Problem in integrating BW(non-ideas) to R/3(ideas)

hi guys... i donno which area is suitable to post this question... thats y i'm posting in my regular forum..
i have installed BW(non-ideas) and R/3(ideas) two systems.
can we integrate non-ideas to ideas...
thanking you...
regards...
nithin

ya i meant IDES...
anyhow thank you very much guys...
i have a problem with connection between these two...
we have connected the R3(4.6c ides) system and BW(30B non-ides) system thru Network card... and tried to create the source system according to steps given in Fu-Fu...
i've created the logical system DEV to client 100(bw side) and... T90CLNT090 client 800( which is already there on R3 side)
now i created the background users and created the source system... it is going to be created successfully but not working as i tried to test.
i checked in RFC connections which have already created by the system...on both sides (R3 and BW) the RFC connection are created by the logical system names and
while i tried to test connection it is showing fine.... but since i tried to test remote log on...its showing nothing... it is not being entered into the remote system....
so finally my connection between these two is not working.. pl suggest me the proper step by step procedure..
thank you very much..
regards...
nithin
Message was edited by: nith l

Similar Messages

Problem switching from a non Idea Exchange board to an Idea Exchange board when typing a new post

Tested on Chrome/XP and IE8/XP
when I start a post in a non Idea Exchange forum and later on want to convert it into an Idea Exchange one, I can switch to the correct forum using the "Select Board" pull-down list. However, when posting, my post is refused because I haven't chosen a "Label". Well, that's because I can't!
In other words, switching to an Idea Exchange board does not add the "Label" options on the composition webpage, hence it is impossible to post that idea unless you copy it (or rely on the autosave function), start a new post directly into a Idea Exchange forum and paste your old post in it (or alternatively, load the saved draft once you have created the new post).
Disclaimer: this may have already reported, but as I said elsewhere, the Search function doesn't work either...

This is my first post so be gentle with me. I have a Pixi Plus running os 1.4.5. Last week we upgraded to exchange 2010 (or 14 as I've heard it called). I lost the connection on my phone. I tried changing the inheritable permisions above and it has not solved it. I'm pretty sure all the log in info I'm using is correct. It acts like it's communicating with the server because it says
Unable to sign in
Could not sign into account
THe mail server responded: bad login/password
I've changed several things and when I change certain things it says it cannot validate incoming mail server so I feel like I'm close but can't figure it out. Any help would be appreciated. Thank you.

