Problem in intial stock posting

Hi friends!
when am i doing the intial stock posting for material through mbic and 561 movement type system give the below message
Account determination for entry CAIN GBB ____ BSA 3000 not possible.
at the same time i checked in account assignment.for CAIN GBB-BSA3000 was assigned.
how can i overcome this problem.plz help me
Thanks
venkat

Dear,
the meaning of CAIN GBB ____ BSA 3000
CAIN - is chart of account
GBB - transaction
_____ is space = valuation modifier
BSA - account modifier
3000 - valuation class
Check the entry is there for GL a/c in OBYC
In which plant you are doing his transaction and what is the valuation area?
Is valuation are is company code or plant?
Edited by: Rajesha Vittal on Mar 11, 2008 6:45 PM

Similar Messages

MB1C Intial Stock posting error

Hi Gurus,
When i am doing MB1C intial stock posting i got a error " G/L Account 39999 does not exist in Company Code 9999"....
Give me suggestion...
Thanks in Advance
Ravikumar Talluri

hi Ravi
The error occurs because of not maintaining the GL account
u can maintain the gl account for that company code in the tcode <b>fs00</b>
goto that t code and give the gl account that u occured during the posting of the stock and enter the company and try to save
Now goto the MB!C and maintain the stock and now u will not get that error
reward points if useful

Intial stock posting

Hi All,
While posting intial stock i am getting the following error
There is no item category assigned to account 790005/INT
regards
ram

Hello
I think this is related with FI Module. Please get in touch with your FI/CO consultant for the same.
Mean while I think this is a document splitting error. You can try this. Go to SPRO Financial Accounting(New)>General Ledger Accounting (New)>Document Splitting>Classify G/L
Accounts for Document Splitting and add your GL and assign the correct item
category(as per the nature of GL) to it.
Regards
Prashant Ranalkar

Intial stock posting problem plz help me

hi gurus,
i hav struck up in mb1c,i could post the stock,iam getting the error message is 12/2008 is not open to account type S and GL acct 799999.i hav went and altered in OB52,Ihave tried in OBYC but still iam getting this message.
plz help me with steps
regards
kannan

HI GURUS,
I ACCEPT ALL UR ROUTINE PROCESS WERE I HAVE DONE ALL THOSE CONFIGURATION ,OMWD,OB52,OMWB ALL STUFFS BU STILL ERROR IS ON ITS WAY.I HAVE GIVEN GL ACCOUNT AS 800000 AND DONE MY CONFIGURATION IN OB52,AS
0001-+-ZZZZZZZZZ-1-2008-12-2009-13-2008-16-2008-
0001-A-zzzzzzzzz-1-2008-12-2009-13-2008-16-2008-
0001-D-zzzzzzzzz-1-2008-12-2009-13-2008-16-2008-
0001-K-zzzzzzzzz-1-2008-12-2009-13-2008-16-2008-
0001-M-zzzzzzzzz-1-2008-12-2009-13-2008-16-2008-
0001-S-zzzzzzzzz-1-2008-12-2009-13-2008-16-2008-
next i have assigned the valuation group code to the company code but still i am getting 12/2008 is not open to account type s and gl account 799999

Weird Problem in QM stock posting from Quality Stock to Unrestricted

Hi all,
Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
for this material and puts the stock in to Quality stock (I checked in MMBE).
Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
Sorry for the long post. How to correct this? Please help me!
Thanks in advance,
Vinodh

I don't know why this happenned. Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on. That is usually greyed out and is set by having an inspection type activated. You can't manually set that once an inspection type is added. But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
I would try to first clear all your inspection lots first.
Then delete all the inspection types from the material. And I mean actually go in and delete them.
Then use QA08 to reactivate the ones you need.
Then see if this solves the problem.
FF

Intial stock posting MB1C - a big challenge

hi gurus
"Period 012/2008 is not open to account type S and Gl account 800000".This my error message
i have done all configurations starting from,
converting periods from 10/2002 to 12 2008,
assign company code to variants to 0001,
done alterations in OB52,
changed my periods to company code in OMSY.
done all my configurations in my OMWB.
assigned fiscal year variants.K4 to company code.
please any one of u can help me on this issue,iam working in IDES.
plz reply with valid replies,not on routine procedures.
full points to be awarded immeadietly,
regards
kannan

Hello,
Financial Accounting --> Financial Accounting Global Setting --> Documents --> Posting Periods --> Open / Close postine periods.
See the periods are in current period for the account types S? , if not then you need to maintian it in current period for your posting period variant. Get in touch with your FI expert.
Prase

