Problem in installing iAS6.5 (under clustering) on solaris 8
I installed iAS 6.5 on solaris 8. The system is consisted of one web server and 2 application servers. The directory server is installed in only one application server and the other application server used that. Of course, those servers are the same clustering group.
But on installing 2nd server, the error is occurred. After I input the application server's admin id and password, the error message is shown like following.
******* Error Message *******************
Invalid entry it may be due to :
1)Suffix which is the root of your user directory tree does not match with Administration Domain of configuratio
n directory server.
2)The iAS-AT Username entered (admin) already exists in the Directory Server, with a DIFFERENT Password.
Please press ENTER, and then re-enter the Username and Password
I installed the servers following the install guide about clustering on solaris.(http://developer.iplanet.com/appserver/samples/cluster/docs/unix-cluster.html)
Please help me how to resolve this problem.
Thank you.
I resolved this problem. I think it is iplanet bug on installation.
I tried to register the application server's admin id in Directory Server in setup but the install program did not work nomally. After many trial and errors, I checked the setup log file, ldapmod.log, which is existed during installation and deleted after setup. I showed the line that is the install program tried to add the entry without suffix like dc=sun, dc=com in this file.
So I attempted to enter the admin id included the suffix. It was occurred the error message like "Bad Command" and passed the next page of installation. I completed the installation successfully. Of course some error messages is shown during configuration iAS Administration Tool but it is no regards. After setup, I tested the cluster and fail-over and it worked well.
Thank you for your concern.
Similar Messages
-
Please help me, a problem when install oracle 10g on the solaris 10
currently, I am installing the oracle 10g on the solaris 10, I am using DHCP and
my computer has no hostname, the following is copied from the 10g document,
When you run Oracle Universal Installer, an error may occur if name resolution is not set up. To avoid this error, before you begin installation, you must ensure that host names are resolved only through the /etc/hosts file.
To ensure that host names are resolved only through the /etc/hosts file:
1.
Verify that the /etc/hosts file is used for name resolution. You can do this by checking the hosts file entry in the nsswitch.conf file as follows:
# cat /etc/nsswitch.conf | grep hosts
The output of this command should contain an entry for files.
2.
Verify that the host name has been set by using the hostname command as follows:
# hostname
The output of this command should be similar to the following:
myhost.mycomputer.com
currently, when I use hostname command, it is unknown, what should I do to add
my hostname? thanksSince this is related to Solaris, you will most likely get a better/faster response on a Sun Solaris forum rather than here.
Srini -
Problem while installing oracle 10g 2 on solaris x86
bash-3.00$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 1133 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2070 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 1
6777216 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-12-27_11
-46-01PM. Please wait ...bash-3.00$
After that $ prompt I do not get anything... did I miss out something...
bash-3.00$ env |grep -i oracle
OLDPWD=/export/home/oracle
MAIL=/var/mail/oracle
PWD=/export/home/oracle/database
HOME=/export/home/oracle
LOGNAME=oracle
Plz help....I think it has got to do something with my profile...
plz see...
bash-3.00$ cat local.profile
# Copyright (c) 2001 by Sun Microsystems, Inc.
# All rights reserved.
# ident "@(#)local.profile 1.10 01/06/23 SMI"
stty istrip
PATH=/usr/bin:/usr/ucb:/etc:.
export PATH
bash-3.00$
bash-3.00$ echo $DISPLAY
unknown:0.0
bash-3.00$ xclock
bash: xclock: command not found
bash-3.00$ usr/openwin/bin/xclock
bash: usr/openwin/bin/xclock: No such file or directory
bash-3.00$ -
Problem facing installing Solaris 10 on Dell inspiron 6400.
Hi,
I am facing problem in installing Solaris 10 on my Dell inspiron 6400.
It is giving "cannot find driver for screen device /isa/motherboard@1,61" error.
Please help...
Thanks In Advance
SaurabhHi all,
I've also the same problem, I tried the 11/06 but after GRUB , it hangs. HereBelow the HCL.
