Problem in installing Discoverer Admin. Edition

During the installation of the admin. edition, an error occured. It prompted that "unbound variable", then I clicked the "OK" button. It would totally stop installation and quited. Does anyone know what is the problem, is the problem of the download file of this website or any others.

Hi
The easiest way to get a fully working TNSNAMES in a version 4 environment is to use the Net 8 Configuration utility.
Here's a workflow:
1. From the Start button, select Start | Oracle for Windows NT | Oracle Net8 Easy Config
2. When it starts, check Add New Service and in the little box to the right type the name by which you want this connection to be known
3. Click the Next button
4. Select TCP/IP (Internet Protocol) and click the Next button
5. Enter the fully qualified domain name or IP address of the server that contains the database
6. In Port, enter the port number - it defaults to 1521
7. Click the Next button
8.In Database SID enter the name of the database, then click the Next button
9.Click the Test Service button
10. Provide a username and password for an account on the database, then click the Test button
11. If you see: Connecting.... The test did not succeed you got the username/password combination wrong or some other part of the setup
12. When you see: Connecting.... The connection test was successful click the Done button
13. Click the Next button
14. Click the Finish button
You should now have a valid TNSNAMES connection for use by Discoverer 4
Best wishes
Michael

Similar Messages

Problem while installing discoverer desktop edition

HI
I find few error messages while installing discoverer desktop edition..
When i give oracle home as
name:OracleHome92
Location: DiscovererDesk
it gives me a error
" oracle discoverer doesnot support multiple installations thus it cannot be installed on oracleHome92.It can only be installed on 'OraHome92'"
When i give oracle home as
name:OraHome92
It automatically takes my 9i oracle home path i.e E:\oracle\ora92 and gives me a error like
"The location specified 'E:\Oracle\ora92', is already used an oracle home for an
'Oracle 82 beta'.It cann't be used as an oracle home for nt."
I have oracle 9i and form6i,report 6i installed in my system.
Please suggest me ..
Regards,
Satya

Hi
The easiest way to get a fully working TNSNAMES in a version 4 environment is to use the Net 8 Configuration utility.
Here's a workflow:
1. From the Start button, select Start | Oracle for Windows NT | Oracle Net8 Easy Config
2. When it starts, check Add New Service and in the little box to the right type the name by which you want this connection to be known
3. Click the Next button
4. Select TCP/IP (Internet Protocol) and click the Next button
5. Enter the fully qualified domain name or IP address of the server that contains the database
6. In Port, enter the port number - it defaults to 1521
7. Click the Next button
8.In Database SID enter the name of the database, then click the Next button
9.Click the Test Service button
10. Provide a username and password for an account on the database, then click the Test button
11. If you see: Connecting.... The test did not succeed you got the username/password combination wrong or some other part of the setup
12. When you see: Connecting.... The connection test was successful click the Done button
13. Click the Next button
14. Click the Finish button
You should now have a valid TNSNAMES connection for use by Discoverer 4
Best wishes
Michael

Install discoverer admin and desktop

Hi All,
We have already installed discoverer 11.1.1.4 on linux. We have two url one for discoverer viewer and other for discoverer plus.
Now i need to generate a resport do i need to install discoverer admin and desktop.
I am new to discoverer Do i need to install discoverer admin and desktop separately or else we can use the same setup.
Please help.
My env details .
OS : OEL 5
Apps: EBS 12.1.3
db verion : 11.2.0.3
Discoverer version : 11.1.1.4
Thanks and Regards,

Hi,
You need to install Disco Admin to create and maintain an EUL. Discoverer Administrator and Desktop are part of the same installation and you should always install both. The software download is available from the Oracle Discoverer 11g Fusion Middleware (http://www.oracle.com/technetwork/developer-tools/discoverer/downloads/index.html). You install Oracle BI Discoverer Desktop and Discoverer Administrator 11.1.1.3.0 onto Microsoft Windows.
Rod West

Problem in installing 10g express edition on windows 8

I have installed oracle 10g express on windows 8.it was successfully installed.when i try to make a qurey it says data not found.Though table is successfully created.But when i try to fetch the data from table using "select * from table_name" its says data not found.i dont no what is the problem..if anyone has the solution please mail me at [email protected]

I have installed oracle 10g express on windows 8.
Said that XE 10g is not certified for Windows 8 (Oracle&reg; Database Express Edition), please post the exact commands you executed and error(s) you got.
Did you insert data in that table ? and did you select from the same session, or another one ? if another one, did you commit after inserting ?

Problem about Install 10g Express Edition on my Debian 3.1 system

Dear all,
I've recently downloaded the oracle-xe-universal deb file from oracle.com.
I installed the deb file on my system and it seems successful.
But after I configured oracle with "/etc/ini.d/oracle-xe configure"
I can't view the webpage on my firefox browser.
It replied connection refused.
And I tried sqlplus like this:
niu@shuang:~$ sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Mar 6 11:39:43 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
niu@shuang:~$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Mar 6 11:40:19 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect / as sysdba
ERROR:
ORA-01031: insufficient privileges
niu@shuang:~$ sqlplus system@shuang
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Mar 6 11:42:02 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
But when I use tnsping, it seems like that it's OK.
niu@shuang:~$ tnsping shuang
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 06-MAR-2007 11:41:59
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
OK (0 msec)
I searched all the website, but I can't find any hint.
Would someone please help me?
Any help would be appreciated and thanks in advance.

