Problem in Importing wsdl file in IR

Hi ,
I am doing soap receiver scenario.I had a wsdl generated from .Net and i imported the wsdl , i am not able to find teh methods in the external defination ,
Wat wil be theproblem.
Regards,
Shaik

Hi,
problems occur during the import of xsd and wsdl files as external definitions if the target namespace contains more than 60 characters. The system does not issue any error message, however, the list of the
recognized messages remains empty.
Solution;
For a wsdl file, you simply need to edit the target namespace manually ( attribute "targetNamespace" of the wsdl:definitions element) and reduce the number of characters to less than 60. For the structure of the extracted messages (exception: import assuming rpc style binding, see below), this target namespace does not have any importance.
Regards,
Jayasimha Jangam

Similar Messages

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Error while Importing Wsdl file of of 189 KB to XI Server.

Hi,
I am working on SAP NW 7.0.This is the Error I am getting while importing wsdl file of 189 KB to XI server.
Error :
Connection Interrupted.
Connection to server lost.
You can log on again once the server is available again.
Do you want to log on again.
Asking for password.
Another WSDL file of 8 KB successfully imported to XI server.
Please provide your reply on this asap.
Regards
Nilesh.

check this,
Note 1334387 - WSDL Import wizard fails with connection timeout exception
Regards,
Ravi

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Problems in importing avi file

I have problems\ in importing avi file..
when i try to import an avi file,, it is written that there is a message "unsupported format or damaged file"..
What should I do then?
I use Windows Vista Ultimate..

Welcome to the forum. As Harm points out, AVI is but a wrapper, and can contain all sorts of data inside. This ARTICLE might give you some insight into working with AVI's.
Good luck,
Hunt

Problem to import MOV files

Hi,
I have a problem to import mov files from my hard disk (coming from a Casio Exelim ZR100 @ 1920x1080, 30 pic/sec. 44kHz, codec: H.264/AVC ). I tried different project setups - doesn`t work . I get a common failure message. MTS file import works...
System Win 8
Premiere Elements last version, all updates done
Error Message:
nase30

Media import
A Google Translate of your error message says that you are experiencing a generic importer error; consequently, not an editing nor exporting issue.
If you are using the Casio ZR 100, the video involved would be characterized as
1920 x 1080 @ 30 frames per second (progressive)
Video compression = AVCHD (MPEG4 AVC/H.264)
Audio compression = IMA-ADPCM (stereo)
File Extension = .mov
On the Premiere Elements side you have Premiere Elements 11 on Windows 8 (assumed 64 bit).
I have downloaded one of these files from your camera brand/model from an online source.
Windows 7 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Windows 8 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Based on my findings, I have no evidence to make a generalization that there is a problem with this Casio video and Premiere Elements 11 on Windows 7 64 bit or Windows 8 64 bit.
So that leads us to look for other factors. Top of the list is the version of QuickTime that you have installed on your computer. (As John T. Smith has already asked and is awaiting a reply on that. If you have the latest version of QuickTime installed, then I would uninstall it and then reinstall it.
What type of problem are you report
"it worked before but not now"
or
"it never worked before"
What might be interesting to look at. If you rename just the file extension of your Casio AVCHD.mov from .mov to .mts, .m2t, or .m2ts can you then import the problem file?
We will be watching for your results.
Thank you.
ATR

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Import WSDL file along with XSD

Hi,
I have a WSDL file which has complex Data types (abc.wsdl). This complex data types are defined in the XSD file (abc-data.xsd).
If I just import WSDL file in ED I am unable to find the Complex Data types in Message Mapping.
How can I use the XSD file along with the WSDL file? Is there any source path as to give or what?
Could you please help me out?