Problem with Integration Repository

Hi,
I have problem with Integration Respository.when i am trying to connect it showing the fallowing.
Application Digital Signature can not be verified. you want to run the application.
when i click on run it showing
Unable to launch the application.
The details of Error is given below.
Launch File :
<jnlp spec="1.0+" codebase="http://ps3181:50000/rep">
    <information>
        <title>Integration Builder</title>
        <vendor>SAP AG</vendor>
        <homepage href="http://www.sap.com" />
        <description type="one-line">Repository</description>
        <description type="short">Repository</description>
        <description type="tooltip">Repository</description>
        <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
        <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
    </information>
    <security>
        <all-permissions />
    </security>
    <resources>
        <j2se version="1.4+" initial-heap-size="32m" max-heap-size="512m" />
        <jar href="repository/aii_ibrep_client.jar" />
        <jar href="repository/aii_ibrep_core.jar" />
        <jar href="repository/aii_ibrep_sbeans.jar" />
        <jar href="repository/aii_ibrep_rb.jar" />
        <jar href="repository/aii_ib_client.jar" />
        <jar href="repository/aii_ib_core.jar" />
        <jar href="repository/aii_ib_sbeans.jar" />
        <jar href="repository/aii_ib_rb.jar" />
        <jar href="repository/aii_proxy_gen.jar" />
        <jar href="repository/aii_map_api.jar" />
        <jar href="repository/aii_mt_base.jar" />
        <jar href="repository/aii_mt_rb.jar" />
        <jar href="repository/aii_mt_rt.jar" />
        <jar href="repository/aii_util_icons.jar" />
        <jar href="repository/aii_util_swing.jar" />
        <jar href="repository/aii_util_xsd.jar" />
        <jar href="repository/aii_util_xml.jar" />
        <jar href="repository/aii_utilxi_misc.jar" />
        <jar href="repository/aii_util_rb.jar" />
        <jar href="repository/aii_upload_core.jar" />
        <jar href="repository/aii_upload_sap.jar" />
        <jar href="repository/clientaii_ib_sbeans.jar" />
        <jar href="repository/clientaii_ibrep_sbeans.jar" />
        <jar href="repository/frog.jar" />
        <jar href="repository/focus14.jar" />
        <jar href="repository/sapxmltoolkit.jar" />
        <jar href="repository/jta.jar" />
        <jar href="repository/ejb20.jar" />
        <jar href="repository/exception.jar" />
        <jar href="repository/logging.jar" />
        <jar href="repository/guidgenerator.jar" />
        <jar href="repository/jperflib.jar" />
        <jar href="repository/tenComposite.jar" />
        <jar href="repository/tenGraph.jar" />
        <jar href="repository/tenGraphics.jar" />
        <jar href="repository/tenGenerics.jar" />
        <jar href="repository/tenGui.jar" />
        <jar href="repository/sapni.jar" />
        <jar href="repository/sapj2eeclient.jar" />
        <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
    <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core.cms., com.sap.aii.ibdir.core.cms.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="00" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="ps3181" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50004" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="000" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50004" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.directory.name" value="ps3181" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="ps3181" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="ps3181" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.repository.mapping.additionaltypes" value="none" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8000" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="ps3181" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="000" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="ps3181" /><property name="jnlp.SAPMYNAME" value="ps3181_TD1_00" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50000" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="512m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="00" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="30_VAL_REL" /><property name="jnlp.rc.applname" value="REPOSITORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="200410262202" /></resources>
    <application-desc main-class="com.sap.aii.ibrep.gui.appl.ApplicationImpl">
        <argument>webstart</argument>
    </application-desc>
</jnlp>
Exception :
java.lang.NullPointerException
     at com.sap.plaf.frog.FrogScrollPaneUI$1.propertyChange(FrogScrollPaneUI.java:113)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at java.awt.Component.firePropertyChange(Unknown Source)
     at javax.swing.JScrollPane.setHorizontalScrollBar(Unknown Source)
     at javax.swing.plaf.basic.BasicComboPopup.createScroller(Unknown Source)
     at javax.swing.plaf.basic.BasicComboPopup.<init>(Unknown Source)
     at com.sap.plaf.frog.FrogComboPopup.<init>(FrogComboPopup.java:34)
     at com.sap.plaf.frog.FrogComboBoxUI.createPopup(FrogComboBoxUI.java:185)
     at javax.swing.plaf.basic.BasicComboBoxUI.installUI(Unknown Source)
     at com.sap.plaf.frog.FrogComboBoxUI.installUI(FrogComboBoxUI.java:115)
     at javax.swing.JComponent.setUI(Unknown Source)
     at javax.swing.JComboBox.setUI(Unknown Source)
     at javax.swing.JComboBox.updateUI(Unknown Source)
     at javax.swing.JComboBox.init(Unknown Source)
     at javax.swing.JComboBox.<init>(Unknown Source)
     at com.sap.aii.utilxi.swing.toolkit.JComboBoxExt.<init>(JComboBoxExt.java:22)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities.createComboBox(Guitilities.java:987)
     at com.sap.aii.ib.gui.personalization.CommonResource.getLoginLanguageBox(CommonResource.java:153)
     at com.sap.aii.ib.gui.login.SplashLoginFrame.<init>(SplashLoginFrame.java:166)
     at com.sap.aii.ib.gui.login.SplashLoginImpl.doSplashLogin(SplashLoginImpl.java:96)
     at com.sap.aii.ibrep.gui.appl.ApplicationImpl.main(ApplicationImpl.java:624)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sun.javaws.Launcher.executeApplication(Unknown Source)
     at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
     at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks
kiran.B

Hi Kiran,
your XI J2EE engine is not properly initialized so you are not able to open IR....
just ask your Basis guys to see the startup log of your J2EE engine....if it has some errors, then just restart your J2EE engine.....then your this problem will be resolved....
also see in SMICM, whether ICM status is green or not..if not green then restart ICM from Administration->ICM monitor->restart->yes option of your XI server..
when XI restarts, just enquire from basis guys whether J2EE engine is up and running..... then open IR.....then your XI IR will open........
Thanks,
Rajeev Gupta
Message was edited by:
        RAJEEV GUPTA

TS1398 My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?

My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

Crop to the print size before pringing
LN

When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

I just installed my CS5.1 on my new Lenovo Laptop Win 8.1. Problem -- On Image Adjustments none of the adjustment options respond.

I just installed my CS5.1 on my new Lenovo Laptop Win 8.1. and everything worked for a day. On day 2 I ran into Problems -- On > Image >Adjustments none of the adjustment options respond. None of the toolbar functions such as >Crop etc respond.
I then installed the same download on my PC and everything works as it should.
Can anybody help please
Roland

Notebook Info
1 x Lenovo G710 Notebook, Intel® Core™ i5, 43,9 cm (17,3 "), 1000 GB HD,
Intel Core i5-4210M 2,60 GHz, (Turbo-Boost 2.0 bis 3,20 GHz)
43.9 cm (17.3") 900p (HD+) LED-Display (1600 x 900)
8192 MB DDR3-RAM
Harddisk: 1000GB SATA
NVIDIA N15V-GM mit 1GB DDR3
Prefs
As per download settings, I changed nothing
Image Info
Jpg conv.from RAW Canon, dim. 4746x3567, 6,64 Mb
The software worked on the first day, problems appeared next day. I uninstalled and deleted the exe.file, then redownloaded and reinstalled but same problem persists.
I then downloaded and installed on my PC and everything works.
Regards Roland

