Problem in installing oracle 10g dev suit
Hi all
my name is farnaw, i have successfully installed oracle 102 R2 on linux enterprise 4 seccuessfully, know i want to instal oracle 10g developer suit latest version (10.1.2.0.2)
acan any body help me how can i install dev suit, i need any link or steps to install this
Reply will be highly appreciated
With regards
Thnks in advance
farnaw
You can find all the Oracle documentation at http://docs.oracle.com
From there you can browse to the Developer Suite documentation, including the installation guide, at http://download.oracle.com/docs/cd/B25016_07//doc/dl/core.htm
Similar Messages
-
How to download Oracle 10g Dev.Suite Patch
Hi,
I need to download How to download: Oracle 10g Dev.Suite Patch for WindowsXP SP3 32-bit for Developer Suite 10g.
Direct link to the download would be appreciated.
With regards,
MOHAMMED AJAZ.Hi Sarah
I don't have access to metalink. i was trying to register but it's asking system identifier, which is i don't have. It's looks like for commercial use.
1. Can i register metalink for personal use? (this software i am using for practice.
thanks.
WITH REGARDS,
MOHAMMED AJAZ. -
Error while installing oracle 10g developer suite on windows xp
I am getting following error when i am trying to install the oracle 10g developer suite windows xp with sp3
+*"---------------------------*+
Oracle Universal Installer+
---------------------------+
Error in writing to directory c:\TEMP\OraInstall2010-03-18_12-57-52PM. Please ensure that this directory is writable and has atleast 55 MB of disk space. Installation cannot continue."+
Even i have enough space of my C drive plus i m the administrator on my PC. I changed the temp location as well and download the zip files(installation) again but it doesn't work. Kindly provide some solution for this error.Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202) This means you already have ISA configured as proxy server. Disable the proxy from the browser and you should be able to access the application. Or simply add the application URL to the list of the proxy exceptions.
-
PROBLEM IN INSTALLING ORACLE 10G ON WINDOWS 2003 SERVER(WIN2K3)
Hi to all,
I have successfully removed Oracle 9i from win2k3.Am unable to install oracle 10g on the same system.............. problem : Universal installer window stucks at 14%, no error......no resource utilization by installer(as viewed from task manager).
Please help i ve read the oracle installation documentation as well............Ok gotcha !!!!!!!!!!!!! its a CRC error given by java
dats y it stucked :(
am hereby uploading the error:
java.util.zip.ZipException: invalid entry CRC (expected 0xc9e96252 but got 0x5651c9f5)
at java.util.zip.ZipInputStream.readEnd(Unknown Source)
at java.util.zip.ZipInputStream.read(Unknown Source)
at java.io.FilterInputStream.read(Unknown Source)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)
CAN SOMEONE SUGGEST ME WHAT TO DO NOW ???????????plz reply
ANKUR SHARMA -
Problem on Installing Oracle 10g on Windows XP Professional
I'm getting the following error while I install Oracle 10g R1, on Windows XP Professional.
The Path enviroment variable is bigger than 1023 characters. This value cannont be set.
Has anyone seen this error before?Hi,
you have two option to start your oracle service. your problem is your oracle serivce is not start.
for that you can start manully....
like
on command prompt.
cmd>net start oracleservice<sid>
or
you can set automatic for oracle service.
go services window. start >>>> run >>>> services.msc <<<enter>>>
check and select oracle services and right click and set automatic..
every time your system is reboot then oracle service is automatically is start.
regards
Taj -
Problem to install oracle 10g on linux
Hi,
I want to install Oracle 10g on Linux
(I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux)
, when i run ./runInstaller, i have the following error , do you known what is the problem :
Démarrage d'Oracle Universal Installer...
Vérification des exigences du programme d'installation...
Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<
Fermeture d'Oracle Universal Installer ; le journal de cette session figure à l'emplacement /tmp/OraInstall2010-11-17_05-03-15PM/installActions2010-11-17_05-03-15PM.logHello,
Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<So, when the Installer checked the OS Release, it didn't find the correct one.
