Problem in installing SAP best practises v1.600

Hi guys,
we have to install SAP best practises v1.600 in ECC 6.0 version. i down loaded SAP best practises v1.600 from www.service.sap.com But in that all building blocks are belongs to AUSTRALIA(with extention .AU) As i need to install with .US extension buldings bolcks. Is there any difference between these 2 types of buliding blocks.(.US &.AU)>
Can i install .AU files instead of .US files?
help me in thi regard ,
thank u

Hi,
this is not working. the files and installtion objects are different.
Please download the appropriate BP version from SAP Market Place.
Regards Ralf

Similar Messages

Problem in installing SAP best practises.

Hi,
We are trying to install SAP Best Practices Profeesional Sevrices (version1.500) But we are facing the problem of version incompatability as our SAP product is SAP ECC 6.0 the CD we received is (version 1.500).
ERROR IS: component SAP_ABA sys. rel(700) is different from from the required release(640).
Does SAP ECC 6.0 supports SAP Best Practices Profeesional Services (version1.500) or not ?
or we have to go with SAP Best Practices Profeesional Services (version1.600)?
if needed can we down load SAP Best Practices Profeesional Services (version1.600) freely from www.service.sap.com ? how to do it?
please help me in this regard.

The product you mention is to be utilized with the current version of SAP Solution Manager, which is based on SAP AS version 640 presently.
Best Regards,
Thanks for any points you choose to assign
Ron Silberstein
SAP

SAP Best Practises - Installation

Hello All,
I had installed SAP best Practises base line package SAP BP-ERP 617V6 in my system a couple of weeks back. But now when I am trying to activate the Best practises it is asking for the solution scope files and the installation text files. But when I am checking on Service market place , it seems SAP has with drawn the files for 617-V6 and has updated them with the latest files of 617-V7.
Now without these files I cannot proceed any further. And I have already activated the Business sets and Business Enterprise Functions in Client 000 and created a new client from 000.
In this regards can anyone advise what will be the best way forward. Can I upgrade my BP version BP-ERP 617-V7 now and proceed. Are there any special steps that I need to do for the BC sets which are already activated. I am guessing I will need to a client copy once again.
I also went through SAP Note 1301301 , Point IV , which talks about the upgrade of SAP BP package but it lacks clarity on the above points.
I have also raised a Customer message on this but will really appreciate your views in this regards.
Thanks
S

Hello Surajit Das,
In http://service.sap.com/swdc have you tried looking in Archive Area ?
SAP will generally hold the previous versions of software and components in the archive area for some time.
Regards,
Siddhesh

Experiences on SAP Best Practise packages?

We are considering applying a specific SAP Best Practise package on top of ECC6. It will be a new ECC6 installation.
I have read the BP faq pages http://help.sap.com/bp_bw370/html/faq.htm and read note 1225909 - How to apply SAP Best Practices - and the specific note and the specific installation guide for required Best Practise package.
I understand that applying a BP package is something not that easy but should speed up the implementation process.
If you have been participating in a project that implemented SAP Best Practises on ERP, would you please share your experiences with me.
Here are some topics for discussion:
(BP=SAP Best Practise package)
BP implementation could make constraints to your future EHP or SP upgrades, while BP is tightly linked to certain EHP and SP-level?
SAP support?
Installation process including config steps according BP installation guide is longer than usual, while there can be multiple activation and configuration steps done by others than basis consultants?
BPs are country dependent. What if your application is used multinationally?
What if you later find BP unneccessary?
generate difficulties in the beginning but did considerably speed up reaching the final goal compared to ECC6 without BP.
traps to fall in?
typical issues that basis staff has to notify when preparing/installing a ERP system to be with BP?
positive/negative things
I am not saying above statements are true or false. Just wanted to charge you giving comments.
Br: KimZi
Edited by: Kimmzini Siewoinenski on Aug 11, 2009 8:35 PM

