Problem in Interactive SALV : Urgent

Hi all,
I am developing an ALV report using SALV concepts..
My requirement is that when i select multiple rows of the ALV generated and if i click on a Use Command Button say 'Display'
i need to show one more ALV with some fields of the previous ALV...I amusing the SALV concep of designing ALV's.
Please suggest how these can be achieved..
Itz an urgent issue..
Regards,
Arun

Hi,
1) for this u hav 2 define a Pf-status for ur ALV
[http://www.sapdev.co.uk/reporting/alv/alvgrid_pfstatus.htm]
in that pf-status make a button display with some func code 'DISP'.
2) now when u press this button u hav to display another ALV for this see
[http://www.sapdev.co.uk/reporting/alv/alvgrid_ucomm.htm]
with in
case
when 'DISP'.
perform display_sec_alv.
endcase.
Cheers,
Will.

Similar Messages

Problem in JAXRPC Webservice - Urgent

This is Santhakumar.
I have developed and deployed a JAXRPC webservice in Tomcat5.0 with JWSDP1.5.
WSDL is created and it works fine for normal java remote methods.
But when I write a code for to connect a live server ( EPP-Extensible Provisioning Protocol TCP server ), I could not invoke the service.
I get the following error:
================================================================
C:\examples\jaxrpc\dynamicproxy>ant run
Buildfile: build.xml
run-client:
[java] UrlString = http://localhost:8080/domain-jaxrpc/domain?WSDL
[java] java.rmi.ServerException: JAXRPCSERVLET28: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingS
ender.java:497)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.
java:294)
[java] at com.sun.xml.rpc.client.dii.CallInvokerImpl.doInvoke(CallInvok
erImpl.java:79)
[java] at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:48
2)
[java] at com.sun.xml.rpc.client.dii.CallInvocationHandler.doCall(CallI
nvocationHandler.java:121)
[java] at com.sun.xml.rpc.client.dii.CallInvocationHandler.invoke(CallI
nvocationHandler.java:85)
[java] at $Proxy0.domainCheck(Unknown Source)
[java] at dynamicproxy.DomainClient.main(Unknown Source)
run:
BUILD SUCCESSFUL
Total time: 3 seconds
C:\examples\jaxrpc\dynamicproxy>
===========================================================================
I tried in many ways to resolve it.But still I could not find out any solutions.
Is there any security settings to be handled for that?
The method works fine and the server is connected when I execute it from the normal java class in command prompt.
But when implementing that method in JAXRPC webservice only I found this problem.
Please share your ideas with me to resolve this problem.I am at urgent.
Thanks in advance.
Santhakumar.
The sample example site used is:
http://www.cis.umassd.edu/~hxu/Projects/UMD/WebServices/

Please check the OSS note - 1041204 - Controlling COMMIT WORK in production order BAPIs
Hope this helps you.

Problem adding interaction in CS 5.5 trial

Hi,
I have installed (twice) the Flash Catalyst 5.5 trial and still can not resolve this problem: after selecting a component (and with at least two states/pages) the
"Add Interaction" button in the INTERACTIONS panel does not populate any options in the CHOOSE STATE drop down menu. I can't point to any states.
Is this a bug (in the TRIAL) or am I missing something that needs to happen first?
Viro
PS: I'd be surprised if this basic work flow has changed (it's so straight forward in CS 5) , and I haven't seen anything in the current documentation, either in the help or on adobe TV tutorials that contradict this procedure.

Thanks to another poster and the answer below I have figured out that the problem was in fact of my own making. Another case of RTFM!
I still don't understand why this implementation was made, although I'm sure it extends the functionality of this application. Anybody?
5. May 27, 2011 12:08 PM
Re: Problems adding Interaction to button
In Flash Catalyst 5.5, you need to change the Choose Target menu to Application, then the next drop down list will populate with the State names, select the state that you want, and click OK. You can control when this happens further by using the When in Any State menu. That menu will allow you automatically restrict which state it works in.
Hope this helps
Chris

Infospoke problem - opeb hub service - urgent

hello friends,
I am trying to run one infospoke but getting the below error.
*The 3rd party status for request ATTRIBUTE_MSGV3 has not yet been set*
I have checked all the source and traget structures , which are active .
The source system connection is also OK.
RFC is also OK .
Could you please let me know , how to solve this problem , it is quite urgent .
Thanks

refer:
http://help.sap.com/saphelp_nw04s/helpdata/en/a8/a6eae34c9e9b4cbd8fbc7acd2845d0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da

