Problem in initializing media core

I have installed AE CS4 everything was ok until i hav installed quick time. But after installing quick time 7.6.8 I hav a problem with starting AE,the prgm ends while initializing media core. some body please help me....

There's some information about possible causes and solutions here:
http://kb2.adobe.com/cps/857/cpsid_85711.html

Similar Messages

After Effects Hangs on Initializing Media Core and Only Uses .40 GB or RAM

I actually have either 2 separate issues or one that effects both. The fist one is that once After Effects loads, I generally can't RAM preview for 1080p quality, and about 6-20 frames for 720p, depending on if I get lucky or not. I went into Memory and Multiprocessing in the preference and no matter what I set the RAM per CPU to, the Actual CPUs that will be used is always 0, so then I go to details and it says "Installed RAM: 11.99 GB." "Current RAM Usage: .28 GB" "Allowed RAM Usage: .40GB." Whenever I render a video it always uses up to 3% or 4% of my RAM but never any higher.
And the second problem...
Whenever I start After Effects CS6 (and it happened in CS5.5) Trials it hangs on Initializing Media Core, for about 5 minutes, then it says Quicktime isn't installed. To fix that problem I have tried everything I could find in the 30+ hours I have spent on that problem. Turning off all firewalls, anti-virus, etc, updating, reinstalling, and everything in between. (Also I see dynamiclinkmanager.exe and AfterFX.exe but not QT32.exe or PProHeadless.exe which need to be allowed through firewalls and such)
I'm using After Effects CS6
Windows 7 64-bit
12 GB of RAM
Quicktime 7.7.2 and Itunes 10.6.3.25 Any ideas would be very much appreciated, thanks! ^.^

Ok, well I installed updates to my graphics driver, After Effects, and Windows, and unfortunately nothing worked, but from reading other forums, when I am using After Effects I should see QT32server.exe right? That doesn't show up in processes, but also I installed Premiere Pro to test dynamic link, and I always get an error "Failed to connect to Dynamic Link Manager." and when I hit Ctrl + Enter it says the same thing. ( I actually don't know what that hotkey does ) any ideas at all would be very much appreciated
Edit: I started thinking about it, my driver is an Nvidia GeForce GTS 450, which I didn't see on Adobe's supported list, is this the culprit behind the render problems?
Message was edited by: Jeremiah1119

After Effects hangs on "initializing Media Core"

I might be off subject here, but my AE CS6 would not complete the start up and simply hang at "INITIALIZING MEDIA CORE".
After finding some info about that, but for CS5, apparently a Quick Time codec problem, I got rid of PERIAN, and all is well now, it start right up.
I am using an old 2007 2.66 dual core, with 9GB and a 5770 graphic card. Not ultra spiffy, but does the job...
[branched from unrelated thread by moderator]

Ok, well I installed updates to my graphics driver, After Effects, and Windows, and unfortunately nothing worked, but from reading other forums, when I am using After Effects I should see QT32server.exe right? That doesn't show up in processes, but also I installed Premiere Pro to test dynamic link, and I always get an error "Failed to connect to Dynamic Link Manager." and when I hit Ctrl + Enter it says the same thing. ( I actually don't know what that hotkey does ) any ideas at all would be very much appreciated
Edit: I started thinking about it, my driver is an Nvidia GeForce GTS 450, which I didn't see on Adobe's supported list, is this the culprit behind the render problems?
Message was edited by: Jeremiah1119

After Effects Hanging on Initializing Media Core

I downloaded the trial for After Effects CC 2014 to make sure it would work on my computer, but when I try to open it the start up screen hangs at initialing media core. I made sure that After Effects was allowed through the firewall, but it's still not working. I want to buy it, but I can't if it won't start. Please help!