Hi,
Make sure your web service URL correct in Live Office connection and also in Xcelsius data manager.
Did you check all connection in refresh button proprties? you may try selecting "Refresh after component are Loaded" in Refresh button properties Behavior tab.
I think Xcelsius refresh are serial refresh so it may be possible that first component refresh is still in progress but you are expecting other component to refresh.
Click on "Enable Load Cursor" in data manager's Usage tab, it will give you visibility of refresh. If anything refreshing you will see hour glass.
Cheers

Problem to install SAP R/3 4.6 on Windows server entreprise 2003

Hello all,
I've a problem to install SAP R/3 on a windows enterprise server 2003.
This is the step I made :
1) Install Windows enterprise server 2003
2) Add IPX and Netbios to the network (adress ip 192.168.10.2)
3) Add 192.168.10.2 srv1 SAPTRANHOST to the hosts file
4) Create User - C11adm; Assign administrator privileges
5) Start Update DLL's from Kernal CD.
6) Login as c11adm and Install Oracle 9.2 with the options :
File locations :
Source :
      Path : no change the path
Destination :
      Name : C1192
      Path : C:\oracle\C11\92
Available Products :
      Oracle9i Database 9.2.0.1.0
Installation type :
      Enterprise Edition
Database configuration :
      General Purpose
Oracle service for Microsoft Transaction server
      Port number : 2030
Database Identification :
      Global database name : srv1
      SID : srv1
Database File location :
      c:\oracle\oradata
Database charactere set :
      Use the default charactere set
7) Stop all oracle services
8) Install oracle 9.2.0.4.1 patch :
    OUI - V 2.2.0.18.0
    Oracle 9iR2 patch set 9.2.0.4.0
9) Install SAP R/3 disc 4.6D EXT Kernel
    INSTGUI options:
    Sap system name : C11
    Install Directory : C:\USERS\C11ADM\Install
    Sap Release to install : R/3 4.6C SR2
Error : CDINSTEXTRACTSAPMMCMSC_NT_IND InstallationDo 2342
Does somebody could help me ?
Regards.
4. Give all users access to ora_dba
5. Restart, login as c11adm and continue installation.

