Problem in importing BAPI into XI environment

Hi,
I am trying to import BAPI_SALESORDER_CHANGE into XI. When I try to import it just hangs.
Other thing is when I try to import Z function module, it give me following error + com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: The function module "DD_DOMA_GET" not released for 'remote' calls.
But when I see the FM DD_DOMA_GET it is remote enabled and also it is released.
Can anyone let me know how to solve this isuue?
Thanks.

Hi,
There was an old thread wherein i replied too and it was solved, If its already released, may be an oss note will solve this,
Unable to import SAP objects
And SAP notes 717836 and 672745.
Regards,
Anirban.

Similar Messages

Problems with importing images into Lightroom cc

Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

Import BAPI into XI

How to import BAPI into XI?
-Naveen.

Hi Naveen,
It is similar like importing RFC into the Repository.
For this go to Integratio Repository->SWCV->Imported Objects->RFCs->right click to import.
For this your SWCV should have permited to access SAP Application systems. For this go to SWCV ->open that->there are 2 option buttons. Once you select , tehn it will ask you to enter SAP system details.
More clearly-
After importing the software component from SLD select the option Import of RFC and IDoc Interfaces from SAP Systems Permitted.. Under this software component and under Imported Objects RFCs and IDocs can be imported. Right click on it which will launch a wizard in which provide the details to connect to the R/3 system and choose the BAPI/RFC. And continue
Hope this helps,
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Major Problem with importing application from QA environment to PROD

We did our first ever full move of our application from our QA server to our PROD server tonight. First, I exported the current PROD application version as a backup. Then I did an export of the application on QA and then imported it into PROD using the same application ID as it had previously (which is the same as it was in QA). When the installation portion of the import was running I received an error. The error was: ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-00001: unique constraint (APEX_030200.WWV_FLOW_WORKSHEET_COND_PK) violated <pre>begin wwv_flow_api.create_worksheet_condition( p_id =&gt; 2700222847807840wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_page_id=&gt; 42, p_worksheet_id =&gt; 7285923079312021+wwv_flow_api.g_id_offset, p_report_id =&gt; 2694211409728899+wwv_flow_api.g_id_offset, p_condition_type+*
h1. We have been unable to get the app installed using the same application ID, so we installed it using a new application ID. However, we have now lost all of the user's saved interactive reports.
h3. So, first, we need to know how to get the user's saved interactive reports put into the new application id. Second, we need to know what the proper procedures should have been for exporting our QA application and importing it into PROD without loosing the saved interactive reports. Hope someone can help us out very quickly - the natives will be very restless tomorrow morning when they find out that they don't have their saved reports.
Thanks in advance for any help you can provide!
Dale

Thanks for your reply Scott.
The problem is that the saved reports are not in the application we are exporting, they are in the one we are trying to update. I'll try to provide a more detailed description of what we are doing. We have two separate server environments, one for our production Oracle databases and our production APEX workspaces and applications. The other is for our development and QA Oracle databases and APEX workspaces and applications. Both environments run the same version of Oracle. So, on the production environment, we have a workspace called "payorprofile" and, within that workspace we have an application with application ID 126. That is where our users have been happily creating their saved interactive reports for the past 4 months. On the development environment, we have a workspace called "payorprofile" and, within that workspace we have an application with application ID 126. Now we have a new version of application 126 on the development environment that we need to promote to production. This newly QA'd version does NOT have the user's saved reports but it has all of the new and changed pages, LOVs, lists, breadcrumbs, etc. We needed to merge the new pages, etc. from dev with the data and user's saved reports on prod. What we did was to export the Dev version without saved reports and then we imported it into the prod system using the same application ID. It asked if we wanted to overlay the current application 126 with the new one and we said yes. During the install step we got the error noted in this post. The only thing we knew to do was to import the dev application as a new application ID (we chose 326). The application works fine, but, of course, we don't have the saved reports. Now we need to get the saved reports into the new application 326 - and I think with the help of some articles and posts on the web we can do that. However, we need to know what to do differently the next time we are ready to promote a version of the application to production.
Thanks,
Dale

Problem with importing images into time lapse

Hi
I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
I want to create a time lapse using a sequence of still photographs. All file names are sequentially name/numbered.
I am using the Motion workspace, and have followed all of the instructions available.
Create correct sized new document (film & video).
Create video timeline.
Set frame rate.
Choose 'create new video layer from file'.
Point to first image in the folder where the images are stored.
At this point, no matter what I have tried, I receive this error:
I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
Anyone have any idea why I could be having these problems?
I have reset Photoshop, deleted the settings file, even reinstalled it. I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
Stuart

