Problem in importing idoc structure into repository

Hi experts,
I am trying to import an IDOC structure (ORDRSP.ORDERS03) from an R/3 system into the repository. But I am getting the following error:
"             **Ready for import**
Import started...
ORDRSP.ORDERS03:
  + com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: IDoc Type ORDERS03 | urn:sap-com:document:sap:idoc:messages is already locked in another change list by user rajash
Import failed with 1 error
If i still continue, i see the idoc imported in the left hand pane, but when i double click it, i don't see the structure of the IDOC in the right hand pane.
Also, when i press the XSD/WSDL tabs, i get this message:
"Object IDoc Type ORDERS03 | urn:sap-com:document:sap:idoc:messages not found".
Can somebody guide me how to get around this issue?
Thanks and regards,
Ravi Kanth Talagana

Hi Ravi,
Go to user rajash 's change list and activate it. Also ask him to release the IDOC.
cheers,
Prashanth
P.S Please mark helpful answers

Similar Messages

  • Error when importing IDOC structure from SAP - Control record missing

    Hi!
    We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: <b>Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found</b>. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, Duncan

    Hi Duncan,
    Taka a look at these threads which address similar issues:
    Error during import of FIPARQ01 Idoc
    Error during IDoc Import
    Importing idocs:
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
    Hope these help!.
    Cheers,
    Chandra
    Message was edited by: chandravadhana gopalakrishnan

  • Importing File Structure into iPhoto

    I need help (or perhaps someone could kindly point me in the right direction) importing the file structure I had set up for my photos. Currently, I have my photos filed in an external drive. The structure I have created is, for example, 2008 folder, then under that 2008 folder I have a folder for each month, then in each month I have an events folder (christmas, tree cutting, etc...). This would look something like this: 2008/12/Christmas Day. Is there a way to import this structure into iPhoto?
    Thanks for the help... (if you've made it this far!)!
    -Ann Marie

    Ann Marie:
    Welcome to the Apple Discussions. You can achieve that by using virtual folders, 2007, 2008, etc. and the have smart albums in each of those folder for the months. The criteria for the January smart album would be "Date is the range 01/01/2007 to 01/31/2007".
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Problem in importing SWCV in Integration Repository

    Hi All,
    I am facing a problem while importing SWCV in Integration repository. it is throwing an error as
    <b>Unable to read Software Component Version from the System Landscape Directory "XI1:50000"(SWC_IMPORT_PROCESS_EXCEPTION).</b>
    Regards,
    Chandu

    Hi Chandrasekhar,
    Have you configure SLD properly. to check this give the tcode 'sldcheck'. if it is not giving any error, u have to create 'lcr' rolesin j2ee UME and those roles to be maped to the users using j2ee visuval administrator. for more information check SLD configuration guide .
    Regards
    N.Amarnath

  • Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

    Gentlemen,
    I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
    My current Support Package Level is:
    SAP_ABA       700     0015
    SAP_BASIS     700     0015
    PI_BASIS      2006_1_700     0006
    ST-PI     2005_1_700     0006
    CRMUIF         600     0003
    SAP_BW       700     0017
    SAP_AP                700     0012
    BBPCRM                600     0002
    First I had the following error:
       Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
       GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
         0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
         0 d /   0 i /   0 u /   6 = 100% ucf FUPARAREF
         6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
         0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
         0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
         0 d /   0 i /   0 u /   1 = 100% ucf TFTIT
         1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
       successfully set a temporary lock on table REPOSRC
       REPOS /SAPCND/LDETERMINATION$14                A replaced.
       REPOS /SAPCND/LDETERMINATIONU14                A replaced.
        [dev trc     ,00000]  Wed Nov 26 16:33:14 2008                         1315447  8.171484
        [dbdsoci.    ,00000]  *** ERROR => invalid offset 0 for placeholder 16
                                                                                    71  8.171555
       unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
       dsql_open returned with unexpected error code 2
       Please contact the SAP support.
       End of Transport (0016).
       date&time: 26.11.2008 - 16:33:14
       5 warnings occured.
       3 errors occured.
       Main import
       End date and time : 20081126163314
       Ended with return code:  ===> 16 <===
    After I got this error I upgraded the Kernel from patch level 159 to 179,
    After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
    From Import logs of the queue I can see the following,
       Summary:
        24 DOCUT imported.
        16 DYNPS imported.
        30 DYNPT imported.
       387 REPOS imported.
        43 REPOT imported.
       Totally 505 Objects imported.
       Totally 3636 tabentries deleted.
       Totally 14 objects activated.
       Totally 12229 tabentries imported.
       62066888 bytes modified in database.
        [dev trc     ,00000]  Wed Nov 26 18:14:19 2008                         20996974  40.917838
        [dev trc     ,00000]  Disconnecting from ALL connections:                   30  40.917868
        [dev trc     ,00000]  Disconnecting from connection 0 ...                  287  40.918155
        [dev trc     ,00000]  Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
                                                                                  5759  40.923914
        [dev trc     ,00000]  Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
                                                                                    921  40.924835
        [dev trc     ,00000]  Now I'm disconnected from ORACLE                    8230  40.933065
        [dev trc     ,00000]  Disconnected from connection 0                        90  40.933155
        [dev trc     ,00000]  statistics db_con_commit (com_total=527, com_tx=307)
                                                                                    59  40.933214
        [dev trc     ,00000]  statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                    52  40.933266
       Disconnected from database.
       End of Transport (0004).
       date&time: 26.11.2008 - 18:14:19
       2 warnings occured.
       Main import
       End date and time : 20081126181419
       Ended with return code:  ===> 4 <===
    Please advice me.
    Regards,
    Ahmed

