Problem in installing NSU's new version

while installing the new version of nokia software updater i'm getting a error.during the end of the installation the msg comes
Error 1935.An error occured during the installation of
asembly component.
{303994BA-6487-47AE-AF1D-7AF6088EEBDB}.
HRESULT:0*80070002.
plz help me.

can someone plzzz help me?????????

Similar Messages

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
http://support.apple.com/kb/HT1212

My itunes wont work because it says it was installed by a newer version

My iTunes just won't load. All it says is that it cannot work because it was installed by a newer version.

We need more background on your iTunes setup. This ususally happens when yu have used your library with a newer version of iTunes such as using another person's computer.

Cannot install program because newer version already exists?

Hello,
I'm trying to install fontographer but it says it cannot install on this disk because a newer version of the program is already installed.
I find this quite strange because I've completely removed every single file of the other version, but still it says it's installed.
Anyone knows how I can solve thi problem?
Many thanks to anyone who is willing to help me.
Greetz,
Finn.

Use the developers method to completely uninstall the newer version of the program.
Sometimes a program will leave it's preference files because you might be uninstalling and reinstalling the same version to fix a software issue. The older version see's the newer version preference files and gives the errors.
Use the free Easy Find and find the programs file(s) and/or just remove them from your ~/Library/Preferences folder by Finder > Go to Folder > /Library/Preferences
There may be files in other locations as well. Perhaps it's best to ask the developer where all the files are for completel removal.
http://www.macupdate.com/app/mac/11076/easyfind

Installing ODBC requires newer version of the Univeral Installer

Hi, I need to install a newer ODBC driver for 3rd part software to connect to our new UTF-8 version of the database. I downloaded the version of ODBC I need, but when I try to install it I get an error saying I need a newer version of the Universal Installer. I've looked all over the site and cant' find a place I can just download a new version of the OUI. Any suggestions?

What version of the Oracle client are you using and what version of the Oracle ODBC driver are you trying to use?
I expect that the problem you're having is that Oracle changed the way that ODBC driver updates are packaged a couple years ago. Rather than being separate downloads, they included the ODBC driver updates in the Oracle client patchsets you can download from Metalink. That simplified life in that organizations that apply the full client patchset didn't have to separately install the ODBC driver updates. It complicated life in that if a client patchset updates the version of the OUI that is installed, the stand-alone install you can download from OTN requires the patched OUI which you only get by installing the client patchset from Metalink or getting a later version of Oracle that happens to include the later version of the OUI. Assuming your organization has a valid support contract, getting the client patchset from Metalink is most likely the way to go.
Justin

Problem with Mappings in the new Version of NWDS

Hello all,
i have a process which created in the NWDS (Version: SAP Enhancement Package 1 for SAP NetWeaver 7.1 SP00 PAT0000) checked in the CVS.
Now i have the process checked out of the CVS in the new Version of NWDS (Version: SAP Enhancement Package 1 for SAP NetWeaver Developer Studio 7.1 SP01 PAT0003).
The process contains a automated activity and on the output mapping from the webservice is now n error. The Error: "Expected 'com.sap.dictionary.string,ns=.... Found list of 'char10,ns=..." I´ve changed nothing and the input mapping and the other mappings are all right. I checked out again the same process in the "old" Version of NWDS and it works fine.
Knows somebody how i can "import" n process from an older Version of NWDS into the new Version?
Kind regards,
Bastian

Hi Bastian,
The problem you are facing is a trivial problem. You need not worry about the importing the whole development component again. Rather your mapping error can be removed by changing the context in webdynpro perspective easily.
Your error is telling that the automated activity requires a string paramenter and what it has found is a list of parameters.
What this means is in the Webdynpro context, the mapping which you have done has problems.
The webservice input requires a singleton parameter. If you look into the mapping view, you will notice a single icon for the node which you are mapping.
And what you are sending is a list (not a singletion node)
If you see from the left side from where the parameters is coming in you will notice multiple icons (stack on top of each other) representing non singleton nodes ie cardinatlity is 0...n or 1..n)
So to remove the problem just go to component controller of the view and change the context setting
Colletion cardinality of 0..1 or 1..1 and selection cardinality to 0..1 or 1..1 of the node.
Thnks

When I try to install 3.6.18 I get a message that the installation failed because an other copy of Firefox was running. But this is not the case. How may I install the downloaded new version?

I have tried to install this new version several times, but each time I got the same message. I have no other program running on the PC when I perform this installation. My present version is 3.6.16.
Best regards
Tor Blaasmo

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Since installing the last new version 4.1 When I am on a webpage it doesn't show the UEL in the address box

Since installing the new version of firefox 4/1 - the URL of the website I am viewing does not appear. If I type the URL in and go to another side the one I typed in stays and the new page I am viewing shows that URL

Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
Sorry I have only a german version , so don't know what your menu will show.

Cannot install office 2008, newer version message but no version installed!

I just bought this macbook pro used in addition to my macbook pro already owned. I try to install office 2008 that i still have one product key available. But the office wont install because of the newer version message, the thng is THERE IS NO OTHER VERSION OF OFFICE!
One more thing, i istall it using disk shaing with my mcbook pro 13 since this MPB 15 has a not working superdrive

try copying that install files in a usb thumb drive and install from there - the installer might be looking at your other macbook that has office already installed when you run the installer via disk sharing...

