Problem in installaing 10g(10.2.0) dev suit on linux 4EL

hi all
i have completed the RPM installation and required configuration on linux for installing oracle 10g(1.2.0) dev suit on linux but when i run setup it returns error
can anybody help me , I shall be higjly thnkfull bc it is very imp for me.
[root@oracleserver pkg2]# Disk1/runInstaller
The OUI Screen may take around 5 to 30 seconds to come up depending upon system performance. Please Wait .......
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, redhat-4, SuSE-8, SuSE-9 or UnitedLinux-1.0
Passed
All installer requirements met.
Checking Temp space: must be greater than 400 MB. Actual 14942 MB Passed
Checking swap space: must be greater than 1536 MB. Actual 2000MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Checking if CPU speed is above 450 MHz. Actual 2794 MHz Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-24_12-05-25PM. Please wait ...
Error in writing to directory /tmp/OraInstall2008-04-24_12-05-25PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
then i checked spaces
[root@oracleserver pkg2]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda8 22G 5.5G 15G 28% /
none 502M 0 502M 0% /dev/shm
/dev/sda5 15G 2.1G 13G 14% /ddrive
/dev/sda6 20G 8.0G 12G 41% /edrive
/dev/sda7 5.9G 559M 5.4G 10% /fdrive
[root@oracleserver pkg2]# df -h /tmp
Filesystem Size Used Avail Use% Mounted on
/dev/sda8 22G 5.5G 15G 28% /
[root@oracleserver tmp]# ll
drwx------ 2 oracle oinstall 4096 Apr 24 10:44 gconfd-oracle
drwx------ 3 root root 4096 Apr 24 11:30 gconfd-root
drwx------ 2 root root 4096 Apr 24 11:30 keyring-LYfCYY
srwxr-xr-x 1 oracle oinstall 0 Apr 24 10:28 mapping-oracle
srwxr-xr-x 1 root root 0 Apr 24 11:31 mapping-root
drwxrwx--- 3 oracle oinstall 4096 Apr 24 10:36 OraInstall2008-04-24_10-36-30AM
drwxrwx--- 3 oracle oinstall 4096 Apr 24 10:37 OraInstall2008-04-24_10-37-27AM
drwxrwx--- 3 root root 4096 Apr 24 11:31 OraInstall2008-04-24_12-05-25PM.
drwx------ 2 root root 4096 Apr 24 11:32 orbit-root
drwx------ 2 root root 4096 Apr 24 11:30 ssh-ONJshz4863
-rw------- 1 oracle oinstall 0 Apr 22 11:40 t2lGX3GiqC
-rw------- 1 root root 917 Apr 24 11:31 xses-root.GtGWyn
regards
farnaw

Hi werner
thnks aging for ur cooperation
I EXECUTED THE COMMAND HERE IS THE OUTPUT
[oracle@oracleserver pkg2]$ Disk1/runInstaller -debug
The OUI Screen may take around 5 to 30 seconds to come up depending upon system performance. Please Wait .......
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, redhat-4, SuSE-8, SuSE-9 or UnitedLinux-1.0
Passed
All installer requirements met.
Checking Temp space: must be greater than 400 MB. Actual 14940 MB Passed
Checking swap space: must be greater than 1536 MB. Actual 2000MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Checking if CPU speed is above 450 MHz. Actual 2793 MHz Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-24_02-06-02PM.
Please wait ...unzip: cannot find ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar, ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar.zip or ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar.ZIP.
No zipfiles found.
Error in writing to directory /tmp/OraInstall2008-04-24_02-06-02PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
pzl help if any
Regard
Farnaw

Similar Messages

  • Installing oracle dev suite on linux 5.3

    Hi team
    can some1 help on how to install oracle dev suite on linux i'm gettting an error on
    could not ecxecute auto check for display color using command
    check if the display variable is set

    You need to set the Xpath variable in your putty seesion...i.e X11 forwarding should be enabled.
    DISPLAY
    Set to the current computer.
    Example (C shell):
    % setenv DISPLAY
    machine1.acme.com:0.0
    Example (Bourne, Bash or Korn shell):
    $ DISPLAY=machine1.acme.com:0.0;
    export DISPLAY

  • How to install 10 dev suit on linux

    Plz help me how can i install forms dev suit 10g on linux 4 El

    I might be able to answer if you have a specific question, given I have done this on RH3 (which is my development environment). Have been using on both 6i c/s and 10g iDS on Linux for a while.

