Problem in installing JAVA WAS 6.4 (not sneak preview)

Hi,
Struck up at STEP-28 of 33 which is Configure SAP j2ee engine .
Error log says
CJS-20067 BatchXmlGenerator error.DIAGNOSIS: Error when
generating 'Batchconfig.xml' for the batchconfigtool.See output of logfile
c:\program files\saninst_instdir/batchXmlGen.log:'SAP J2EE Engine Batch Config Xml Generator.
Anybody faced similar situation ?
Regards,
Hemant

thanks Hernant.
Turned out to be the fact that the installer switched to user <SID>adm just before this step, and it didn't have enough power.  Added it to local admins and off we went again...
Andy

Similar Messages

  • Problems in installing the content in the ABAP Sneak Preview

    Hello All,
    Have installed the ABAP Sneak preview and have activated the BW on client 001.  Was also trying to import the content into the BW system.
    In the SAINT transaction code, the content package is recognised, but when i try loading this, this fails in the stage CHECK_REQUIREMENTS. Since i have never done this before, was wondering if i am missing out the configuration steps before importing any components or the content.
    Are there some steps to configure the transport organiser etc before importing any component or SP or the content into the system ?
    Thanks for all the responses,
    Best Regards,
    Dabre

    If you run the install in foreground you will get a lot more information.  In my case it was erroring because the transport system hadn't been configured yet.  Heading into STMS cleared the error for me.
    -d

  • Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP

    Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP. I am using the Design Studio 4.3.2 for building the O2A 2.1.0 PIP. Please let me know how to resolve this issue. Here I am enclosing the log file .

    We have basically the same issue when we try to create the interpreter using the embedded method..
    I was able to use the interpreter embedded in a java client as long as the weblogic jars were located in a weblogic install if I tried to use them from a maven repository no luck at all...
    All of this worked easily in 9.2 now in 10.3 it seems more error prone and less documented.
    I have seen close to a 100 posts on issues related to this so is there a document which outlines specifics....
    We / I have used weblogic now for almost 10 years and moving from 8.1 to 9.2 was painful and we expected the move from 9.2 to 10.3 not to be soo bad but its proving to be as painful if not more painful than moving to 9.2. We seem to spend a good bit of our time working around issues in the next new release that were not in the previous one..
    Any help would be appreciated I think we will open a support case but even that is more painful...
    Any help would be greatly appreciated..
    PS: We confirmed that all jars in the startweblogic classpath were in the startup. The server we have the embedded wlst instance is a managed server and we are using the component in a war... Are there any restrictions which we are unaware of.
    Error we get is
    1 [ERROR] com.tfn.autex.order.weblogic.QueueMaintenanceUtility.addQueue():217 Error Adding Queue wowsers JNDI Name wowsers Exception: Invocation Target exception while getting the WLSTOffLineScript path

  • Hi, i have problem when installing itune. it said:  Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel. please help me!

    hi,
    i have problem when installing itune. it said: 
    Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
    Please help me i can't do anything without itune

    For "Could not open key/write value" errors when reinstalling try b noir's user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
    [LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
    The technique can be applied to the branch of the registry mentioned in the error message.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I have problem with installing Java Runtime Enviroment. It does not install it properly in Windows 7

    I'm asking for installing Java Runtime Enviroment. I install, but it does not work. I'm asked to install it evry time I am using Panasonic web camera with microfone and speaker program?

    I'm going to answer my own question in hopes it helps someone else. I had the problem immediately after I had installed PS CC.  Once I restarted the computer and tried again, it worked.  

  • Problem while installing java system application server 8.2

    Hi
    i am trying to install Java System Access Manager 8.2 on LINUX and during this process i am getting the below error.
    Valid DNS Domain Name is required.
    The DNS Domain name provided could not be validated.
    The server being installed require a valid internet name.
    Installation cannot proceed until a valid DNS Domain Name is provided.
    The above arror is at COMMON SERVER SETTINGS window.
    help me out.
    varun

    Hi,
    This is a problem with your DNS settings (or lack of), not with Sun Java System Application Server/Access Manager.
    You will need to setup DNS before installing.
    One of these articles may help you:
    http://www.aboutdebian.com/dns.htm
    http://www.troubleshooters.com/linux/dns.htm
    http://www.linux.org/docs/ldp/howto/DNS-HOWTO.html
    Hope this helps....