first i will tell how my wsdl file is defined
<xs:element name="authInfo" type="<b>xx:AuthInfo</b>">                                   <xs:annotation>                              <xs:documentation xml:lang="en">                                   Authentication information                         </xs:documentation>                    </xs:annotation>                              </xs:element>
and in my xsd file for xx:AuthInfo
<xs:complexType name="AuthInfo">
          <xs:sequence>
               <xs:element name="acctName" type="tns:CustName">
                    <xs:annotation>
                         <xs:documentation xml:lang="en">
                         account name.
                    </xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="password" type="tns:AcctPswd">
                    <xs:annotation>
                         <xs:documentation xml:lang="en">
                        Specify the password                    </xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
when i import wsdl file in Ed i will get two inputs there but only one as "AuthInfo"
but "AuthInfo" has two inputs.
this is how my Target Message Look like
Tree          Occurences          Type
authInfo     1..1                      xx:AuthInfo
i hope i have cleared u..

Problem in Creating .wsdl file and mapping.xml with ant

hi
i am created my .wsdl file and mapping.xml file with wscompile tool but when i run this by ant tool it show a problem.
the command runs on command prompt but when run throught ant file it shows a following error :-
Execute failed: java.io.IOException: CreateProces: wscompile -define -mapping build\classes\META-INF\mapping.xml -d . -nd build\.................and so on
so if anybody have any idea then plz help me asap
thanx

The following Ant snippet is the way I've defined my wscompile task. I'm creating a web application and it looks like yours might be an EJB endpoint, but you can adjust where necessary:
<taskdef name="wscompile" classname="com.sun.xml.rpc.tools.ant.Wscompile">
     <classpath refid="compile.classpath" />
</taskdef>
<target name="init">
     <echo message="-------- ${appname} --------" />
</target>

     <target name="generate-server-from-WSDL" depends="init">
          <wscompile fork="yes"
                       keep="true"
                       base="${basedir}/WebContent/WEB-INF/classes"
                       import="true"
                       features="wsi"
                       xPrintStackTrace="true"
                       verbose="true"
                       mapping="${basedir}/WebContent/WEB-INF/jaxrpc-mapping.xml"
                       sourcebase="${basedir}/src"
                       config="${config.server.doclit.file}">
               <classpath>
                    <path refid="compile.classpath" />
               </classpath>
          </wscompile>
     </target>
     <target name="compile-server-from-WSDL" depends="generate-server-from-WSDL">
          <javac srcdir="${basedir}/src" destdir="${basedir}/WebContent/WEB-INF/classes" debug="${compile.debug}">
               <classpath refid="compile.classpath" />
          </javac>
     </target>Just make sure that the named destination directories exist before you run the script.
If you'd like more details on the wscompile Ant task, I found the following pages invaluable:
https://jax-rpc.dev.java.net/whitepaper/1.1/index-part1.html

Stub generation problem with the wsdl file

Hi all
I'm trying to write a simle webservice client based on JAX. My webservice is working fine I've tested it with a standalone app. In my webservice I'm using complex type. Problem is that i can't generate properly stubs. This is a msg I'm getting during the generation
warning: ignoring operation "getEmployee": message part does not refer to a schema element declaration
warning: Port "EmployeeIFPort" does not contain any usable operationsBecause of that my method to get the Object from the webservice is not generated.
This is the wsdl file.
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="EmployeeService" targetNamespace="urn:Foo" xmlns:tns="urn:Foo" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
    <schema targetNamespace="urn:Foo" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="urn:Foo" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
      <import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
      <complexType name="Employee">
        <sequence>
          <element name="name" type="xsd:string"/>
          <element name="surname" type="xsd:string"/>
       <element name="age" type="xsd:int"/>
     </sequence>
     </complexType>
    </schema>
   </types>
<message name="EmployeeIF_getEmployee">
    <part name="String_1" type="xsd:string"/>
    <part name="String_2" type="xsd:string"/>
    <part name="int_3" type="xsd:int"/>
</message>
<message name="EmployeeIF_getEmployeeResponse">
    <part name="result" type="tns:Employee"/>
</message>
<portType name="EmployeeIF">
    <operation name="getEmployee" parameterOrder="String_1 String_2 int_3">
      <input message="tns:EmployeeIF_getEmployee"/>
      <output message="tns:EmployeeIF_getEmployeeResponse"/>
    </operation>
</portType>
<binding name="EmployeeIFBinding" type="tns:EmployeeIF">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
    <operation name="getEmployee">
      <soap:operation soapAction=""/>
      <input>
        <soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="literal"/>
      </input>
      <output>
        <soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="literal"/>
      </output>
    </operation>
</binding>
<service name="EmployeeService">
    <port name="EmployeeIFPort" binding="tns:EmployeeIFBinding">
      <soap:address location="http://localhost:8080/EmployeeService/getEmployee"/>
    </port>
</service>
</definitions>However the complex type class Employee is generated properly as well as other stub classes like the interface EmployeeIF, EmployeeIF_getEmployee_RequestStruct and EmployeeIF_getEmployee_ResponseStruct (I mean i think they are generated properly). As I said befor the problem is that the webservice method from the EmployeeIF.getEmployee() is not generated in the EmployeeIF_Stub. Any ideas why? I'm using WTK 2.5
thx in advance :)