I have a problem with interactive report in horizontal scroll bar

hi all,
in my interactive report the horizontal scroll bar is not visible and i have created a scroll bar with the html code and i have a problem in that scroll bar when ever i will click the select list and if i will move the scroll bar and the select list is also moving but it the select list dont have to move .pls give me a solution for this urgent.
thanks in advance

Kishore suresh wrote:
hi all,
in my interactive report the horizontal scroll bar is not visible and i have created a scroll bar with the html code and i have a problem in that scroll bar when ever i will click the select list and if i will move the scroll bar and the select list is also moving but it the select list dont have to move .pls give me a solution for this urgent.
thanks in advance
Hi,
How you think anybody can help if you do not post single line how you have try create that scrolling report ?
And if your issue is urgent, you are seeking help from wrong place.
Regards,
Jari

IOS 6.0.1 and iBook 3.0.1 - problems with interactive epub

My iPad 2 was recently updated wtih IOS 6.0.1 and iBook 3.0.1. After the recent update some of my interactive epub files are not working properly. Mainly slideshows, working fine earlier, where I have used jquery and javascript. Does anyone know why? Is there a bug in the updates. Thanks for helping me out of this problem.

LadyAce
Did you see a release note on it somewhere or did you find out through your own experience with it?
Since it was a quietly released 13.3 I am curious what it fixed officially. According to the release notes from Apple with 6.0.1 it did not make any mention that it was patching the data leaking when using WiFi and cell data. Only that complaints of dropped wifi from people using iPads and iPhones that was previously reported was fixed.

Problem using Interactive Report in Application Express 3.2.1.00.11

Hi All ,
I am using Interactive Report in Application Express 3.2.1.00.11
I have made report as editable by using following query
Select ROWID,
APEX_ITEM.CHECKBOX(1,IDSKILL,'UNCHECKED') "Mark",
APEX_ITEM.TEXT(2,IDSKILL)"IDSKILL",
APEX_ITEM.TEXT(3,SKILL) "SKILL",
APEX_ITEM.SELECT_LIST_FROM_LOV(4,IDBEARBEITER,'DIR_LOV'),
APEX_ITEM.TEXT(5,ÄNDERUNGSDATUM)"ÄNDERUNGSDATUM"
from SKILLS
Problem :-
When I click FILTER option in Interactive Report , It is taking under Expression "<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />" and displaying in search filter as
Skill = '<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />'
Can I make display like Skill ="ARIS"
Any suggestion is welcom ..
Thanks in advance
Cheers
Sachin Srivastava

Hi,
As I know there is no fix/workaround for that.
Disable filtering and other stuff is only. But I think you of course like have filters and other nice thing of interactive report. Other vice you have done classic report.
It is better use classic report and build own custom filers.
Br, Jari

Problem with interactive forms using ABAP

Hi all,
    I am trying to create an interactive adobe form using ABAP in ECC 6.0. But while execute the form, it is creating an error saying that
Exception       SYSTEM_ERROR
Message ID:          FPRUNX                     Message number:           001
Message:
ADS: The render error log file has been written to D:\u(200101)
But i was able to create adobe interactive form using WebDynpro and its working perfectly. But the problem is while using ABAP method.
Do anyone have an idea why its happening?
Thanks and Regards,
Raja Sekhar

