Problem in Installing oracle 11g in enterprise linux

Hello all,
Iam new to linux and oracle .... I had downloaded enterprise linux from oraclewebsite, My question is i was not able to install oracle 11g in enterprise linux...
And when i am trying to install ./runInstaller
iam getting error message (permission denied).
is that necessary to install oracle vm server or manager .. if so how to do it .. Please give me clear idea how and where to start..

The error message which iam getting is
[[email protected] database]# ls -la
total 48
drwxr-xr-x 8 root root 4096 Sep 10 15:42 .
drwxr-xr-x 3 root root 4096 Sep 10 15:40 ..
drwxr-xr-x 12 root root 4096 Sep 10 15:42 doc
drwxr-xr-x 4 root root 4096 Sep 10 15:42 install
drwxr-xr-x 2 root root 4096 Sep 10 15:42 response
drwxr-xr-x 2 root root 4096 Sep 10 15:42 rpm
-rwxrwxrwx 1 root root 4352 Aug 13 23:56 runInstaller
drwxr-xr-x 2 root root 4096 Sep 10 15:42 sshsetup
drwxr-xr-x 14 root root 4096 Sep 10 15:46 stage
-rw-r--r-- 1 root root 5400 Aug 17 12:25 welcome.html
[[email protected] database]# ./runInstaller
./runInstaller: line 137: /root/Desktop/linux_11gR2_database_1of2/database/install/.oui: Permission denied
The command
bash ./ didnt helped. again got the error of bash: ./ No such file or directory

Similar Messages

  • This problem appears while installing oracle 10g on enterprise linux

    Hi All,
    While installing oracle 10g on enterprise linux 5 this message apear:
    More Info:
    Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to countinue setup but the above error appears, also I tried this configuration on SuSE 10 I changed the SuSE-release to 9 and went good.

    The packeges are already installedIf you execute runInstaller again is the error message the same as before?
    If yes can you post output for this command?
    rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|grep -i 'libxp'

  • Problem when installing Oracle 11g R2 x64 on rhel 5.8 x86_64

    Hi All,
    I’m trying to install oracle 11g software only to upgrade my database from 10g to 11g and i install all required packages listed in installation prerequisites but the below error appeared
    error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
    $tail -15 $ORACLE_HOME/install/make.log
    /oradata/db/tech_st/11.2.0/sysman/lib/ warning: ignoring old commands for target `nmosudo' make -f /oradata/db/tech_st/11.2.0/sysman/lib/ relink_exe EXENAME=nmo make[1]: Entering directory `/oradata/db/tech_st/11.2.0/sysman/lib' /oradata/db/tech_st/11.2.0/sysman/lib/ warning: overriding commands for target `nmosudo' /oradata/db/tech_st/11.2.0/sysman/lib/ warning: ignoring old commands for target `nmosudo' gcc -o /oradata/db/tech_st/11.2.0/sysman/lib/nmo -L/oradata/db/tech_st/11.2.0/lib/ -L/oradata/db/tech_st/11.2.0/sysman/lib/ `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -lm `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm -L/oradata/db/tech_st/11.2.0/lib /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o /oradata/db/tech_st/11.2.0/sysman/lib/libnmo.a -lcrypt -ldl    `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm /bin/sh: cat: command not found /bin/sh: cat: command not found /bin/sh: cat: command not found /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o: In function `main': s0nmo.c:(.text+0x1b): undefined reference to `__intel_new_proc_init' make[1]: Leaving directory `/oradata/db/tech_st/11.2.0/sysman/lib' collect2: ld returned 1 exit status make[1]: *** [/oradata/db/tech_st/11.2.0/sysman/lib/nmo] Error 1 make: *** [nmo] Error 2 EBS :12.0.4
    Please help me in this issue. Thanks in advance

    Seems you are trying to Install 32-bit 11g R2 on Linux RHEL 5 (64-bit) server fails with relinking errors - 'Mkldflags ntcontab.o nnfgt.o'
    Please check following MOS Notes.
    Install/Clone 32-bit 11GR2 Client On Linux x86_64 Fails With Error In Invoking Target 'Mkldflags ntcontab.o nnfgt.o' Of Makefile (Doc ID 1473421.1)

  • Problem in installing Oracle 11g in home edtion of windows xp

    i m trying to install Oracle 11g in home edition of windows xp. it is trelling some files not found. plz help me.!!!!!!!!!