Hello Peter,
For the note 578004 Sap said :
            a) Copy the content of the respective Kernel CD to a local empty working directory.
                       For example, for a 4.6C SR2 system you use the 4.6C SR2 Kernel CD, for APO 3.0A you use the Kernel CD for APO 3.0A, etc.
But for myself, i don"t understand what they said because I Want to install 4.6c and they said "use the 4.6c SR2 Kernel CD" but where I can find this CD because I downloaded the files below :
50045631_1     Online Docu 4.6C Disc 1 HTML Help Windows 9x/NT German
50045631_2     Online Docu 4.6C Disc 2 Standard HTML German
50045631_3     Online Docu 4.6C Disc 1 English HTML Help for Windows 9x/NT
50045631_4     Online Docu 4.6C Disc 2 English Standard HTML
50046529     R/3 4.6C SR2 Installation Documentation
50056848_1     DVD 4.6C Online Documentation (3) 1 of 11
50056848_10     DVD 4.6C Online Documentation (3) 10 of 11
50056848_11     DVD 4.6C Online Documentation (3) 11 of 11
50056848_2     DVD 4.6C Online Documentation (3) 2 of 11
50056848_3     DVD 4.6C Online Documentation (3) 3 of 11
50056848_4     DVD 4.6C Online Documentation (3) 4 of 11
50056848_5     DVD 4.6C Online Documentation (3) 5 of 11
50056848_6     DVD 4.6C Online Documentation (3) 6 of 11
50056848_7     DVD 4.6C Online Documentation (3) 7 of 11
50056848_8     DVD 4.6C Online Documentation (3) 8 of 11
50056848_9     DVD 4.6C Online Documentation (3) 9 of 11
50078731_1     NW 2004s SR1 Presentation - Adobe LiveCycle Designer 7.0
50078731_2     NW 2004s SR1 Presentation - SAP Content Server 6.40
50078731_3     NW 2004s SR1 Presentation - MaxDB Release 7.6.00
50078731_4     NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 1/3
50078731_5     NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 2/3
50078731_6     NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 3/3
50078731_7     NW 2004s SR1 Presentation - Server Components Compilation 5
50081125     CD SAP License Keys & License Audit
51013953_1     R/3 4.6C SR 2 Export CD 1
51013953_2     R/3 4.6C SR 2 Export CD 2
51013953_3     R/3 4.6C SR 2 Export CD 3
51013953_4     R/3 4.6C SR 2 Export CD 4
51013954_1     R/3 4.6C SR 2 Language CD 1
51013954_2     R/3 4.6C SR 2 Language CD 2
51013954_3     R/3 4.6C SR 2 Language CD 3
51013955     R/3 4.6C SR 2 Language JA
51013957     CD 4.6C SR2 Language TH
51013998     R/3 4.6C SR 2 Language ZF
51018621     CD mySAP.com 4.6C Language Romanian
51019432     CD Oracle9i Database Onl. Docu. 9.2
51019883     CD 4.6D SAP Kernel ORACLE NT/IA64
51020564     CD 4.6D EXT Kernel ORACLE NT,AIX,HP-UX
51030122_1     Oracle 9.2 NT 1/3
51030122_2     Oracle 9.2 NT 2/3
51030122_3     Oracle 9.2 NT 3/3
51030122_4     Oracle 9.2.0.4.1 NT
51030122_5     Oracle Failsafe 3.3.2 NT/Intel
51030123_1     Oracle 9.2 NT/IA64 1/2
51030123_2     Oracle 9.2 NT/IA64 2/2
51030123_3     DVD ORACLE RDBMS 9.2 NT/IA64
51030123_4     DVD ORACLE RDBMS 9.2 NT/IA64
51030123_5     Oracle Failsafe 3.3.2 NT/IA64
51031095_1     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 1 von 12
51031095_10     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 10 von 12
51031095_11     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 11 von 12
51031095_12     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 12 von 12
51031095_2     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 2 von 12
51031095_3     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 3 von 12
51031095_4     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 4 von 12
51031095_5     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 5 von 12
51031095_6     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 6 von 12
51031095_7     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 7 von 12
51031095_8     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 8 von 12
51031095_9     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 9 von 12
51031592     CD SAP R/3 4.6C SR2 Language KO
51031593     CD SAP R/3 4.6C SR2 Language ZH
51031614_1     Oracle 9.2 Patch Set 7 AIX 64 64Bit
51031614_2     Oracle 9.2 Patch Set 7 Tru64 64Bit
51031614_3     Oracle 9.2 Patch Set 7 HP-UX PA-RISC 64Bit
51031614_4     Oracle 9.2 Patch Set 7 Linux I386 32Bit
51031614_5     Oracle 9.2 Patch Set 7 WIN I386 32Bit
51031614_6     Oracle 9.2 Patch Set 7 WIN IA64 64Bit
51031614_7     Oracle 9.2 Patch Set 7 Solaris 64Bit
51032345     Supp.Pack.Coll. 4.6C-47x200 2006/12
Regards.

Has anyone Installed SAP Best Practices for HCM

Has anyone installed SAP Best practices for HCM. I have to install the building blocks in the system. Can aynone guide me how to approach towards it?
Any kind of help is deeply appreciated
Regards,
Sanchit

Try this mate ,
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1060029
Cheers !!

Installing SAP Best Practices for HCM v2.60

Hi Gurus,
Has anyone installed SAP Best practices for HCM. I have to install the building blocks in the system. Can anyone guide me How to approach it? I have downloaded SAP BP v2.60 for HCM. How will I start transfering it to the client's SAP ECC 6.0 system. My Client needs Best Practices for HCM in their system.
Any kind of help is deeply appreciated. Please help.
Regards,
Sanchit

Hi Shaukat!
Please take a look at http://help.sap.com -> SAP Best Practices -> Cross-Industry Packages.
You can also try and take a look at http://service.sap.com/swdc -> Download -> Installations & Upgrades -> Entry by Application Group -> SAP Best Practices
Caution! You only can use the BP if this is suitable to your ERP version! Check if your HCM BP is for ERP2004. If so it will not work on an ERP2005 System.
I hope this helps!
Regards,
Zsolt

