Problem in info package

HAI ,
     after transformation in bi 7.0, while creating info package the data was requested .but while monitoring ,status of psa is yellow.and the following message was shown
wait until 06.02.2008      17.15.23
         Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
can you please help me.

hai i got the satus of psa as red ..saying the error as follows....Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
can you help me to solve this please
Edited by: siva perumal on Feb 7, 2008 6:09 AM

Similar Messages

Problem with info package :Type variables in dataselection tab

hi,
i am facing a problem with the info package where, instead of date 'from and to' values if i am providing a Variable, info package is not loading data and the request status flag is in yellow for a long time though the no of records are less.
the same is working fine if i am providing values for from to to values in the 'data selection' Tab.
the field i am giving input is date field,i'm converting date into char format and giving the input in the same format.info package will not work if i provide '0' or '7' as the variable values.
anybody having any ideas, that would be help ful.
Thanx in advance

Hi Loknath,
          Have a look at this help documents on the creation of Routine.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a64fae07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b9/2d9778476b11d4b2b40050da4c74dc/frameset.htm
          Also go through this previous thread on the same issue.
ABAP Routine
          Hope it helps. Reward if the answer is helpful.
Cheers,
Aravindhan

Problem in function BAPI_IPAK_CHANGE : Changing info-package parameter.

Dear All,
Would you like please kindly help me regarding my problem ??
My problem is when i'm gonna run this function (written in subject). It's error, because One of parameter in info-package is mandatory.
But I have already input value for the mandatory field one, but it always mention that the corresponding field is not input yet.
Could you kindly help me please ??
This is my code:
p_selections-low = 'TSS-ACTIVE'.
p_selections-sign = 'I'.
p_selections-OPT = 'EQ'.
p_selections-fieldname = '9AVERSION'.
append p_selections.
IF sy-mandt = '100'. " Development.
IT_INFOPACKAGE-tINFOPACKAGE = 'ZPAK_4EY7D32RZXLLOJSLAWDNGX6G1'.
append IT_INFOPACKAGE.
ENDIF.
loop at IT_INFOPACKAGE.
clear P_BAPIRETURN.
CALL FUNCTION 'BAPI_IPAK_CHANGE'
    EXPORTING
      INFOPACKAGE = IT_INFOPACKAGE-tINFOPACKAGE
    TABLES
      SELECTIONS = p_selections
      RETURN      = P_BAPIRETURN.
How can I solve it yah ??
Is there any idea regarding this ?
Thanks a lot all for ur time.
Best regards,
Daniel Nurindra

Hi
this seems to be an APO datasource hence any further testing wont b possible at my system
You can try this thing
write a abap routine in infopackage to provide the value 'TSS-ACTIVE'   to the Field 9AVERSION
p_selections-low = 'TSS-ACTIVE'.
p_selections-sign = 'I'.
p_selections-OPT = 'EQ'.
then try to execute the infopackage to check no issue with the value of field
and
Also try including IOBJNM in p_selections while FM BAPI_IPAK_CHANGE

Info Package Problem

BW Gurus,
I am facing a weird problem in the info packages.
I am trying to pull data from SAP 3.1i system and my info package is set to "Full update". I am interested in one sales document. When I enter that sales document in the data selection screen of the info package and hit the check button, it just vanishes displaying a zero!!!!!. the document does exist in SAP 3.1i. Has anybody seen this weirdness in info packages?
Thanks
Ashwin

can you do the same selective extraction in RSA3 in the source system? you may need to check there first.

Problem while scheduling info package using HR datasource.

hi experts,
while scheduling the info package i am getting the following error.
Delete init. request
REQU_D340A67OSEQ9A6Q2B20X9SIOM before running
init. again with same selection
I think by deleting the setup it will work...
am i right or is there any other solution for this problem..
please reply soon.
its too urgent.
thanks n regards.
uday shankar.