Adobe PDF/Acroforms & Digital signatures/Integrity/Authentication/Non repudiation

Hi folks,
I have been investigation the feasibility of using PDF as a customer-facing data collection mechanism, starting with Acroforms for a pilot, initially at least (we may consider XFA/Livecycle in a later phase).
I've got a demo application up and running using the FDF toolkit, presenting PDF forms to the web user, collecting and processing/storing the collected data etc.
My question is around how this process can be secured.
(Q1) (This may be strictly a web dev question, please ignore if considered not relevant here) : If the web application communicates over HTTPS, then the conversation between client & server is secure (encrypted at least, so that others cant sniff the content?) - but it does not necessarily authenticate the end user to the server?
(Q2) If we wish to ensure that the FDF data Submitted from the PDF form (via submit button to an ASP.NET url) is (a) known to be authentic from a particular known user, and (b) signed in some way to be non-repudiatable ... how can be do this with FDF ? If we re-generate a flat PDF document from the data they entered, is there any digital signature mechanism that can be employed for the public end-user to "sign" the PDF document in a manner that ensure Integrity/Authentication/Non repudiation ?
any pointers to Adobe or Third party toolkits, products etc. ?
best regards & thanks,
Aidan.

Q1. That's right. But if the form includes fields for a username/password, this could be sent along with the rest of the data and used to authenticate the user. Or you could use other common means, but as you said, this has nothing to do with Acrobat.
Q2. FDF can contain digital signature data. So the form would have to contain a signature field and the user would have to sign it. Assuming a self-signed signature, it's up to you whether to trust such a signature. The signed PDF is constructed from the original PDF that was served by concatenating the appended saves contained in the FDF. You can then validate the signature.
George

My computer sees the auto duplexer on my Epson Stylus PX720WD but iworks says it is not installed. I have contacted Epson and I have the impression that they don't know how to solve this problem. Anyone got any ideas?

My computer sees the auto duplexer on my Epson Stylus PX720WD but iworks says it is not installed. I have contacted Epson and I have the impression that they don't know how to solve this problem. Anyone got any ideas?

If you print to PDF first, and then print it from Preview does it work?

Facing problem in integrating my custom jsp with the workflow engine

Hi,
I am using Jdeveloper 11.1.1.6.0 for BPM 11g implementation on my Application.I have Weblogic Server 10.3 Installed and configured the domain. Also the server is up and running.
I am trying to create workflow and wants to integrate it with my custom jsp but i am facing problem in integrating my custom jsp with the workflow engine.Can you please answer the following questions:
1)how to link BPM human task with my custom jsp (Requester jsp).
2)how my custom jsp data(Requester data) will be stored in workflow engine and how the same data will be visible to the next custom jsp(Reviewer jsp).
This is urgent .Any early reply will be great help.
Thanks in advance.
Edited by: 990133 on Mar 24, 2013 5:31 AM

you forgot to add the usage dependency in the DC metadata section in your DC, you have to add the XSS~utils and fpm as a used DC's as part of your DC, try to add those, if you already done that, so check where missed the adding of used webdynpro components in any of the VAC's or FC's,
Cheer,
Appa

Problem while Integrating workflow with OID.

Hi I have a problem with integrating workflow with OID.I must execute the wf_ldap.synch_all() but I couldn't find WF_LDAP package body in the database.There is only package specification.How I can restore the wf_ldap package.
Thanks for help..

The file WFLDAPB.pls should be used to recreate the package body for WF_LDAP (this file is in the wf/sql directory).

Ale master data scenario integration with non sap syetem i.e seebeyound

hi
we have a business process scenario integrating with non sap system (i.e seebeyound)
action code      itemnumber    plant code
a(add)          material1     plant 2
d(delete)       material 3    plant 6
etc
we have upto one million materials assigned to 300 plants
we have to send all the above data to non-sap system (see beyound)
should we go for a custom idoc and setup the rfc configuration for the two sytems.
or can you please help how to go for this scaneriao

this is not one time.it is on daily basis.
please look at this scenario.what i need is how should i go for ale/idoc scenario for this one
Business case for Heiler Part/Plant Interface:
A key function of the Heiler PBC tool is to provide users a choice
between a "Global Catalog View" (e.g. all parts in the catalog) or a
"Local Catalog View" (e.g. the subset of parts in the catalog that have
a Material Master established for the user's plant in SAP). The "Local
Catalog View" is the default condition and encourages users to procure
parts that are on contract for their plant and potentially already
stocked as an inventory item at their plant. Parts that are not in a
user's "Local Catalog View" can only be procured as a spot buy purchase
order, requiring processing by a buyer.
The new Part/Plant interface is required in order for the Heiler PBC
tool to provide this "Local Catalog View" function. The Heiler
Part/Plant table will document what plants in SAP have a Material Master
record established for each part. SAP will maintain the Heiler
Part/Plant table using this interface. When a user performs a part
search in the Heiler PBC tool, the Part/Plant table determines if a part
is included in the user's "Local Catalog View".