Hi
Interactive Forms based on Adobe software is SAP's new solution for forms development. Its first release has the focus on interactive use of forms. High-volume printing is supported in principle, but - being a new solution - the performance has not yet reached the same level as Smart Forms or SAPscript, two established solutions that had years to grow. Interactive Forms is the only solution that will continue to be enhanced with new features, while SAPscript and Smart Forms will be supported without limitations.
When (or if) to move to Interactive Forms depends on your requirements. For interactive forms usage, i.e. the new functions, you have no choice, as the existing solutions don't support it. High-volume print scenarios need to be carefully analyzed to see whether your concrete requirements can be met at this point.
However, it is possible to move to Smart Forms and design your forms in such a way that a migration at any point in the future would be but a small step. Smart Forms offers from Web AS 6.40 a migration wizard to Interactive Forms. Technically, everything can be migrated, but we recommend against things like ABAP program nodes, for example.
You are not forced to ever go to Interactive Forms if you don't want to. It really depends on whether your client needs any of the new features in Interactive Forms. Also, if they are currently working with JetForms, they could enquire with Adobe directly what migration path they offer to the joint solution.
It is impossible to make a blanket statement on what needs to be done in each of the applications using a form for output. Despite the same underlying technology, forms handling has always been a decision for each SAP application: Some do it through customizing, some through coding, some in yet anither way.
What I CAN say from a technology pespective is that all applications are in the process of creating their forms based on Interactive Forms so that by 2007 pretty much all SAP forms will be PDF-based. Obviously, each application does it within the framework of their application - but they all use Interactive Forms.
By the way, be aware that in ERP 2004 this forms solution is subject to a limitation for high-volume printing scenarios as we cannot ensure that ALL customers will be content with the performance in ALL scenarios with this release. (see SAP Note 863893).
To get an overview idea about Adobe forms ,
Using SFP , first you need to create a interface . in interface you can declare the import and export parameters and also the declaration part, coding etc : This is nothing but similar to Function module interface.
And now we have to create the Form which is interactive. Create the form and enter the interface name which you have created in first step, so that the parameters , declarations of fields etc : will be copied and available in the form layout. So that you can drag and drop these declared fields ( dclared fields of interface ) to the layout.
Create the context and layout in the form.
The layout generated can be previewed and saved as PDF output.
Now we need to integrate the driver program and the PDF form to get the final output as per the requirement.
On activating and executing the form you will get a function module name just similar to smartforms.
The driver program needs to call this FM.
Refer to the below sample code :
DATA : is_customer TYPE scustom.
DATA : it_bookings TYPE ty_bookings.
DATA : iv_image_url TYPE string.
DATA : iv_sending_country TYPE adrc-country.
DATA : it_sums TYPE TABLE OF flprice_t.
DATA : docparams TYPE sfpdocparams.
DATA : formoutput TYPE fpformoutput.
DATA : outputparams TYPE sfpoutputparams.
PARAMETERS : pa_cusid TYPE scustom-id.
SELECT SINGLE * FROM scustom INTO is_customer
WHERE id = pa_cusid.
SELECT * FROM sbook
INTO CORRESPONDING FIELDS OF TABLE it_bookings
WHERE customid = pa_cusid.
outputparams-nodialog = 'X'.
outputparams-getpdf = 'X'.
*outputparams-adstrlevel = '02'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
docparams-langu = 'E'.
docparams-country = 'US'.
docparams-fillable = 'X'.
CALL FUNCTION '/1BCDWB/SM00000043'
EXPORTING
/1bcdwb/docparams = docparams
is_customer = is_customer
it_bookings = it_bookings
IV_IMAGE_URL =
iv_sending_country = 'US'
IT_SUMS =
IMPORTING
/1bcdwb/formoutput = formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
http://help.sap.com/saphelp_nw04/helpdata/en/d2/4a94696de6429cada345c12098b009/frameset.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
/people/thomas.jung3/blog/2005/07/13/lessons-learned-from-adobe-forms-development
/people/community.user/blog/2006/11/20/search-help-in-isr-adobe-forms
/people/franklin.herbas/blog/2005/12/13/2d-barcode-pdf-forms-with-sap-netweaver
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
http://help.sap.com/saphelp_nw04s/helpdata/en/43/849b3482206353e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/82538c0c4458bbe10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/55c841d202c317e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/6d/bd2d828aa04eeb9451aad0d02ae9a0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/company/press/press.epx?pressID=2785
http://www.adobe.com/enterprise/partners/sap.html
http://www.adobe.com/enterprise/partners/pdfs/sap_datasheet.pdf
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
Use the Tcode : SFP
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
Very useful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/00f4f594-7306-2a10-8483-b45bec157093 [original link is broken]
for PDF forms
http://help.sap.com/saphelp_nw04/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/content.htm
See the links for debugging
Refer to this thread
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
Debugging
Check these documents.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_nw04/helpdata/en/5a/4ed93f130f9215e10000000a155106/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
ABAP Debugging
http://www.saplinks.net/index.php?option=com_content&task=view&id=24&Itemid=34
Look at the SAP help link below
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
For online PDF form creation...........
https://createpdf.adobe.com/index.pl?BP=IE&LOC=en_US
for Other information use these Links
C:Documents and Settingsvuser01DesktopSANKET SPersonalVikalpsap netweaver ABAP and adobe Formspdf form webpdf based print forms.htm
C:Documents and Settingsvuser01DesktopSANKET SPersonalVikalpsap netweaver ABAP and adobe Formspdf form webSAP Interactive Forms by Adobe.htm
http://searchsap.techtarget.com/generic/0,295582,sid21_gci1079310,00.html?Offer=SAPwn927nw
http://www.thespot4sap.com/articles/SAP_Netweaver_Introduction.asp
http://help.sap.com/saphelp_webas630/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c7cbe08d-0c01-0010-8bac-b9ce7348246c?source=gawindev09&kw=sap+netweaver&adgroup=brand_netweaver
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
https://websmp204.sap-ag.de/~sapidp/011000358700004952682004E
/people/venkata.ramisetti/blog/2006/09/21/configuring-output-types-for-pdf-based-print-forms
http://help.sap.com/saphelp_erp2005vp/helpdata/en/96/6ee0d5b39640d68fc0078fc575114a/frameset.htm
D:adobe livecycle designerAdobe_Designer_71BeforeInstall.htm
http://sdn.sap.com/irj/sdn/interactiveforms
very imp ADS configuration guide
http://help.sap.com/saphelp_nw2004s/helpdata/en/95/5a08cd0e274a0bae559622d6670722/frameset.htm
Could anyone provide the complete manual of SAP Query Creation
Tcode is : SFP
chk these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
see these links..
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
/people/thomas.jung3/blog/2005/07/13/lessons-learned-from-adobe-forms-development
/people/community.user/blog/2006/11/20/search-help-in-isr-adobe-forms
/people/franklin.herbas/blog/2005/12/13/2d-barcode-pdf-forms-with-sap-netweaver
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
http://help.sap.com/saphelp_nw04s/helpdata/en/43/849b3482206353e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/82538c0c4458bbe10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/55c841d202c317e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/6d/bd2d828aa04eeb9451aad0d02ae9a0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/company/press/press.epx?pressID=2785
http://www.adobe.com/enterprise/partners/sap.html
http://www.adobe.com/enterprise/partners/pdfs/sap_datasheet.pdf