I can't promise this will help and I have email from Adobe support that specifically says this won't work and isn't the problem. So if you want to try this, it's just working advice from some shlub who wants the software to work and doesn't care whose feelings are hurt. This response fixes all versions of After Effects and Premiere Pro in the CC and CC 2014 series. The file ExporterAVI.prm is bad. It has had a flaw since around 2013. Now you can fix this taking no chance with your computer or installation, so if you follow this carefully you'll do nothing to hurt your setup and if it doesn't work, just change it back.
Each application has it's separate copy in it's separate folder, so just go to C:\Program Files\Adobe\Adobe After Effects CC\Support Files\(Media Core Plug-ins)\Common
Find the file called ExporterAVI.prm and rename it (I always just rename it to ExporterAVI.prmold
Now run After Effects CC. If it loads, you found the problem. If it doesn't rename it back to it's original name and, no harm, no foul.
If it does load, know that you can't export an AVI file. You need a PRM file that works. I always keep one saved. It will work for the CC version and the CC 2014 version. It is from an old copy of the original CC version of both programs.t is 159Kb and dated 8/20/2013. The properties detail tab actually says it was created on 3/27/2012. Every time an update come out that affects this, it will stop working, so just rename it again and put back in the old file and you'll get full functionality. I've had to use it six time since the update after 8/2013, but I have full functionality of all four versions of both programs, but it won't work with the current version of ExporterAVI.prm. So far, that means every time it loads an update, I have to fix the file in the After Effects CC, After Effects CC 2014, Premiere Pro CC and Premiere Pro CC 2014. The same file is used in Prelude, Encore and Media Encoder, but I don't use those programs. so I don't know if they freeze up or not.
Also look at the last entry in your plugin loading.log file, it should say something like:
Loading E:\Win8\Program Files\Adobe\Adobe After Effects CC 2014\Support Files\(Media Core plug-ins)\Common\ExporterAVI.prm
Invalid registry entry found so the plugin will be loaded from disk.
Loading from disk...
and then the log ends and the program freezes.
p.s. If you don't have a copy of the old version of the file, call Adobe, don't ask me - I can't give copies of it to anyone, I just make them because I keep backups before every update.

After effects is stuck on initializing media core

Well the title says it all. When ever i try to start up After Effects it just gets stuck on initializing media core. I looked on one of you're posts where it said enable a few of adobe products to be allowed on the firewall and i did but it still wont open it. Please respond asap.

Considering the wealth of information you've supplied about your system, the versions of software you're running and any ancillary cards you have have installed, here's my best guess given the facts at hand: AE doesn't like you any more. What did you do to make it so angry with you?
First, you should apologize to AE.
Then you should UNINSTALL Quicktime X and install the latest version of QT7.

After Effects CC 2014 initializing Media core

Hello Everyone,
So for about the past month or so, After Effects CC 2014 hasn't been opening for me. Every time I open the program, it gets stuck on initializing Mediacor and then proceeds to crash. I have been told that it is a misplaced file during installation, but everything is where it should be. Alo, I'm using Lenovo Y50-90 Gaming Laptop with an Intel Core i7 4700HQ processor and my graphics card is a NVIDIA Geforce GTX 860M 2GB.I am also using Window's 8. Any and all help will be immediately grateful.
Thak you

Hang| Initializing MediaCore | Startup screen | After Effects, Premiere Pro

Computer Freezes when Initializing Media Core

So as the title says. What I've done so far to try and fix the problem is take out all plugins, uninstall and re install, and even slap quick time a bunch of times.
Nothing seems to work and the only thing I can do is remove the AsioWdm so that the mediacore fails to initialize and while I can still make and edit projects, I lost the aility to make movies because of it. I didn't use to have to do this and all my other adobe programs work just fine. After Effects is also fully updated.
My specs are:
Windows 7 64 bit
8G RAM
Nvidia GTX 480
Dual Core Extreme

