Problem in Installing/ Activating 0SD_C03 Infocube from Business Content

Hello Friends,
I am installing an InfoCube 0SD_C03 from Business Content in our BW Development environmant. I first installed "Only the Necessary Components". This took 3 hrs. AFterwards I picked "Before Option" and it kept running for 14 hrs, without completeing. In the last I stopped it to minimize the performance impact to anybody.
My question is, do you also face any such problem of installation running for hours and hours? How have you handled its resolution.
Finally, I broken my task into various component and I am installing component by component (e.g. Transfer Rule, Update Riles etc. etc.). But while doing so, human errors are possible and I may miss something. Also we would not like the same activation runs for hours in Production.. So there
Could you share some of your rich experience and possible resolution. Thanks for your help.
Gabeesh Mishra
[email protected]

Friends,
Necessary components took 2-3 hrs. I am running "before option" this weekend and will find out Monday. Running on weekend will not impact anybody.
I am communicating with Basis Team and they are aware of this problem.
In my previous organization, even Before Option will complete in 2 hrs (maximum). I guess there are multiple factors for jobs running so slow. Of course, I am following all rules of the Game!!
Thanks,

Similar Messages

Install Info Object 0BSTAT from business content

Hi Guys,
I am trying to install info object 0BSTAT from business content , i have selected the options
grouing "only necessary obects" "start automaticall" "Hierarchy" ad dragged info obect from left side into collected objects and selected the install and trasport option form Install, assigned the trasnport also, it didn't give any errpor message but info object is not getting activated.
An body had the expericence with this issue, please share you ideas how to fix the issue.
Thanks
Best regards
Shekar Gunda

Thanks for your reply Matrin.
I looked at the log
Log is:
Installation of: Onfo Object (IOBJ)
You onl have authroization to display info object 0BSTAT
Transfer/Merge of the content version (Object Type Infoobject)
Activation of obects with type Info Obect
Saving Objects with type Infoobject
Transferring the 1 objects from type IOBJ took 0.4 seconds
Post-Processing of objects after activation
The post-processing lasts 0.0 seconds
Object IOBJ 0BSTAT was written to order/task EWD*******
You onl have authroization to display info object 0BSTAT
I looked at the SU53 also there is one error message related to info object BSTAT
Currently aunthorization Field ACTVT Activit is "23"
Does this mean i don't have autorization to install of info obects, do wee need any special activity is required in the for installing info object
Please suggest me how to proceed.
Thanks
Best regards
SG

How to install sources for infobject from business content

Hi,
I have 16 infobjects for which we need to move to prod and there are no connections to it but the infobjects are active and some are i modified state, like no datasources, infosources, transfer rules etc., Can you please tell me the approach to install all the necessary for them. I mean how to find and how to install, please help if any documentation is available.
Thanks

Hi daniel,
Inorder to install the business object, you will be require to follow the following steps :
i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
ii)Select your Info Object say 0MATL_GROUP (material Group).Click on Transfer selections.
iii)Now when the info object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc as you want.
v)Now you want to see if there can be some predictive error then go Install --> Simulate Installation.
vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the Material Group install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your A-version Material Group will be overwritten by the D-version Material group provided by SAP.
vii)For ur more understanding lets take the example say you have added two customer specific attribute to Material Group now twist is SAP has also just release the enhance material Group with two additional attribute. Now you are very curious of getting this two attribute in your already active Material Group. For this you will be required to install the material Group from Business content. If you forget to check the Match option then your customer specific attribute will be lost. So to retain them we have to check the MATCH(X)
Hope it will help.
Thanks,
Deepak Machal

Error while activating 0FIAR_O03 DSO from Business content

Hi,
While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
Thanks,
RAJ

Hi raj,
The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
do the following... try to activate the DSO once again ... you will get the message again
now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
Regards
KP

Unable to Activate Infocube from Business Content BI 7.0

Hi,
While activating an infocube from the business content I am getting the error "OBJECTS_OBJREF_NOT_ASSIGNED"."The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be
terminated because it has come across a statement that unfortunately cannot be executed."
This is applicable to all the cubes .I am working in BI 7.0.Could you please let me know incase you have come across a similar error.
Thanks in advance.
Best Regards,
Dushaynt.