Regd stock posting

< Moderator: please title your subject appropriately. "regd" is not a word. thread locked. >
Hi friends
i faced one problem in the stock posting
i received one problem "G/L account 799999 dose not exit in company code -
i went to fs00 and check the 799999 G/L account but the sytem showing "799999 account bloked for creation in chart of accounts INT"
could please tell me how to solve it?
thanking you
siva

Hi,
when you open FS02, give your GL account, on the right side close to with template TAB, there is an icon in the shape of lock, click that it will unlock the GL if locked already.
otherway is to find if the GL is locked or deleted, in FS02, in GL field do F4, in that window you can search by " GL account with delete/lock flag in company code".
Use this option, you will find whether your GL is locked or not.
Regards

Stock Posting List from Item Master Data

Hi,
We just encounter a strange problem. In SAP we could go to an Item record and right click to choose Stock Posting List which will bring out the stock posting report that list all the in and out records for this particular item. The report can be generated shortly.
Over the weekend we enter into a new fiscal year and suddenly the Stock Posting List from item master does not contain any entries from previous fiscal year and it takes very long to show the list.
We could however run the Stock Posting List as normal from Stock Reports which will show all the records.
The problem if the Stocking Posting List from the item master only shows entries in the current fiscal year why suddenly the performance degraded when there is actually less data to be displayed.
Any one encountered such situation as well?
We are on PL44
BR,
Jimmy

Hi Jimmy,
This is the System behaviour in SAP 2007 A. Due to the changes in posting period functionality, it is not possible to choose posting period. That is the reason why if you right click on an Item Master Data, Inventory posting list only for the current year appears. If user wish to see transaction for the other years, he needs to open Inventory Posting List report and set dates in the Selection criteria window.
Regards,
Varun
SAP Business One Forum Team
Edited by: Varun Kumar on Mar 3, 2009 9:36 PM

Problem in BAPI for stock posting from quality inspection to unrestricted usage

Hi all,
I am using BAPI_GOODSMVT_CREATE for stock posting from quality inspection to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
GOODSMVT_HEADER:
PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
GOODSMVT_CODE:
GM_CODE: ‘04’ .
GOODSMVT_ITEM:
MATERIAL = MATERIAL NO
PLANT = PLANTCODE
STGE_LOC = ‘WIP’
BATCH = BATCHNO
MOVE_TYPE = ‘321’
ENTRY_QNT = 100
ENTRY_UOM = ‘EA’
ORDERID = Prd ord no.
After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
Kindly help me.

Hi Naveen,
Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

Stock posting problem

hi guys
stock posting from one plant to another plant in one company code.. error message
error message :
No accts maintained for company code clearing between comp.cds ABC and 4350.
Message no. F5730
Diagnosis
A company code clearing transaction requires that you maintain clearing
accounts for each of the company codes involved.
System Response
You must carry out company code clearing for the posting.
You cannot carry out the posting if you have not assigned any
clearing accounts.
Procedure
Maintain the clearing accounts.

Dear Srinivasarao,
you are trying to do stock transfer within a company code between the plants which can be done through T.Code MB1B with Movement type 311.
but as per your info. the error message belongs to stock transfer between the company codes which is STO Concept, for this u need to do the STO settings.
check the type of stock transfer.
bye
rajam

How to change the posting date in UD stock posting for a HU managed item?

Hi,
We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
Thanks & Regards,
Madhavan Krishnamoorthy.

I don't think you can.
Craig

AFS-QM Error in stock posting performed by taking Usage decision

Hi all,
during stock posting with 105 mov type performed by taking Usage Decision (QA11), I faced with a strange system behavior, described beneath.
Previuos steps:
Purchase order creation
Partial Good receipt performed by MIGO, mov type 103 (Blocked stock from PO)
Automatic Creation of Inspection Lot
Error encountered:
If I take usage decision (QA11) for the inspection lot created, putting the stock checked in Unrestricted Use (correspondant mov type = 105), in the following good receipt (related to the same purchase order), the incoming stock available is less of the real quantity, previously accepted..
After some checks we understood that with 105 mov type the system doubles the real quantity previoulsy accepted, acting in the following manner:
Initial PO: 100 PZ
1° Good receipt: 30 PZ
(automatic creation of inspection lot)
If we take a usage decision, posting stock to unrestricted use (mov type 105), in the 2° Good receipt, the quantity available from the same PO is not 70 PZ (100 - 30), but only 40 PZ ! ! (100 - (30 * 2)) = 40
Please note that it does not occur if we post stock (always 105 mov type) with a MIGO transaction, so we are forced to think that the problem is strictly related to AFS-QM inventory posting, and not to 105 mov type or inbounding process.
Thanks for your collaboration,
Regards,
Ale