    I have similar problem while updating support packages in SAP R/3 4.6C environment. 
    000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
    000 dsql_open returned with unexpected error code 1                                                                             
    000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
    000 dsql_open returned with unexpected error code 1                                                                             
    Here is an outline of series of events that happened:-
    We are applying in support packages in SAP R/3 4.6C HR Development
    (TFI) environment. We planned with installing all the SP stacks
    starting from 1 to 9.
    -Updated kernel, tp , r3trans and SPAM level to latest level.
    We received the following error in Import_Proper step of Support
    package upgrade. Though the step has been repeated after making sure
    that we have all the required files at OS level, we go this error
    repeatedly.
    Main import
    Transport request___: SAPKB46C52
    System______________: TFI
    tp path : tp
    Version and Release: 305.13.25 46D
    check-sum error in datafile after 9374854 bytes.
    Main import
    End date and time : 20081205192603
    Ended with return code: ===> 16 <===
    When we renamed Co-File & data_file at OS level to see if the files are
    created again and reran we got the following error.
    Main import
    Transport request___: SAPKB46C52
    System______________: TFI
    tp path : tp
    Version and Release: 305.13.24 46D
    Main import
    End date and time : 20081205185117
    Ended with return code: ===> 12 <===
    We tried importing the individual support package SAPKB46C52 from STMS
    and the transport cancelled at an earlier step with the same error.
    Dictionary import
    Transport request___: SAPKB46C52
    System______________: TFI
    tp path : tp
    Version and Release: 305.13.25 46D
    check-sum error in datafile after 9374854 bytes.
    Dictionary import
    End date and time : 20081205195929
    Ended with return code: ===> 16 <===
    While playing around I have deleted the transport from the tp buffer
    and added manually, before doing so I made a backup of tp buffer at OS
    level and I got following error though I reverted back to backed-up
    copy.
    - Error in phase: IMPORT_PROPER
    - Reason for error: TP_BUFFER_INCONSISTENCY
    - Return code: 0008
    - Error message: Wrong sequence of Packages in the tp buffer (e.g.
    SAPKB46C52 )
    I then tried to disassemble the package separately and reran the
    import queue. Now I have RC 8 on that support package.
    When I did R3trans -l on the datafile it completed successfully.
    D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
    This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
    R3trans finished (0000).
    I verified the size of file "CSR0120031469_0023301.PAT" and it is the
    same as mentioned in SSP.
    Let us know is there is a workaround.

  • Problems during import BW structure - Don't view the queries

    Hello!
    I have a problem when import the structure of BW 7.0 with xmla file in OBIEE+. The version of OBIEE is 10.1.3.4.
    When I do the importation, I don't see the queries created on BW, only the infocubes. But the queries is associate to infocube.
    Can help me?
    Thks,
    Flavia

    I solved this problem.
    In the BEx Query Designer (BW 7), opened the query and click on "Query Properties" and then, "Extended" option. There is a checked box called “Allow External Access to this query” that must be checked. At the end, save the query in BEx and import the XMLA on OBIEE+. The queries is loaded.

