Problem in installing MIDlet in the phone
Problem in installing MIDlet in the phone
The program cannot be installed in the phone,
When I double-clicked the JAD file in "bin" folder, there's an error message:
com.sun.kvem.midletsuite.InvalidJadException: Reason = 36
Error in opening jar file: HomeX1.jar
Anybody can help me?
{color:red}CROSS POSTED{color}
[http://forum.java.sun.com/thread.jspa?threadID=5302738]
Cross posting is rude.
db
Similar Messages
-
started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?
Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues -
my phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup
Well, it appears that your backup is corrupt, thus causing your issue. So, you'll have to restore as a new device, & not from backup. Follow this by syncing your content back to your phone:
http://support.apple.com/kb/ht1414
Do not restore from backup. -
I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks
To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.
-
Facing problems with network due which the phone goes into hangs status
Facing problems with network due which the phone goes into hangs status. some one help me with switching between 2g and 3G network
Hi Mani Nair,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are talking about having issues with a 3G cellular data network, you may find the troubleshooting steps outlined in the following article helpful:
iPhone cellular data connection issues
Regards,
- Brenden -
I have two problems when install 9iR2 in the RH9.
Hi, everyone:
I have two problems when install 9iR2 in the RH9.
1. I am going to 9iR2 in RH9 that the default character set is Chinese, so how I should set the environment variable NLS_LANG?
2. When I set the default character set is English, after I run the "runInstaller", in the terminal will display some error messages:
Warning: cannot convert string "<key>Escape,_Key_Cancel" to type VirtualBinding
Warning: cannot convert string "<key>Home,_Key_Begin" to type VirtualBinding
Warning: cannot convert string "<key>F1,_Key_Help" to type VirtualBinding
Warning:cannot convert string "Shift<key>F10,_Key_Menu" to type VirtualBinding
Warning:cannot convert string "<key>F10,Shift_Key_Menu" to type VirtualBinding
Warning:cannot convert string "<key>KP_Enter,_Key_Execute" to type VirtualBinding
Warning:cannot convert string "<key>Return,Alt_Key_KP_Enter" to type VirtualBinding
How should I correct.
Thanks a lot!Problem #2 is not a problem. We have been able to somewhat install Oracle when those warnings appear. The client install works fine with those warning messages in the terminal window. NOTE: They are just warnings...
-
Problem with security code.
If you're referrning to the passcode, it's normal for you to have to reenter the code after updating. If you don't remember what you put in, you have to restore the phone as new, without using a backup.
-
My hard drive burned up and had to be replaced. When I tried to sync my IPhone after my computer repair, the phone says it's syncing and the icons spin, but nothing happens. In a few seconds a message appears saying it will sync the next time my computer is available. I have gone through the instructions and procedures for syncing four times and can not get the thing to sync. Apparently the phone hasn't synced in a long time. What do I do to sync my phone again?
jrmetzger,
iOS runs on iPads and iPhones; OS X runs on Macs.
Given your situation, I’d highly recommended that you purchase a SATA-to-USB adapter, so that you can test both your old disk and your new disk externally, since it might be that the problem is due to a faulty internal SATA cable rather than due to faulty disks. -
I don't usually have a problem syncing my ipone4 but today I am getting a message on my Mac saying my phone is in recovery mode. My iphone is frozen with an illustration of the connector and itunes.
Legitimate unlocking does not require the original carrier's SIM after restoring the phone. So maybe something went wrong, for which you should contact Orange. Or maybe you didn't do the unlocking through Orange.
-
My iPhone 5 frequently crackles and pops loudly during calls (while using speaker phone, as well as not using speaker phone.) After being inspected by techs at the Genius Bar, my phone has been replaced twice; thus, I am currently on my third iPhone 5. Incredibly, I am, yet again, experiencing the exact same issue. Short of getting my fourth iPhone, is anyone aware of a solution?
if it's the exact same issue, either it's a problem with your service or with your software if you're restoring from a backup each time. it's pretty darn near impossible for 3 phones to have the same exact hardware issue, so that's unlikely. is this an at&t iphone? if so, are you continuing to use the same sim card? if so, get a new one and try that out. if that's not the issue, restore the phone as new and make a few phone calls. if the issue's gone away, there's something wrong with your backup
-
Updating/Installing Apps on the phone...great way to corrupt!