Thanks a lot,
As i have tried that same before i check your reply and i got solved problem as you have mentioned here.
Now i can active any cubes,
thanks.
I still see some error related to OPAK jobs,related to infopackage while activating the cube.Have u ever encountered the same ?
Best Regards,
dushyant.

How to install cubes and queries from Business content in BI 7

Hi all,
Could you please help regarding how to install Info Cubes and Querries from Business content in BI 7.0
And pl send some OSS notes on BW Statistics in BI 7.0
Thanks in advance

And also you can go thru the following link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
Regards,
Gattu

Activating 0PUR_O01 DSO from Business Content

Hi,
Iam looking for more info around How to Activate the BC DSO 0PUR_O01.
Iam planning on Activating 0PUR_O01(Purchaing Line Items) DSO from the Business Content.
I read in help.sap that it sources data from 4 different Info Sources
2LIS_02_ITM: Purchase Order Items
2LIS_02_SGR: Allocation - Schedule Line with Goods Receipt
2LIS_02_CGR: Allocation - Confirmation with Goods Receipt
2LIS_02_SCN: Allocation Schedule Line with Confirmation
My questions are,
1.While activating the 2LIS_02_ITM Info Source,some of the objects like 0CM_CDT1 are coming up with a warning that the IO 0CM_HIEID is not added as attribute or Compounded(whil in reality it is present as compounded object)
2.Do I need to use the 3.5 Data source/Info Source or can I migrate to 7.0?
If I migrate to 7.0, then How do I convert the update rules & Routines which are collected during the collection of objects for the "Data Flow Before option)"
3.If I need only data required coming from 2LIS_02_ITM data source, can I simply activate only this Data source& DSO and keep loading the subset of data from this Data source?
4.Pls send me any documentation about this DSO/Data sources and How to use them/Activate them etc...
janjir ATTHERATE OF yahoo.com
Thanks
Jagadish

hi,
1.While activating the 2LIS_02_ITM Info Source,some of the objects like 0CM_CDT1 are coming up with a warning that the IO 0CM_HIEID is not added as attribute or Compounded(whil in reality it is present as compounded object)
if the object is found compounded and only warning messege, then u can ignore it
2.Do I need to use the 3.5 Data source/Info Source or can I migrate to 7.0?
If I migrate to 7.0, then How do I convert the update rules & Routines which are collected during the collection of objects for the "Data Flow Before option)"
that depends on ur requirement, at any point of time u can migrate to 7 data flow. but you have to create ur own transformations, u cannot migrate the update rule/transfer rules
3.If I need only data required coming from 2LIS_02_ITM data source, can I simply activate only this Data source& DSO and keep loading the subset of data from this Data source?
yes u can
4.Pls send me any documentation about this DSO/Data sources and How to use them/Activate them etc...
BI Content
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
All SAP related info
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
Ramesh

Error while activating process chains from Business Content

Hi All,
I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
1.Delta Upload : MTTR / MTBR (0PM_DELTA_P02)
2.Initialisation : MTTR / MTBR (0PM_INIT_P01 )
And they are failing with the error
"Object 0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
Message no. RS_EXCEPTION280"
"Message Text
Object 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
Technical Data
Message type__________ E (Error)
Message class_________ RS_EXCEPTION (Exception Messages)
Message number________ 280
Message variable 1____
Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
Message variable 3____
Message variable 4____ "
In the collected objects, these two infopacks are not present also.
Can you please let me know how to proceed?
Many Thanks in Advance,
Vineeth

Hi
Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
Check these links.
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
Chandu.
Edited by: Chandu on Jan 22, 2009 2:24 PM

How to install new cube/ods from business content

Hi all,
We have 0AFSD_DS1 for sales. But dont have anything for Delivery which start with 0AF ...
How to add ODS/Cube to BW using BI ???
Please help ...
Regards,
Viren.

Hi ,
I want to install new data target for the delivery data source 2LIS_12_VCITM.
Which should be afs compatibble... all the ods and cubes objects start with 0AF...
So i think we should use ODS object which start with 0AF.. for delivery also...
How to find out which is correct data target for the data source 2LIS_12_VCITM??
Regards,
Viren.

