Problem in installing Developer-6 - defineing no of users

While installing d2k v6 - there is new method for setting no of users/clients. How to set that, we could not do that.

Roughly speaking vista reports as windows NT '6.0' vista. windows 2003 is 5.2 , XP is 5.1 and windows 2000 is 5.0.
This measn the version of oracle developer you downloaded was not originally certifiied to be installed on vista.

Similar Messages

Problem in installing developer on vista

when i install developer 10g on my vista it checks my system requirement it tells me this:
system must be: 5.0 , 5.1 , 5.2. actual 6.0
failed <<<<
and before it the database enterprise installed perfectly
i hope someone explain this to me

Roughly speaking vista reports as windows NT '6.0' vista. windows 2003 is 5.2 , XP is 5.1 and windows 2000 is 5.0.
This measn the version of oracle developer you downloaded was not originally certifiied to be installed on vista.

Problem to install Developer Suite...

Hi,
I bought six months ago the Oracle product to put it in my PC. Today I tried to load the Oracle9i Developer Suite (I would like to see the Procedure Builder to know it for the 1Z0-147 exam....) but I received a message because my version of Developer Suite (9.0.2.0.1) is to old than my version of Oracle (9.2.0.1.0).
Do you know where I can dowload the good version (And wich one is good) or need I to contact Oracle to receive a new CD (I tried to send mail tree times, but no response....)?
Thank you for your response.
Eric

The Database version should not matter just make sure that you install iDS into it's own Oracle Home directory - not in to the Database Oracle home.
You can get the latest patches for iDS from metalink.oracle.com if you have a support contract.

Installing Developer 6i on Linux

Hi! I'm having problems to install Developer 6i on Linux. I'm using windowmaker.
I follow the instructions from installation guide, but I don't know how do I do to execute the installation program.
I windows' installations exist commonly a SETUP.exe or ORAINST.exe program. But in Linux I don't found these programs.

I have tried to start installer developer 6i on linux with orainst/orainst. But it didn't work. the message is "bad interpreter: No such file or directory".
What should i do to start the installer? based on manual installation, it should be easy. But why it failed?

Problem Installing Developer Suite on WIndows Vista

Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

Which developer suite are you using???

Problems installing Development Suite Patch 10.1.2.3.0 on Windows 7 (32-bit)

Hi all,
I'm trying to install Oracle Development Suite 10.1.2.3.0 on Windows 7 (Service Pack 1 with fairly current Windows Updates) according to Metalink Document 1292919.1.
Everything work just find until I try to install the 10.1.2.3.0 Patchset (Patch Number 5983622) as outlined in Step 5 of the aforementioned Document.
During the step labelled "Copying files for 'Oracle Universal Installer 10.1.0.6.0" I get the following error message twice:
"javaw.exe Entry Point Not Found"
"The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL".
I acknowledged both of these messages and rest of the installation process runs fine.
I'm not not sure about what to make of these messages, will my installation work correctly or will I have to cope with further issues related to this?
My search on Metalink did not turn up any results related to the Development Suite. I already checked if there were multiple versions of psapi.dll were present on the system as mentionned in Documents regarding this problem while installing Oracle client 10.1.0.5.0 but there is only one.
Any help is apreciated!
Chris

Hi Chris,
Answer to the question is provided on threads:
Install errors - Entry point not located in PSAPI.dll; Package load failure
PSAPI.DLL installation error
Hope this answers your question
Thanks &
Best Regards,

Problem in installing Netweaver developer workstation

Hi,
I have some problem in installing the Net Weaver Developer workstation on my pc. I have installed all the prerequisites for the same and have administrator privileges on the system as well. The log contents are as given below. Please could anyone figure out what exactly is the problem?

starting gui server process:
sapinstport: 21200
guiport : 21212
command : "C:\Program Files\Java\j2re1.4.2_09\bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.2956.1179124207\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.2956.1179124207\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200
starting gui process:
port : 21212
command: "C:\Program Files\Java\j2re1.4.2_09\bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.2956.1179124207\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.2956.1179124207\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTGui service=com.sap.sdt.engine.ext.sapinst.SAPinstServiceIF host=localhost port=21212
load resource pool C:\Documents and Settings\Administrator\Desktop\NW04sDW on IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host port 21200 to continue with the installation
INFO 2007-05-14 14:37:50
Execution of preprocess block of |NW_Workplace|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0 Step AddPrivileges returns TRUE.
ERROR 2007-05-14 14:37:50
FSL-06002 Error 123 (The filename, directory name, or volume label syntax is incorrect. ) in execution of a 'NetServerGetInfo' function, line (202), with parameter (., 101).
ERROR 2007-05-14 14:37:50
MOS-01224 Unable to add privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'sysadmin' on host '.'.
ERROR 2007-05-14 14:37:50
MOS-01224 Unable to add privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'sysadmin' on host '.'.
ERROR 2007-05-14 14:37:50
FCO-00011 The step AddPrivileges with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0|AddPrivileges was executed with status ERROR .