Problem with Integration Directory

Hi,
I have problem with Integration Directory while connecting it showing the fallowing Error.any body help me with some solution thanks in advance.
Application cannot be started!
Details: com.sap.engine.services.ejb.exceptions.deployment.EJBConfigurationException: Exception while reading index of JAR file aii_ibdir_sbeans.jar in application sap.com/com.sap.xi.directory from the Configuration.
     at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2322)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:370)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:323)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:118)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:219)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4345)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2465)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2338)
     at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:41)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:141)
     at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:101)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Caused by: com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: -9,223,372,036,854,766,508,
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:83)
     at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:60)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:879)
     at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.getCachedConfiguration(ConfigurationHandlerImpl.java:371)
     at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getData(ReadAccessConfiguration.java:84)
     at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getConfigEntry(ReadAccessConfiguration.java:848)
     at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2320)
     ... 15 more
Caused by: java.sql.SQLException: [NWMss][SQLServer JDBC Driver]Connection reset by peer: socket write error
     at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCRequest.submitRequest(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCNonCursorExecuteRequest.submitExecute(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCExecuteRequest.execute(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.SQLServerImplStatement.execute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.executeQueryInternal(Unknown Source)
     at com.sap.nwmss.jdbc.base.BasePreparedStatement.executeQuery(Unknown Source)
     at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeQuery(BasicPreparedStatement.java:97)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:270)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:241)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.getConfiguration(DBAccessDefault.java:604)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:77)
     ... 21 more
Thanks
kiran.B

Kiran,
Start you J2EE engine visual administrator.
Choose Cluster--> server ---> services ---> deploy
Here there will be one application/service named "directory" (dont remember the exact name).Please start that service and your problem should be solved.
Thanks,
Anand

Problem in Integration of BI Reports with NWBC

Hi all,
I am facing a problem when integrating Bi reorts with NWBC (Netweaver Bussiness client).I Created a role for that and when i add the BW reports in it,after saving it's displaying it as ABAP report and automatically changed the selected option to abap report.when i logged into NWBC the link for the reports are displayed but when i execute them it shows me blank screen.I added transaction to it and working fine.Problem is with Reports.In query designer i tried to save the query as a Role.it was displaying in the role screen(PFCG) bt not in NWBC.Please help me.
1 more qns when I add report in role as a BW report it ask for query id what it is?i gave technical name here.
Thanks in Advance.
Vikas

Hi Vikas,
I'm facing the same problem, any tips?
Regards,
Ronen.

Office Integration and non-MS browsers

I have an 'issue' with Office Integration and non-MS browsers with our SharePoint 2013 on-prem enviroment (using SSO via ADFS).
Background: our internal client wants to move to SharePoint sites for collaboration with external partners. One of the selling points they're wanting to make to justify the move from their current
external collaboration site is Office integration - specifically the ability to open/edit/save documents by clicking on the document in SharePoint, having it open in Office (PC/client) for editing. Note they are wanting full integration with the client
version of Office - not OWA. The other requirement is that this work with both Firefox and Chrome.
Issue: Office integration works fine using Internet Explorer. When a user click on a document the document opens in Office and can be edited directly in the browser without any additional prompts.
But when clicking on a document via Firefox or Chrome the SSO login form pops-up when Office starts. Once the user enters their credentials they can work with the documents as desired. But our client does not want this second prompt.
Question:
Is there a way to configure SharePoint so that Firefox or Chrome open up documents for editing without a second logon prompt? I'm assuming not based on my research on how these browsers handle
cookies differently than IE. Can someone confirm?
Is there a dev solution to this? Note that because the users will be partners (non-employees) we are trying to avoid using a solution that would involve installing custom software on their pc's
(such as browser extensions).

Unfortunately you are looking at a plugin or having the users modify their browsers:
http://yalla.itgroove.net/2011/12/firefox-friday-3-sharepoint-login-prompts-on-firefox/
http://www.rhyous.com/2009/12/31/why-does-firefox-prompt-for-domain-ad-authentication-or-how-to-get-firefox-to-automatically-login-to-web-sites-with-domain-credentials-sharepoint-for-example/
Brandon Atkinson
Blog: http://sharepointbrandon.com

Problem in integrating BW(non-ideas) to R/3(ideas)

Similar Messages

Maybe you are looking for