  • Copy imported IDOC structure to own data type structure in PI

    I am looking to copy the imported IDOC structure to data type structure, is there any way to do this instead creating whole elements again. The reason to do this is I need to change the occurence of one of the element and standard IDOC structure wouldn't let me do it.
    Thanks,
    Menaga

    Hi Menaga,
    Inorder to change the occurance in IDOC you will need to import the idoc as external definition which you can use for message mapping (once you change the occurance and import the XSD).
    Michal's blog will help you get to it precisely,
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    Gud luck,
    Regards,
    Pavan

  • Import text file into repository

    Hello,
    I have created the physical data model in Designer 10g.  I was given the table and column descriptions in an excel spreadsheet.
    Is there any way I can import these descriptions into the repository?
    Thanks
    Cathy

    Hi
    I actually can't answer your question because I'm having quite similar problems. But maybe you haven't created the correct table defs (index, and so on).
    By the way, how have you done to export the database to a txt-file. I can't do this and don't know why. Is it posible that you post your vi? this would be great.
    Do you have a good book or example about ActiveX and MSAccess? I can't find anything and the tutorials couldn't help me.
    Thanks and I hope my tip could help you.
    Yves

  • Import Enterprise Service into Repository and Enhance Service

    Hi experts.
    We've activated with transaction SOAMANAGER a enterprise service discovered in ENTERPRISE SERVICE WORKPLACE in SAP BACKEND.
    In SAP PI we created a external definition from WSDL definition and we've developed a SOAP to SOAP scenario where SOAP receiver is pointing  to this service. Everytring is working fine but I have some doubts.
    1. Is that the best way to proceed? Should I have to import metadata in someway from enterprise service workplace into repository and not create a external definition from import wsdl retrive in ENTERPRISE SERVICE WORKPLACE?
    2. Now we have a new requriment and we have to add to a new field into response message. So we need to enhance the enterprise service. How we can get that?
    Thanks a lot.
    Regards.

    Hi.
    We're using 7.11.
    First question resolved. In this guide is explained how to enhance a standard enterprise service:
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d?QuickLink=index&overridelayout=true]
    One of the steps is create a enhanced data type from original data type and then import this enhanced data type to backend with SPROXY transaction. Then you can enhance the standard code with BADIs. But my question is, how I import to SAP PI repository the metadata of a standard enterprise service (data types, message types, service interface). I'm using the enterprise service SupplierERPBasicDataByElementsQueryResponse_In.
    [http://esworkplace.sap.com/socoview%28bD1lbiZjPTAwMSZkPW1pbg==%29/render.asp?id=E84CA2C09A8411DD2B8D000F20FCB6A9&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=]
    Regards.
    Thank u so much.
    Edited by: Christian  Abad Chico on Feb 21, 2012 9:03 AM

  • Problems converting / importing PSE9 catalog into LR4

    Im having problems converting / importing my PSE 9 photos into LR4.  I went through the "File / Upgrade PS..." without success.  It seems to work...ie LR4 closes down and then creates a new catalog but then a box appears saying that the photos could not be imported because they are missing or damaged.  I then thought that my PSE 9 catalog is not set up right BUT LR4 tell me that the 27023 photos could not be imported for the reason stated.  In other words LR does see the PSE catalog because it give the correct amount of photo's.  I then did a small test by dragging some photos from my PSE 9 into LR4 and that seems to work.  All the keyword tags move across. Is there a problem or dont I understand the process?

    If I remember properly, it will not be an onerous task. What Exiftool will do is transfer the notes to some other metadata field that LR uses ... and I believe it can be done as a batch job, thus one execution of Exiftool does this for your entire photo collection (assuming its all under one parent folder).
    Here is the method (see post #12 in this thread): http://forums.adobe.com/message/2148552#2148552

  • Problem to import wmv files into imovie 08

    I have big problems to import my wmv files into imovie on my brand new imac24"
    have installed flipmac pro , and they can not help me on help desk.
    I have also upgraded Quicktime to Pro.
    Files look grey so can not highlight .
    Trieed to open in Qicktime and save as Mov. Stil could not have Imovie accept it when i draged or tried to import
    Flipmac suggested i also download imovie 0.6 but cant find it on apples support page. only 06 updates.
    Any one who can help?
    opb

    have installed flipmac pro
    Do you have the latest Flip4Mac update installed with the QT 7.2 fix?
    Trieed to open in Qicktime and save as Mov.
    The "Save As..." QT Pro File menu option only places the current audio and video compressed data in an MOV file container. It does not re-compress the data to a fully support QT compression format. Try converting the file to DV, MJPEG, H.264, etc. instead.
    Stil could not have Imovie accept it when i draged or tried to import
    Use the "Import Movie File" to "Move" a copy of your file into iMovie '08.
    Flipmac suggested i also download imovie 0.6 but cant find it on apples support page.
    iMovie HD v6.0.4 download for iMovie '08 purchasers

  • Problem while importing the wsdl into Dynpro ?

