Problem in installing J2se dev. kit 5.0 update 8

Hello,
I am using win XP as my OS. I just want to install the J2SE standard edition dev. kit so i downloaded it from internet and once i am going to install it, after coying some files, it shows me the error no. 1335 and saying that the cabinet file data1.cab required for this installation is corrupt and cannot be used and the whole transaction is roll back. Pls. suggest what to do ? I am new to java technology and wants to write java programs and wants to compile. What to do? I have already downloaded ths J2SE dev. kit 5.0 update8.
Pls. suggest

I would suggest you download the file again. It's possible, though rare, to download an entire file from the Internet and have corruption in the file.
Brian

Similar Messages

Failure installing J2SE Dev Kit 5.0 update 3 on laptop w/ Windows XP SP 1

Using either of the online or offline installation packs for Windows I end up with an error dialog stating 'The system cannot open the device or file specified'.
Clicking 'Retry' doesn't help. Clicking 'Cancel' brings up another dialog with a message like...
Internal error 2755. 110, C:\Documents and Settings\smart61\Local Settings\Application Data\{32A3A4F2-B792-11D6-A78A-00B0D0150030}\J2SE Development Kit 5.0 Update 3.msiThe installation works fine on a desktop machine but fails every time on every laptop I've tried.
Any advice? I've seen other old threads referring to error 2755 with msi's. But none of the solutions I've seen seem to apply. If someone has a simple recipe for fixing this, I would be quite grateful.
Thanks,
~chuck

There is quite a list of non-Java posts that address this error, see
http://www.google.com/search?q=%22Internal+error+2755%22The problem is related to the Microsoft Installer.

Un-installing "perl devi kit 7" from Active State

I would like to know if anyone has experience with manual uninstalling the program. I could not find the file in the folder i was pointed to by the email bellow and a i could not find the guide mentioned either.
If anyone knows of a program that searches by time stamp this could make the job easier.
Thanks for the time taken to answer the this question.
This was an email sent to me.
-Thanks for your email. There is a small section at the bottom of the
-installation guide for uninstallation instructions:
-Mac OS X
-Run the following command:
- sudo "/Library/Receipts/Perl Dev Kit.pkg/Contents/Resources/uninstall"

Why not just drag the program to the Trash?

Having problems re-instaling HP Deskjet 3050 software on updated OS Mavericks

Hello,
I have recently updated my OS system to Mavericks 10.9.5 and I was having some trouble printing and scanning on my HP Deskjet 3050.
I tried updating softwares available but nothing appeared related to my printer.
So, I decided to uninstall the HP software and try to re-install it.
But, when I insert the software CD that comes with the printer it says that the installer software in the CD is not compatible with my corrent OS system.
I tried visiting www.hp.com but I was not able to find a solution for my problem anywhere.
I searched again for software updates in my computer and nothing appears.
Could you please help me?
THanks,
Valeria

Hi, I copied your post because I to am having the same problem. I hope we get this resloved soon.
Thank you

Problem of installing biomedical startup kit 3

hi. I have installed labview 8.6, runtime engine and biomedical startup kit 3 on Windows 8.1. Why can I not find the biomedical kit on functions panel in labview8.3? I also installed labview 2012, but cannot find either. please help me with that.

What exactly did you install and in what order? What is LabVIEW 8.3?
Also note that LabVIEW 8.6 and LabVIEW 2012 are not officially supported in windows 8.1 (details).
LabVIEW Champion . Do more with less code and in less time .