Well documented that one bad download over the phone will hose it. No response from Apple?
Also.. If you find yourself starring at an update gone wrong because the icon states it is installing for over 30min.. The way I have found is to shut off the phone by holding down the top button down and sliding the power off on the screen.
Then power back on and login to the App Store. It should ask for your App Store login before you even see another screen. Enter login and wait. A screen will pop up again stating it could not finish. Click cancel and then hold the icon (or any) down until an 'X' appear above the troubled program. Delete!
That is what I had to do.. -
Installing software to the phone from a folder on ...
Hello,
I have a Nokia E61.
My boss has sat nav on his phone and has put the software/files for it on my memory card inside a folder.
After putting the memory card in my phone I go to Application Manager but the Sat Nav software is not listed. I suppose this is because the software is on the memory card and not yet installed onto the phone.
I have looked for an .exe or .sis file in the folder but I cannot find one.
My question is:
How do I get the software/files on my memory card installed on my phone?
PS. please keep it simple I am not up on all the lingo!I suppose that depends a bit on what/whose navigation software you have there; Wayfinder, Navicore, TomTom, Route 66, or something else by some other software provider.
Secondly, it is whether it is a version of the software that is compatible with the phone (the E61 is based on the "S60 3rd Edition" platform, and needs a version of the app designed/developed for S60 3rd Ed.).
Normally, the software developer would provide you with a .sis or in the case of S60 3rd Ed. a .sisx file that you install first, before the app appears in the phone menu.
If you have the proper .sis or .sisx file to install on the memory card, then you should be able to launch the installation using either the Application Manager or the File Manager programs on the phone. Note that on S60 3rd Ed. phones some folders/directories are protected, so you should not put the .sis/.sisx files for installation under /sys, /system or /private folders/directories (if you, e.g., used a memory card reader or "USB mass storage" mode to copy the installation file to the card). -
So can I bring the Phone in to get a new sim card readser repaired? And if yes would the one year warranty every ihpone have cover the repair, or will I have to pay. And if I have to pay, about how much money will it cost.
Contact the Apple store and ask them.
Officially Apple does not sell parts. -
How can I unock my phone when the touch screen is broke/frozen? I have a replacement phone coming tomorrow and need to back-up to itunes. The phone is a 5.
All help is most appreciated.If the device has been regularly backed up and synced with iTunes, simply connect it to the computer and do a backup via iTunes.
If it has not been backed up regularly (or never backed up) there is no way to force a backup without a functioning screen. -
I am having issues with my iphone 4 touch screen, I can't do anything with it. I even have a hard time sliding the bar accross to accept calls. Has anyone else experienced this? I only have the phone 2 months.
I've not experienced this. But I do appreciate your asking.
Did you want help with your technical issue? If so, why don't you ask. Also state what troubleshooting steps you've taken.
Maybe you are looking for
-
How can I add left join in the coding
I intend to dynamic add left jion in my java class. so I write the coding like below: incident_id = svc_yokyu_id(+) (Both of them have been selected in the select sentence.) However, when I run the app, it will throw a sql error.(ora-01416) then I co
-
Intall Solaris 8 on Toshiba Portege 3440CT fail
I want to install Solaris 8 intel on Toshiba Portege 3440CT. it has one USB floppy drive and one PCMCIA CD-ROM. When I use Solais 8 boot disk to boot the system. it just only show "SunOS..." on the top left hand conner and have no response. Should an
-
Issues in Workflow before/after Upgrade
Hi All, Our project is going to upgrade from 4.7 to 6.0. The customer has some concerns over the workflows. The concerns are: 1.What happens to all the open workflows? I mean all the workflows which are still active and running
-
My Verizon email shows on both my computer and my I phone. I want to do the same with my contacts and my calendar. How do I make that happen?
-
Where are the division, multiplication and subtractions on mac keyboard?
trying to do an microsoft excel tutorial on mac - where are the divide, subtract and multiply figures on the keyboard?