    HI Guys,
    I have developed a webservice within xi in the integration directory and while importing this wsdl into webdynpro i am getting the following error
    !ENTRY com.sap.ide.ws.proxygenerator 4 -1 Okt 10, 2007 19:02:23.788
    !MESSAGE com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Problem with WSDL file parsing. See nested message.
    !STACK 0
    com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Problem with WSDL file parsing. See nested message.
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.getDefaultSchemaMapping(ProxyGenerator.java:110)
    at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:103)
    at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:86)
    at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:82)
    at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage$1.run(NamespacePackageMappingPage.java:114)
    at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
    at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
    at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:357)
    at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage.initTable(NamespacePackageMappingPage.java:170)
    at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage.setVisible(NamespacePackageMappingPage.java:295)
    at org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:959)
    at org.eclipse.jface.wizard.WizardDialog.access$1(WizardDialog.java:940)
    at org.eclipse.jface.wizard.WizardDialog$3.run(WizardDialog.java:929)
    at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
    at org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:927)
    at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:684)
    at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:218)
    at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
    at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
    at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
    at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
    at org.eclipse.jface.window.Window.open(Window.java:563)
    at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
    at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
    at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
    at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
    at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
    at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
    at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
    at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
    at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
    at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
    at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
    at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
    at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
    at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
    at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
    at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
    at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
    at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
    at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
    at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
    at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
    at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
    at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
    at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
    at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
    at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
    at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
    at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: com.sap.engine.lib.xml.util.NestedException: Parser exception occurred:Fatal Error: com.sap.engine.lib.xml.parser.ParserException:  = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992) -> com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:  = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row=3, col=992) -> com.sap.engine.lib.xml.parser.ParserException:  = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)
    at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1032)
    at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadWSDLDocument(WSDLDOMLoader.java:1125)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.getDefaultSchemaMapping(ProxyGenerator.java:107)
    ... 63 more
    Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:  = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row=3, col=992) -> com.sap.engine.lib.xml.parser.ParserException:  = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)
    at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
    at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
    at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1022)
    ... 65 more
    Caused by: com.sap.engine.lib.xml.parser.ParserException:  = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)
    at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1565)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1710)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
    at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2843)
    at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:204)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:263)
    at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
    at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
    at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
    ... 67 more
    any help would be appreciated
    Thanks,
    srini

    Hi,
    If the import fails with the message that certain instances of the CIM class SAP_AssociatedContext were not imported, repeat the import. These errors are caused by an incorrect sort order in the export file. When starting the import again ignore the warning that data already exists. Choose Import anyway.
    Also go through this Document.
    http://help.sap.com/bp_bpmv130/Documentation/Operation/SystemContentCopy.pdf
    Regards,
    Akshay Jamgaonkar.
    Reward points if find useful.

  • Problem with importing premiere project into after effects

    Hi. When I import premiere project into after effects CS4 the files I speed up 2x (for example) look likes on the snapshot below, and they are not in the correct places.
    what can I do?

    Then don't speed them up... This is "as designed". AE and Premiere are not compatible in their tiem-remapping/ time-stretching, so tehre is no way to move between them without losing that info.
    Mylenium

  • Problem with importing scanned photos into iPhoto

    I have an Epson scanner that scans photos into the JPEG format. However, when I try to import these photos into iPhoto I am told that the file format is incompatible with iPhoto. This is odd since photos in iPhoto ARE in JPEG format.
    Can anybody help?
    Many thanks in advance for any assistance.
    Sir Leicester

    Did you scan these photos as grayscale b/w photos? If so that's the reason. iPhoto does not support the grayscale mode when it has the *+Dot Gain 20%+* profile added to it and that's what scanners use.
    Rescan all b/w images as color and they will be accepted by iPhoto. Or you can download the Automator workflow application, Convert to JPG and Embed sRGB profile, from Toad's Cellar and drop the files onto the application. This will batch convert them to jpegs in the RGB mode with the sRGB IEC61966-2.1 color profile.
    OT

  • Problem in importing idoc

    Hi Friends,
    Im using XI 7.0 , While importing an idoc into a SWCV  from connected R3 system i get the following error :
    " Problem to reach R3 system "
    Detailed error message  says " Attempt to import the application component hierarchy failed " CAN_NOT_BUILD_AKH.
    I checked that IDX1, rfc destinations etc . are all ok
    Message server details were also correct.
    Can you help.
    regards
    Prasenjit

    Hi,
    Make sure your user id has the proper authorizations as described in the following article on the XI/R3 boxes (if they are separate)
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
    Thanks.

Maybe you are looking for