I am having a problem trying to get the new version of itunes to download correctly to my laptop. I have updated my ipad to the new ios 7, and windows is showing that it has been downloaded but when I connect my ipad, it is saying I have to download itune

I really need HELP!!! I have a laptop that runs with windows vista, and I have been having issues trying to get it to download the new version of itunes that would be compatible to the new version of ios 7 that I have already updated on my ipad. I have downloaded this three times, it shows that the download is complete, but when I connect my ipad to my laptop it is still telling me that I have to download the new version again and it will not sync with my ipad until I do. Does anyone else have this issue and can anyone help me figure out how to correct it? I would be most grateful!!

sign out from the creative cloud and then sign back in
Sign in, Sign out | Creative Cloud desktop app

I had a problem in installing creative cloud trial version

Problem in installing trial version

Prajutanu in what way are you facing difficulties? Do you receive any specific error message?

Problem with server to download new version of ovi...

I, C7 updated, Ovi 3.1.0.91 xp sp3.
Tried with 2 different pc same problem it's says "Not possible to connect to the updating service" Is nokia experiencing problem on updating server? Are two days i'm trying but it doesn't work.
And also is not possible to login with nokia account. Seems to be a server problem.
My internet connection is working properly.

Hi,
There is a new Ovi Suite version 3.1.1.78 available (www.ovi.com). Could please download, install it, and retry?
It should be also available in Ovi Suite updates function...

Problems with installing OS on new HDD.

Hi Everyone,
I have been reading around the forums to see if I could find an answer to my problem. But I have only found bits and pieces and I would like a confirmed answer if possible.
I am new to the Apple world and I have very little experience in Apple software and so my apologies for any mistakes or my lack of knowledge.
I have been given a PowerBook G4 1.5 GHz with a faulty HDD and a collection of CD’s / DVD’s. I have just replaced the HDD with a 320GB WD Scorpio Blue WD3200BEVE and now I am trying to install the OS on the PB G4. This HDD is not formatted and is fresh from the supplier.
The discs I have been given:
Apple Hardware Test: SW Version 1.2.2 (PowerBook G4)
PowerBook G4 - Mac OS 9 Install: 9.2.2
PowerBook G4 - Mac OS X Install: 10.1.4
PowerBook G4 - Applications: 1.1
PowerBook G4 - Software Restore 1,2 & 3: Mac OS Version: 10.1.4, 9.2.2
Airport Express: 4.0
I have tried the OS 9 & X Disc whilst pressing C on boot and the PB only displays a icon with a face / ?.
I have also tried booting up with the option key and I only have a sceen with 2 buttons a circular arrow and a (->).
The only disc I could get to show up on this screen was the AHT disc and this would only display an error such as not compatible with hardware / system.
Could someone please explain to me if I am doing something wrong or if you can see any other problems.
Many thanks,
Dan
Message was edited by: DanDubi

Hi,
Wow never heard of this problem before... Ok, do you hear any clicking noises in this hard drive? First of all, is the HDD new? If no, I suspect it might be faulty.. if its new, there could be some kind of firmware issue preventing it from being used on the mac..
Another test I would do.. try loading Tiger's cd and see if you can format the drive from there.. AH WAIT A MINUTE... How old is your G4 Powerbook? By the way I see it your powerbook might have a drive limitation of 128GB and lower.. thats most likely the issue. I noticed your install disks have 10.1.4 - THIS IS PUMA and I believe your powerbook precedes those powerbooks which have large drive support.. In this case, you will need intech's hi-cap tool in order to format and use the drive.
Powermac G4's and powerbooks before I think 2003 don't support large drive 48-bit LBA, so this could be the problem. Do you have the original hard drive which came with that? Use that as a test to prove my theory.. if the start up menu sees the drive, then the problem is that your G4 powerbook does NOT support large drive capacities greater than 128GB.
In order for you to use that drive, you WILL need Intech's hi-cap tool and I am not sure if they still make it.

I have an old ipod that i have not used in a very long time, ive had it on a charger now for over an hour and i still cnnot get my ipod to turn on, how can i fix my problem, i just downloaded the new version of itunes aswell, so i know its not my itunes.

i have an old ipod touch that i have not used in a very long time, and im having trouble gettign it to turn on. ive had it on a charger for over an hour now and still nothing hs changed. i just updated my itunes to the current version they haev so i know its not an itunes problem its rather a problem with the old ipod touch itself. im leaving for deployment soon and im trying to get this fixed without having to send it in. If anyone has any ideas on how to get this thing turned on it would be greatly appreciated.

Well, two thoughts.
The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
The battery has deep discharged and is now dead. It will never recharge and should be replaced.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
The flat fee for a battery exchange is, I believe, $99.00 USD.

ITunes 10.6 will not install, says a newer version exists.. i have 10.3

I have Windows Vista and iTunes has always installed quickly and easily
i just bought an iPad3 and i need to update the iTunes software 10.3.1.55 and i am trying to install the newest version 10.6.3.25 x64 and it goes through the whole install process and says "A later version of apple software update is already installed on this computer"
How can i go about force installing 10.6.3.25...
Thank you for any help in advancew

Go to Control Panel and uninstall Apple Software Update. Then, install iTunes

Problem in installing NSU's new version

Similar Messages

Maybe you are looking for