Problem in Installing Forms 6i on Pentium 4 Machine

Dear All,
I tried to install forms 6i on my Pentium 4 machine but I was not
successful. Later I come to know that for doing this I need a patch
to be installed. i searched the whole oracle and intel site but I
could not get it. If any one else have come with similair problem and
get the patch then please tell me the site address and path from
where I can download the patch.
Thanks
Sunil Kumar(OCP-DBA)

Are you talking about a Forms patch or the JInitiator patch ? Do a search for JInitiator and P4 and find your way to www.sun.com for the JRE patch you need for P4's. Or get Forms 9i.

Similar Messages

Problem in installing Forms 6 on Windows 2000

I have problem in installing forms 6 on windows 2000.
Please advise me.
null

Hello,
I've been using Dev 2000 ver 6i for several months sucessfully on Win 2K RC2. The compiled .fmx's work fine with the ver 6.0 runtime environment under NT 4.0.
The only problem is that the Forms Server won't work till the 1st patch set comes out
(only Oracle knows when!) , so you can't test or deploy the forms as web apps on Win 2K yet. OAS 4.0 appears to work ok on Win 2K.
I have been using the Beta version of Dev 6i and will upgrade to the release version eventually, probably when the patch comes out.
null

Why I can't install forms 6i on pentium 4 machine?

Hi,
I have installed forms 6i successfully.When I installed 9ids,I want to add some component within forms 6i,but when i
double click setup from the disk,it does not response.If my machine is not pentium 4,every thing is well.Who can help me?
lixz

Dear Manzur Elahi ,
You are absolutly right but he is asking about the
oracle 6i developer and the piv support the oracle develpler 6i the problem is any other
li xinzhu plz mention the error which is comming during
the instalaiton thx

Problem in Installing Forms 6i in Oracle 8

Hi there
I am a home user and at the moment studying for OCP Oracle Forms Developer Rel. 6/6i and I really need some good help.
I have some problem in the Installing the Orcale Forms 6i, I have already installed WinNT4 (Server) and Oracle 8.
SO far I have tried to Install Forms 6i four times but I failed. Due to this reason every time I had to also Uninstall the Oracle 8
from my system, because it started to give problems.
OK THIS IS THE PROBLEM :
When I installed Oracle 8, the user name was <system> and the password was <manager> in the SQL Plus. I used it for few times and worked fine. But when I installed the Oracle Developer 6i the SQL Plus didn't accepted the same user name and the password. I tried many commands that I could find in the Oracle documentations (On the CD) but so far nothing.
Need some command or any thing to over write the system so I can change the user name and password.
Plus when I use turn on my computer and run WINNT 4 (server) I get message that I have some problem in Oracle80.exe file and due to that my system hangs for couple of minutes.
I also want the sample tables, but I don't know the particular command for SQL *PL by which I can get the sample tables.
Please help me by suggesting what shall I do.
Regards
Mustafa
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by martin vonk ([email protected]):
Hi...
Source: Oracle support.........:-)
Installation Procedure
Follow this procedure to install Developer 6.0 and Oracle 8i on the same physical machine in separate ORACLE_HOMEs on NT:
1) Install Developer 6.0 using the instructions on the Developer CD.
Specify an appropriate drive and the ORANT directory as the destination. For example:
D:\ORANT
Note: You must install Developer in the Oracle home named DEFAULT_HOME.
2) Install RDBMS 8.1.5 from the Oracle 8i CD. Specify the following information when prompted for the Oracle Home and Full path:
Oracle Home ora8i
Full Path d:\orant\ora8i
Choose Typical Install
Global Database Name ora8i.us.oracle.com (This is an example)
SID ORA8I (This is an example)
As the product installs, a summary is displayed that shows the products that are installed and the space requirements.
When the installation is complete, the following information is displayed and the installer exits:
Oracle Database Configuration Assistant Alert Database Creation Completed.
Database Information
Global Database Name ora8i.us.oracle.com
SID ORA8I
Sys password change_on_install
System passwd manager
3) A TNSNAMES entry needs to be created in the tnsnames.ora file for the new Oracle 8i installation. You can find the file in:
d:\orant\net80\admin\tnsnames.ora
A default entry will look like this:
alias.world
(DESCRIPTION
(ADDRESS_LIST
(ADDRESS
(PROTOCOL = TCP)
(Host = )
(Port = )
(CONNECT_DATA = (SID = )
For example, if you installed on a machine with a HOSTNAME of TEST, a SID named ORA8I, on TCP/IP with port 1521, and an alias of NEW, you would create the following entry:
NEW.world
(DESCRIPTION
(ADDRESS_LIST
(ADDRESS
(PROTOCOL = TCP)
(Host = TEST)
(Port = 1521)
(CONNECT_DATA = (SID = ORA8I)
4) If you manually created the entry, save and close the tnsnames.ora file.
You can now connect to the local database instance of 8i using the DBSTRING as NEW. For example, you can connect as scott/tiger@NEW.
HTH
Martin<HR></BLOCKQUOTE>
null

