Problem in inst. ST-PI & Upgd. of PI_BASIS

Hi All,
We are in the process of upgrading SAP 4.7 to ECC 6.0
We have upgraded our Oracle from 9i to 10 g and run the upgrade prepare.
Now upgrade prepare statistics says that we need to upgrade ST-PI & PI_Basis.
Currently we have (SAP R/3 4.7*200):
Kernel: Release 640, Patch Level: 295, ABAP Load: 1521
SAP Basis: 620 SP49
SAP_ABA: 620 SP49
PI_BASIS: 2004_1_620
ABAP_PLUS: 100 SP13
ST-PI: There is no entry in my system
I have tried to install ST-PI with the CD KITLRCA.CAR and upgrade the PI_BASIS through the CD 51030956.
But in SAINT (tried in SPAM also) t-code after uploading the CDs the entry of the ST-PI & PI_BASIS_2005 is not appearing and hence not able to upgrade these two components.
Please suggest how to install ST-PI with SP8 and 2005_PI_BASIS?
Regards,
Souren

Hi Souren Sharma,
I think you have entered the wrong package or have not implemented the packages atall.(Only uploaded the the packages)
Download below packages from service market place.
https://websmp102.sap-ag.de/swdc
Download->Installations and Upgrades->Installations and Upgrades - Entry by Application Group->Plug-Ins ->SAP Solution Tools->ST-PI->ST-PI 2005_1_620->Installation
Then download below file.
SAPKITLQGA SAP Solution Tools Plug-In (ST-PI 2005_1_620)
Then download the support package for ST-PI
Support Packages and Patches - >Entry by Application Group ->Plug-Ins->SAP Solution Tools->ST-PI>ST-PI 2005_1_620
SAPKITLQG8
Download 2005_PI_BASIS
Download->Installations and Upgrades->Installations and Upgrades - Entry by Application Group->Plug-Ins ->SAP Plug-In ->PI_BASIS->PI_BASIS 2005_1_620->Delta Upgrade
Download below file
PI_BASIS 2005_1_620
Delta Upgrade
51030955 CD PI Basis 2005.1_6.20 Inst./Upgrade
Apply the plug-ins in SAINT and support package in SPAM.
You may have to apply all support packages upto SAPKITLQG8
Regards
Ashok Dalai

Similar Messages

TP tool hangs during installation of PI_BASIS Patch 6

Hello everyone,
I'm facing the problem that I can't get the PI_BASIS Patch (SAPKIPYJ76) installed (on MySAP ERP 2005 on SLES 9). It still does not go on in the phase 'IMPORT_PROPER'. In SM50 the process is in status "On Hold", reason "RFC". There is no error in the regarding logs, and the CPU utilization is near to 0% when no other user is logged in. I have searched through Sapnet and this forum, but couldn't get a hint to solve the problem.
I would be very glad when anybody could help me.
Regards,
Christian

Hi Mike (and everyone else),
i could reproduce the error. When the installation hangs in phase DDIC_ACTIVATION, I can cancel the following work process in SM66:
Work process no.                         6
           Type                          BTC
           Process ID                    8087
           Status                        stopped
           Reason for waiting            CPIC
           Restart                       Yes
           Terminations                  1
Waiting for semaphore
When i now cancel the BGD process in SM50, too, the installation will continue normally.
Have you any idea what the reason is?
Best regards,
Christian

This application is not compatible with your device and cannot be loaded

Hi,
I have been trying to load an application to my BB 9000 since a monday and getting this error "This application is not compatible with your device and cannot be loaded".
As evident, I am new to BlackBerry development and got to port an existing J2ME project on BB 9000.
To load application I am using
- BB Dektop software 5 (latest)
- BB Device Software 4.6 is installed (which is the version of BB 9000 as well)
I am able to load sample JDE 4.6 applications but I build my project through same JDE and through eclipse (JDE compoment 4.6.0.19) as well but couldn't load it,
I even signed my app since I am using net.rim.device.api.servicebook api which requries signing.
Can someone please explain me
1) why this error occurs in first place
2) how to setup right envioroment to load an application on a given BB handset (BB 9000 vodafon India to be specific)
3) How would manage this process on a single machine if I have 4-5 different BB handsets.
I shall be thanful for any logical pointer to solution to these problems.