Hi,
You are correct there is no setup table concept in HR extractors.
But there is a cache. Usually HR extractions will be full load. But it also supports delta. There is no setup table concept in HR.Once you perform your init (with or without Data transfer your delta path is set and delta will follow else can go for Full loads alone. It will extract data from the relevant tables like generic extractors. The data will be filtered based on the selection parameters.
Except for payroll and time management rest all sub-functional areas supports only full load.
In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
Auditing Information Technical name: 0HR_PY_PP_1
http://help.sap.com/saphelp_nw70/helpdata/EN/c7/532d7835db9a41b744aea58ed699ed/frameset.htm
Delta Update
This DataSource supports delta updates. The source system fills table HRMS_BIW_PPDELTA with the date and time of the first data transfer (initialization) and the date and time of all subsequent data transfers. This information enables the system to perform a delta transfer. It only selects posting runs with the above statuses whose last changed on date is after the date in table HRMS_BIW_PPDELTA.
If you use DataSources 0HR_PY_PP_2 (Posting Documents) and 0HR_PY_PP_1 (Auditing Information), you must transfer data to BW from both DataSources using the same selection criteria.
Also
http://help.sap.com/saphelp_nw04/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
step by step
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
HR extraction:
The HR module enables customers to effectively manage information about the people in their organization, and to integrate that information with other SAP modules and external systems
HR broadly has the following modules:
PA (Personnel Administration) and Organization Management
Personnel Development
Payroll Accounting
Time Management
Compensation
Benefits
Training and Events
The Personnel Administration (PA) sub module helps employers to track employee master data, work schedules, salary and benefits information. Personnel Development (PD) functionality focuses on employees' skills, qualifications and career plans. Finally, the Time Evaluation and Payroll sub modules process attendance and absences, gross salary and tax calculations, and payments to employees and third-party vendors
HR delivers a rich set of business content objects that covers all HR sub-functional areas.
How the data extraction happens:
Before getting into how the data gets populated into HR info cube
Let's understand the term info type
"An info type is a collection of logical and/or business-related characteristics of an object or person"
Here the data will be extracted from an info type (PA, PD, time management etc) and for few other applications it is from the cluster tables (Payroll, compensation etc.)
HR is basically master data centric because it is always related to people related Info Objects, such as Employee, Person. In most of the cases HR master data is defined as Time Dependent to enable historical evaluation. HR R/3 system records a specific period of validity for each Info type.
Procedure to extract the HR data:
Activate Data Sources in the Source system (R/3)
Replicate Data Sources in BW system:
Activate business contents in BW.
Populate HR cubes with data by scheduling info packages.
Note: Master Data should be loaded first
Except for payroll and time management rest all sub-functional areas supports only full load.
In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
Check the below links for more information
Technical Considerations in Global SAP BW/HR Implementations
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/505351fe-ec8c-2910-c5b5-a43bbf53f6fc
BW/HR Implementation
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
Hope this helps.
Thanks,
JituK

Executing info package problem

hi guys
Am having the problem
How can i know the my perticuer info package pulling data from which table. and which data source.
Can any one help me with navigation

Hi,
Under your infopackage, you would find datasource associated with it. If its a standard datasource, the best option for you to find the source table would be to search in help.sap.com.
If it is LO datasource, go to LBWE in your source system and search for your datasource. Click on Maintenance. The pop-up would give fields starting with MCVBAP VBELN. Here VBELN is field, VBAP is table and MC is just prefix.
If your datasource is a generic datasource, go to RSO2 in source system. Check whether it is based on table/ view. This gives your straightforward answer. If its based on function module, get the function module and go to SE37, here you can see the logic and identify the tables used. If its based on infosets. Copy the infoset, go to SQ02 and search for the base table.
hope this was helpful