$sqlplus sys/syspassword as sysdba
SQL>startup;Thank you for your instant reply.
I did as you said, but I got the following error:
niu@shuang:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin$ sqlplus sys as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Mar 6 11:54:57 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01031: insufficient privileges
Any other suggestion.
I'm sure that my password is correct.

Problem in Installing 9i Enterprise Edition

Can Someone help me with installation of 9i Enterprise edition. Whenever I run the setup it Asks the oracle home path and then gives installation successful in just 1 minute but actually it does not install anything nor does it asks for other directories and parameters given in the installation documentation of forms server. I am installing Forms and reports server from enterprise edition on an NT, 128 MB machine.
Are there any other prerequisites for installation of forms server.

Ensure that your $ORACLE_HOME environment is properly set. It shoud be different than where you installed the database. Ensure that you have write permissions to the directory you are trying to write to.

Problem during install Adobe digital editions 3.0 setup

my dears,
my ADE 3.0 does'nt run now, after a half jear!
A new installaton is'nt possible, because the same mistake-info is coming: Mistake on overwriting the data file D:\Eigene Dateien\My digital Editions\welcome.epub...see image:
The delete of the program data and all other data files and a new install was also unsuccessful! The same mistake-info was shown!
Have anybody an idea or a sulution?
many thanks

This is the Reader forum, and you should ask your question in the Digital Editions one,
http://forums.adobe.com/community/adobe_digital_editions

Problem in Installing Oracle Enterprise Edition 8.1.6 (Rel 2)

I am trying to install Oracle8i, in Windows NT with Service Pack 4. After installing product file, In Database configuration assistant, the progress bar is not at all moving. Even I have waited for 4 hours. My system conf. is P200, 128mb RAM with 4 GB HDD in NTFS format.

Hi,
Delete the old database with the help of the dbassist.
run dbassist again and create your custom database then at the end do not run the scripts - Save it to batch file.
run the batch file.

Install the Tutorial for Admin Edition 3.1

Hi
I have instaled Discoverer Administration edition 3.1 and after it Discoverer 3i for the web. In the Admin edition Icreated one EUL and Tutorial firs. It was O.K. But I deleted Tutorial and then the EUL. After it I created again new EUL and wanted to install the Tutorial but at the end of instalation there is appeared the message: INVALID FORMULA OR FILTER. Nothing else, no help.
Does anybody know how can I install the Tutorial again?

Sorry about that. I will make sure to stay away from any slang usage. When I said "bouncing" I meant to shutdown and restart the database. When I said "I imagined something just got hosed up" ... I meant that something funny was going on with the database. What relase are you currently using for Discoverer? There is a patch release fix (version 3.1.41) that can be applied to versions 3.1.25, 3.1.26, 3.1.27, 3.1.28, 3.1.36, 3.1.37, 3.1.38 or 3.1.40. So you may want to upgrade to this patch if you are not already using this. Then start back over trying to do what you have been doing. This could fix the problem you are experiencing. Hope I have been able to help more then I did the first time. Once again I apologize for my use of slang words. Good luck!

I cannot install Discoverer, problem of the OraHome

Hi
I have problem with instalation of the discoverer 3.1 or 3i.
I have instaled the database Oracle8i on default OraHome with name 'OraHome81' and I use more than one OraHome. One for WebDB with name 'OraHomeWDB' and one for OAS 4.0 with name 'OraHomeAS'
I want to install Discoverer on the same maschine but when I create another one OraHome for example with name 'OraHomeDV' it says that Discoverer do not support the nultiple instalation and therfore it cannot be instaled on orahome 'OraHomeDV'. It can be only instaled on orahome 'OraHome81'.
When I install the Discoverer to orahome 'OraHome81' it says that this place "d:\...\orahome81" is stil as orahome for 'Oracle 816 Production' and it cannot be used for orahome for 'nt'
Does anybody know how can I install Discoverer?
null