Ah-ha~ I fixed it somehow. What I did was reinstall my graphics drivers, uninstalled after effects and checked the "remove prefferences option", and then re-installed the program.
Stuff I noticed:
After the re-install, the program told me I needed to reinstall "ImporterFastMPEG" "ImporterXDCAMEX" and "ImporterXDCAMHD". So I deleted those files and re-ran After Effects and it re-installed them.
Before and After:
I looked over the folder and compared it to before the re-install and it turned out my extensions folder was completely missing as well.
Message was edited by: RandomOldFife

Still stucked on initializing media core then-quick time is not installed-then dynamic link error-th

hello everyone
I'm on Mac Os 10.7.4 with a Mb Pro 2,5 Core i7
I've been searching for 4 month now to install Ae CS6 & Premiere
I tried to remove the QT components
I switched off my internet and stopped my little snitch
The CUDA was installed due to a migratin from my MacPro
(CS6 run on it ok)
I deleted it in the system pref pan with control delete
I upgrade on 6,0,4
I try many desinstall / reinstall
useless…: (
anybody has an idea ?
thank you very much for your help
Nicolas (sorry for my french english)

sure it's my last option !
I should take a break and reinstall everything !
but it takes such a long time and there's always missing parts…
before I was looking for a lighter solution
cause there"s many thread on this starting conflict
I was not sure to have try every path
Now I'm in the flow
I'll take few days before the next peak
thank you for your answer
regards
Nicolas

After effects hangs on initializing media core and give that error

i have I7 4770
gtx 760
4g ram

oh yeah its obvious from pic that im using win 7 and i dont know if i have installed Service Pack 1 update with no genuine one

Problema After Effects CS6 "inizializzazione media core"

Scusate ho un problema da due giorni ... Ho installato la versione di prova di Adobe Master Collection CS6: tutti i programmi funzionano bene, solo After Effects e Premiere Pro non funzionano. Io sono più interessato ad after effects, rimane con la schermata " inizializzazione media core" e non va avanti. Ho provato a disinstallarlo e reinstallarlo, ma non ha funzionato, l'ho disinstallato e installato quick time, ma non ha funzionato. Cosa devo fare?
ENGLISH
Sorry I have a problem for two days ... I installed the trial version of adobe master collection cs6: all programs work fine, only After Effects and Premiere Pro do not work. I'm more interested after effects, remains with the screen "initializing media core" and does not go forward. I tried to uninstall it and then reinstall it but it did not work, I uninstalled it and installed quick time, but it did not work. What should I do?

If it crashes due to text, remove any fonts you may have recently added. Otehrwise you should consider rebuilding your system. Sounds liek you realyl made a mess somewhere that cannot be resolved by just messing with AE, QT and your graphics driver. In particular stay away from installing any CoDec packs. K-Lite is known to cause a lot of damage to Adobe apps...
Mylenium

AE CS3 crash on Media Core initializing

I have done an exhaustive search before I got to this point.
As with many other people, AE CS3 crashes on initializing Media Core.
I did everything save put a voodoo hex on Adobe to get this to work.
I finally figured out that the cuplrit to my crashing was the file "Adobe Editing Modes.xml" in the "Editing Modes" folder inside my Applications/AE/Contents/Plug-ins/MediaCore.
I went one by one and removed all the files and the one that caused the crash was the aforementioned "Adobe Editing Modes.xml".
WIth that removed, AE will finally open but at startup I now get a prompt "After Effects warning: failed to initialize Media Core".
I'm assuming AE won't run properly without this offending file.
My question ... how do i fix this issue?
I'm on a MBP. OSX 10.6.8. AE version 8.0x247.
Any help is appreciated for this noob who's trying to get into video editing.