Info Package ABAP Routine

Hi
For FIGL_4 there is both open items and closed items. i want to filter only Open Items Accounting doc no's records for Customers,Vendors,GL account at info package level.
There are 3 ODS's in BW side for Open items Customers,Vendors,GL accounts. i want to filter open items based on these 3 ODS's Active data table.But i am getting error when i execute the request in Info Package.
*Error Message "For sel. field 'BELNR ', no selection with SIGN = ' '; OPTION ' ' allowed     RSM1     607     *
Below is the Info package Routine code
program conversion_routine.
Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rssdlrange.
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
TABLES: /BIC/AZOCFFIGL00,/BIC/AZOCFBSID00,/BIC/AZOCFBSIS00
        ,/BIC/AZOCFBSIK00.
DATA:   ...
TYPES : BEGIN OF TY_ZOCFBSID,
        /BIC/ZMCFADCNO LIKE /BIC/AZOCFBSID00-/BIC/ZMCFADCNO,
        END OF TY_ZOCFBSID.
TYPES : BEGIN OF TY_ZOCFBSIS,
        /BIC/ZMCFADCNO LIKE /BIC/AZOCFBSIS00-/BIC/ZMCFADCNO,
        END OF TY_ZOCFBSIS.
TYPES : BEGIN OF TY_ZOCFBSIK,
        /BIC/ZMCFADCNO LIKE /BIC/AZOCFBSIK00-/BIC/ZMCFADCNO,
        END OF TY_ZOCFBSIK.
DATA : TB_ZOCFBSIS TYPE TABLE OF TY_ZOCFBSIS WITH HEADER LINE,
       WA_ZOCFBSIS TYPE TY_ZOCFBSIS.
DATA : TB_ZOCFBSID TYPE TABLE OF TY_ZOCFBSID WITH HEADER LINE,
       WA_ZOCFBSID TYPE TY_ZOCFBSID.
DATA : TB_ZOCFBSIK TYPE TABLE OF TY_ZOCFBSIK WITH HEADER LINE,
       WA_ZOCFBSIK TYPE TY_ZOCFBSIK,
       FLAG TYPE I.
$$ end of global - insert your declaration only before this line   -
    InfoObject      = ZMCFADCNO
    Fieldname       = BELNR
    data type       = CHAR
    length          = 000010
    convexit        = ALPHA
form compute_BELNR
tables   l_t_range      structure rssdlrange
using    p_infopackage type rslogdpid
           p_fieldname    type rsfnm
changing p_subrc        like sy-subrc.
      Insert source code to current selection field
$$ begin of routine - insert your code only below this line        -
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'BELNR'.
          l_idx = sy-tabix.
       SELECT
       /BIC/ZMCFADCNO
       FROM /BIC/AZOCFBSID00
       INTO TABLE TB_ZOCFBSID.
        SELECT
        /BIC/ZMCFADCNO
        FROM /BIC/AZOCFBSIK00
        INTO TABLE TB_ZOCFBSIK.
        SELECT
        /BIC/ZMCFADCNO
        FROM /BIC/AZOCFBSIS00
        INTO TABLE TB_ZOCFBSIS.
       LOOP AT TB_ZOCFBSID INTO WA_ZOCFBSID.
       l_t_range-sign = 'I'.
       l_t_range-option = 'EQ'.
       l_t_range-low = WA_ZOCFBSID-/BIC/ZMCFADCNO.
       Append l_t_range.
       CLEAR l_t_range.
       ENDLOOP.
       LOOP AT TB_ZOCFBSIK INTO WA_ZOCFBSIK.
       l_t_range-sign = 'I'.
       l_t_range-option = 'EQ'.
       l_t_range-low = WA_ZOCFBSIK-/BIC/ZMCFADCNO.
       Append l_t_range.
       CLEAR l_t_range.
       ENDLOOP.
       LOOP AT TB_ZOCFBSIS INTO WA_ZOCFBSIK.
       l_t_range-sign = 'I'.
       l_t_range-option = 'EQ'.
       l_t_range-low = WA_ZOCFBSIS-/BIC/ZMCFADCNO.
       Append l_t_range.
       CLEAR l_t_range.
       ENDLOOP.
          modify l_t_range index l_idx.
          p_subrc = 0.
$$ end of routine - insert your code only before this line         -
Edited by: AtulMohan Mishra on Dec 27, 2010 1:11 PM