    Upgrade to XP Professional, Home Edition is not supported.

  • Problem with install oracle on OEL5.3 linux

    Have some strange problem with oracle enterpise linux 5.3 32 bit, during install Oracle 10gR2 got link errors,
    after founded what is problem with linking oracle executables:
    relink oracle
    /usr/bin/ld: cannot find -lskgxn2
    all depended rpms and parameters are set, looks like missing some library, but cannot recognise with one.
    Have somebody spoted souch error ?

    The zipfile on technet has a checksum:
    Oracle Database 11g Release 1 ( for Linux x86
     (1,844,527,800 bytes) (cksum - 1044354138)
    When the zipfile is downloaded, you can check the zipfile on linux with the cksum command, it should be exactly the same as listed on technet, otherwise the zipfile is corrupted.

  • Installing Oracle 10g on Enterprise Linux 4 Update 5 Media Pack for x86_64

    Hello everyone,
    I'm trying to determine whether the required rpm packages are installed on the new EL 4, and it seems after running the query using the # rpm -q there are packages missing.
    According to the install section from the Doc Library these packages must exist in Red Hat Enterprise Linux 4.0 for 10g to install successfully. My guess is, if RHEL 4 needs to have it, then Oracles Unbreakable should too... right?
    Has anyone had experience doing such an installation, and if so, what exactly is missing from Oracle's EL4 and where can I get it.

    Thanks Terry and Jason for your responses. I've come along on this install but ran into a little snag. Hope you two and other members can help. Here's my output from the xterm:
    [[email protected] database]# ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system versions: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /u01/tmp/OraInstall2007-05-22_10-52-09PM. Please wait ...
    The user is root. Oracle Universal Installer cannot continue installion if the user is root.
    : No such file or directory
    [[email protected] database]#
    I don't know what to do, and weren't able to run it as user_oracle. Could you make a recommendation on how to resolve this error? Also, will I also need to make any clean-up efforts before beginning a new install?
    Many thanks.

  • Installing Oracle 10g in Enterprise Linux 4

    Hi friends,
    I dont know how to install oracle 10g express edition in Enterprise linux 4.
    Am new to linux environment.
    And i have downloaded the rpm file from oracle website.
    Please help me...
    thanks in advance....

    Hi Sunil
    Please find the below link
    you can install by these steps.

  • Problem with installing Oracle 10g on Suse Linux

    Hi everybody!
    I downloaded Oracle 10g Express from this url:
    it is free version for developers.
    I copied it into computer where was installed Suse Linux Enterprise Edition.
    But when I run it shows this kind of error:
    error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
    error: oracle-xe-univ- cannot be installed
    It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
    What is the problem? Does anybody know answer?
    Seti's fiction

    Yes, you appear to have a bad copy.
    I have not had a problem when the check sum matched. Therefore I encourage you to download again.

  • Problem to Install Oraclce 11g on Linux

    HI I am Try to Install Oracle 11g on Enterprise linux 4.
    But The Following Problem Come.
    How can I configured to display at least 256 colors?
    How can I resolve it.
    Checking Temp space: must be greater than 80 MB. Actual 14041 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 2047 MB Passed
    Checking monitor: must be configured to display at least 256 colors
    >>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    Rechecking installer requirements....
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-08-19_10-42-07AM. Please wait ...[[email protected] database]$ Xlib: connection to ":0.0" refused by server
    Xlib: No protocol specified
    Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.access$000(
    at sun.awt.X11GraphicsEnvironment$ at Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(
    at java.awt.Window.init(
    at java.awt.Window.<init>(
    at java.awt.Frame.<init>(
    at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
    at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(
    at oracle.s
    Tamim Khan

    From ORA-12532: TNS:invalid argument it seems that you solved this problem.... isn't it ?