Unfortunately, yes--I've tried it that way over and over, and every other way I could think of. The files are all in one folder, and I've converted the raw files to both tiffs and jpegs. I even tried converting them to jpegs at the final pixel dimensions. Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered. I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores. I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead.
Anyway, thanks for all of your time. It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge. I like to know WHY it won't work for me. Sometimes it seems that there is just no logical explanation!
Stuart

Problem with importing JPEG into Flash

Hello,
Im using Adobe Flash CS3 PRO. I don't know what's wrong..when I try to import photos into the stage the photos get resized.
My photographs are 550px by 413px. I set my stage to the same size. Then I go to import to stage. I click import as a sequence. All the photos are appear smaller on the stage. They are only about 200px
Why is it happening?????
I am basicaly trying to import a sequence of photographs for my stop motion animation. Do you have any suggestions?
Thanks for helping!
Lucas

I don't know the why of it. I don't have this problem most of the time, but I have heard it come up before--I don't remember the solution though. It may have involved importing the image into something that is already scaled smaller.
Anyways, here's a couple of things to check while waiting for someone who might know more to come along.
First, select one of the images and select Modify -> Transform -> Remove Transform. If the Remove Transform option is grayed out, then nevermind.
If that didn't do anything, try dragging one of the images out to the stage from the library and see if it is the proper size.
If you have a ton of images, it's likely that neither of the two things above is an attractive solution anyways.

Problems with Importing MP3s Into Podcast

I'm having sudden trouble importing audio comments into my podcast. I've had no problems in the past doing this. The only difference is that the previous episodes were on my iMac G5 and this episode was produced on my MacBook Pro.
The audio comments arrive as WAV files but I use iTunes to convert them to MP3 format. This time when I tried importing them into my podcast GarageBand shows an error message that "this format is not supported by GarageBand." I find that hard to believe.
When I try to import the WAV files, they import but sound like the chipmunks -- and turn the rest of the recording into a chipmunk-like sound.
Any ideas?

You shouldn't convert them to Mp3 to begin with, use AIFF instead.
http://www.thehangtime.com/gb/gbfaq2.html#neverfail
As for what your problem is:
http://www.thehangtime.com/gb/gbfaq2.html#toofast
--HangTime [Will Compute for Food] %-|>

Problem with importing graphics into InDesign

This is a fictitious example to illustrate my problem...
I have .PSD file measuring 10cm square. It's completely blank except for a layer containing a 5cm square box in the middle. When I import to InDesign it places as a 10cm square picture frame (with the 5cm image in the middle surrounded by blank space), rather than a 5cm square picture frame "snapped" to the edges of the .PSD content.
This means doing a "Fit Frame to Content" now makes the InDesign frame the same dimensions as the .PSD document (ie. 10cm square), when it used to make it 5cm square (i.e the same dimensions as the CONTENT of the .PSD document). Any ideas about changing this back? I've no idea what's changed recently...
Apologies; that's been described incredibly badly. I hope someone understands what I mean!
Thanks in advance

Thanks guys. But in the past when this has happened it's seemed to be linked to the last image I opened in PhotoShop. Often I have to render PDFs in PhotoShop to send visuals to printers and, depending on what I pick in the "Crop to:" drop down box, in the past has altered the way my next image imports in InDesign. In the past if the next .PSD image imported into InDesign with the extra white space around it, I turned Import Options on and then got similar "crop to" options in InDesign, and (off the top of my head) chose "Bounding Box" to resolve the issue. Now I'm just getting the option to turn layers on or off.
That said, InDesign does now seem to be behaving exactly as you (Daniel) describe. This is annoying because I've been testing this now on a .PSD graphic which used to place and crop to the content, but now places at the size of the full PhotoShop document.
And Rik: I agree that I could crop the original images in PhotoShop, which would technically resolve the issue - and may end up being what I have to do in the short term. But I've got a bee in my bonnet about this now, because this isn't how InDesign has been behaving for me for the past 5 years.
I've tried deleting the preferences for both InDesign and PhotoShop in the vain hope it would be as simple as that. That didn't work.
I'll keep searching for the answer...

Problem with imported images into Indesign

I have scanned a book as a one bit (B & W) 600 dpi document. I have imported the document into Indesign as i need to integrate some decsreened pics in. I then export the finished document as a press ready PDF and the image virtually disappears off the page and what is left is very distorted. the type is twice as high and about five times wider than the original image.
I have contacted the scanner company and of course they put the issue with the exporting to the PDF.
Can anybody help??