Hi
Now i am facing an error during data extraction from Source system
error message in BW system "Error occurred in the data selection " Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
when i checked in SM37 (R3 system) i found the job has been cancelled and Log of this job says
"Asynchronous sending of InfoIDOCs 2 in task 0001 (0 parallel tasks) DATASOURCE = 0FI_GL_4
ABAP/4 processor: SAPSQL_WHERE_CANT_SCAN
Job cancelled      "
it seems to me the Problem in Routine at Info Package level.
My Requirement is to fetch only those Accounting Doc. No. RECORDS from 0FI_GL_4 data source which are present in Active data table of BSID,BSIK,BSIS ODS's.
So i want to put logic at Info Package routine .
1) fetch all Accounting Doc. No. from Active data table of BSID,BSIK,BSIS Ods's and Match those Accounting Doc. No.'s with the 0FI_GL_4 data source Accounting Doc. No's.if a Accounting Doc. No. match with 0FI_GL_4 data source Accounting Doc no then that corresponding record from 0FI_GL_4 will go to the ODS
Regards
Atul

Short dump while executing info package in 3.5 data flow?

Hi,
i am getting short dump while executing info package while executing info package. it was working perfectly 2 days back suddenly it is giving this problem. it is a full load for info object text data and i have only 600 records. when i tried with " only info package" it is working perfectly n bringing the data into PSA. But when i use "PSA and the into data target" it is giving short dump.
i replicated Data source and also i activated transfer rules, update rules still it is not working. When i check with another info objects it is working perfectly fine. i dont know what is wrong with only particular info object.
Please find attached short dump.
Thanks

Hi,
When you load transaction data I think there is a deadlock.
Check in the process overview (transaction SM50) the waiting processes are in program SAPLSENA .
The program SAPLSENA is the lock handler tool.
Also check if ACR is running on this target while your load is happening.
Check in SM12 if there are any lock entries for the Infoobject to which you are loading data and on RSICCONT table .
Try reloading after deleting the locks manually.
Regards.

Error while transporting PCs and Info packages frm dev to qa

Hello Guyz
First of all, I am new to this forum. Heard a lot about it, and I hope I can learn a lot by the exchange of information in this forum. I ve already gone through so many threads, and have gained a lot of insight in BW.
I have an issue, where I am transporting process chains and info packages from dev to qa. But the transports have thrown errors, saying that the 'Source System XXXCLNTXXX does not exist and info package has been deleted'.
My question: How can I transport these objects in such a way that the loads which were going from ECCDEV to BWDEV, now go from ECCQA to BWQA? Are there any settings in SE09 or SE10 or somewhere in BW where I can do this?
Thanks in advance.
Atul.

Hi Atul........
There is no such settings........check this.......
How to transport BW object
Anyways.....I think there is some problem in the Client name.......Just check the Source system name in RSA1...........if it has been changed somehow........then run transaction BDLS and change the source system assignment........
Regards,
Debjani......

Error Handling in info-package strangely doesn't work

Dear All,
I'm trying to load master-data from R3 containing time-dependent attributes which, I know, are sometimes overlapping. As I still want to load the correct part of data, i've set Processing - via PSA and Error Handling - "Updating valid records, reporting possible" with number of errors more than the dataset itself. However, the load still fails and what is more interesting, all records in PSA are marked as "green" whereas the errors are reported in a log.
And what makes me wonder even more is that the same info-package from the same DS is loaded in a test system OK - with errors handled and "trashed" in PSA and remaining updated in Info-Object MD.
Does anybody can help to resolve this strange problem as i can't honestly see the difference in global settings of test and productive systems that could allow this...
Thank you in advance

Hi,
Here you are extracting data for master data with one of the attribute as time dependent . So there are two more fileds are neccessary in extraction ,i.e, 'from date' and 'to date'.
And it seems there is overlapping of this range for two records. Make sure it in PSA with record numbers. And make sure there will be no overlapping.
With rgds,
Anil Kumar Sharma .P

Errors in info package

hi friends,
please some one can explain me the errors occurs in info package like referential integrity failures, due to locks, etc.
please some one explain about this points.
thanks in advance.