Here i Followed Url &sap-user=XXX&sap-password=YYY to the WSDL-URL with XXX and YYY being your username and password and you will be authenticated.
Later i Struck. Actual my requirement is I have two views i want to take a value from the first view and then return value displayed in the second view. All input/output parameters are the taken from the WSDL file. Can you please Help me.

Messages not adviced in extern definition after import wsdl-file from WAS

Hi friends,
after importing the three wsld-files in repository (extern definitions) the messages are not adviced. The referendes to the files are fine, because the name is shown at the tab externe...
But i´m not shure wheather i tool the right link ant Web Service Navigator. It is right to download the default SAP WSDL Files or the default one? Because in the SAP WSDL-files there will be an exception during import in XI repository (tag sap:useFeatur). What is the problem that the messages are not shown on the tab messages in externe definitions?
Thanks in advance,
Frank

I've the same problem. Here is my WSDL:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://blablabla.de:8080/jboss-net/services/MyServices" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://blablabla.de:8080/jboss-net/services/MyServices" xmlns:intf="http://blablabla.de:8080/jboss-net/services/MyServices" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns1="blablabla.de" xmlns:tns2="http://net.jboss.org/jmx" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <wsdl:types>
          <schema targetNamespace="blablabla.de" xmlns="http://www.w3.org/2001/XMLSchema">
               <import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
               <complexType name="MSOBean">
                    <sequence>
                         <element name="installationName" nillable="true" type="xsd:string"/>
                         <element name="requestId" nillable="true" type="xsd:string"/>
                         <element name="returnCode" type="xsd:int"/>
                         <element name="returnMessage" nillable="true" type="xsd:string"/>
                    </sequence>
               </complexType>
               <complexType name="MSIBean">
                    <sequence>
                         <element name="password" nillable="true" type="xsd:string"/>
                         <element name="project" nillable="true" type="xsd:string"/>
                         <element name="requestId" nillable="true" type="xsd:string"/>
                         <element name="userId" nillable="true" type="xsd:string"/>
                    </sequence>
               </complexType>
          </schema>
     </wsdl:types>
     <wsdl:message name="actualizeRequest">
          <wsdl:part name="inData" type="tns1:MSIBean"/>
     </wsdl:message>
     <wsdl:message name="actualizeResponse">
          <wsdl:part name="actualizeReturn" type="tns1:MSOBean"/>
     </wsdl:message>
     <wsdl:portType name="MSService">
          <wsdl:operation name="actualize" parameterOrder="inData">
               <wsdl:input message="impl:actualizeRequest" name="actualizeRequest"/>
               <wsdl:output message="impl:actualizeResponse" name="actualizeResponse"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="MyServicesSoapBinding" type="impl:MSService">
          <wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="actualize">
               <wsdlsoap:operation soapAction=""/>
               <wsdl:input name="actualizeRequest">
                    <wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://blablabla.de" use="encoded"/>
               </wsdl:input>
               <wsdl:output name="actualizeResponse">
                    <wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://blablabla.de:8080/jboss-net/services/MyServices" use="encoded"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="MSServiceService">
          <wsdl:port binding="impl:MyServicesSoapBinding" name="MyServices">
               <wsdlsoap:address location="http://blablabla.de:8080/jboss-net/services/MyServices"/>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>
No Idea.