Hi Anushree,
Let me make it clear. sorry for confusion
I could not understand where u said "Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root
directory of your Java installation. As an alternative you may start the GUI Server on another host." Could you please elaborate on it?
Where exactly should the JDK be installed?
Answer: Installation error of NW04s
Does it make any difference to install a different version of JDK when the installation guide clearly recommmends the usage of one version?
Absolutely yes,,but It somehow worked for 08 for me. go ahead with 09 as per recommendation.
Where can I find SAPINST_JRE_HOME? The installation no where asks for any input where I can mention the directory of Java installation.
You can put environmental variable called SAPINST_JRE_HOME=<Your JDK Installation path> where ever and make sure it's in the path, veryifying with PATH
on cmd-prompt. and follow the above URL as it clearly says the same problem
Also disable any ant-virus if it's running
Hope that helps

I have a problem when installing the Developer Suite

Hello,
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
Please help me with this :(

Hi user;
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
Regard
Helios

Problem while installing SAP netweaver developer workplace

hi,
I hav a problem while installing SAP netweaver developer workplace .An error has occured while processing service ´developer workplace installation´.This error occured in phase 14 of 25 ie while unpacking SCS Client.error is as follows:-
[Cannot connect to host uklonki1 Connection refused: connect, -813.]
the database is online and the x-server is also started.hope anyone can help me in this problem.
with regards,
Jaisamma

Hi Michael,
I have tried that, but the result remains the same.
Manish

Problem:Installing Developer server 6

Hi,
I have installed NT4 with service pack6, Oracle Enterprise 8.0.5, OAS 4.0.7.
And i stop all oracle services.
Mem:128M, 330MHz processor.
The problem is:
When I installing developer server 6, it is automatically logout of the installion. So there are nothing to be installed.
Thanks in advance..

check if your oracle 805 and developer 6i is y2k. it seems that developer 6i will auto-log out if the db is not y2k. i've experienced this similar situation with 805 and i had to roll-back the OS date to go through with the installation. hope this helps!

Install Developer 6i on ORACLE 8.1.7 client

Saw that a lot of you have problems with Developer 6i and ORACLE
8.1.7 server.
I have installed 8.1.7 client only on my computer (this version
is mandatory, for corporate standard); when I try to install
Developer 6i, I get the error message:
The location specified 'D:\ORACLE\ora81' is already used as a
home for ORACLE 817 Production. It cannot be used as an ORACLE
home for 'nt'
I know that I could install Developer 6i in a different home, but
would have a second Oracle Client/Net installation on the
computer, unequal 8.1.7. This would be against our policies.
My question:
o Is ORACLE Client 8.1.7 compatible with Dev/6i ?
o If yes, how do I have to install the software?
o If not, Do I have to use a different developer version? Which
version?
By the way:
Got this Error on Windows/NT and Windows2000

you can not install Oracle8.1.7 and Forms6i in the same
oracle_home.
So, install it into a different ORACLE_HOME (directory) on the
same machine.

Problem with installing patch SP1b

Hello All,
I have a development server running on XP pro with live cycle 8.0.1. I 'm facing a problem while installing patch SP1b to that server. I have attached the log file.
My problem is
I copied a process' .lca file from a server running on windows server 2003 with patch installed and deployed on the development server. Now in my development XP box, workspace is opening but when i tried to open the process, before rendering the pdf form it is giving "An error occurred during the operation (endpoint id 401). (ALC-WKS-007-027)" error. I have even crosschecked the input xfaform variable also; every thing is perfect. The details are as below:
The Server from which i copied is: (windows server 2003)
License Type: Full Version: 8.0.1
Patch Version: SP1b
Expired Date: Not Applicable
Installed Components
Product
Version
Patch
License Type
LiveCycle Process Management ES
8.0.1
SP1b
Full
LiveCycle Forms ES
8.0.1
SP1b
Full
The server to which i deployed is: (xp pro)
License Type: Full Version: 8.0.1
Patch Version:
Expired Date: Not Applicable
Installed Components
Product
Version
Patch
License Type
LiveCycle Process Management ES
8.0.1
Full
LiveCycle Business Activity Monitoring ES
8.0.1
Full
LiveCycle Forms ES
8.0.1
Full
Will that patch version could be the problem? What could be the problem and what is the solution?
Thanks
Deepak

Anybody knows the answer?