Hi sreekanth,
Referential Integrity: Its a DataBase concept which combines(logically) the data of multiple table with the master table. Here master table has the primary key and rest of the tables have the same key as forienkey.
Here we use the characteristic (or combinations of Chars) call as referential char.
check this.
you might be knowing that generally refrential integrity is concerned with nothing but primary key and foriegn key relationship. Generally we use to check uniqueness of records.
In sap we use it during flexible updation...to check the data records of transaction data and master data.
In other words, to check before loading of data, that whether loading will be properly or not.
we will check(tick) the option in the maintainance of the
infosource--> communication structure
it will be better if you clearly mention your problem, if further help is needed.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/14c43bb7137503e10000000a11402f/content.htm
Referential integrity is the property that guarantees that values from one column depend on values from another column.This property is enforced through integrity costraints....
see this link...
http://help.sap.com/saphelp_nw2004s/helpdata/en/6d/117c5fd14811d2a97400a0c9449261/content.htm
Please find the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=referential%20integrity&cat=sdn_all.
Enble the referential integrity at Communication structure***
Locking Errors:
1.These Locking error are due to If Some body using same Infopak when ur using that same Infopak.This is Not a major problem.
2. If any Request has lock u can Unlock that by using se03.
***Assign Points If Helpful****
Thanks,
kiran.

URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS

Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh Rana

I got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh

Problem Reloading Info cube after Transport

I have made some changes to a cubes dimensions. Then I transported these to Test and loaded the cube there, all worked fine. Then i deleted all the data from the same cube in production before transporting it up.
In production my cube was clean and ready to be reloaded. When kicking off individual info packages I am recieving this message.
"No requests are deleted from your info cube ZEXTSERV (Provisionally, as routine, and formula evaluations for the runtime of other selection conditions can occur.
I then gives me the option to either continue or cancel. I pressed continue and the data loaded fine........because I knew I had already deleted old requests before transporting.
***all my loads are full loads....not deltas.
Will this cause a problem if the info packages are in a process chain???
I am using BI.7
Please help

there shud not be any problem in that..
Did u deleted the total content from the cube? I mean both Fact table as well as the Dimension table as well?
I dont think that there will be any more problems in ur cube...
Just look at one more load to ur Cube.. I hope that this message wont come once again....!!!
Will this cause a problem if the info packages are in a process chain???
NO... its not the issue..
Thanks

Error while openign the info Package

Hi , i am getting the following short dump error while trying to open the info package. these are the Ipaks which were in use before but now getting short dump after R/3 upgrade.
Can you please help me
"MESSAGE_TYPE_X" C
"SAPLRSS1" or "LRSS1F11"
"RSM1_CHECK_FOR_DELTAUPD"
Thanks.

Hi Chris,
Please check OSS note: 852443 - Dump in include LRSSMU36/RSSM_OLTPSOURCE_SELECTIONS
There are also a couple of threads here talking about the same problem.
Hope this helps...

Running the info package twice in bw 3.5?

Hi all,
There is a process chain existing to load
ods 1 to ods 2 for a particular region on a different time sone
I need to load the same ods 1 to ods 2 for another region in a indian time zone.
When i look at the new procees chain i am getting
infopackage -> ods activation -> further processing -> infopackage -> ods activation - fruther processing!!.
But the existing process chain looks like
infopackage -> ods activation -> info package -> ods activation!!
which has to be the same for the new process chain too.
When i run the new process chain
infopackage -> ods activation -> further processing -> infopackage -> ods activation - fruther processing!!.
It is causing the issues it doesn gets executed after further processing!!
Thanks
Pooja

Hi Pooja
I think there is still some build problem.
In you existing process , infopackage -> ods activation -> further processing -> infopackage -> ods activation - fruther processing!!,
Just remove 3rd and 6th step. After removing these 2, you have to link as below:
start -
> infopackage 1-> ods activation for ods1 -> infopackage2 -> ods activation2 . Please also check the variants for each existing process to make sure you have added correct IP and ODS for all the processes.
Cheers
Chanda

Problem in info package

Similar Messages

Maybe you are looking for