You don't edit video with AE, it's still a compositing program. Reinstate that XML file. Reinstall the program or move it back into place. Run the Creative Suite Cleaner Tool if necessary. The rest is not really clear but Media Core crashes can have all sorts of causes from permissions issues to graphics card and configuration issues. May also simply be a compatibility issue with newer versions of OSX. CS3, is, aftwer all, a few years old now.... Check the user permissions on your Library:Application Support: Adobe folders, buth globally and the user branch. Same for the Preferences folders and so on... also check your Quicktime and system audio/ video settings....
Mylenium

Encore CS6 doesn't open after the process "Initializing Media Layer"

When Encore CS6 loads, the program just disappears. The problem occurs at the process "Initializing Media Layer".
PC Configuration: Core i7950, Asus P6TD Deluxe, 12GB DDR3 1600MHZ, Quadro K4000, SSD for the system, Seagate Constellation 7200rpm for video editing.
Encore is downloaded as part of Premiere Pro CS6 at Creative Cloud.
I am desperate, as I cannot deliver my Blu-ray's and DVD's without Encore.
I would be grateful with your help.
Thank you,
Stavros Symeonidis

When Encore CS6 loads, the program just disappears. The problem occurs at the process "Initializing Media Layer".
Based on the few references I see to this error, I would do a reinstall. This is no guarantee.
I assume that you are opening Encore without starting it by opening a project.
I do not know what special problems may be involved in the relationship of CC installs and Encore (and the order of various installations), but I do not think this error should result.

Could not complete the Render Video command because of a problem with Adobe Media Encoder.

So initially, my problem was solved, but it stopped working again. Same issue. I tried installing the media encoder app, but no luck please help!
Here's the original post:
Hello, I'm running a macbook pro retina, and previously I was able to render video with no issue, and now this is popping up. I've tried deleting and reinstalling photoshop, but it was not helpful. I would very much appreciate any help or guidance. Thanks!
Here's the error message I get:
Could not complete the Render Video command because of a problem with Adobe Media Encoder.
Here's the original thread: Could not complete the Render Video command because of a problem with Adobe Media Encoder.

Have you tried re-installing Photoshop?
Benjamin

Adobe Media Core CS6 has stopped working

Hi Folks,
I'm running Adobe Creative suite CS6 on Windows 7, Dell T7600 with 64G RAM. Quicktime Pro 7.74, up to date.
When I try to export a sequence using Quicktime as the Export format, I get the error, 'Adobe Media Core CS6 has stopped working'
Here are the details:
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Adobe QT32 Server.exe
Application Version:                           6.0.5.0
Application Timestamp:                     5211c5c2
Fault Module Name:                          QuickTimeH264.qtx
Fault Module Version:                        7.74.80.86
Fault Module Timestamp:                  5180f338
Exception Code:                                  c0000005
Exception Offset:                                001f371d
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             6153
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I suspect this could be related to Quicktime.
Any help is much appreciated.
Thanks
Ken

More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Adobe Media Core CS6 has stopped working (Premiere Pro Family CS6)

I have recently upgraded my computer to better run Premiere and Encore but have now encountered the error "Adobe Media Core CS6 has stopped working". The program will then boot even after I choose either of the two options that say they should close the program. They both seem to run fine after getting past the error but I would rather not have to see it everytime and know that something is amis. I have tried uninstalling and reinstalling Quicktime like some other users have suggested but I think my problem may lie elsewhere. Can anyone help me out?
Problem Event Name:
APPCRASH
Application Name:
Adobe QT32 Server.exe
Application Version:
6.0.1.0
Application Timestamp:
5043716a
Fault Module Name:
cwalsp.dll
Fault Module Version:
2.8.13.1
Fault Module Timestamp:
4f33e357
Exception Code:
c0000005
Exception Offset:
00017914
OS Version:
6.1.7601.2.1.0.256.1
Locale ID:
1033
Additional Information 1:
0a9e
Additional Information 2:
0a9e372d3b4ad19135b953a78882e789
Additional Information 3:
0a9e
Additional Information 4:
0a9e372d3b4ad19135b953a78882e789

cwalsp.dll
Find out where that's coming from and what it does, then reinstall or uninstall the program it came with. Pertinent information suggests that this may be a DLL of a DRM client for games that interferes with local ports...
Mylenium

Problem in initializing media core

Similar Messages

Maybe you are looking for