Problem with Installing the Oracle8i PO into Windows ME

I think I have the same problem as some of you had. Recently, I bought the Oracle Book and it has 3 discs: 1 for Oracle Developer 6 for Win 95 or 98, 1 for Oracle 8i PO (release 8.1.5) for Win 95, also 1 for Win 98.
My computer had no problem when I installed the Or. Developer. However, my computer won't allow me to install the Oracle 8i PO Win 98 disc. Instead of that, I have no problem of installing the Oracle 8i PO Win 95 disc. After I installed the Win 95 disc with all correct configuration according to the instructions, I can not CONNECT to the database. So, is this mean the Windows ME is compatible with the Win 95 disc? Or my computer is "screw up"? Because I know Win Me is very much the same as Win 98. If I installed the Win 98 disc, it should be ok. Anyway, I installed the Win 95 disc successful, but can not CONNECT.
So if anyone can help me out, or need a specific error message, I will post up next time. For now, I think I already gave you guys a "head-ache"... sorry.... Thanks all! Wait for your helps guys!

What drivers are you attempting to install?
- Peter

Problem in Installing Forms 6i in Oracle 8

Hi there
I am a home user and at the moment studying for OCP Oracle Forms Developer Rel. 6/6i and I really need some good help.
I have some problem in the Installing the Orcale Forms 6i, I have already installed WinNT4 (Server) and Oracle 8.
SO far I have tried to Install Forms 6i four times but I failed. Due to this reason every time I had to also Uninstall the Oracle 8
from my system, because it started to give problems.
OK THIS IS THE PROBLEM :
When I installed Oracle 8, the user name was <system> and the password was <manager> in the SQL Plus. I used it for few times and worked fine. But when I installed the Oracle Developer 6i the SQL Plus didn't accepted the same user name and the password. I tried many commands that I could find in the Oracle documentations (On the CD) but so far nothing.
Need some command or any thing to over write the system so I can change the user name and password.
Plus when I use turn on my computer and run WINNT 4 (server) I get message that I have some problem in Oracle80.exe file and due to that my system hangs for couple of minutes.
I also want the sample tables, but I don't know the particular command for SQL *PL by which I can get the sample tables.
Please help me by suggesting what shall I do.
Regards
Mustafa
null

<BLOCKQUOTE>quote:<HR>Originally posted by martin vonk ([email protected]):
Hi...
Source: Oracle support.........:-)
Installation Procedure
Follow this procedure to install Developer 6.0 and Oracle 8i on the same physical machine in separate ORACLE_HOMEs on NT:
1) Install Developer 6.0 using the instructions on the Developer CD.
Specify an appropriate drive and the ORANT directory as the destination. For example:
D:\ORANT
Note: You must install Developer in the Oracle home named DEFAULT_HOME.
2) Install RDBMS 8.1.5 from the Oracle 8i CD. Specify the following information when prompted for the Oracle Home and Full path:
Oracle Home ora8i
Full Path d:\orant\ora8i
Choose Typical Install
Global Database Name ora8i.us.oracle.com (This is an example)
SID ORA8I (This is an example)
As the product installs, a summary is displayed that shows the products that are installed and the space requirements.
When the installation is complete, the following information is displayed and the installer exits:
Oracle Database Configuration Assistant Alert Database Creation Completed.
Database Information
Global Database Name ora8i.us.oracle.com
SID ORA8I
Sys password change_on_install
System passwd manager
3) A TNSNAMES entry needs to be created in the tnsnames.ora file for the new Oracle 8i installation. You can find the file in:
d:\orant\net80\admin\tnsnames.ora
A default entry will look like this:
alias.world
(DESCRIPTION
(ADDRESS_LIST
(ADDRESS
(PROTOCOL = TCP)
(Host = )
(Port = )
(CONNECT_DATA = (SID = )
For example, if you installed on a machine with a HOSTNAME of TEST, a SID named ORA8I, on TCP/IP with port 1521, and an alias of NEW, you would create the following entry:
NEW.world
(DESCRIPTION
(ADDRESS_LIST
(ADDRESS
(PROTOCOL = TCP)
(Host = TEST)
(Port = 1521)
(CONNECT_DATA = (SID = ORA8I)
4) If you manually created the entry, save and close the tnsnames.ora file.
You can now connect to the local database instance of 8i using the DBSTRING as NEW. For example, you can connect as scott/tiger@NEW.
HTH
Martin<HR></BLOCKQUOTE>
null

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

Problem in installing Developer-6 - defineing no of users

Similar Messages

Maybe you are looking for