Problem while install forms 11g

dear sirs
when i install forms and report 11g it give me error about jvm, and i try to install java se to solve the problem, but problem still
pls tell me how to solve or how to install this jvm, known that i use operating system windows 7 64bit

The problem is that you are trying to install a version of Forms 11g which needs a 64 bits JVM and you have a 32 bits JVM.
So you should install a 64 bits JDK and a 64 bits Weblogic (because the weblogic that comes with jdeveloper is a 32 bits weblogic).
Then you will be able to install the Forms you are trying to install, also look at this link to set the JAVA_HOME if you are installing on windows:
https://confluence.atlassian.com/display/CONF25/Set+JAVA_HOME+variable+in+Windows
Regards
Carlos

Problem in installing forms 6i/6

i want to install oracle9i and forms 6i on single pc(XP/2000)
but after installing forms oravle home gets changed and oracle9i dosent work
any solution????????

Hi,
Are you install both in Single Oracle_Home Directory.If Yes, Please install them seperately
Bhujendra

Problem with installing Forms 11g on clients

Hi all,
I have successfuly installed weblogic server and Oracle Forms 11g on a server and everything works fine. I need to install Forms 11g on different clients for developers. My question is that do i need to install Weblogic on every single client or i can use the one that i have installed on my server. If i can use the one that i have installed, please explain how i can do this because i have tried a lot and the installer does not go to next page after asking for email address.
Thanks in forward,
Shademani
p.s. The clients are Win Xp

Two recommendations:
1. Read this:
http://blogs.oracle.com/shay/2007/03/02
2. If you are new to the product and/or product version, you should probably read the documentation before starting to install. Here is the url to the installation guide. This is a good starting place.
http://download.oracle.com/docs/cd/E17904_01/install.1111/e10421/toc.htm
The installation guide explains what is needed and how to install.

Problem To install Forms Demo

Hi
I downloaded Forms Demo available on Sample code for Forms. This is what happened to me.
1- When I m trying to install Demos in Forms 6i Home , it says that can't install in this Home.
2- When i try to install in a new home, it ask for Form server to be installed before demos, When i do so, and again try to install Demo's, then it shows same problem as mentioned in (1).
What's the exact way to install Demos ?
One thing more , Is webdb available for download on oracle site ?
Thanks in advance
null

One thing more , Is webdb available for
download on oracle site ?WebDB has been replaced by Oracle9iAS Portal, which is available for download. If you really want information about the old WebDB, you can get it here.
Regards,
-rh
null

Problem after installing OracleAS portal on DHCP machine.

Hi
I'm currently running Windows Server 2003 R2 on VmWare, and have installed OracleAS portal on a DHCP machine. However it has been causing me problems, and I realized I have overlooked the system requirements (Section 4.2) by not installing a loopback adaptor prior to the installation.
Now, my portal server goes down whenever the IP addresses changes and I'm at a loss on what to do. I have installed my portal on the following IP config details:
IP address: 10.0.1.105
Subnet Mask: 255.255.248.0
Default Gateway: 10.0.0.1
However the recommendations (on the documentation Section 4.8.6.3) were for me to use the following IP config details:
IP address: 10.10.10.10 (or 192.168.x.x) [x is any value between 1 and 255]
Subnet mask: 255.255.255.0
Thus even if I have followed the instructions on Section 4.8.6.3 (after I have installed the portal) - The server won't be running because the host is still on 10.0.1.105. What happened after my IP changed was error pages that ranges from:
- 505 Server Down
- The connection timed-out
This my first time installing an Oracle Product, and I'm new to networks so I would really appreciate any help and advice on this problem I'm facing. I'm not sure what other details that I need to give for you to effectively help me solve this problem. Please help.
Thanks!!

