage.

Aperture 3.5 + Mavericks external storage problems

Aperture 3.5 + Mavericks external storage problems
After upgrading to 3.5 and Mavericks, all my projects referencing files stored on NAS show blurry or black and not responding to edit commands. Sometimes Aperture crashes. The projects/photos were okay before upgrade. Also new projects on NAS show blurry or black or fail totally to import photos. If I move the same photos to the local drive, everything is just fine.
I am using NFS to access the NAS.
Reading through this forum I found some reports of similar behavior from people storing photos on USB external drives.
This seems to be only when referencing files located on an external drive. No problems if files are copied to the Aperture library.
Any similar experience?

Referenced files on a NAS was always an gray area. While it worked for most users most of the time it wasn;t clear that Apple supported the configuration.
The Apple documents on Aperture and non-locally attached drives can be read in a number of different ways. Of course the library definitely had to be on a local drive (and even here some users reported success with the library on a NAS) but referenced masters were never explicitly mentioned either way.
Most users had success with the originals on a NAS but even with earlier version of Aperture and the OS there were always the occasional report of problems. When push-came-to -shove if moving the referenced originals to a local drive fixed the problems there wasn;t much else that could be done.
Since the release of 3.5 and Mavericks it does appear that referenced originals on a NAS do not work at all in most cases. The best we can do here, being just users like yourself, is to suggest you contact Apple and try to get through to the Aperture team and see if you can get a definitive answer.
As for problems with referenced originals on locally connected drives, I'm not aware of any widespread problems. In the few cases I've seen it has come down to some issue with the OP's system.
Having your whole workflow and setup knocked out from under you like this is really bad, unfortunately there isn't much anyone here can do for this problem.
regards

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem while importing a Crystal Report in SAP Business One

Hi Experts,
I am facing a problem while importing a Crystal Report in SAP Business One, it displaying an error "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]" , and there is no use of this table OUQR in the Query.
Kindly let me know the solution.
Regards
Rahul Singh

Hi Rhaul,
i don't exactly know why this is a problem, but if your not on latest (881 p10) then upgrade and try again.
Or as a workaround,
try saveing from CR to SAP with the CR add-on. That usualy works better then the import.
Regards,
D

I have my iTunes music folder stored on an external hard drive. I recently purchased a new Mac. After attaching the external hard drive, all the songs imported without any problem except my Playlists. Any clue about where they are or how to revive them

I have my iTunes music folder stored on an external hard drive. I recently purchases a new Mac. After attaching the external hard drive, all songs imported without a problem except my playlists. Any clue about where they are or how to revive them for use on my new Mac?
Thanks!

Rysz wrote:
To retain your playlists, artwork, play counts, etc, you need to move the entire iTunes folder, not just the music files..
Correct.
After that just select the new folder location in iTunes> Advanced settings.
Incorrect.
Hold Option and launch iTunes.
Select Choose library and select the iTunes folder.
This will read the iTunes library.itl file in this folder and the library as it was previously will be opened.

Problem in Importing Transport Request

Hi Everybody,
I have a Problem in Importing a Change Request . Yesterday ABAP person had Released two change request from DEV to PRD. I imported the 2. i got successfully imported but another one is still importing( status:Truck symbol)
after that i have imported many Request in PRD server, except this one. how to stop importing this? what may be the reason?
Regards,
Siva

Hi Siva Kumar,
You can reset the status of that transport.
Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
Best Wishes.

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Problem in import profile - storage problem

Similar Messages

Maybe you are looking for