The message said that you should have one of this OS:
Redhat-3, SuSE-9, Redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2As previously posted, you should check from the Installation Guide that you have the right OS requirements before running the Installer.
Hope this help.
Best regards,
Jean-Valentin -
Display Problem while installing Oracle 10g on RHEL 5
All,
I'm in the process of installing Oracle 10g R2 on RHEL4, when i'm trying to issue ./runInstaller i'm getting the below error.
I could get the xclock on the host, even then i'm getting below display error, could any one please help me to resolve this ?
e@dhcppc6 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-18_02-21-10PM. Please wait ...[oracle@dhcppc6 database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
[oracle@dhcppc6 database]$export DISPLAY=<hostname>:0
Are you running from the same terminal or connecting remotely?
If connecting remotely, you need a Xserver running on the client machine. -
Problem when installing oracle 10g on RHEL-4
greetings,
i have been trying to install oracle 10g on my linux machine for the past 10 days, everytimje i do all the steps and change the kernel parameters but when i start the runinstaller file. i get the folloeing error.
I don't know what this error is or why is it happening
you can find a snapshot of the error on the following link
http://www.4shared.com/dir/4180305/6152dc22/Oracle_errors.html
also another error is arising when i log in to the linux box with the user oracle... i have been having these errors for the past 10 days and i reached to the point where my knowledge won't help me more than ur experiences.
a snapshot of this error also is available in the above linkWhile I understand a picture is worth a thousand words, I backed off from the site as soon as it started providing active ads and spy-ware-like indications. If you want help (from me at least) please describe the symptoms.
You could also use the following sites to help with the install:
http://www.puschitz.com and http://ivan.kartik.sk -
Problem - Installing oracle 10G & Developer Suite
Dear Team
I am trying to install Developer Suite and Oracle 10g . but unable to get into Sql. always i am getting a error . where as i changed everything in tnsnames.ora and checked the Listner. In Oracle 9i i dont get the error and very somoothly i can install and configure it . here some times it gives a error as Account Locked etc.,
Please advice how to configure or where I am doing a mistake
SanjayFew more details about how you are connecting and which user you are using for connection would be helpful.
With Oracle 10g, assuming that you have created a sample database on the same machine with mostly DBCA...
here some times it gives a error as Account Locked etc.,if you are referring to ORA-28000 error, then it seems the password that you have been using is incorrect and you have exceeded the failed login attempts.
Or you need to unlock the user in first place, since that is locked by default during Oracle installation (assuming you are referring to the sample schemas). -
Problem with installing Oracle 10g on Suse Linux
Hi everybody!
I downloaded Oracle 10g Express from this url:
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
it is free version for developers.
I copied it into computer where was installed Suse Linux Enterprise Edition.
But when I run it shows this kind of error:
error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
What is the problem? Does anybody know answer?
Regards,
Seti's fictionYes, you appear to have a bad copy.
I have not had a problem when the check sum matched. Therefore I encourage you to download again. -
Please help me, a problem when install oracle 10g on the solaris 10
currently, I am installing the oracle 10g on the solaris 10, I am using DHCP and
my computer has no hostname, the following is copied from the 10g document,
When you run Oracle Universal Installer, an error may occur if name resolution is not set up. To avoid this error, before you begin installation, you must ensure that host names are resolved only through the /etc/hosts file.
To ensure that host names are resolved only through the /etc/hosts file:
1.
Verify that the /etc/hosts file is used for name resolution. You can do this by checking the hosts file entry in the nsswitch.conf file as follows:
# cat /etc/nsswitch.conf | grep hosts
The output of this command should contain an entry for files.
2.
Verify that the host name has been set by using the hostname command as follows:
# hostname
The output of this command should be similar to the following:
myhost.mycomputer.com
currently, when I use hostname command, it is unknown, what should I do to add
my hostname? thanksSince this is related to Solaris, you will most likely get a better/faster response on a Sun Solaris forum rather than here.
Srini -
Problems in Installing Oracle 10g,11g on same server
All,
I install oracle 10.2.0 on RHEL 4.7 and running successfully,
How i can Install more database 10.2.0 at same server, and what i have to changed in .bash_profile
what change i have to do for installing Oracle 11g on same server.