Can't install J2SE Development Kit on D:\

Hi, I have very limited space on c:\
So, I told the installer to install on D:\
The installer tells me I need 187mb on c:\
I don't want anything installed on c:\
Why does this installer insisit on putting stuff on c:\!
I can't even get started with it. How do I make the installer understand I want to install on D:? I did the change on the first screen, but it still insists I need space on C:\ (where I have 34 meg)
My temp dir is on D:\ as well, so it should not be temporary space.
Frustratedly yours,
Larry

Hi,
I had the same problem, but C: was not even the partition with "Windows" installed.
I simlpy had temporarily freed the required amount of diskspace, JDK installed itself in the correct place. At least I think so. ;-)
Maybe "C:" is hardcoded somewhere in the installer for temporary extraction.
Guessingly yours,
Dangerseeker

HT4623 unable to install ios7.04 to ipad. I had no problem installing it to iphone 5c. Never had any problem before. installing any of the IOS 7 updates, just the IOS7 04

I am having a problem installing IOS 7. 04 to IPad. I had no problem installing it on my iphone 5c. I have didn't have a problem with any of the other installs. I wonder if anyone else is having a problem.

Thank you very much for your quick response. It took two tries, but it worked, it through me a curve, it directed me to plug in to my computer and go to iTunes, so that is how I did it. I am not very iPad savvy, so for me , it was a challenge . It also brought the iPad back to original set up. Had to set up all apps again. Oh we'll, I appreciate your help. Thanks again.

Startup Problems after Installing QuickTime and ITunes 7.5 Update

I went to Software Update today and Installed the new ITunes 7.5 and Quicktime update and after it finished, it asked me to restart the computer. After I restarted:
-All Desktop icons keep flashing at the same time every 3 seconds
-The top white bar with the apple logo in the left corner keeps disappearing and reappearing at the same time as the icons do.
-Every program I open closes within 5 seconds of me opening it, i am only able to open them in the first place because my dock is the only thing that does not disappear.
-Finder and System Preferences are not accessible.
I do not have the System Restore/Tiger backup CD's with me, If these are needed, is there any way possible to use the ones that come with an Intel MacBook, just to maybe repair the hard drive or whatever may be needed to be done?

Hello,
If you mean ... is it ok to use system restore disks that came with an Intel MacBook on an iBook G4, no, that's not possible. Your iBookG4 is a PowerPC... the MacBook has an Intel based chip.
If you installed software such as iTunes and QT updates and these problems just started as a result it may be that your iBook drive hasn't enough available space. If you can, open any Finder window. The amount of free drive space is displayed there. 15% or less is bad. If this is indeed the case, then try to move important files off that drive.
If you can run Disk Utility.. it's in your Applications/Utilities folder. Launch Disk Utility. In the panel on the left, select MacintoshHD 10.4.x, make sure the First Aid tab is highlighted, then click Repair Disk Permissions... that might help. I'd suggest you Verify the disk for errors but you can't do that without the iBook system restore disks.
One other suggestion is to purchase either DiskWarrior available here: www.alsoft.com
or TechToolPro available here: www.micromat.com (I've used DiskWarrior successfully 3 times on my iBookG4!
I hope something I've suggested helps...
Carolyn

Problem of install of GeForce 7300 GT Firmware Update 1.0

When I run the application to install this update I get -
"An unexpected tool error occurred (2). Your firmware cannot be updated."
Well, I keep getting the Apple Software updater ever time I turn on the MAC PRO but I can't get it to install this 1.0 Firmware Update ...
Any one know what I can do?

Exactly the same for me?
Anyone could help us?
Thank you.

HT6208 has anyone had this problem with installing the IOS 7.1.1 update - Enter Passcode? I never created one

Whats the enter Passcode all about when i've never created one?+

You need to enter the four digit passcode that you enter when you start your iPad or awaken it from sleep after an Autolock. If you do not remember the passcode you will have to restore the device. Here's a link to what to do when you forgot your passcode.
http://support.apple.com/kb/HT1212

Java CLDC Emulation (Java ME Dev Kit 3.0) installation problem

Hi,
I tried installing Java CLDC Emulation from Java ME Dev Kit 3.0 to two different devices and Windows Mobile 6 Professional Emulator with mixed results:
- Installation on Sprint phone went fine and I can open 'Sun Java CLDC Emu' from Start->Programs
- Installation on IPAQ110 & Windows Mobile 6 Professional Emulator went fine, however when I try to run it I get the following message:
"The file 'sun_jwc' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
I guess it has something to do with version of Windows since phone has Windows Mobile 6.1 Professional and IPAQ&Emulator Windows Mobile 6 Classic.
Can I just install some certificate into trusted store to make this work or Java CLDC Emulation from Java ME Dev Kit 3.0 works only with Windows Mobile 6.1 Professional?
Thanks,
Michael