SAP BEST PRACTISE BI-Purchasing Volume Dashboard issue

Hello,
I am working on Purchasing Volume Dashboard (from SAP BEST PRACTISE BI package), I adapted Crystal Reports sources of this dashboard so that they connect to our local database and successfully generated the Export.xls, I Imported this Export.xls file into Purchasing Volume Dashboard.xls, added and configured Live Office Connections (ticking"Refresh before components are loaded" for each Live Connections.
The issue is that when I click on PREVIEW the four components (Charts and Scorecard) don't refresh simultaneously.
I have to click once on REFRESH button to have the first component refreshed with data then to click again to have the second component refreshed then click again and again !
I don't understand why those components don't refresh in the same time !!
Did one of you ever encountered this issue ?
many thanks for your help,
Regards
Christiane

Hi,
Make sure your web service URL correct in Live Office connection and also in Xcelsius data manager.
Did you check all connection in refresh button proprties? you may try selecting "Refresh after component are Loaded" in Refresh button properties Behavior tab.
I think Xcelsius refresh are serial refresh so it may be possible that first component refresh is still in progress but you are expecting other component to refresh.
Click on "Enable Load Cursor" in data manager's Usage tab, it will give you visibility of refresh. If anything refreshing you will see hour glass.
Cheers

Problem while installing SAP netweaver developer workplace

hi,
I hav a problem while installing SAP netweaver developer workplace .An error has occured while processing service ´developer workplace installation´.This error occured in phase 14 of 25 ie while unpacking SCS Client.error is as follows:-
[Cannot connect to host uklonki1 Connection refused: connect, -813.]
the database is online and the x-server is also started.hope anyone can help me in this problem.
with regards,
Jaisamma

Hi Michael,
I have tried that, but the result remains the same.
Manish

SAP Best Practises for Logistic Modules

Dear Reader,
Does anyone know how to find SAP Best Practises for Netweaver 2004s Logistic scenarios (SD, MM,)
The old Netwvr 2004 scenarioas are less helpful, especially in Inventory mgmt.
Thanks

Check this link, this is the latest I guess.
[SAP Best Practices|http://help.sap.com/bp_bw370/html/index.htm]
Cheers,
Neel.

Problem to install sap abap 7.01

At the beginning I tried to install SAP ABAP 7.02 (32 bits), It took almost all night, but the the end of installation i got a message than I had not enough memory (my PC is 2GB RAM!!). I couldn't find uninstall for 7.02 version because the installation wasn't completed. So I decided deleted all sap folders manually. Then, I decided to swap and go to old version - SAP ABAP 7.01 (because the System Requirements is low). During installation I got a message that I must to uninstall the last sap version.
How can I install without problem? Also I was using HD E:, and I could see there was SAP folders on C:. As I told I deleted C: folders manually and E: I format.
thanks lads

Dear Yuri,
I had the same problem with Netweaver 7.02. It seems there's a problem with the garbage collector in the Java installation, so after ABAP import, there's so much rubbish on the Java stack that installation can't finish. 2 GB should definitely be enough to finish installation. If you get an error message, just shut Windows down, and continue your old installation. The setup routine will prompt you to do so.
But now you've got another problem with the unfinished installation. Try the uninstall utility in the installation folder. If that's not enough, you'd have to remove all traces of SAP from the registry, and possibly delete some Windows services manually as well.
Best wishes,
Jan

Problem in installing SAP NetWeaver 7.0 Java sneak preview on windows xp sp

Hi
when I am trying to install SAP NetWeaver 7.0 Java sneak preview on windows xp sp2 I am getting the following problem 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Automatic LiveUpdate scheduler does not exist' after giving the jce file path and i can find the registry entry for the automatic live update scheduler .then what is wrong
Any inputs are welcome

Hello Bala,
Do you have Norton AntiVirus installed? If so then you may need to uninstall it and then proceed with installation. Simple stopping it will not work.
Regards,
Vishwas.