Problems printing Interactive PDFs built in InDesign CS5

I am having issues printing PDFs that I have exported from InD CS5. I am creating interactivity in InD, such as buttons, click on, roll off, etc. The interactivity works perfectly, however, when I try to print, the PDF, the rollovers print, even though I do not want them to. The rollovers go away once I click through all of the buttons, but I do not want to have to have my client have to click through all buttons first, before successfully printing the PDF without the rollovers.
anyone have any experience with this? or solutions?
thanks,
aligori

@CoGordo4:
If the answer for Peter's question is "yes", I suspect the following:
You export to PDF with the option "Export Layers: All Layers" and you have a layer set to "Show Layer" NOT checked in the Layer Options panel above your graphic with an object that obscures your vector graphic filled with the color of your background. Thus the image will be included in your exported PDF but effectively does not show.
If so, just export with "Export Layers: Visible & Printable Layers".
If this is NOT the case then we possibly could circumvent the problem:
Is your placed vector graphic of the file type EPS?
Do you have Acrobat Pro and Acrobat Distiller installed?
If so, try to convert that EPS to PDF using Distiller, preflight it with Acrobat Pro and place the PDF.
If the answer is "no" (you could not see your graphic in Preview mode), some of the following could apply:
1. The holding frame of the graphic OR the graphic inside the holding frame is marked as "Nonprinting" in the attributes palette (check both instances).
2. The object is positioned on a layer with "Print Layer" NOT checked in the Layer Options panel and you export with "Export Layers: Visible & Printable Layers" in your PDF export settings.
Uwe

Problem with interactive alv

hai ,
    I have problem with my interactive alv ,
when i double click the line item the same line item is displaying for all the selections ..
LASS lcl_event_handler IMPLEMENTATION.
METHOD on_double_click.
find out selected line (double click)
    READ TABLE i_fd INTO w_fd INDEX e_row-index.
    IF sy-subrc NE 0.
      MESSAGE i075(bc412). " <-- internal error
      EXIT.
    ENDIF.
    "CLEAR i_popup.
    LOOP AT i_trdt INTO w_trdt WHERE deal_number = w_fd-rfha .
     IF sy-tabix GT 1.
       CLEAR w_trdt-deal_number.
     ENDIF.
      APPEND w_trdt TO i_popup.
    ENDLOOP.
    CLEAR : w_fd , w_trdt .
    IF i_popup IS NOT INITIAL .
      CREATE OBJECT ref_container
       EXPORTING
   parent                      =
         container_name               = 'CONTAINER1'
   style                       =
   lifetime                    = lifetime_default
   repid                       =
   dynnr                       =
   no_autodef_progid_dynnr     =
EXCEPTIONS
   cntl_error                  = 1
   cntl_system_error           = 2
   create_error                = 3
   lifetime_error              = 4
   lifetime_dynpro_dynpro_link = 5
   others                      = 6
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CREATE OBJECT ref_alv
        EXPORTING
   i_shellstyle      = 0
   i_lifetime        =
          i_parent          = ref_container
   i_appl_events     = space
   i_parentdbg       =
   i_applogparent    =
   i_graphicsparent =
   i_name            =
   i_fcat_complete   = space
        EXCEPTIONS
          error_cntl_create = 1
          error_cntl_init   = 2
          error_cntl_link   = 3
          error_dp_create   = 4
          OTHERS            = 5
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      PERFORM form_layout.
      PERFORM f_cat.
      CALL METHOD ref_alv->refresh_table_display.
     CALL METHOD g_alv->refresh_table_display.
    ENDIF.
   CALL METHOD g_alv->refresh_table_display.
CLEAR i_popup.
ENDMETHOD.                     "on_double_click
ENDCLASS.                    "lcl_event_handler IMPLE
Regards,
K,Vinay Kumar