FB3B2 unable to import WSDL files that contain XSD imports

Much to my dismay, the new WSDL import wizard does not seem
to work on WSDL files that import XSD files. When "Finish" is
pressed, an error dialog states "The WSDL definition could not be
parsed. The wizard cannot complete successfully."
I created a sample WSDL that uses the most basic of XSD
files to demonstrate. Remove the import line from the WSDL and it
will import, with the line it will not.

Hi Jeff,
How are you specifying the WSDL URI?
- If as an absolute path on your machine, make sure there are
no spaces in that path – there is a known issue about path
with spaces and WSDL with imports, and we’re on it. We tried
out your sample WSDL this way and it works.
- If you are specifying it as an HTTP url (accessing it over
the Apache HTTP server, for example), the workaround is a little
more complicated. There are indeed some unresolved issues with the
ActionScript generator. Try putting the wsdl and xsd files inside a
folder in the webroot, and another copy of the xsd in the webroot.
This worked for me - the problem is about locating the imported
document correctly: the introspection correctly uses the sibling
xsd file, while the generator incorrectly looks for that file one
level up. We’ll look into this and fix it.
Please let me know if it starts working or if it still does
not generate the ActionScript client classes. Thank you.
Also, please be aware of another known issue about WSDL with
imports:
http://bugs.adobe.com/jira/browse/FB-7678
(For WSDLs that import other documents, the cached WSDL file should
include the content of the imported documents).
Lacra

Error while importing WSDL file created in JDeveloper inside BS

Hi All,
I am facing error while importing WSDL of the DBAdapter service created using JDeveloper inside my business service in OSB.
The error in OSB is 'The Resource Mapped Does not exist'

Which version of OSB are you using? You need to upload schema (.xsd) files as well. WSDL has references to that schema(s) but they are not uploaded hence this error. On sbconsole, if you click on a WSDL name to see it, a button comes with name "Edit References". Click that to point to the xsd's you uploaded.
Regards,
Anuj

Problems with importing .MP4 file and the audio in FCP 6

Hi all,
I am pretty new to Final Cut Pro and have just approached my first project.
I have a Samsung VP-MX20
http://www.samsung.com/uk/consumer/detail/spec.do?group=cameracamcorder&type=cam corder&subtype=flashcamcorder&model_cd=VP-MX20/XEU&fullspec=F
*Codecs H.264, AAC.*
I needed some space on the camera so halfway through a holiday i transfered all the video files from the camera to my Laptop.
I have imported these files from the hardrive
Vid rate - 25 fps
compressor - H.264
Pixel Aspect - PAL - CCIR 601
What seems to be the problem is ok when i drag the clip from the viewer to the canvas and apply insert, i get the box that says 'Change Sequence settings to match the clip settings?
i click yes and when the clip is layed out on the timeline there is a red line above the timeline, when i play the clip i only get bleeps as audio and not the original sound.
If i drag the playhead i can hear the audio but if i try to play all i hear us bleeps plus if i import an mp3 the red line appears above the timeline and the same applies
can anyone help me here.
Thanks
Elles

Hi Zak,
many thanks for your reply, i have contacted Apple and taking your advice and using compressor i have converted the codec H.264 to Apple Pro Res 422 for interlaced material.
I have imported this file and when i drag once again from the viewer to canvas i get the standard box asking to change the sequence to match the clip.
I am still getting the red line above the timeline and bleeping as audio.
any idea?