Problem while installing SAP Netweaver CE 7.1 SP3!

Hi,
I am installing SAP Netweaver CE 7.1 SP3 on Windows XP Pro. The installation
proceeds normally till Step 26 but at Step 26 while creating and startiong
SAPStartSrv an error is thrown that the Service can not be started in 40 seconds.
If I retry the installation it is terminated with some errors.
The service sapstartsrv can be seen in the task manager up and running.
Please reply ASAP.
I am providing here the error logs:
TRACE 2007-11-23 16:56:02.161
NWProfiles(CE1.SCS01)._getProfile(START) done
TRACE 2007-11-23 16:56:02.161
NWProfiles(CE1.SCS01).getStartProfile() done
TRACE 2007-11-23 16:56:02.161
NWInstance.getStartProfilePath(true)
TRACE 2007-11-23 16:56:02.161
NWInstance.getStartProfileName()
TRACE 2007-11-23 16:56:02.161
NWInstance.getStartProfileName() done: CE1_SCS01_AGRD50051628A
TRACE 2007-11-23 16:56:02.161
NWInstance.getDirProfile()
TRACE 2007-11-23 16:56:02.161
NW.getDirProfile(false)
TRACE 2007-11-23 16:56:02.161
NW.getDirProfile() done: C:/usr/sap/CE1/SYS/profile
TRACE 2007-11-23 16:56:02.161
NWInstance.getDirProfile() done: C:/usr/sap/CE1/SYS/profile
TRACE 2007-11-23 16:56:02.176
NWInstance.getStartProfilePath() done: C:/usr/sap/CE1/SYS/profile/CE1_SCS01_AGRD50051628A
TRACE 2007-11-23 16:56:02.176
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:02.176
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:02.207
NW.isUnicode(true)
TRACE 2007-11-23 16:56:02.207
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:02.207
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:02.207
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:02.207
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:02.254
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:02.254
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:02.317
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
TRACE 2007-11-23 16:56:02.317
NWInstanceInstall.createServiceWindows(): going to run <C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin> with input <-r -q -p C:\usr\sap\CE1\SYS\profile\CE1_SCS01_AGRD50051628A -s CE1 -n 01 -U "NT Authority\LocalService" -P "XXXXXX" -e SAP_ALL\I047488>
TRACE 2007-11-23 16:56:02.317
lognode: undefined, append: false
INFO 2007-11-23 16:56:02.348 [synxcpath.cpp:815]
 CSyPath::createFile() lib=syslib module=syslib
Creating file C:\ProgramFiles\sapinst_instdir\CE71_DEV_ADA\INSTALL\sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:264]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Going to call CreateProcess/CreateProcessAsUser for 'C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe' now.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:560]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Trying to start C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe using CreateProcess(NULL, <command line for executable C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
TRACE 2007-11-23 16:56:02.535 [synxcchapp.cpp:638]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 2480. Executable name: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe
INFO 2007-11-23 16:56:02.535
 CJSlibModule::writeInfo_impl()
Output of C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:45.170 [synxcpipe.cpp:195]
 CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)
 lib=syslib module=syslib
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2007-11-23 16:56:45.170
 CJSlibModule::writeWarning_impl()
Execution of the command "C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin" finished with return code -1. Output:
Service not started within 40 seconds.
TRACE 2007-11-23 16:56:45.170
NWInstance.getSAPLocExeDir()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles(): profiles object exists
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles() done
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getProfile()
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01)._getProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.170
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.186
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.186
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.186
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.186
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.201
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.217
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.217
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.232
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.232
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.232
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:45.326
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
WARNING[E] 2007-11-23 16:56:45.326
 CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:408]
 handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2007-11-23 16:56:45.326
Function setMessageIdOfExceptionMessage: osmod.applicationReturn
WARNING[E] 2007-11-23 16:56:45.326
 CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-11-23 16:56:45.357 [sixxcstepexecute.cpp:891]
FCO-00011 The step createService with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:761]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL. </body></html>
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:1257]
 CGuiEngineImp::acceptAnswerForBlockingRequest
waiting for an answer from gui
INFO 2007-11-23 17:15:43.180 [sixxcstepexecute.cpp:936]
An error occured and the user decided to retry the current step: "|CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService".
INFO 2007-11-23 17:15:43.196 [synxccuren.cpp:1016]
 CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL)
 lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
TRACE 2007-11-23 17:15:43.227 [syxxcfile.cpp:130]
 CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const
 lib=syslib module=syslib
Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2007-11-23 17:15:43.243 [syxxcnode.cpp:441]
 CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/stepLogMessages.1.xml, ISyNode::CopyMoveMode_t 0x3)
 lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/stepLogMessages.xml to C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/stepLogMessages.1.xml
TRACE 2007-11-23 17:15:43.243 [sixxcstepexecute.cpp:795]
Execution of preprocess block of |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService returns TRUE.
TRACE 2007-11-23 17:15:43.258
Instantiating new NWUsageTypeBasic
TRACE 2007-11-23 17:15:43.258
NWUsageTypeBasic() done
TRACE 2007-11-23 17:15:43.258
Call block:NW_Instance_ind_ind_ind_ind
 function:NW_Instance_ind_ind_ind_ind_SubComponentContainer_createService
is validator: false
TRACE 2007-11-23 17:15:43.274
NWInstance.byNumber(01, AGRD50051628A)
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall.find(
function (instance) {
 return instance.getNumber() == number && instance.getHostName().equals(host);
TRACE 2007-11-23 17:15:43.274
NWOption(collected).value()
TRACE 2007-11-23 17:15:43.274
NWOption(collected).value() done: true
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall._fromRow()
TRACE 2007-11-23 17:15:43.274
NWDialogInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWJavaInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWJavaInstanceInstall() done
TRACE 2007-11-23 17:15:43.274
NWDialogInstance()
TRACE 2007-11-23 17:15:43.274
NWJavaInstance()
TRACE 2007-11-23 17:15:43.274
NWInstance(CE1/J00/AGRD50051628A)
TRACE 2007-11-23 17:15:43.274
NWInstance(CE1/J00/AGRD50051628A) done
TRACE 2007-11-23 17:15:43.274
NWJavaInstance() done
TRACE 2007-11-23 17:15:43.274
NWDialogInstance() done
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall() done
TRACE 2007-11-23 17:15:43.274
NWDialogInstanceInstall() done
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall._fromRow() done
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall._fromRow()
TRACE 2007-11-23 17:15:43.274
NWSCSInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWSCSInstance()