Look at the note below
PURPOSE
This document describes how to install Discoverer 3.1 for Windows or Discoverer
3i server on machines where Oracle 8i, or another product installed using the
Oracle Universal Installer already exists.
Installing Discoverer when Oracle 8i already installed.
If you try and install Discoverer (either Discoverer 3.1 for Windows or Discoverer
3i Application Server) on a machine where Oracle 8i (or some other product which
uses the Oracle Universal Installer) already exists you will see the following
error message or something similar:
"Discoverer User Edition does not support multiple installations, and therefore
cannot be installed on 'Default_Home'. It can only be installed on 'OraHome8i'.
In order to install Discoverer User Edition, please run Oracle Installer again,
and select 'OraHome8i'as the target location.",
where Default_Home is the name of the standard Oracle home and OraHome8i is the
name of the Oracle Home for Oracle 8i.
If you do as the message says, you then get the error, or something similar:
"The location specified, 'd:\oracle8i', is already used as an Oracle home for
'Oracle 816 Production'. It cannot be used as an Oracle home for 'nt'."
where d:\oracle8i is the directory of OraHome8i.
You need to install Discoverer in a non-8i home; so in the example above, in the
Oracle Home in the Orant directory rather than in the one in the oracle8i directory.
The problem is that in the registry, the value for the Default_home key has been
set to the Oracle 8i home. You need to change this to point to the standard
Oracle home. Back-up your registry before editing it.
- Run REGEDT32.EXE or REGEDIT.EXE from the command prompt to open the registry and
edit it.
- Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES and change the value
of DEFAULT_HOME from OraHome8i to Default_Home (or whatever is appropriate in
your situation).
- From the 'Oracle for Windows NT' program group, run the Oracle Home Selector
and select Default_Home. The Oracle Home Selector just makes this home appear
first in your path environment variable.
You shouldn't run into this problem if you create the Default_Home before the one
for Oracle 8i. But if Oracle 8i is already installed, you might find it best to
de-install all Oracle products, delete the registry entries and then re-install, but
create the Default_Home first.
Hope this helps
Sreeram

Looking for Discoverer Admin 3.1.36 or later

Trying to install Oracle Discoverer 3i. At
one point it says I need Discoverer Admin Edition version 3.1.36 or later and EUL version 3.1.77. The one available at technet is 3.1.25
Where can I get these latest version ? Thanks a lot

Release 3.1.36 of the Administration Edition will be available for download in a few days. This version will replace 3.1.25.
Regards,
Oracle Discoverer Team http://technet.oracle.com/

Discoverer Admin installation error

Hi,
I am getting this error when installing Discoverer Admin (Business Intelligence Tools 10g 10.1.2.0.0) on my win XP sp1 workstation. It says that it cannot install onto an existing oracle home where oracle database 9.0 or higher database is installed. I do have 9i client and 10g client installed on my workstation. Is there anyway around this without having to uninstall everything?
Thanks,

Hey.
I finally solved my own problem. It's not exactly the most elegant way, but I had to trick the installer into thinking this was a fresh install. under c:\program files\oracle\inventory there is a install.platform file. I changed the value in it to some other version from 912. The oui then complained that the inventory could not be found and would not move forward. I then went back and changed the value back to 912 and then clicked next in the oui again. This time it thought this was a fresh installation and I was able to specify another inventory directory. which I did. After that, the install went through. But I did not exit the oui when I modified the file.
Hope this helps others.
Thanks,
Piyush

Discoverer Admin. in multiple installation home?

It forgives, but this text is translated into the English.
I wait that they understand. It would like to know if has skill to install the Discoverer Admin. in multiple installation home?
I wait that they have understood.
Yours truly
iMaster_br
Brazil

when I try to install Discoverer Administrator in Oracle Home (client 9i) , it can not be installed because show following message:You should install Discoverer Administrator in a new ORACLE_HOME (not in an existing one). Please try this and see if it works.
If I try to install in other Home (with other directory), it indicates that it can only be installed in Oracle Home. I have trying to install manully each product but it fail when I try to install Discoverer Admin.You should not be prompted to install this tool in an existing ORACLE_HOME -- What is the message you are getting?
Thanks,
Hussein

9ias 1022 compatability with Discoverer Administration edition

Hi ...
I installed 9ias1.0.2.2.0 on 8.1.6 database.
I AM UNABLE TO CONNECT TO DATABASE through discoverer viewer .
I installed discoverer Administration edition 4.1.37 separately.
I installed end user layer tables into my database using
discoverer Administration edition 4.1.37 .But it was asking for
4.1.11 End user Layer tables. where can i get the the discoverer
administration edition version 4.1.11 software .
In oracle site i seen only 4.1.34 & 4.1.37 version for
discoverer administration.
I wouid appreciate any help.
Regards
Santhosh

Ranga,
The link provided:
http://otn.oracle.com/software/products/discoverer/content.html
is for Discoverer Administration 4.1.33f and the EUL tables shipped with it are not the right version that is needed by Discoverer Plus that ships with 9iAS 1.0.2.2. The release notes for 9iAS 1.0.2.2 mention that that the version needed is 4.1.36 or 4.1.37.
Thanks.
null

Discoverer Admin Version

Hi Friends,
We have Oracle Applications 11.5.10.2 , Database 10g, I would like install Discoverer Admin version on my laptop.
Please advise which version do I need to install?, that would be greatly appreciated if you could help me by giving exact file name to download.
B/W I could not fine direct "Discoverer Forum" link on "Discussion Forums" page, how could I access "Discoverer Forum" link?
Thanks,
Haribabu

Discoverer Forum link: Discoverer
Its under Discussion Forums » Data Warehousing and Business Intelligence » Discoverer
Kavitha

Problem in installing Discoverer Admin. Edition

Similar Messages

Maybe you are looking for