  • Problem with installing Java EE with JDK Bundle

    Hello everyone
    I downloaded the Java EE SDK with JDK update 25 bundle for linux
    The file end in .sh. however when I run the executable I get the no jar found message. Do I need to install jdk before I install jee and if I do then why do they provide them bundled if you have to have the jdk first before installing jee.
    Another question also, how do I change my handle in this forum? I didn't pick this number!!

    Yes, it is a bit stupid. You need the jar command which usually is available if you have a JDK installed but there are other ways of just installing just jar. Also note that some people already have an older JDK installed, thus jar is available and when they install this bundle they get a newer JDK.
    Anyway, for changing your handle, you can do that from 'Your Control Panel' and then Edit your profile.

  • Note: Sneak Preview Java SP15 temp. removed

    Hi community,
    I removed NW Sneak Preview Java SP15 temporarely because of a bug. It contained next to SP15 WebAS, SP14 components (EP) as well, which led to confusion which I didnt expect. So i will replace it as soon as possible (1 week) with SP16 full java stack (without XI).
    Sorry for the inconvinience,
    Oliver

    Has there been any update yet?  Been a week.

  • Guide me how do download the Java Edition of the Netweaver Sneak preview

    Can Some one please guide me how do I download the Java edition , I have Core FTP installed, On doing a save target as it asks me whehther to use Core FTP for file transfer, on choosing yes it a status window which says connecting,with source and destination values and then gives a message NW04SneakPrevJavaSP11.part1.rar-File not found....
    and thereafter the File Download Dialog still remains trying to find for the source location.....
    Some Kindly guide me the right way to do it

    Hi Paras,
    I just tried to download, no problem. I click on <i>Downloads -> Web AS -> New! Sneak Preview -> Download file 1</i> and get a popup where to save the file.
    Please try again with the given path.
    By the way, it should be enough to post your problem once
    Hope that helps!
    Best regards
    Renald

  • Error during Installing SAP Netweaver 7.0 SR3 Sneak Preview

    Hi All,
    I am trying to install the SAP Sneak Preview currently available in the SDN.
    There are 40 steps involved in the process and i am able to get through 39 steps successfully.
    On the 40th step, (Install minimal configuration), it tries to start the J2E instance.
    This fails. The SDM and dispatcher load sucessfully, however the Server 0 fails to load giving -2 exitcode and below is the developer trace.
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    [Thr 3196] JLaunchIAbortJava: abort hook is called
    [Thr 3196] **********************************************************************
    ERROR => The Java VM aborted unexpectedly.
    Please see SAP Note 943602 , section 'Java VM crashes'
    for additional information and trouble shooting.
    [Thr 3196] JLaunchCloseProgram: good bye (exitcode = -2)
    I have tried varying the -Xms and -Xmx properties, but still fails.
    Could you please help me fix the same.
    Regards,
    Tanveer.

    Hello Tanveer.
    Please mark this thread as aswered.
    And If u found my reply useful then please reward points.
    Cheers
    Shailesh Mamidwar

  • Java Add-in for ABAP Sneak preview

    Hi Experts,
    Would it be possible to install the Java Add-in for the ABAP Sneak preview?
    Cheers,
    James

    hello,
    my system is:
    OS Windows 2003 server R2
    DB MaxDB
    SAP ECC 6.0
    the log file (java.exe.log) show:
    ConfigMainExt state200
    TYPE=A
    STATE=
    INFO_SHORT=java.lang.NullPointerException: java.lang.NullPointerException
    at com.sap.ctc.util.UserConfig.addUserToGroup(UserConfig.java:266)
    at com.sap.ctc.util.UserConfig.performFunction(UserConfig.java:71)
    at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:74)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    CONFIGURATION=
    Thanks,
    Hernando
    Edited by: Hernando Polanía C on Aug 5, 2011 4:14 PM

  • Problem with Web Dynpro Theme in 2004s ABAP Sneak Preview

    Hi !
    Working on the Web Dynpro for ABAP 2004s Sneak Preview
    I encountered a problem in applying a web Dynpro theme
    via the URL-parameter sap-cssurl.
    I tried the following URL:
    http://hostname:8000/sap/bc/webdynpro/sap/webdynproapp?sap-cssurl=http://hostname:8000/sap/public/bc/ur/nw5/themes/sap_hcb
    But it didn't work ?!
    Could anybody tell me what went wrong ?
    Thanks in advance,
    Frank