Hi,
Try..
READ TABLE i_fd INTO w_fd INDEX es_row_no-index.
Hope it helps you.
Murthy

Problem with interactive booklet

i just bought B'Day, by Beyonce, whihc comes with an interactive booklet. i double click on it and nothing happens.... i tried to open it in Quicktime and RealPlayer but it wouldn't work
how does a digital booklet work?
does anyone know why this is happening?

I'm having the same problem. I sent them an e-mail last night and got some delusional response that had nothing to do with my question. I specifically asked about the "B'Day" interactive booklet and said it wouldn't work and all they said was you've downloaded "B'Day" already. I sent them a second e-mail, but I haven't heard back yet.
I'm also having a problem with my "Idlewild" interactive booklet. I can't get it to expand into a larger window. It's only done it once.
The whole interactive booklet thing seems like a complete mess. Not to mention they have 2 of the same version of "B'Day" on iTunes if you click on her name. I'm wondering if one version had the actual booklet and the other didn't. There was an incident with Danity Kane's album on release day also. They had two versions at first, one with a video and one without. But both were the same price. They eventually got rid of the one that didn't include the video. I knew it was an error. But I'm wondering if the same thing happened here.

Problems exporting interactive PDF in CS5.5

When I try to use my old PDF settings from CS4 my interactive elements do not work. See the snapshot below.
I am able to export successfully pressing Command-E and choosing Adobe PDF (Interactive) but the images, at least in the first example I have chosen, do not reproduce properly in the PDF. See comparison of original created in CS4 (left) and the CS5.5 version (right):
Does anyone have any ideas how to resolve this?
I am using Acrobat X and system 10.6.8

I have found the answer to this problem myself!
Because the interactive setting does not support spot colours being kept it causes problems with any RGB Illustrator files that have been set up using a spot colour. You may well ask why you would want spot colours in an RGB Illustrator file. Well, it's to keep any Lab values intact, but to get around the PDF colour issue you can't have any spots used in this way.

Problem with Interaction edits to subtitle

Can't select the subtitle to add instructions in Widget Properties. Updated to Captivate 6.0.1.240 that solved other edit problems, however still can't select and edit the subtitle of the Accordian interaction.
Any suggestions?

Didn't I answer this already once? Or is my memory tired? I learned to edit first the content, then mostly the title/subtitle field are easier to access for editing.

Problem with interaction center web client e-mail

hi gurus, my problem is in interaction center webclient, when i click in the e-mail link,appears the email form but i cant send any email because all the fields in the screen (subject, body , from, date, to, etc) are not enable (i cant write anything because is not possible), so i dont know how to enable this fields in the interaction center web client.
In interaction center win client i dont have this problem.
I post this thread in crm forums but nobody knows how to do it, so i hope maybe here any one knows thanks

Hi.
I ran into this problem. How is it solved?
And another question-how to set up a mailing list Search ?

SAP CRM 5.0 - capturing iObject details in interaction Record - urgent

Hi every body,
Pl let me know how to capture iObject in Interaction Record, where to capture...is it standard functionality of SAP CRM 5.0. I am unable to find.
Reason I am asking is: I want to create service order as a follow-up from interaction record. In this service order I will add item level service products required for this ibase.
In Service Order there is a field to capture iObject ID, but I want this to be populated automatically when I create service order from interation record. Hence I need to know how and where to capture iObject in interation record. In case any OSS notes are there to be applied, let me know. In case development is required let me know.

Thanks Rekha
Your guidance has help me sovle this problem, changed the Determination Rule to 14000148 and this tested succesfully.
Many Thanks again - max points awarded.
Regards
Panduranga

Problem in Interactive SALV : Urgent

Similar Messages

Maybe you are looking for