Problem in importing XML file

good morning,
i've a problem when i try to import an XML file to SQL.
In my particular case i've an xml file structured like this:
<?xml version="1.0" encoding="UTF-8"?>
<Flussi xmlns="http://indennitario.acquirenteunico.it/Semplificato/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Flusso xsi:type="FlussoSI1.1150Type" COD_FLUSSO="1150" COD_SERVIZIO="SI1">
<IdentificativiRichiesta>
<CodPratGestore>688628</CodPratGestore>
</IdentificativiRichiesta>
</Flusso>
</Flussi>
I managed to import that file in that way:
DECLARE @XML AS XML, @hDoc AS INT, @SQL NVARCHAR (MAX)
SELECT @XML = '<Flussi
>
<Flusso COD_FLUSSO="1150" COD_SERVIZIO="SI1">
<IdentificativiRichiesta>
<CodPratGestore>688628</CodPratGestore>
</IdentificativiRichiesta>
</Flusso>
</Flussi>'
EXEC sp_xml_preparedocument @hDoc OUTPUT, @XML
SELECT
Cod_flusso = Events.value('@COD_FLUSSO', 'int'),
Cod_servizio = Events.value('@COD_SERVIZIO', 'varchar(20)'),
--EventIsFixed = Events.value('(IsFixed)[1]', 'varchar(20)'),
--EventKind = Events.value('(EventKind)[1]', 'varchar(20)'),
PIVAUtenteUscente = Events.value('(IdentificativiRichiesta/PIVAUtenteUscente)[1]', 'varchar(20)'),
CodPratUtente=Events.value('(IdentificativiRichiesta/CodPratUtente)[1]', 'varchar(20)'),
CodPOD=Events.value('(DatiTecnici/CodPOD)[1]', 'varchar(20)'),
Cf=Events.value('(AnagraficaClienteFinale/CF)[1]', 'varchar(20)'),
Cmor=Events.value('(DefinizioneIndennizzo/Cmor)[1]', 'float'),
Credito=Events.value('(DefinizioneIndennizzo/Credito)[1]', 'float'),
DataSwitching=Events.value('(DefinizioneIndennizzo/DataSwitching)[1]', 'varchar(20)'),
DataEmissione=Events.value('(FattureIndennizzo/DataEmissione)[1]', 'varchar(20)'),
TipoFattura=Events.value('(FattureIndennizzo/TipoFattura)[1]', 'varchar(20)'),
DataScadenza=Events.value('(FattureIndennizzo/DataScadenza)[1]', 'varchar(20)'),
IdentificativoFattura=Events.value('(FattureIndennizzo/IdentificativoFattura)[1]', 'varchar(20)'),
NumeroGiorniErogazione=Events.value('(FattureIndennizzo/NumeroGiorniErogazione)[1]', 'int')
--ParameterName = Events.value('(Fields/Parameter[@Name="Name"]/@Value)[1]', 'varchar(20)'),
--ParameterDuration = Events.value('(Fields/Parameter[@Name="Duration"]/@Value)[1]',
'varchar(20)')
FROM
@XML.nodes('/Flussi/Flusso') AS XTbl(Events)
EXEC sp_xml_removedocument @hDoc
The problem is that when i try to import the initial file with this kind of attributes: xsi:type="FlussoSI1.1150Type" i can't get the data.
does anyone know how to solve the problem? thank you

declare @x xml='<?xml version="1.0" encoding="UTF-8"?>
<Flussi xmlns="http://indennitario.acquirenteunico.it/Semplificato/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Flusso xsi:type="FlussoSI1.1150Type" COD_FLUSSO="1150" COD_SERVIZIO="SI1">
<IdentificativiRichiesta>
<CodPratGestore>688628</CodPratGestore>
</IdentificativiRichiesta>
</Flusso>
</Flussi>'
;WITH XMLNAMESPACES(default 'http://indennitario.acquirenteunico.it/Semplificato/1.0')
select p.q.value('@COD_FLUSSO','int'),
p.q.value('@xsi:type[1]','varchar(100)'),
p.q.value('@COD_SERVIZIO','varchar(10)'),
p.q.value('(IdentificativiRichiesta/CodPratGestore)[1]','int')
from @x.nodes('/Flussi/Flusso')p(q)
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Problem in Importing wsdl file in IR

Similar Messages

Maybe you are looking for