Hi,
The main problem with your genrated ALX file. I think in your ALX file contains <fileset Java="1.49" _blackberryVersion="[5.0.0)"> TAG and remove the _blackberryVersion attribute. Then it will work.
So your final ALX file contains
<loader version="1.0">
   <application id="App">
       <name >
           App1
       </name>
       <description >
       </description>
       <version >
           1.0.0
       </version>
       <vendor >
            Vim
       </vendor>
       <copyright >
           Copyright (c) 2010
       </copyright>
       <fileset Java="1.49">
           <directory >
               5.0.0
           </directory>
           <files >
               App.cod
           </files>
       </fileset>
   </application>
</loader>
Even thought it is not installed then make sure that your application may not delete from your device. Select the application and click on delete button in Desktop manager.
Still u didnt slove the problem then insted of
<directory >
               5.0.0
    </directory>
replace as
<directory >
</directory>
Regards:
Jitendra.B
Vimukti technologies Pvt Ltd
Project Manager

Line console issue

I was working on cisco 1841 router and suddenly I can't have output from the line con 0 on my monitor , I had connection to the router with telnet and ssh
but I've erased the config thinking that it would solve the problem but insted I'm locked out the device I can have access to another device with the same console connection so the cables won't be the problem, the only thing that shows me when the router reboot and when an interface change the status

I'm using putty but I've tried hyper terminal and it's the same
from the 4 devices that have that issue I can access one device so I did show line con 0 to see where in the
difference and the output was the following
SW1#sh line con 0
      Tty   Typ     Tx/Rx    A   Modem Roty   AccO AccI   Uses   Noise Overruns   Int
*      0    CTY                 -       -          -           -        -          2       6          0/0         -
SW2#sh line con 0
    Tty    Typ     Tx/Rx     A   Modem Roty   AccO AccI   Uses   Noise Overruns   Int
*    0     CTY                  -        -          -         -          -         0       1          0/0         -
SW1 is the device with the line con problem
SW2 is working just fine

Cancel of J1IEX part 1 and part 2 for the cancel GR

Hi,
I have on eproblem , user captured the Excise invoice with J1IEX part1 and GR done also the part2 is posted, and now we want to reverse that, the problem is insted of Cancelling GR with MIGO cancellation user have done it by MBST and as MBST is not supported for CIN due to this no entry is created for part 1 reversal, now how to proceed further.
regards,
zafar

zafar
follow the return procedure with excise
Once you post the excise amount In the SAP System, therefore, you have to reverse CENVAT posting correspondingly.
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
Laxman

When i first inst photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch photoshop it say " photoshop detected graphic hardware is not officially supported if you experience problem ple

when i first inst Photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch Photoshop it say " Photoshop detected graphic hardware is not officially supported if you experience problem please unchecked the use graphic processor check box in the performance panel of the preference dialog" Is this the cause? If so how to uncheck that box? Thanks

Your video card is underpowered for the task.
Go to Photoshop > Preferences > Performance and click on the tick mark next to the box labeled "Use Graphics Processor":

I updated iTunes to 10.4 version and now it doesn't start and sen a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regard

I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards

Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver!

HT203687 Trying to install iCloud on a new Toshiba laptop so I can sync with my iPad and iPhone. I get error message HRRESULT:OX8007OBC9, says the installer encountered errors before iCloud Control Panel 2.0 could be installed. Same problem trying to inst

Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the same problem trying to istall iTunes.

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Problem in SAINT with updating PI_BASIS 2006_700

Dear All,
I have a system ECC 6.0 with OS Windows 2003, oracle 10.2g as Database.
I wanted to installed Croatian language in my system when uploading from SMLT it showed me that the system need PI_BASIS 2006_700 whereas my system is having PI_BASIS_2005_700 with patch
SAPKIPYJ7G PI_BASIS 2005_1_700: patch 0016
But from T-Code SPAM, PI_BASIS 2006 u2018s patch
SAPKIPYM01 PI_BASIS 2006_1_700: patch 0001 is in yellow state.
I have downloaded the SAPKIPYM01 patch from service market place and from t-code saint tried to update but it is running from last 6 hrs.
Last log file (E:\usr\sap\trans\log), generated 4 hrs ago.
Something might have gone wrong, that is why I have stopped it in IMPORT_PROPER step.
From SPAM it shows updated component PI_BASIS 2006_700 from PI_BASIS 2005_700 and its patch SAPKIPYM01 (2006)is in red color (cancel)
How to recover from it?
From saint the component showing
SAPKINBC9A -- installation -
PI_BASIS
SAPKIPYM01 - support package--PI_BASIS
Add-on installation terminated in IMPORT_PROPER step
Now my doubt whether base package of PI_BASIS 2006_700 needs to be updated first from saint then start updating patch??
Please suggestu2026.
Regards,
Souren