  • Instal Oracle9i and Dev Suite on Linux Version?

    I'm preparing to install Oracle 9i with the development suite for educational purposes on Linux. Didn't find System Requirements.
    Will Red Hat Linux 7.3 Professional work with my oracle configuration?
    I hope Linux 7.2 for Itanium is not a requirement.
    Thanks in advance.

    Hi werner
    thnks aging for ur cooperation
    I EXECUTED THE COMMAND HERE IS THE OUTPUT
    [oracle@oracleserver pkg2]$ Disk1/runInstaller -debug
    The OUI Screen may take around 5 to 30 seconds to come up depending upon system performance. Please Wait .......
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-2.1, redhat-3, redhat-4, SuSE-8, SuSE-9 or UnitedLinux-1.0
    Passed
    All installer requirements met.
    Checking Temp space: must be greater than 400 MB. Actual 14940 MB Passed
    Checking swap space: must be greater than 1536 MB. Actual 2000MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
    Checking if CPU speed is above 450 MHz. Actual 2793 MHz Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-24_02-06-02PM.
    Please wait ...unzip: cannot find ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar, ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar.zip or ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar.ZIP.
    No zipfiles found.
    Error in writing to directory /tmp/OraInstall2008-04-24_02-06-02PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    pzl help if any
    Regard
    Farnaw

  • Problem in installing oracle 10g dev suit

    Hi all
    my name is farnaw, i have successfully installed oracle 102 R2 on linux enterprise 4 seccuessfully, know i want to instal oracle 10g developer suit latest version (10.1.2.0.2)
    acan any body help me how can i install dev suit, i need any link or steps to install this
    Reply will be highly appreciated
    With regards
    Thnks in advance
    farnaw

    You can find all the Oracle documentation at http://docs.oracle.com
    From there you can browse to the Developer Suite documentation, including the installation guide, at http://download.oracle.com/docs/cd/B25016_07//doc/dl/core.htm

  • Re-installation of a damaged/partial install of Oracle Dev Suite 10g (9.0.4

    Hi
    First of apologies if this is the incorrect location to post - I couldn't find a dedicated forum!!
    My problem is this......
    I have followed Oracle's guidelines and created a silent installation of the full Dev Suite 10g (9.0.4) and have used this many times successfully to install to fully patched Windows XP Pro workstations.
    Periodically the installation fails and only partially completes....no problem I naively thought - reinstall.
    Initially I tried re-installing over the top of the partial install - but this always fails with the error "You have specified a non-empty directory to install this product...etc"
    Oracle's recommended method is to uninstall and then reinstall - except the installer doesn't think anything is installed.
    The obvious thing was then to delete all folders and files pertaining to Dev Suite....this also failed with the same message!!
    I extended my deletion to temp folders, windows\prefetch and the registry......still fails!!
    Frustratingly the java installer doesn't have the force reinstall switch that the windows installer has....gggrrrr...
    So I had the mad idea of watching a manual install......this generated the non-empty folder error......so I deleted the folders and hey bisto!! Then I started getting these errors "The value of the environment variable path is more than 1023 characters. This value cannot be set."
    I even tried creating a response file against a damaged install.....failed with both of the above errors.
    Now I am stuck....if only Oracle used a decent windows installer!!
    I did think to check the installation on a virgin build workstation - success....
    I really hope someone can help me with this as it's driving me mad!!
    Please help
    Thanks in advance

    Many thanks Sainath.....
    This has certainly helped......the limitation appears to be in the java installer......it seems to check whether there is enough space in the Env Var PATH and errors if there is insufficient space.
    Of course the installer was written in pre SP2 days when the Env Vars were limited to 1023 characters......todat SP2 allows 2047 characters.
    My installation script now temporarily modifies the PATH variable, allows the installation and then returns the PATH variable to its original state and then adds the DevSuite paths.
    I can now smile again.
    Thanks
    Greg