ThanksI am not being strict in my answer as it would might confuse.
Providing you did not use Oracle Express Edition ...
dbca should be able to create and sort out another database 10g for you.
Be careful not to run out of resources {eg use too much main memory}
You can switch between oracle databases in the same oracle home (which is what you will have) by 'export ORACLE_SID=SID2' where SID ... providing your bash_profile sets up the environment required for your first oracle database.
When putting new oracle home installations {eg an 11g installation} on a machine where there is an existing oracle home my rough rule of thumb is to unset variable that relate to existing oracle homes before dpoing install (possible exception of ORACLE_BASE).
eg:
oracle$ env
ORACLE_SID=SID2
ORACLE_HOME=/u01/app/oracle/prouct/10.2.0
ORA_NLS10=...
oracle$ unset ORACLE_SID
oracle$ unset ORACLE_HOME
oracle$ /stage/whatever/runInstallerI think the argument is begining to go against seting ORACLE_HOME and other home specific stuff etc in the .bash_profile.
Rgds - bigdelboy -
Problems with installing Oracle 10g on x86_64
Hi,
I downloaded 10201_database_linux_x86_64.cpio.gz package and tried to install by running runInstaller script.
But i received following error:
./runInstaller: line 54: /home/oracle/source/database/install/.oui: No such file or directory
But this files exists
bash-3.2$ pwd
/home/oracle/source/database/install
bash-3.2$ ls -la
total 364
drwxr-xr-x 5 oracle root 4096 2007-09-26 13:10 .
drwxr-xr-x 6 oracle root 4096 2007-09-26 13:06 ..
-rwxrwxrwx 1 oracle 42424 163185 2005-10-23 00:49 .oui
-rwxr-xr-x 1 oracle 42424 28 2005-10-23 00:49 addLangs.sh
-rwxr-xr-x 1 oracle 42424 76 2005-10-23 00:49 addNode.sh
drwxr-xr-x 2 oracle root 4096 2007-09-23 19:24 images
-rwxr-xr-x 1 oracle 42424 46448 2005-10-23 00:49 lsnodes
-rwxr-xr-x 1 oracle 42424 2268 2005-10-23 00:49 oneclick.properties
-rwxr-xr-x 1 oracle 42424 2387 2005-10-23 00:49 oraparam.ini
-rwxr-xr-x 1 oracle 42424 6428 2005-10-23 00:49 oraparamsilent.ini
drwxr-xr-x 2 oracle root 4096 2007-09-23 19:24 resource
drwxr-xr-x 2 oracle root 4096 2007-09-23 19:24 response
-rwxr-xr-x 1 oracle 42424 102612 2005-10-23 00:49 unzip
bash-3.2$ head -c 4 /home/oracle/source/database/install/.oui
ELFbash-3.2$
Am I installing oracle in a wrong way?
What could be the problem?
bbadtry using a download assistant like GetRight (www.getright.com) for downloading. it allows fast error free download. after that use nero/easy cd to burn the image and be sure to burn it at 8x speed and then dont forget to verify it.
-
Problem in installing Oracle 10g
Hi,
When i install Oracle 10.2.0.1 in linux i get the below error,
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/product/10.2.0/network/lib/ins_net_client.mk'.