Problem while installing a query from Business Content

Hi all of you,
I am trying to install this particular query Inventory Turnover from the cube 0IC_C03 (Material/Stock Movements) from Business Content. Now in the third pane in Business Content under Active version available column across the name of this cube there is a calendar symbol.
a.     So does it mean that the cube 0IC_C03 (Material/Stock Movements) is installed along with all the objects that are dependent on the cube and all those objects on which the cube is dependent. (NOTE: I had selected the grouping option as In data flow afterwars)
b.     When I collapse Query Element I find that some of the queries are not installed. So I expanded Inventory Turnover query, right clicked on it and selected Install All Below.
c.     I am getting this error, Abort system error in program SAPLRRI2 and form LI_SETZEN-01- when I execute the query Inventory Turnover. However in Business Content when I installed the report Inventory Turnover under the cube Material Stock/Movement I didnt get any error anywhere. Everything was activated successfully without any errors.
Please tell me how do I install this Inventory Turnover from business content and how do I execute this report from BEx.
Thank you.
TR.

Hi Arun,
Thank you for that quick reply. I want to activate only the query and not the cube. I did as you advise me but still I am getting the same error when I run the Inventory turnover report from BEx.
I am able to run other reports from the cube IC_C03. But not this report Inventory turnover. I have also checked the cube and there is data in the cube.
Kindly adivse what to do.
Thank you.
TR.

Error in installing process chain from Business Content.

Dear Experts,
I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
<b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
Thanks in advance.
Regards,
NJ

ithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
try this
Aravindan pagadala
satyam

Update rules not getting installed from business content.

Hello,
One more major issue I am seeing is that my update rules for some cubes (0PUR_C01)are not getting installed at all from business content and the errors i am getting are like datasource 0vendor_text not maintained and then there is long list of such red lights. when actually I can see most of the datasources active in the datasource tab on BW side.
So i dont know how to get these update rules working.
Please advice,
Thanks

Hi Mukund,
please see also the answer that I provided to your thread
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=121274&tstart=0">Strategy toward new and 3.x datasource / infosource</a>
In addtion, you might want to check
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/497e4ec079584ca36b8edba0ea9495/content.htm">help.sap.com DataWarehouse</a>
and the online documentation for more general information about data modeling / acquisition.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Need to install from Business content

HI,
We have already active infoobject in DEV,but due to some bugs it is not getting to make any changes.
IF we re activate it from business content will there be any impact on the existing one.
What are the steps to reactive from Business content.
Thanks,
Erick.

Hi Erick,
You can install it.
Select the check boxes.
Install: To install the object and to overwrite the installed one.
Match/Copy: It will not overwrite the existing one. It will match with the Properties of the existing Object.
Regards,
Ramkumar.

Install from business content

Hello Experts,
Am trying to install a standard cube 0PE_C01 from business content. I got a error which says Datasource '0dbDUNS_IMPORT_ATTR' not maintained. How do i resolve this? Thnx in advance.

hi,
Check the list of other objects which are also getting installed with the cube.You can also check the default settings before you install.Probabaly you are loading something extra which is not desired as a part of this Infocube.
Refer to this link for more setting details.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
hope it helps,
regards,
Parth.

Error on installing infoobject catalog from business content

while performing Install from Administrator Workbench:Business Content I am getting error.
I am trying to install Infoobject catalog 0MMIC_CHA01 and 0MMIC_KYF01 from business content
The error messages appearing are as follows:
Installation (simulation mode) of: InfoObject (IOBJ)
Checking Objects with Type InfoObject
Checking InfoObject 0BPARTNER
Char. 0LEGALFORM is exclusively an attribute (cannot be a navigation attribute)
Checking InfoObject 0CM_CDT1
Char. 0CM_HIEID may not appear in compounding and attributes simultaneously
Characteristic 0CM_CDT1 is used as Navigation Attribute of 0RT_SEAROLL, but characteristic
IInstallation (simulation mode) of: ODS Object (ODSO)
Installation (simulation mode) of: Update Rules (UPDR)

Hi
It seems although's are warnings and not errors. Instead of using Simulation just install the content.
check out the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89?QuickLink=index&overridelayout=true
Regards,
Venkatesh

Problem in Installing/ Activating 0SD_C03 Infocube from Business Content

Similar Messages

Maybe you are looking for