No Solaris Driver
No Solaris Driver
Multimedia
Intel Corporation
82801G (ICH7 Family) High Definition Audio Controller
No Solaris Driver
No Solaris Driver
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
Solaris 10 11/06
Solaris 10 11/06
Firewire
Ricoh Co Ltd
Unknown device
hci1394
Note-1
Note-1
Network
Broadcom Corporation
BCM4401-B0 100Base-TX
bfe
Solaris 10 11/06
Solaris 10 11/06
Video
Intel Corporation
Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
vgatext
Solaris 10 11/06
Solaris 10 11/06
Storage
Intel Corporation
82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE
pci-ide
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB UHCI #1
uhci
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB UHCI #2
uhci
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB UHCI #3
uhci
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB UHCI #4
uhci
Solaris 10 11/06
Solaris 10 11/06
USB
Intel Corporation
82801G (ICH7 Family) USB2 EHCI Controller
ehci -
Problem while installing solaris 10 on HP proliant DL 380 G5.
Hi,
facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]I have a similar issue trying to load Solaris 10u4 on an IBM x236.
I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
You may have to do something similar.
And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected. -
Problems in installing msi k9n6gm-v drivers in sun solaris
I have problems in installing drivers of my msi motherboard. Please help me. Also im new in using sun solaris. I dont know how to run executable and .ini files format which is windows compatible.
You are new to the forum, so some advice:
Do not post the same question to multiple forums.
Pick one and place it there.
You will get a response or you will not get a response.
Cross-posting will not get any answer, any faster, and it is considered bad forum manners.
ini and exe files are for Microsoft's OS.
They don't work in *NIX.
Your motherboard drivers are for Windows and cannot be used for Solaris.
Here are a few links for you to spend some time with:
http://www.sun.com/bigadmin/hcl/hcts/device_detect.html
http://www.sun.com/bigadmin/hcl/
http://72.5.124.61/software/solaris/howtoguides/installationhowto.jsp
http://docs.sun.com/app/docs/doc/817-0544/ -
Out Of Frequency problem -- After Installing solaris 10 x86
Hi Solarians,
After installing solaris 10, I am getting "*Out Of Frequency*" problem and I am not able to login to Desktop session. Please let me know configuration changes that i need to make along with exact paths as i am new to solaris.Currently i am running dual OS (XP and Solaris).
Out of Frequency
HF: 42.7 KHZ
VF: 40.0 HZ
Operating Frequency
HF: 30 - 71 KHZ
VF: 50 - 160 HZ
Please help me solve this problem, Thanks in advance .....
Thanks,
Maheshhi;
I faced that problem when I was a beginner on solaris as you were. I tried to install solaris to my windows installed x86 based PC. in my fisrst few attempts ý always saw that message, afterwards somehow I managed to install solaris to my PC but this time windows failed.I think that is because of the inconsistencies between those OS but if you need to install solaris you can use VM ware workstation with this software you can use both OS without problems. -
Hard disk problem after installing Solaris 10 u5 on a Sun Ultra 24
Hi.
After receiving a new Sun Ultra 24, shipped with Solaris 10 u4, the first thing I did was installing Solaris 10 u5. X wouldn't start but that was not a big problem and installed it in text mode. Installation went fine but, when the system starts, a single beep is heard and after some seconds some warning message appear on the console, before the "Hostname: ..." message, informing that some read operation on my hard disk had timed out and were aborted. The system then starts up normally. The only other anomaly is that the diagnostic partition in unbootable.
I ran the hard disk tests from the tools and drivers CDs and all of the tests were passed. Solaris 10 u4 was working normally so I'm wondering if this may be a bug.