Details of my server:
[oracle@mail ~]$ echo $ORACLE_HOME
/u01/app/oracle/product/10.2.0/db_1
[oracle@mail ~]$ uname -a
Linux mail.redhat.com 2.6.9-5.EL #1 Wed Jan 5 19:22:18 EST 2005 i686 i686 i386 GNU/Linux
[oracle@mail ~]$ tail -15 /u01/app/oracle/product/10.2.0/db_1/install/make.log
/u01/app/oracle/product/10.2.0/db_1/lib32//libnls10.a(lxecg2l.o)(.text+0x13f): In function `lxecg2l':
: undefined reference to `ldxnbeg'
/u01/app/oracle/product/10.2.0/db_1/lib32//libnls10.a(lxecg2l.o)(.text+0x16f): In function `lxecg2l':
: undefined reference to `ldxdtd'
/u01/app/oracle/product/10.2.0/db_1/lib32//libnls10.a(lxecg2l.o)(.text+0x48b): In function `lxecg2l':
: undefined reference to `ldxnbeg'
/u01/app/oracle/product/10.2.0/db_1/lib32//libnls10.a(lxecg2l.o)(.text+0x4b7): In function `lxecg2l':
: undefined reference to `ldxdfd'
/u01/app/oracle/product/10.2.0/db_1/lib32//libunls10.a(lxu4tstc.o)(.text+0x8b4): In function `lxu4TstClsXMLPubidChar0':
: undefined reference to `lxpTstClsXMLPubidCharTbl'
/u01/app/oracle/product/10.2.0/db_1/lib32//libunls10.a(lxu4dec.o)(.text+0x18b): In function `lxu4Decomposition':
: undefined reference to `lxujmd'
collect2: ld returned 1 exit status
make[1]: *** [u01/app/oracle/product/10.2.0/db_1/sysman/lib/e2eme] Error 1
make: *** [e2eme] Error 2
Can anyone help me out.Run following command
From RedHat AS3 Disk 2
cd <MOUNT_POINT>/RedHat/RPMS
rpm -Uvh openmotif-2*
rpm -Uvh setarch-1*
From RedHat AS3 Disk 3
cd /mnt/cdrom/RedHat/RPMS
rpm -Uvh compat-db-4*
rpm -Uvh compat-libstdc++-devel-7*
rpm -Uvh compat-gcc-7*
rpm -Uvh compat-libstdc++-7*
rpm -Uvh compat-gcc-c++-7*
rpm -Uvh libaio-0*
Check following link for more info
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b15660/toc.htm
Cheer,
Virag Sharma -
Problem in Installing Oracle 10g on FC3
when I started the oracle installer it end up like this
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8 or UnitedLinux-1.0
Passed
All installer requirements met.
You do not have sufficient permissions to access the inventory '/opt/oracle/oraInventory'. Installation cannot continue. Make sure that you have read/write permissions to the inventory directory and restart the installer.: Permission denied
Any ideas?
Thanks in advance
AjaiI tried to install 9i before I tried 10g, and in that process I switched the GCC3 compiler binary with GCC2 compiler binary as following:
su -
# cd /usr/bin
# mv ./gcc ./gcc3
# mv ./gcc296 ./gcc
Now I just gave it a shot by Switching back the GCC binaries as follows and it worked.
su -
# cd /usr/bin
# mv ./gcc ./gcc296
# mv ./gcc3 ./gcc
Now I finished installation, and it is working fine.
Thanks a lot Ivan.
Ajai.
Maybe you are looking for
-
How to change background color in preview mode?
After entering by chance presentation mode and had to quit indesign for exit (esc key doesn't work on my iMac), I found that the background color in preview mode is now black instead of grey. There is any way to change it?
-
Purchased video from itunes online store will play in itunes but not ipod
It seems like this issue comes up for a lot of people. When I try to play the tv show I purchased from the itunes store on my 30gb ipod I get a grey screen, then it goes back to the menu. I've tried all the usual fixes- resetting, restoring, getting
-
I need help with a print spooler error message
Out of the blue I lost my printer connection. When I look at my printer menu there is no printer listed. When I try to add or install a printer, I get some odd message about a printer spooler is not running. Restart the machine. I've tried unhook
-
Powerbook Start-Up issue: Disk 3 error
Hello When I try to start my PB, it says 'darwin/bsd powerbook" and then Log-in. I typed 'reboot' in the Log-in and it asked me for my password but when I enter the password it says 'incorrect' and then says 'disc 3 error' Help - can anyone help?? Th
-
3G to 4G is it or is it not coming to my zip code?
This weekend someone at VZW must have died and fell on the 4G switch because just for about 1 to 2 hours I had 4G. Is this by chance or am I getting 4G running in my area. Please advise.