SAPKINBC9A              PI_BASIS 2006_1_700: Add-On Installation
    EC6        System EC6
               Generate Transport Information File      12.08.2008 13:22:46    (0) Successfully Completed
               Import Request Piece List                12.08.2008 13:23:05    (4) Ended with Warning
               Test Import                              12.08.2008 13:23:39    (4) Ended with Warning
               Import ABAP Dictionary Objects           12.08.2008 13:28:43    (4) Ended with Warning
               ABAP Dictionary Activation               12.08.2008 13:32:33    (4) Ended with Warning
               Import                                   12.08.2008 17:53:43    (0) Successfully Completed
   Import steps not specific to transport request
          ABAP Dictionary Distribution             12.08.2008 13:32:56    (0) Successfully Completed
          Activate inactive runtime objects        12.08.2008 13:34:07    (4) Ended with Warning
          Activate inactive runtime objects        12.08.2008 15:43:14    (0) Successfully Completed
SAPKIPYM01              PI_BASIS 2006_1_700: patch 0001
    EC6        System EC6
               Generate Transport Information File      12.08.2008 13:22:48    (0) Successfully Completed
               Import Request Piece List                12.08.2008 13:23:06    (0) Successfully Completed
               Test Import                              12.08.2008 13:23:40    (0) Successfully Completed
               Import ABAP Dictionary Objects           12.08.2008 13:28:50    (0) Successfully Completed
               ABAP Dictionary Activation               12.08.2008 13:32:33    (4) Ended with Warning
               Import                                   12.08.2008 17:53:44    (0) Successfully Completed
        Import steps not specific to transport request
               ABAP Dictionary Distribution             12.08.2008 13:32:56    (0) Successfully Completed
               Activate inactive runtime objects        12.08.2008 13:34:07    (4) Ended with Warning
               Activate inactive runtime objects        12.08.2008 15:43:14    (0) Successfully Completed
No Error has been foud out some of the table the import activity is not getting because of that the warning has come....
Now my querry is my above mentioned steps are correct??
6hrs time is normal??
If it is yes can I restart it from SAINT??

MINISAP Inst. Problem. MBSDATA1.MDF File format not recognizable

Hello friends,
I am facing one problem. I have completely installed MINISAP successfully as per the instructions given in the installtion CD.
Now the system is not able to recognize the file format of the file MBSDATA1.MBS
This is the file that is used to start the MINISAP. Unless this file run, I cannot run MINISAP.
Please help. Points will be rewarded generously for the solution.
Regards,
Navin
Message was edited by:
Navin Guru

Hi
Check this link..
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
Here are the link which will explain the procedure
http://www.sap-img.com/basis/sap-ides-installation-procedure-for-sap-install-on-w2k-server.htm
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
Regards
Anji

Problems on start up with Snow Leopard after T-mobile mobile broadband inst

Hi All
I am a new mac user, and this is my first post, so please forgive me if I am repeating this issue.
I have recently upgraded my mac os to Snow leopard.
The issue that i have is that is that I installed a new USB mobile broadband stick from T-mobile, (which I was told by T-mobile is tested) when I tried to restard the Mac Book all I got was the Apple icon and it didnt boot up.
I spoke with mac support who were very helpful. They guided me and I ended up having to re-install the original OS and then had to upgrade again to snow loepard.
I installed the USB broadband again (big mistake), thinking that i may have been something else that caused the problem but the same problem occurred.
My question is:
Has anyone had any issues like this with T-mobile mobile broadband with their mac book?
Kind Regards
Jag

I received my O2 Mobile Broadband stick (Huawei E160) yesterday and I was unable to run the Connection Manager. I went to my local O2 shop with my MacBook Air where we tried other models of USB modems but to no avail. They then produced their own Mac Book and all devices installed without any errors. They checked the OS version and they were on 10.4.xx. Armed with this information I went to the Apple store where they checked that there was no problem with my MacBook Air and tried to install the device but they had the same issues. They then tried to install the device onto another MacBook Air and a MacBook Pro and it failed. The conclusion from the Apple staff is that you cannot install USB Broadband Modems if you are using the Snow Leopard OS.

EHP1 installation problem "No matching SAINT package for 'PI_BASIS' found"

Hi everybody,
i want update an Netweaver 2007 (SP14), BI, Dual Stack system to EHP1 (SP 5).
I use this manual during this installation:
(Update to NetWeaver EhP1)
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/808c3535-e378-2c10-83b4-cff07abef8e3&overridelayout=true
I've get all necessary support packages and the xml-file, put it into EPS-INBOX (Page 18 and Page 21) but i get the message "No matching SAINT package for 'PI_BASIS' found".
I know this was an issue, if you have SPAM 0036 (Note 1387523), but i've updated allready to 0037.
Have somone an idea?
Thanks a lot.