  • Oracle 11g On Suse Linux 9.1

    Hi all,
    I have downloaded both Oracle 11g and Oracle Application Server 10g Release 2 from Oracle Website. I am using Suse linux 9.1. I am having problems in installing Oracle 11g on it.
    Please somebody help me.
    Thanks in advance.

    You're using an unsupported Linux-distro... Check
    to see you need at least "SUSE Linux Enterprise Server 10.0".

  • Error While Installing -- Oracle 11g XE

    Hi all
    I had installed RHEL 4.. Actually i am installing oracle 11g XE in linux.. When installation completed successfully.. i can see that the oradata folder is empty and cant see any of the ".dbf " files installed during the process. The folder named "diag" is also not installed... i had uninstalled the rpm and installed twice..but the issue remains the same...

    874782 wrote:
    Hi all
    I had installed RHEL 4.. Actually i am installing oracle 11g XE in linux.. When installation completed successfully.. i can see that the oradata folder is empty and cant see any of the ".dbf " files installed during the process. The folder named "diag" is also not installed... i had uninstalled the rpm and installed twice..but the issue remains the same...really?
    I do not see that.
    How can we assist?
    Is COPY & PASTE broken for you?

  • Steps to Install Oracle 11g XE 64 on Linux 14

    Need steps to install Oracle 11g XE on fedora linux 14 on VM ware. I tried methods that are posted but oracle got installed but it is not working need some proper steps to install, I have done the installation on windows its but am new to linux. Please suggest me.
    Also please suggest me how to installe oracle 11g Enterprise edition on linux fedora 14.

    1. There are XE dedicate forum site:
    Forum Home » Database » Application Express which is XE dedicated forum site.
    2. Installation guide can be found at:

  • How to Install Oracle 11g on Linux for Power?

    I've installed RedHat Enterprise Linux 5.4 on IBM PowerPC server.
    Now I want to install Oracle 11g on it. But there are no Oracle 11g downloads for Linux for Power.
    Is there any workaround so Oracle 11g can be installed on Linux on Power?

    I think you can forget it. Oracle 10g R2 was the last version supported on Linux PowerPC.
    OCP 9i

  • Problem Installing Oracle 11g. Please Help!

    Hello All,
    I need to install Oracle 11g Release 2  database on my machine:
    Windows 7 Enterprise
    64 bit Operating System
    Service Pack 1
    I ran into problems right before  I reach the Installation Options Screen
    The error message is:
    Unable to establish a network connection to proxy server. Specify the correct proxy details.
    I have tried entering the correct Proxy server information but it gives me the same error.
    Please Help

    If you are not using proxy or if you want to continue without connecting to internet, you can just continue without providing these details

  • Problem Installing oracle 11g in Fedora 8

    I am trying to install oracle 11g in Fedore 8. The problem I am facing is that it is not starting the universal oracle installer. It is giving that DISPLAY is not set properly. I tried to do the following:
    DISPLAY=<machine-name>.0.0;export DISPLAY
    but it is not working.
    Can any one advise regarding installing 11g in linux.

    Details! What is the exact message, if any, that you get?

Maybe you are looking for

  • Javascript code needed for "Add to Favorites" icon in Webhelp using RH8

    Hi,   I have a huge problem in making the add to favorites icon click event associate with the appropriate code. This was the code i used in the Inline Javascript tab: <script type="text/javascript" language="JavaScript" src="showhide.js"></script> <

  • Calling stored procedure via java

    Hi all, i have a problem calling a stored procedure in my java code. I found an example at OTN which seems not to be correct. I know there had been a lot of posting regarding this isue but i did not find the solution. I had the following VB-code to t

  • What's the best duplicates finder application for Mac OS X?

    What's the best duplicates finder application for Mac OS X?

  • Bugs after upgrading to 10.6.2

    After upgrading to 10.6.2, I got a visual bell and lost the sound effects of Finder. Seems like the system always treat me as I checked Universal Access -> Hearing -> Flash screen when an alert sound occurs, which I actually didn't check (I never che

  • Namespace not found error when creating data server for xml with namespace

    Hi I tried creating XML data server in ODI with namespace in xml file. I followed the below steps but could not success in creating the dataserver. however when I remove the namespace in xml file I am able to reverse engineer the xml file. 1) Create