This is bug #2960217 filed by me in September, relating to Indexed over Gray colorspace, also with a Fujitsu Scansnap S1500M.
I have scanned a book as a one bit (B & W) 600 dpi document. I have imported the document into Indesign as i need to integrate some decsreened pics in. I then export the finished document as a press ready PDF and the image virtually disappears off the page and what is left is very distorted. the type is twice as high and about five times wider than the original image.
The scanner that i have used is a Fujitsu Scansnap S1500M.
In short, don't use it in Grayscale (Or BW, I guess) modes. Use it in Color, or make sure to process the iamge in another app (like Photoshop) and save
it with a normal colorspace.

Problems with importing music into my 60gb ipod

I really need some help.. I just recently got the new 60gb ipod and had no problems imporitn music, i have a windows Xp and installed Itunes in which i registed my ipod, i then went on my sisters IBook and imported music from her. I then sucessfully imported more music from my windows computer. well i am currently visitn her and used her comp for more importing when somethien went wrong. My ipod will only play her music and not mine from my computer. It reads the playlists as if my music was there but when selected, it simply skips it and then when i try to play it on her comp the exclamation point goes up. I dont know what to do.. someone please help me!!!

Melissa, iPods were not made to dock to 2 totally different computers. This was done to prevent illegal file sharing. When you originally docked your iPod to your personal computer, the iPod views that as its "home". In docking to your sister's computer, you would have gotten a message saying something to the effect about " this iPod is linked to another library. do you want to replace iPod's contents with the current music library?" If you said "yes", you have now told iPod that your sister's computer is its "home" & that's why it can no longer access your music. The only way to get your music back is to do a restore of your iPod & allow iTunes to re-sync the library on your computer to your iPod.
Even though you are sisters, if you don't live in the same household what you are attempting to do is considered to be illegal file sharing. PLEASE DON'T STEAL MUSIC!

Problems with Importing BQY into Workspace

Hi All,
I need your help with resolving how to import a BQY into my workspace.
When I go to get the BQY (or any file for that matter) from C:\1.bqy (for example), when using the browse button, and navigating my local file system, I get an error that says, "file path is wrong".
Any ideas of what might be wrong?
This is version 11.1.1.2
Thanks,
Marty

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

Problem with imported .AI into Flash (performance issue/frame lag)

Hi Flash people i have a problem:
Background:
i am creating a flash file (old school frame animation with a little AS2) to be used on big screens (in a child libray)
i am importing diffeent files (some PNG some SWF images and Some .AI out of Illustrator) hee is the problem;
The file is BIG 1920+1200px (non scallable) all works fine until the movie hits the imported .Ai file(s) which are
browser views remade in full vecto in illustrator in 1200x800px - i have a simple image transition fom a PNG image
to the browser view (this view is pretty similar to a facebook frontpage in terms of content and text/image distribution.
the transition is 20-25 frames (in 31fps) and works fine with PNG but whrn the .AI frame is loaded the movie solws down
by factor 10 and it takes several seconds (5-8sec.) to play through the 1sec transition.
I have tried to export the same AI page as SWF out of illustrator and the esult is basically the same = exteme frame lag.x
how do i get about this?
i know the 1920x1200px is HUGE for a fullscreen transition/fade, but then again... it should work right?
any ideas? - any other vector formats does a better job (and yes it HAS to be vector as i am also doing some looking class effects)
thjis is really frustrating and the fist time since 96 i have hit the wall with flash :-/ - i have tried everything i know, perhaps overlooking the obvious?
best
Mobius6 :-)

Anyone? :-)

Problem while importing from Panasonic SDR-S10

After finding the panasonic SDR-S10 on the iMovie 08 compatibility list, I updated and bought the camera for quick video shots. While traveling, I filled three 2 GB cards with no techical problems. Importing them into iMovie though causes problems. About half of the clips are imported with sound, the rest without! I tried importing with the camcorder, a SD-card reader, onto my internal HD and HD2. Sound and picture is perfect on the camera. I use Quicktime pro but do not have the mpeg2 plugin. The camera compresse in mpeg2. Can anybody help?

I have the same camcorder and have used Visual Hub to convert the .mod clips to .dv files which work just fine with iMovie. You can try out Visual Hub for clips less than 2 minutes in length in the trial mode. I think it costs about $20. Also, I've heard you can buy an mpeg2 plug in for Quicktime Pro that will let you use those files. I think that is also about $20.
Also, search the apple discussions for ".mod" and you'll find a lot of other similar questions to the one you asked.
Hope this helps.