Hi,
please compare the SCA files for PI_BASIS are located in EPS/in
-rw-rr   1 c2badm   sapsys    192917 Nov 9 18:05 K-70101INPIBASIS.SAR
-rw-rr   1 c2badm   sapsys    353557 Nov 9 18:05 K-70102INPIBASIS.SAR
-rw-rr   1 c2badm   sapsys    508062 Nov 9 18:05 K-70103INPIBASIS.SAR
-rw-rr   1 c2badm   sapsys    393073 Nov 9 18:05 K-70104INPIBASIS.SAR
-rw-rr   1 c2badm   sapsys   1222228 Nov 9 18:05 K-70105INPIBASIS.SAR
-rw-rr   1 c2badm   sapsys   54524280 Nov 9 18:07 K-701DHINPIBASIS.SAR
with the entries in your .xml file like this:
<caption>PI_BASIS 7.01</caption>
    <ppms-number>01200615320200010570</ppms-number>
    <runtime-type>ABAP</runtime-type>
    <name>PI_BASIS</name>
    <version>701</version>
    <vendor>sap.com</vendor>
    <support-package>
     <caption>PI_BASIS Support Package 01 for 7.01</caption>
     <name>SAPK-70101INPIBASIS</name>
     <vendor>sap.com</vendor>
     <ppms-number>01200615321100046953</ppms-number>
     <sp-level>000001</sp-level>
     <patch-level>0</patch-level>
     <archives>
      <archive-name>K-70101INPIBASIS.SAR</archive-name>
     </archives>
    </support-package>
    <support-package>
     <caption>PI_BASIS Support Package 02 for 7.01</caption>
     <name>SAPK-70102INPIBASIS</name>
     <vendor>sap.com</vendor>
     <ppms-number>01200314691100043507</ppms-number>
     <sp-level>000002</sp-level>
     <patch-level>0</patch-level>
     <archives>
      <archive-name>K-70102INPIBASIS.SAR</archive-name>
     </archives>
    </support-package>
and so on ...until SAPK-70105INPIBASIS
finally the AddOn Package:
<support-package>
     <caption>PI_BASIS 701 Upgrade</caption>
     <name>SAPK-701DHINPIBASIS</name>
     <vendor>sap.com</vendor>
     <ppms-number>01200314691100040643</ppms-number>
     <sp-level>0000</sp-level>
     <patch-level>0</patch-level>
     <archives>
      <archive-name>K-701DHINPIBASIS.SAR</archive-name>
     </archives>
    </support-package>
   </software-component>
Gerd

8i INST. PROBLEM (libactionUnix151.so size=0)

Hi,
I have tryed to install booth 8i SE and EE on my linux box and
get's the same error.
When the "Install dialog" progress-bar reatches about 31%
i get a java.lang.UnsatisfiedLinkError
(/tmp/OraInstall/libactionUnix151.so)
and the installation fails.
The file in /tmp/OraInstall/libactionUnix151.so has zero size
and my question is WHY!! Dose anyone have a clue on this!!
JRE is: 1.1.6 v5 glibc
WM is: KDE
OS dist: Debian/GNU Linux (potato) glibc2.1
Regards
Peter
null

Hi,
I have fixed the problem.
It was my /tmp that was out of space!!
(rederected it to /var/tmp)
Regards
Peter
Peter P (guest) wrote:
: Hi,
: I have tryed to install booth 8i SE and EE on my linux box and
: get's the same error.
: When the "Install dialog" progress-bar reatches about 31%
: i get a java.lang.UnsatisfiedLinkError
: (/tmp/OraInstall/libactionUnix151.so)
: and the installation fails.
: The file in /tmp/OraInstall/libactionUnix151.so has zero size
: and my question is WHY!! Dose anyone have a clue on this!!
: JRE is: 1.1.6 v5 glibc
: WM is: KDE
: OS dist: Debian/GNU Linux (potato) glibc2.1
: Regards
: Peter
null

Problem w/ Measurement automation explorer or Inst I/O Asst

Hello,
I am new to Labview, and am working my way through the tutorial. I have loaded 3 discs for Measurement Automation Explorer such that i may complete Ch.4 of Getting started w/ Labview, using a DAQ device. The portion where i place an Instrument I/O Assistant on the block diagram is holding me up. When i double click the sub VI, it pops up an error message telling me that "Measurement automation explorer or Instrument I/O Assistant is not installed correctly". I have loaded these disk's twice so far, same issues. No one around the office can figure it out, either. I am using Labview disks dated Feb. 2007, NI MAX 4.2, compliance package 3.0, NI DAQmx 8.5. Any help is greatly appreciated. Thank you.
Solved!
Go to Solution.

Hey,
Try the solution that is presented in this KnowledgeBase article.
Regards,
Sara Lewandroski
Applications Engineer | National Instruments
http://www.ni.com/support

Problems with re-inst

We own the Zen xtra 30 G - I just erased my hard dri've for a clean-up, and when trying to re-install the drivers, etc. using the disk, All that shows is a tiny square with a selector arrow in the middle of the screen, no use and frozen. Anyone know what to do?

Rather than using the CD download the latest software using the guide here.

Problem in inst. ST-PI & Upgd. of PI_BASIS

Similar Messages

Maybe you are looking for