    Hi Frank,
    Try this
    1. Set all dynpro's to run with portal theme whether you run them inside/outside portal.
    For this, run visual administrator -> server -> configuration adapter -> (change mode) -> webdynpro -> sap.com -> tcwddispwda -> Propertysheet.default
    set the parameter sap.theme.default to your portal theme path: we've theme CustomerTheme (portal is nw04sr1 sp14) and theme url is as follow:
    /irj/portalapps/com.sap.portaldesign.urdesigndata/themes/portal/CustomerTheme
    2. call individual application with parameter to use portal theme as follow:
    http://<portal hostname with domain>:<port>/webdynpro/dispatcher/local/WD_Project/Applname?sap-cssurl=http://<portal hostname with domain>:<port>/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/CompanyTheme
    Hope it helps...
    Lokesh

  • Is a license key needed for SAP WAS 6.40 sp16  sneak preview edition

    Hello Guys,
    I have a basic question regarding license key. Do I have to request a license from http://service.sap.com/licensekey from sap for the sneak preview evaluation edition?
    I think it is nowhere mentioned in the downloads page for the WAS 6.40 J2EE Edition.
    But I was reading in couple of other posts that the system runs for only 30 mins after the first installation somthing like that. I am confused.
    Please clarify.
    Thanks

    Hello,
    read this <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bb493f34-0801-0010-a3bc-ce2821492490">PDF</a> and if your system is named NSP then you can go to <a href="http://www.sap.com/platform/netweaver/minisap.epx">Licensing Procedure for the Mini SAP System</a> and get there a fresh license.
    Hope that helps,
    Michael

  • Problem downloading/installing Java Release 2 on 10.4.3

    I am new to posting in Discussions so I hope that this is not a redundant post.
    I recently upgraded from 10.2.8 to 10.4.3 using the install disk. Initially I had problems with Safari freezing on startup but solved that by reinstalling Tiger, but that left me with roaming icons especially the startup disk icon. Most everything else worked fine at that point so I ran software update hoping to solve the remaining issues.
    I was able to download the security patch but 'java 131and142 Release 2' seems to download but not install then I am informed that the same download is available for download and I should download and install it.
    I have run Norton Disk Doctor and Onyx and solved the roaming icon problem and everything else at this point seems to be in order. I am growing very frustrated as I have a dial up connection and it is a 45MB download.
    BTW - I was hoping to get around the problem and downloaded Release 3, which is also a large package, but was told that I needed all earlier upgrades to Java to install it.
    Any help would be greatly appreciated
    thx,
    d
    dual 867 MHz G4 PowerPC   Mac OS X (10.4.3)   1MB L3 Cache 1.5 GB DDR SDRAM

    d,
    Have you uninstalled Norton? You must ensure that there are no vestiges remaining on your system. From what I have read about the pervasiveness of NUM, I would not be very optimistic that it has not damaged your installation.
    Before you are able to resolve your current anomalies, you must in my opinion verify that you have completely removed Norton from your system.
    Uninstall Norton
    Norton Complete Uninstall
    ;~)

  • Problem after installing 6.03 iTunes- Will not start up...please help!!!!!

    I recently gave into the decision of installing the new iTunes update to 6.03 Everything was working fine, but I thought I should upgrade. Now I cannot start iTunes. When I click on the icon it shows an hourglass for about 2 seconds and then goes away. Ive tried reinstalling, but to no avail. If anybody knows what to do it'd be GREATLY appreciated. Thanks for all of your support! J

    I am also having a problem opening iTunes after installing the latest version, 6.03. Every now and then, it will open after I do some troubleshooting, but the problem persists the next time I try to open it. Once I opened iTunes in safe mode and then restarted in the normal mode and iTunes started properly. Another time, I took off the iTunes Help application from my start up items under my account and I was able to open iTunes. Another time, I opened iTunes from the actual data file and I was able to open iTunes. But as soon as I close iTunes and try to open it up again the next time around, it does not respond. What is going on? How can I get rid of 6.03 and go back to the previous version without losing my music?

Maybe you are looking for