Try this instructions:
1. Download and install Microsoft Device Emulator with device images for Windows Mobile 6 in "Network" emulator properties tab.
2. Download and install Microsoft Virtual PC.
Note: Installs virtual switch driver required for emulated network adapters.
3. Run Windows Mobile 6 Professional Emulator and bind its emulated NE2000 Network Adapter to a desktop network card.
Note 1: Consult the Microsoft device emulator documentation for instructions.
Note 2: Don't use ActiveSync for networking (cradling the emulator).
4. Write down the IP address of the emulator and the IP address of the host computer.
4.1. Open the Start menu on the emulator, click Settings, click Connections, click Network Cards, Click NE2000 Compatible Ethernet Driver.
4.2. Open Network Connections on the desktop, and display the status of the connection corresponding to the network card to which the NE2000 Network Adapter has been bound (step 3). Click the Support tab.
5. Open Emulator Properties.
5.1. Open the File menu.
5.2. Click Configure.
6. Set JavaMESdkHome\on-device\winmobile-arm as a shared folder in "General" emulator properties tab.
6.1. Browse to JavaMESdkHome\on-device\winmobile-arm.
6.2. Click OK.
7. Run File Explorer on the emulator.
7.1. Open Start menu.
7.2. Click Programs.
7.3. Click File Explorer.
8. Start the Sun Java CLDC Emulation CAB file installation.
8.1. Open Show menu.
8.2. Select Storage Card.
8.3. Click on the sun-java-cldc-emu.cab file.
9. Finish the installation and run the Sun Java CLDC Emulation.
Note: See the device installation for reference.
10. Register the Windows Mobile emulator in the Java ME SDK.
10.1. Open JavaMESdkHome\toolkit-lib\process\device-manager\conf\static-registrations.cfg.
10.2. Add the <device name>, <device ip>, <host ip> line into the file and save the changes (use the IP addresses from step 4).
As instance: MS_Emulator, 192.168.1.2, 192.168.1.1
11. Restart the Java ME SDK Device Manager.

Problem to Install the EMDIAG REPVFY 10g/11g Kit on 11gR2

Got following error when try to install EMDIAG REPVFY kit:
Package created.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY MGMT_DIAG:
LINE/COL ERROR
5523/10 PL/SQL: Statement ignored
5523/35 PLS-00201: identifier 'EM_JOB_SCHEDULER.GET_SCHEDULE' must be
declared
View created.
Comment created.
Comment created.
Grant succeeded.
DECLARE
ERROR at line 1:
ORA-20002: The diag kit has not been installed correctly
ORA-06512: at line 11

Changing my answer.
http://practicaloracle.blogspot.com/
See - EMDiag Installation
Note 421499.1: EMDIAG Repvfy Kit - Download, Install/De-Install and Upgrade
Note 1210814.1: EMDIAG AGTVFY Kit - Download and Install
Note 421586.1: EMDIAG Repvfy Kit - Environment Variables
Note 421600.1: EMDIAG Repvfy Kit - repvfy.cfg Configuration File

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Problem with install on new compy, something to do with external?