Thanks for your help,
Enrico.Thanks anyway, I discovered what the problem was: a bug in Solaris 10 u5:
http://opensolaris.org/jive/thread.jspa?threadID=58768&tstart=75
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6536722
Thanks,
Enrico -
Cannot install JMF under Linux Mandrake 10
I simply cannot install JMF under the Mandrake 10 Official Linux distribution. I downloaded the jmf-2_1_1e-linux-i586.bin file and tried to execute it as root. It unzipped some files then showed me an error message about AWT and GTK+. I found a hack consisting of modifying the .bin file to have the PATH variable point to SUN JDK, the error does not show up, but the installation still does not work. In fact, the installation works, but the Diagnostics applet keeps telling me than class files are not present. My Mozilla 1.6 Java plugin is working and displaying the applet. My JMF lib directory does not contain sound.jar, such jmf.jar. I set the CLASSPATH and LD_LIBRARY_PATH according to the readme.html file. I would like to know if it is a compatibility problem with Mandrake 10, the 2.6 kernel or if JMF just DO NO work under Linux. In the latter case, JMF is a violation to the Java portability philosophy and I would never use it on my own initiative, just if I were asked to.
After the files are unzipped, I have the following warning and error messages.
Warning:
Name: HorScrollBar
Class: XmScrollBar
The specified scrollbar value is greater than the maximum
scrollbar value minus the scrollbar slider size.
JavaSound Capture Supported = true
JavaSoundAuto: Committed ok
java.lang.Error: Can't open video card 0
java.lang.Error: Can't open video card 1
java.lang.Error: Can't open video card 2
java.lang.Error: Can't open video card 3
java.lang.Error: Can't open video card 4
java.lang.Error: Can't open video card 5
java.lang.Error: Can't open video card 6
java.lang.Error: Can't open video card 7
java.lang.Error: Can't open video card 8
java.lang.Error: Can't open video card 9
Done.
Even if I do not have a working video capture card (I have an ATI All-in-Wonder 128 but it is not working under 2.6 kernel), JMF should work because some people do not have a video capture card. I also tried with the cross-platform ZIP file, but this one does not contain sound.jar either and the Diagnostics applet keeps complaining about missing class files. I tried to search on the Web for solutions to this problem or for a way to change the CLASSPATH used by the Mozilla Java plug-in (if it uses a different CLASSPATH than the one from the environment variable), but nothing, nothing. Is there a distribution from which JMF would work better than Mandrake 10? Or can JMF work only under Microsoft Windows or Sun Solaris? I also tried Blackdown, but a README file directed me to the Sun's page, nothing to download here about JMF.well, your not the only one.
I have it working in Debian, and JDS.(JMF is setup automatically in JDS).(2.6.6 kernel)
I looked at the installation structure of JDS, and was able to duplicate what they did for Debian.
Maybe it will work for Mandrake two??
ok, all you have to do is copy or create soft links from your Mozilla directory, just like you did with the java plugin, and link to all the *.so files in JMF-2.1.1e/lib directory.
Should work.
I also read that not haveing the native files only matters if you are doing Capture. not play.
to get your ATI All-in-Wonder 128 to work, make sure you install the correct driver, and have it working under linux, then try it in JMSTUDIO -
Management console problem after installing recommended patch cluster
Hello everyone.
I just got a new SUN 440 server, it didn't come with the solaris os installed and so I installed solaris 9 12/03 to it. The installation went fine and I could start the management console with no problems at all. Then I went to sunsolve.sun.com to download the latest recommended patch clusters for solaris 9 (this was yesterday Sept.-06-2006), I downloaded the file, checked it with md5sum, unzipped it, went to single user mode and ran the install_patch script. After the patch cluster finished installing I rebooted the server for the patches to take effect, I logged in, tried to run console management 2.1 and it starts OK but I cannot use any services it offers because it says (in the console events):
"Server Not Running: no solaris management console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running"
When I click on "See Exception" I get (for a particular service that is... in this case com.sun.admin.fsmgr.client.VFsMgr - for managing file systems):
java.rmi.RemoteException: Server RMI is null:
at sun.com.management.viperimpl.client.ViperClient.lookupServer(ViperClient.java:376)and so on...
I already checked that the service is running on port 898 and it seems that there is no other app. using that same port. I also restarted the service using /etc/init.d.init stop/status/start but I get the same results.
I don't know solaris very much and don't know what else to do, please help.