Workbook won't open after import into test environment - Function Related

Hi Experts,
We have a disco report that uses a custom database function. The function has been registered and is valid in the development environment and the report works fine.
We have exported the business area, report and relevant functions from the development environment and imported them into the test environment (Using diso admin import/export tool) in the following order:
1. Functions
2. Business Area
3. Workbook
There were no errors during the import with the exception of a failed grant which was my logon and does not exist in the target environment.
When I attempt to open the workbook in the test environment I receive the following error message: Item dependancy"" not found in the EUL. Attempt to open workbook failed.
At first I though that this was a folder developer key issue because I did have to change the id of a folder that this report uses however I have re-synced the ID's by ensuring the eul id's were different and I have decompiled the workbook using the d51wkdmp tool and I have confirmed that the workbook is looking at the correct items.
I noticed that the workbook had three function references so in the development environment I deleted the fields that used the functions and re-imported the workbook, guess what it worked OK meaning that the folder ID's etc... are ok and all in sync.
I attempted to create a new workbook in the test environment that used the imported function. When I did I got an error message saying that there was too many parameters for the function, exactly the same process works in the development environment and the calculation creates ok. I checked the function definition in discover administrator (test environment) and the function is correct, parameters present and validates OK exactly the same as the dev environment however when I try to use it discoverer plus falls over!!!!
Any ideas/pointers, at the moment I can't see how this can be anything except a bug in the import utility as the function is OK in Development and doesnt work in Test, we have used the standard export/import tools.
Thanks
Keith

Hi Rod,
This error is occuring with functions that only have 2 or 3 parameters. My standard install processes do use the refresh option.
I have been following this up with Oracle Support and they have managed to replicate the bug in there environment. It has something to do with optional parameters, when you change all the parameters to required it works ok however I have other functions that have optional parameters that do work ok so it is clearly not just the presence of optional parameters that is causing the problem.
This is the first time (and probably the last) that I have tried to do disco migration using the admin import tool I have always used the command line interface to automate installs in the past, as I havn't run into this before I would imagine the bug is not present in the command line tool.
I will post an update when I hear back from Oracle Development on a fix.
Keith

Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA      700     0015
SAP_BASIS     700     0015
PI_BASIS      2006_1_700     0006
ST-PI     2005_1_700     0006
CRMUIF         600     0003
SAP_BW      700     0017
SAP_AP                700     0012
BBPCRM                600     0002
First I had the following error:
   Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
   GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
     0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
     0 d /   0 i /   0 u /   6 = 100% ucf FUPARAREF
     6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 d /   0 i /   0 u /   1 = 100% ucf TFTIT
     1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
   successfully set a temporary lock on table REPOSRC
   REPOS /SAPCND/LDETERMINATION$14                A replaced.
   REPOS /SAPCND/LDETERMINATIONU14                A replaced.
    [dev trc     ,00000] Wed Nov 26 16:33:14 2008                         1315447 8.171484
    [dbdsoci.    ,00000] *** ERROR => invalid offset 0 for placeholder 16
                                                                                71 8.171555
   unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
   dsql_open returned with unexpected error code 2
   Please contact the SAP support.
   End of Transport (0016).
   date&time: 26.11.2008 - 16:33:14
   5 warnings occured.
   3 errors occured.
   Main import
   End date and time : 20081126163314
   Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
   Summary:
    24 DOCUT imported.
    16 DYNPS imported.
    30 DYNPT imported.
   387 REPOS imported.
    43 REPOT imported.
   Totally 505 Objects imported.
   Totally 3636 tabentries deleted.
   Totally 14 objects activated.
   Totally 12229 tabentries imported.
   62066888 bytes modified in database.
    [dev trc     ,00000] Wed Nov 26 18:14:19 2008                         20996974 40.917838
    [dev trc     ,00000] Disconnecting from ALL connections:                   30 40.917868
    [dev trc     ,00000] Disconnecting from connection 0 ...                  287 40.918155
    [dev trc     ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
                                                                              5759 40.923914
    [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
                                                                                921 40.924835
    [dev trc     ,00000] Now I'm disconnected from ORACLE                    8230 40.933065
    [dev trc     ,00000] Disconnected from connection 0                        90 40.933155
    [dev trc     ,00000] statistics db_con_commit (com_total=527, com_tx=307)
                                                                                59 40.933214
    [dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                52 40.933266
   Disconnected from database.
   End of Transport (0004).
   date&time: 26.11.2008 - 18:14:19
   2 warnings occured.
   Main import
   End date and time : 20081126181419
   Ended with return code: ===> 4 <===
Please advice me.
Regards,
Ahmed

I have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround.

Problem in importing BAPI into XI environment

Similar Messages

Maybe you are looking for