  • Installation problem with oracle 10g release 1 in RHEL ES 4 platform

    Hi,
    I am facing such a problem. I want to install Oracle 10g release 1.
    I am using linux 86_64
    os is RHEL ES 4 UPGRADE 5 X_86_64
    When i put the command ./runInstaller It shows os is not supported.
    Is there any way to install this oracle version.
    Can u please suggest which version os is suitable for this.
    please suggest.
    Thanks & regards

    WHICH 10gR1 software do you use? Oracle provides different versions, you need 10.1.0.3 for Linux x86-64 from the OTN download page.
    By the way I would install 10gR2.
    Werner

  • Oracle Dev-suite 10g installation on WINDOWS server 2008 R2

    Hi Friends,
    Is it possible to install Oracle Dev-suite 10g on WINDOWS server 2008 R2.Any idea on this,can you please share.
    Best regards,
    Rafi.

    Hi John,
    Is it possible to do this by applying any patches or alternate option.
    Best regards,
    Rafi.

  • Problem in BEx analyzer output in BI dev and BI Quality

    Hi All
    I am facing a problem in BEx analyzer output in BI Dev and BI Quality server where the query is make on BI infoset.
    When i am executing the query in BI dev server then it is giving the output result but when i tried to executing the BI query in BI quality server the i got 'No available data found result'.
    I have also checked the same selection input result in infoprovider for infoset and output is getting for the same.
    Please suggest for regarding solution.
    thanks & regards,
    Gourav Sekhri

    Hi,
    check whether you have loaded data in to quality server if no, please load data for all the target involved in info set.  If data loaded check all the target 'request for reporting available 'or not.
    Also check whether data is showing in infoset or not.. if data availble there change your selection critiria accordingly.
    Thanks
    BVR
    Edited by: binu v. rajan on Aug 20, 2011 4:23 PM

  • Check "Problem: Oracle Database 10g Release 2 can only be installed in new

    Hi All
    Installing 10g software on AIX Box in /oracle/oraHome2,where oracle9i is already installed in /oracle/oraHome1 and oracle inventory is in /oracle/inventory
    In product specific prerequisite screen I am getting the
    check:Oracle Home incompatibilties is failed I am getting the error
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking for Oracle Home incompatibilities ....
    Actual Result: Oracle9i Database 9.2.0.1.0
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Oracle Database 10g Release 2 can only be installed in a new Oracle Home
    Recommendation: Choose a new Oracle Home for installing this product
    though I am installing it in different oracle homes why i am getting this error?
    Is it because 10g installation is picking the same oracle inventory /oracle/inventory
    do i need to make different oracle inventory for different oracle homes???????plz confirm..is thats the reason i am getting this error??????
    Thanks inadvance
    Gagan

    I figure out you are trying to install 10gR2 on top of an existing 9iR2 Oracle Home. This is corrected at the Path definition window. Most probably you just click on the <Next> and by default the 9iR2 Oracle Home was selected. You must define a new oracle home for the 10gR2 install.
    ~ Madrid

  • User provisioning problem from OIM 10g to Siebel CRM

    Hi Team,
    I am facing User provisioning problem from OIM 10g to Siebel CRM.Please find the log details.
    Running Get Attribute Mapping
    Running Siebel Create User
    <com.siebel.common.common.CSSException>
    <Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
    </com.siebel.common.common.CSSException>
            at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
            at com.siebel.om.conmgr.Connection.run(Connection.java:286)
            at java.lang.Thread.run(Thread.java:619)
    [CMGR FATAL] Error: <com.siebel.common.common.CSSException>
    <Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
    </com.siebel.common.common.CSSException> connection:1
    <com.siebel.common.common.CSSException>
    <Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
    </com.siebel.common.common.CSSException>
            at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
            at com.siebel.om.conmgr.Connection.run(Connection.java:286)
            at java.lang.Thread.run(Thread.java:619)
    [CMGR FATAL] Error: <com.siebel.common.common.CSSException>
    <Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
    </com.siebel.common.common.CSSException> connection:1ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
    ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.utils.SiebelConnection : createSiebelConnection() :  Siebel Connection Exception:Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
    ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
    ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
    ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.proxy.SiebelProxyEmployeeProvisionManager : createSiebelConnection() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
    ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
    ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
    ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.provision.SiebelUtilEmployeeProvisionManager : createEmployee() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
    ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
    Regards,
    Ravi.