Thanks in advance.Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O -
Problem about Installation J2SDK1.3.1 on Solaris 2.6
hi,happy new year everyone,
I have installed J2SDK1_3_1_02-solsparc.sh on Solaris 2.6, and it prompted to me installation sucessfully. but when I run javac or other commands, it prompts to me the following error:
**************************************************************Error: failed /usr/local/apps/j2sdk1_3_1_02/jre/lib/sparc/client/libjvm.so,because ld.so.1: /usr/local/apps/j2sdk1_3_1_02/bin/./../bin/sparc/native_threads/jav
ac: fatal: libCrun.so.1: open failed: No such file or directory
I have checked the setup file size. and there is no ld.so.1 in any directory.
Who can tell me why and how to resolve it? thanks a lot.I had exactly the same problem. You need to apply patch 105591-12. This solved the problem.
-
Problem with Installing Nokia Ovi Store in E51
I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.
Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button" -
Help!!! Error while installing Oracle9i Application Server on Solaris 5.8
I have installed oracle 9i on sun solaris 5.8. it has the original seed database provided by oracle.
I am doing runinstall from disk1 directory of 9iAS and trying to install Oracle 9iApplication Server 9.0.2.0.0
after this I get a screen with Installation types where option A is selected by default (which installs J2EE, Webcache, HTTP server)when I press next it does setting up install types and displays the following message
" Your local host name database file(typically /etc/hosts) is not configured properly. This file should have and entry of the form:
<IP_ADDRESS><FULLY_QUALIFIED_HOSTNAME><ALIASES>
on solaris systems, the following files should also contain the fully qualified hostname, including the domain name:
/etc/nodename, /etc/net/ticlts/hosts, /etc/net/ticots/hosts,/etc/net/ticotsord/hosts and any files in /etc whose name begin with 'hostname'
Failure to properly configure this file may result in product runtime issues regarding proper hostname resolution."
the /etc/host file has two entries one for loopback and other hostname which are in proper format except there is no alias for loopback.
Am I doing something wrong or was the oracle installation not proper.
I logged in as 'oracle' and changed all files. Next time when i tried to login using oracle acct and tried to open a terminal the screen went black.
How do I install Oracle9iAS.I am having a similar problem with an Oracle 8i install. It seems that the 9i install
heads off this same problem before running into it. There must be a file it sees
as not being properly updated with the host information. I checked all of the
host* files that I could find and they seem to be correct.
Please let me know when someone answers the question at both addresses
below:
[email protected] and [email protected] -
I can�t install Sun Studio 11 in Solaris 8
Hello!!
We are trying to install Sun Studio 11 on our Server.
The server is running under Solaris 8, we install J2SE 1.4.2_10 SDK prior to run the Sun Studio installer, but when we run the installer, it report the following error
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.fetchChildWizards(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.perform(Compiled Code)
at com.sun.wizards.core.Sequence.perform(Compiled Code)
at com.sun.wizards.core.SequenceManager.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at java.lang.reflect.Constructor.newInstance(Native Method)
at install.instantiateArchiveReader(ArchiveClassLoader.java:203)
at install.<init>(ArchiveClassLoader.java:143)
at install.main(Compiled Code
Some one has any idea?
Thank you in advance.
PD: Sorry for my English, I�am a beginner English student, please be pacient.i've installed java 1.5.0b06 and I can install SUN Studio 11 in Solaris 8
feedback:
==========================================================
# echo $PATH
/usr/j2se/jre1.5.0_06/bin:/usr/j2se/jre1.5.0_06:/usr/sbin:/usr/bin
# java -version
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing)
==========================================================
but when i try to install
==========================================================
# ./installer -nodisplay
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.fetchChildWizards(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.perform(Compiled Code)
at com.sun.wizards.core.Sequence.perform(Compiled Code)
at com.sun.wizards.core.SequenceManager.run(Compiled Code)
at java.lang.Thread.run(Thread.java:472)
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at java.lang.reflect.Constructor.newInstance(Native Method)
at install.instantiateArchiveReader(ArchiveClassLoader.java:203)
at install.<init>(ArchiveClassLoader.java:143)
at install.main(Compiled Code)
===============================================================
so i am confused or maybe i have to install 1.4.2.10?? -
Problem to install SAP R/3 4.6 on Windows server entreprise 2003
Hello all,
I've a problem to install SAP R/3 on a windows enterprise server 2003.