The 2gb partition i talked about it's the one given by using INTERNET RECOVERY, so, it seems that i do not have any recovery partition in my mac, so, problem resumes to restoring system by the last copy in time machine which is not showing in internet recovery, but it does shows in my user account.
Thanks for help!

Problem to install Package on the target machines

hi everyone
I want to use Remote Desktop to install new softwares on many clients through LAN. But I read some posts about the problem. It needs a software "PackageMaker" to make pkg-format. I have some question about the PackageMaker.
1- I have Remote Desktop v. 2.2. Is PackageMaker going to work with this version?
2- We have more than 300 clients and will update or fresh install Adobe package (Photoshop, ILLustrator and InDesign). This package is too big, some GBs. Is PackageMaker going to work?
3- If question 1 and 2 are not going to work. I will think about Remote Desktop v 3.0. Is this version 3.0 going to work? Because I did not use it
4- If question 1 and 2 are going to work. Where can I buy PackageMaker?
PS! We use Mac OS Server 10.4.6 and Mac OS Client 10.3.9
Thank you very much
Best Regards
Tri

both ARD versions 2.2 and 3 can install packages.
PackageMaker is free. You can get it by installing the apple developer tools. i think PackageMaker will successfully create the package but I think it'll be incredibly large and problematic to try to push out 1 package that is larger than 2 gigs. You may be better off creating a different package installer for each individual app.
Also Adobe CS (1 and 2) is a huge pain to install due to all of the files necessary for it to work. It puts files in the user's home folder and this can cause lots of problems when trying to install remotely... prompting for an admin to authenticate if it needs to make a change. I wish you much luck with this aspect.
ARD 3 is supposed to be better able to handle something like pushing out a large package but in reality, version 2.2 may work just as well for you.

How to install forms and reports 6i

I am facing a problem while installing Forms 6i. The following are the details.
I successfully installed Oracle 9i first under F:\oracle\ora90. While installing Forms 6i, I selected the "Typical" and gave the path as "F:\oracle\ora90" and clicked on the Next Button. Immediately I got an error message as "The location specified, 'F:\oracle\ora90' is already used as an Oracle home for 'Oracle 82 Beta'. It cannot be used as an Oracle home for 'nt'".
Could any one give the information of how to install forms and reports 6i. It ll be of great help to me.

use F:\oracle\ora90 as your oracle-db-home
use F:\oracle\forms6 as your forms-home
try it
Gerd

Problem with 8i & forms 6i on same PC?

Can 8i and Forms/reports 6i be used together on a stand alone PC(win 98). I can get 8i working ok but problems when installing forms 6i doesnt seem to like default directory but doesnt work in alternative one either?
Please can anyone help thanks
null

On NT4.0 it works this way:
Install
at first Forms 6.0i in \Orant (Orawin on Win98), DEFAULT_HOME, afterwards the database
Oracle 8i in \Oracle\anyDir, any_HOME.
This can be on the same disk. Try it on Win98. It works best on Win NT4.0/SP4(5). Win 2000 Pro is not so easy.
Wolf
null

How to install forms and reports 11g in developer machines

Hi All,
I have installed Database server 11.2.0.1.0 and installed application server forms(32bit) 11.1.1.4.0 separetely in two machine. Forms and Report builder working fine and connecting to the database.
I have 5 Developers working in forms11g and reports11g .
What i need to install in 5 developer systems.
Please clarify at the earliest
Thanks in Advance
GV

This came up awhile back, read the entire thing and make sure you use the same versions.
Oracle 11g Developer suite installation
Note that you will need to install Weblogic Server before you can install Forms 11g.
Best Regards
mseberg

How to install forms 6i on the same machine oracle8i installed

I have oracle8.1.6 release 2 installed on microsocft windows 98. How do I installed forms 6i on the same machine. when I installed forms6i, it has overwritten the resgistry settings and I cannot run database any more. Please give me some ideas how to install all these on the same machine on windows 98 , operating system DOS.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Simon Jennings ([email protected]):
You need to use seperate Oracle homes.<HR></BLOCKQUOTE>
You have to install Forms6i on a different Oracle_Home not Default_Home, which I believe is where you installed Oracle8i.

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Problem in Installing Forms 6i on Pentium 4 Machine

Similar Messages

Maybe you are looking for