    Hi
    I facing the same error message as yours, using OIM 11g R2
    Are you able solve it ?
    Please share
    Many Thanks !!!

  • Problem in oracle 10g release 2

    I faced strange problem while selecting data from join of tables (in oracle 10g). While selecting, when the order of fields in "group by" clause is changed, the resulting summary of values is changed too. For eg,
    query1 = SELECT F1, F2, F3, SUM(F4)
    FROM TBL1
    GROUP BY F1, F2, F3, F4
    query2 = SELECT F1, F2, F3, SUM(F4)
    FROM TBL1
    GROUP BY F2, F4, F1, F3
    The results SUM(F4) given by query1 and query 2 do not match. While testing these querries in differnt environments, we found such problem in ORACLE 10g RELEASE 2 only and not in ORACLE 10g RELEASE 1. I need to execute this query in oracle 10g. Can anybody help me finding the exact problem?

    The results SUM(F4) given by query1 and query 2 do not matchSince the group by clause is not same, the result of sum can be different.
    Can you provide us some dataset ?
    Nicolas.

  • Three tier architecture using oracle dev suite 10g & oracle database 9i

    hi ,
    I am trying to build a software which will manage the database of a hospital through usual form design .
    The tools I am using for these are
    (1) oracle server database 9i (2) oracle developer suite 10g (3) windows xp professional service pack 2 .
    I have designed the form modules in developer suite , created the tables in the database , connected those tables to the form modules using dml statements, now data can be inserted , updates and deleted through the form design . I have also deployed the forms using "run forms through web" and thereby other computers connected to the main computer through lan can also access the software using the web port address and the name of form to be used , these computers are not having oracle developer suite or oracle database installed , but they can access the software through the browser .
    In this scenario my question is that , is this a three tier architecture as oracle database is the first tier , oracle developer suite is the middle tier where I am puting all the bussiness logics and oc4j instance is used to connect the database and the dev suite , and for user interaction we have the browser as the third tier ?
    or this is a two tier architecture ? if this is a two tier architecture please let me know how can I implement a three tier architecture using oracle developer suite 10g and oracle server database 9i .
    Thanks a lot for showing ur interest to read this

    You need Oracle Application Server to deploy the forms when you go live.
    What you are currently using OC4J which came in the developer suite. It is used only for development purpose and can not have capacity to handle higher load.
    3 tier arch
    1. Thin Client :-> Browser
    2 Middle tier -> Oracle Appln Server /OC4j(in ur case)
    3 Database Tier -> Oracle Database
    Rajesh

  • Problem in Startup 10g DB

    Dear all
    i m facing a little problem in startup 10g DB i m using 10g DB on Windows 2000 Professional operating system
    when i start data base from enterprize manager i log on SYS user then i select Startup then i feed some parameter like
    1) Host Credentials
    Specify the OS user name and password to login to target database machine
    i feed there operating system user name & passowrd
    then
    2)Specify the credentials for the target database.
    To use OS authentication, leave the user name and password fields blank.*
    i enter sys user and his password
    Database yasir
    Connect As SYSOPER
    when i pressed OK button then ii face that error
    Error Message
    RemoteOperationException: ERROR: Wrong password for user
    but my both password operatin system & sys password are correct
    any one have any idea what is problem & how can i slove my problem
    Thanks
    Rizwan

    From control panel go to
    1. Administrative tool---local security policy---local security settings
    2.From the local security settings windows: local policies---user rights assignment
    3.double click "log on as a batch job, add the administrative user you want to assign on the OEM.
    Hope this works for you.

  • How to download Oracle 10g Dev.Suite Patch

    Hi,
    I need to download How to download: Oracle 10g Dev.Suite Patch for WindowsXP SP3 32-bit for Developer Suite 10g.
    Direct link to the download would be appreciated.
    With regards,
    MOHAMMED AJAZ.

    Hi Sarah
    I don't have access to metalink. i was trying to register but it's asking system identifier, which is i don't have. It's looks like for commercial use.
    1. Can i register metalink for personal use? (this software i am using for practice.
    thanks.
    WITH REGARDS,
    MOHAMMED AJAZ.

Maybe you are looking for