Hello, so I have been having a few problems with installing Arch on my new computer. On my old laptop I never ran into this problem on any distro of LINUX I installed, nor on any other of the systems I have installed Arch on. I believe it might have something to do with the fact that I am running the live cd off of an external dvd drive maybe? I am kind of stuck here, so any help would be greatly appreciated! Thanks!
If it helps
System Specs:
Motherboard: ASROCK 890FX Deluxe3
Processor: AMD Phenom II X4 955
Graphics Card: ATI Radeon HD 5700 Series
Hard Drives: 2 SATA 160gb hd RAID 0, and one 160gb ATA hd
OS: Windows 7 Professional on the RAID 0, hoping to put ARCH on the ATA (I have tried booting the ATA first in the list behind the USB DVDROM to no avail)
External Drive: Sony DVD/CD RW drive DRX-510UL
External DVDROM is the exact same drive I used to install windows 7 professional.
External DVDROM is plugged into one of my USB 2.0 ports, but the error still persists.
I am using the EXACT same disk I used when installing it on my past computer.
Trying to install x86_64 version of Arch, gets past the splash.
Output that I could catch:
:: Running Hook [archiso]
:: Rinning Hook [archiso_pxe_nbd]
:: Mounting tmpfs, size 75%... done.
:: Waiting for boot device...
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201005 ...
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : new full speed USB device using ohci_hcd and address 3
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : device descriptor read/64, error-62
usb 9-1 : new full speed USB device using ohci_hcd and address 4
usb 9-1: device not accepting address 4, error -62
usb 9-1 : new full speed USB device using ohci_hcd and address 5
usb 9-1: device not accepting address 5, error -62
hub 9-0:1.0: unable to enumerate USB device on port 1
scsi 6:0:0:0: CDROM SONY DVDRW DRU-510A 1.0d PQ: 0 ANSI: 0
scsi 6:0:0:0: Attached scsi generic sg3 type 5
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
ERROR: boot device didn't show up after 30 seconds...
Falling back to interactive prompt
You can try to fix the problem manually, log out when you are finished
/bin/sh: can't access tty; job control turned off
If you need any other info, I can grab it of course.
Last edited by crusniknano (2010-07-12 19:49:13)

K, got it running. was having errors with the USB hd, but just changed the name it booted from to the name of the drive. thanks!

Some problem to install BIEE11g

hello everyone,
I have installed BIEE11g three time, in each process, I will meet a mistake, that is 'ASInstance install error'. then I lookup the log file, it writes 'ASInstance error, Error in starting opmn server. operation aborted because of a system call failure or internal error'. to be honest, I couldnot solve this problem though i read the BIEE11g doc.
if i choose to skip the error and continue to install, i could not to visit the http://localhost:7001/analytics and could not succee to run startall in opmn.
so, i do not know how to solve this problem, please help me!
notes: my os is win xp sp3 and database vision is 10.2.0.1.0 and rcu is 1.1.5.0, actually when i install oracle schemas by rcu, it emerges some mistake and i choose to continue it. is the vision not match?
thanks,
regards,
phoeny

Hi Guys
Let me share my experience.
That Adobe Extension Manager CS4 was not working correctly for me.
System: Win XP Pro SP2, Adobe CS4 Master Collection. Flex Builder 3, SDK 3.4.1, Flex Component Kit 1.1.2, Adobe Extension Manager 2.1.112
In folder
C:\Documents and Settings\{username}\Local Settings\Application Data\Adobe
I haven both
Flash CS4 (current)
and
Flash CS3 (left with few files after uninstalling of CS3)
Apparently Extension manager put FlexComponentBase.swc to Flash CS3 folder. So I Removed CS3 folder and tried again.
Then I've also using Russian language (for non Unicode characters) while my default (keyboard bindings) is English. So Extension manager installing to ru folder and as result I can not see "Convert to Flex Component" in commands of Flash CS4. Simple copy of FlexComponentBase.swc to en folder (Adobe\Flash CS4\en\Configuration\Components) did not help.
So I set default language (for non unicode characters) in Regional setting of Windows CP to English. Reboot Xp.
Install Flex Component Kit again.
Finally it went to correct folder: C:\Documents and Settings\{username}\Local Settings\Application Data\Adobe\Flash CS4\en\Configuration\Components\Flex
Flash CS 4 shows now 2 new options : Convert symbol to Flex container, Convert symbol to Flex Component.
Doc

Problem in installing J2se dev. kit 5.0 update 8

Similar Messages

Maybe you are looking for