Hi Michael,
I have tried that, but the result remains the same.
Manish

SAP best practise to use transportation component

Hi,
I need to know when should be the shipment created after delivery? When Shipment create for group of deliveries?
Indeed I would like to know the SAP best practices to use transportation component. Please forward if you have any related links which describe the SAP best practice to use transportation component.
Thanks,
Victor

Dear Victor,
The shipment document will be created after delivery creation but before Post Goods Issue(PGI).
When the deliveries belongs to the same route you can create shipment document for group of deliveries.
For more information go through this Help link it will help you,
http://help.sap.com/saphelp_47x200/helpdata/en/93/743c21546011d1a7020000e829fd11/frameset.htm
I hope this will help you,
Regards,
Murali.

What is the SAP best practise

we are planning for new co.code, does it suggestable of using existing document types for various business processes like purchases, returns and stock transfers..etc or creating new document types.
plz suggest the best practise

hi
SAP Best practices are entirely different subject. your case is what is best suited for you and whether you can go with the existing document types of SAP. My reply will be it all depends upon your processes you have already and how you wish to take forward. As fas as document types are concerned unless it is specifically required to differentitate betwen different activites one must go with standards for example IMPORT and DOMESTIC POs , you should have two different document types, like wise.. or else it is better to go with standrads.
Regards

Problem in installing SAP best practises v1.600

Similar Messages

Maybe you are looking for