This is the step I made :
1) Install Windows enterprise server 2003
2) Add IPX and Netbios to the network (adress ip 192.168.10.2)
3) Add 192.168.10.2 srv1 SAPTRANHOST to the hosts file
4) Create User - C11adm; Assign administrator privileges
5) Start Update DLL's from Kernal CD.
6) Login as c11adm and Install Oracle 9.2 with the options :
File locations :
Source :
Path : no change the path
Destination :
Name : C1192
Path : C:\oracle\C11\92
Available Products :
Oracle9i Database 9.2.0.1.0
Installation type :
Enterprise Edition
Database configuration :
General Purpose
Oracle service for Microsoft Transaction server
Port number : 2030
Database Identification :
Global database name : srv1
SID : srv1
Database File location :
c:\oracle\oradata
Database charactere set :
Use the default charactere set
7) Stop all oracle services
8) Install oracle 9.2.0.4.1 patch :
OUI - V 2.2.0.18.0
Oracle 9iR2 patch set 9.2.0.4.0
9) Install SAP R/3 disc 4.6D EXT Kernel
INSTGUI options:
Sap system name : C11
Install Directory : C:\USERS\C11ADM\Install
Sap Release to install : R/3 4.6C SR2
Error : CDINSTEXTRACTSAPMMCMSC_NT_IND InstallationDo 2342
Does somebody could help me ?
Regards.
4. Give all users access to ora_dba
5. Restart, login as c11adm and continue installation.Hello Peter,
For the note 578004 Sap said :
a) Copy the content of the respective Kernel CD to a local empty working directory.
For example, for a 4.6C SR2 system you use the 4.6C SR2 Kernel CD, for APO 3.0A you use the Kernel CD for APO 3.0A, etc.
But for myself, i don"t understand what they said because I Want to install 4.6c and they said "use the 4.6c SR2 Kernel CD" but where I can find this CD because I downloaded the files below :
50045631_1 Online Docu 4.6C Disc 1 HTML Help Windows 9x/NT German
50045631_2 Online Docu 4.6C Disc 2 Standard HTML German
50045631_3 Online Docu 4.6C Disc 1 English HTML Help for Windows 9x/NT
50045631_4 Online Docu 4.6C Disc 2 English Standard HTML
50046529 R/3 4.6C SR2 Installation Documentation
50056848_1 DVD 4.6C Online Documentation (3) 1 of 11
50056848_10 DVD 4.6C Online Documentation (3) 10 of 11
50056848_11 DVD 4.6C Online Documentation (3) 11 of 11
50056848_2 DVD 4.6C Online Documentation (3) 2 of 11
50056848_3 DVD 4.6C Online Documentation (3) 3 of 11
50056848_4 DVD 4.6C Online Documentation (3) 4 of 11
50056848_5 DVD 4.6C Online Documentation (3) 5 of 11
50056848_6 DVD 4.6C Online Documentation (3) 6 of 11
50056848_7 DVD 4.6C Online Documentation (3) 7 of 11
50056848_8 DVD 4.6C Online Documentation (3) 8 of 11
50056848_9 DVD 4.6C Online Documentation (3) 9 of 11
50078731_1 NW 2004s SR1 Presentation - Adobe LiveCycle Designer 7.0
50078731_2 NW 2004s SR1 Presentation - SAP Content Server 6.40
50078731_3 NW 2004s SR1 Presentation - MaxDB Release 7.6.00
50078731_4 NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 1/3
50078731_5 NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 2/3
50078731_6 NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 3/3
50078731_7 NW 2004s SR1 Presentation - Server Components Compilation 5
50081125 CD SAP License Keys & License Audit
51013953_1 R/3 4.6C SR 2 Export CD 1
51013953_2 R/3 4.6C SR 2 Export CD 2
51013953_3 R/3 4.6C SR 2 Export CD 3
51013953_4 R/3 4.6C SR 2 Export CD 4
51013954_1 R/3 4.6C SR 2 Language CD 1
51013954_2 R/3 4.6C SR 2 Language CD 2
51013954_3 R/3 4.6C SR 2 Language CD 3