I'm not familiar with the specific apparel and footwear solution but with regards to QM, if you are using the standard SAP delivered stock postings, it should use 105 to accept the material to unrestricted for the GR blocked.
I would first use MB51 for the material and batch and review all the material movement documents. Look at the trail of movements and try to see where the changes happen.
In your example, what did the unrestricted inventory and GR blocked inventory show as stock levels?
I'd also check OSS for issues related to AFS/QM. This is not new functionality in SAP so I would be surprised if this was an actual bug or problem in the system that hasn't been seen before.
FF

Stock posting not possible

Hi All,
I am trying to put some stocks for a material using movement type 561 and transaction code mb1c,but I am getting an error which states"No stock posting possible for this material".
Please suggest how to proceed.
Regards,
Neelam

dear neelam
Please go to OMS2 Transaction,there u give ur material type, and enter then on the left side chose Quantity/Value Updation under dialog structure click on it.chose ur Valuation Area (.i.e,ur Plant) and material type.there will be tick under the Quantity Updation and also under the Valuation Updation.please remain the tick mark as it is under Quantity Updation.But please
REMOVE TICK MARK UNDER VALUATION UPDATION.then please don't forget to save, save n exit. then maintain stocks MB1C.
Defenetely i am sure that u will get the soluton for ur problem
rewards if it helps
siva

Stock posting of 08 inspection lot which is having status of LTCA

Hi Freinds,
I am having problem in posting the stock from Quality to unrestricted.
The details are as follows;
A stock transfer Inspection lot is created and by mistake given the UD as "Rejected" and cancelled the Inspection lot.
Later it has been realised and the UD code has been removed and left blank and Saved the UD screen.
The stock is in Quality and it has to be posted to Unrestricted.
If I go to transaction QA02 to "Reset the cancellation", it is greyed out and we are unable to do that.
We are unable to give UD also because the Inspection lot status is not allowing.
I have used transaction "MB11" with movement type 311, I am getting the error as "Stock posting only possible in QM".
Please let me know how to post the stock to Unrestricted.
Thanks
Giri
Edited by: Giri on Dec 15, 2009 10:23 AM

Hi Gajesh,
The problem is still continuing and we have implemented notes 48815 and 174877, however we could not able to solve the issue.
In the mean time we have asked SAP to get the solution.
The sequence of process followed by the user where in we have reached this situation;
1. A stock transfer Inspection lot(IL) is created (using MIGO, 322 movement type)
2. For this IL, they have gone to QA32 and given the UD as "R" and they didn't post the stock and SAVED the IL.
3. They went back once again to UD screen using QA32 and cancelled the IL and SAVED (Stock posting not done even now). At this point the IL status is LTCA
4. They went back once again to UD screen using QA32 and "Revoked" the UD and SAVED (Stock posting not done even now).
5. Now the stock cannot be posted and the lot cannot be revoked.
So we have asked SAP for help, I will keep you posted. In the mean time if you get any idea, please propose.
Thanks
Girish

Problems Importing Initial Stock On Hand using Workbench

I am trying to import data into SAP B1 for a new customer using the workbench. I am currently working on importing SOH and decided the only way to use the workbench would be to import the initial SOH as a set of stock take figures. When I do the stock posting I would select a price list I had previously imported that showed all of the average purchase prices for the stock.
The problem is when I click the reconcile button I get an error:
Material Stock Account not defined [Administration - Default for Retained Earnings]
I looked in the G/L Account Determination settings and Warehouse Account settings, but I can't see anything substantially different to the demo database.
Can anyone help me here?
Am I using the wrong method? (Note there are 3 warehouses and 3500 items, so manual entry is not possible)

Hi Michael,
Check in the "Item Master Data"->"Warehause Data":
1. If Item defined for warehause 01
2. If you see warehause data and accounts in the matrix
3. Check "Set G/L Accounts by". If there's "Item Group" you have to define accounts for item groups.
Best regards,
Mark

Problem in intial stock posting

Similar Messages

Maybe you are looking for