51013955 R/3 4.6C SR 2 Language JA
51013957 CD 4.6C SR2 Language TH
51013998 R/3 4.6C SR 2 Language ZF
51018621 CD mySAP.com 4.6C Language Romanian
51019432 CD Oracle9i Database Onl. Docu. 9.2
51019883 CD 4.6D SAP Kernel ORACLE NT/IA64
51020564 CD 4.6D EXT Kernel ORACLE NT,AIX,HP-UX
51030122_1 Oracle 9.2 NT 1/3
51030122_2 Oracle 9.2 NT 2/3
51030122_3 Oracle 9.2 NT 3/3
51030122_4 Oracle 9.2.0.4.1 NT
51030122_5 Oracle Failsafe 3.3.2 NT/Intel
51030123_1 Oracle 9.2 NT/IA64 1/2
51030123_2 Oracle 9.2 NT/IA64 2/2
51030123_3 DVD ORACLE RDBMS 9.2 NT/IA64
51030123_4 DVD ORACLE RDBMS 9.2 NT/IA64
51030123_5 Oracle Failsafe 3.3.2 NT/IA64
51031095_1 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 1 von 12
51031095_10 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 10 von 12
51031095_11 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 11 von 12
51031095_12 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 12 von 12
51031095_2 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 2 von 12
51031095_3 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 3 von 12
51031095_4 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 4 von 12
51031095_5 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 5 von 12
51031095_6 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 6 von 12
51031095_7 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 7 von 12
51031095_8 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 8 von 12
51031095_9 DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 9 von 12
51031592 CD SAP R/3 4.6C SR2 Language KO
51031593 CD SAP R/3 4.6C SR2 Language ZH
51031614_1 Oracle 9.2 Patch Set 7 AIX 64 64Bit
51031614_2 Oracle 9.2 Patch Set 7 Tru64 64Bit
51031614_3 Oracle 9.2 Patch Set 7 HP-UX PA-RISC 64Bit
51031614_4 Oracle 9.2 Patch Set 7 Linux I386 32Bit
51031614_5 Oracle 9.2 Patch Set 7 WIN I386 32Bit
51031614_6 Oracle 9.2 Patch Set 7 WIN IA64 64Bit
51031614_7 Oracle 9.2 Patch Set 7 Solaris 64Bit
51032345 Supp.Pack.Coll. 4.6C-47x200 2006/12
Regards.
Maybe you are looking for
-
How do I use my built in ISight with MSN?
All my friends I want to talk to are on MSN, I have the most recent version of it but when they invite me to a webchat, I do not get any invitation, is ter a solution, it seems no one I know knows, any ideas gratefully received. Thanks.
-
I am trying to reinstall CS5 Production Pro-serial number is invalid
I am trying to reinstall CS5 Production Pro on a new computer. The computers that I had this program on have died. I am trying to reinstall on a new computer. I have been on hold for almost an hour and the customer care chat I've been on hold for tha
-
Why does double clicking not open desktop folders?
After installing OpenOffice, my Mac Mini suddenly lost the ability to open desktop folders by double clicking. Open Office does not have a de-installer that I can locate. Please advise. Thank you!
-
Can't enter serial number during i phone 4 registration. Plse help
I am trying to register my new iphone 4 but when i get to the serial number there is no filed to enter the number. Plse help! Thanks
-
Layer Mask Does not totally clear
PS CS2. 4 GB Ram 500 GB HD, Win Vista Home Premium. When I create a duplicate or other layer and try to clear portions of the layer, using a mask: I do not get a clear removal. There is an outline of maybe 1 to 3% that will not clear no matter how ma