Problem in j2sdkee1.2.1 installation
Hi,
I installed j2sdkee1.2.2 . I set the class path as c:\j2sdkee1.2.1\lib\j2ee.jar and PATH as "c:\j2sdkee1.2.1\bin;c:\j2sdkee1.2.1\lib".
I also edited userconfig.bat under \bin directory and set J2EE_HOME=c:\j2sdkee1.2.1.
Everytime I try to start the server with "j2ee -verbose" I get the following error "ERROR: set J2EE_HOME before running this script"
Can someone please help?
Thanx in Advance
In j2ee.bat :
set JAVA_HOME=blahblah
set J2EE_HOME=blahblahblah as your first two lines
Hi,
I installed j2sdkee1.2.2 . I set the class path as
c:\j2sdkee1.2.1\lib\j2ee.jar and PATH as
"c:\j2sdkee1.2.1\bin;c:\j2sdkee1.2.1\lib".
I also edited userconfig.bat under \bin directory and
set J2EE_HOME=c:\j2sdkee1.2.1.
Everytime I try to start the server with "j2ee
-verbose" I get the following error "ERROR: set
J2EE_HOME before running this script"
Can someone please help?
Thanx in Advance
Similar Messages
-
When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it
Have you completed all windows update including service Pack1? If not, please complete all the windows update then follow steps below to re-install all over.
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Problem with SAPSERVER.CMD during installation, nothing happens
In the process of installing in our test environment but I seem to have problems with the Oracle 9i installation. When i double click the file sapserver.cmd nothing happens.
I have tried the workaround with renaming "symcjit.dll" and changing parameter JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m in oraparam.ini file. Then rerun installation with command "install\win32\setup.exe -J-Dsun.java2d.noddraw=true".
This time error message "<i>Could not initialize the Java virtual machine. Program will exit!</i>" occurred.
Can anyone please help me how to fix the problem. Thanks.I am also facing same problem--
I have got IDES 4.7 CDs..
I am trying to install Oracle RDBMS 9.2 NT thru first CD... when I am running SAPSERVER.CMD it does nothing except showing wait pointer for few seconds.
it is actually creating three folders in TEMP folder images, jre, oui
I have tried running SAPSERVER.CMD from command prompt also but there was no luck.
When I tried to run SETUP.EXE there was same situation.
Even i tried to run setup.exe from \NT\I386 directory on command prompt with following command ...
SETUP.EXE -RESPONSEFILE E:\NT\I386\response\sapserver.rsp
but nothing could help me out...
I checked everywhere but could not find and LOG file which could explain me that what went wrong..
this is an appeal to all are techies.. plz help me..
I have tried it on two machines:
1) p4 2.66 512 ram 80+40 gb HDD 2000 server with sp4 and ie6, JRE, .NET framework 2.0
2) Dual core with 1 gb RAM 300 GB HDD 2003 Server with SP2 JRE, .NET framework 2.0
There was exactly same situation on both the machines..
Thank in advance -
I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?
This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).
-
Hello, I'v been using Adobe creative suite for a real long time and this week end I upgraded to CC. Most of the applications have been installed. Unfortunately I'm not able to install Photoshop and After Effect. Here is the problem:
FATAL: Payload 'Camera Profiles Installer 9.0.0.6 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db
Anyone has a solution for me?I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps -
Problems with WAS 6.40 Installation on Oracle - Phase 11 of 34
Hello,
<b>Problems with WAS 6.40 Installation on Oracle (Phase 11 of 34)</b>
with the installation of the Web Application server 6,40 SR1 on a Oracle server I get in phase 11 of 34 (Create Oracle Database) the following error-message:
CJS-00084 - SQL statement or script failed. Diagnosis: Error message: ORA-12547: TNS:lost contact.
error while loading shared library: libodm9.so : cannot open shared object file: No such file or dirctory.
Best Reagrds,
Ralf Steffenshi Ralf
i've found one composite note for Oracle <a href="https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001366932002">505630</a>
hope this solves...
<i><b>Symptom</b>
ORA-12547: TNS:lost contact
Brbackup, brarchive, brrestore or brconnect may terminate with errors similar to the following:
BR301E SQL error -12547 at location BrDbConnect-1
BR301E SQL error -12547 at location dbf_info_get-1
Sapdba returns the following error, for example:
SAPDBA: ORACLE error -12547 occurred while checking instance status!
The R/3 work processes or R3trans return the following error at Connect:
C *** ERROR => CONNECT failed with sql error '12547'
<b>Other terms</b>
TNS-12547, TNS-00517
<b>Reason and Prerequisites</b>
As part of the Net8 Connect, a program such as the R/3 kernel, R3trans, svrmgrl, sqlplus or ODMA establishes a connection to the Oracle database. If the connection terminates due to problems at the server end, it can result in ORA-12547.
Additional information for the error is often available in sqlnet.log. In many cases, other messages that are not reported by all tools precede ORA-12547. If ORA-12547 occurs when the ODMA accesses the old Oracle-Home during a database upgrade, for example, it may make sense to temporarily restart ORACLE_HOME on the old Oracle-Home for test purposes and then to execute sqlplus or svrmgrl.
Even if sapdba or the BR tools terminate with an ORA-12547 when calling sqlplus or svrmgrl recursively, you should, for test purposes, call sqlplus or svrmgrl manually with the operating system user that was used.
Hopefully, a more informative error message will appear in addition to ORA-12547, for example:
ld.so.1: oracleC11: fatal: relocation error: file
/oracle/C11/817_64/libx8.so: symbol ksunsga_:
referenced symbol not found
If you find accompanying error messages of this type, start a note search with the corresponding search terms since we are often aware of the problem and a solution may already be available. If you do not find any significant error messages or a suitable note, check the following possible causes for ORA-12547:
1. UNIX: Incorrectly linked Oracle tools
2. UNIX: Problems with XPG4 compliance and s-bit
3. Too many requests to the listener at the same time
4. HP-UX, Oracle 8.1: Missing OS patch
5. Use of CRYPTO parameters in sqlnet.ora
6. AIX: I/O Async is deactivated
7. Resource problems
8. The CONNECT_TIMEOUT_LISTENER parameter in listener.ora is too low
9. Activated Oracle trace
10. UNIX: Incorrect oracle executable authorization
11. SOLARIS: LD_LIBRARY_PATH set when you call ODMA
12. AIX: Problem with post/wait kernel enhancement
13. UNIX: Problems with the libobk library
14. SOLARIS: Incorrect search sequence in the path variable
15. UNIX: Conflicts between 32-bit and 64-bit files
<b>Solution</b>
1. Relink the Oracle software as ora<sid> with
cd $ORACLE_HOME/rdbms/lib
make -f ins_rdbms.mk install
or
relink all
1. See Note 88884.
2. If individual work processes terminate with ORA-12547 when you start an R/3 instance, See Note 131561.
3. See Note 399610.
4. You can set security parameters that begin with SQLNET.CRYPTO_ in sqlnet.ora as part of the Advanced Security Option. Oracle releases < 8.1.7 cannot process these parameters correctly and result in ORA-12547. In this case, delete these types of parameters from sqlnet.ora.
5. If I/O is deactivated on AIX Async, the Net8 Connect fails with ORA-12547. In this case, activate I/O Async by using smitty.
6. Insufficient resources such as available memory on the database server can cause ORA-12547. For more information, see 384839.
7. In individual cases, it may make sense to increase the CONNECT_TIMEOUT_LISTENER parameter in listener.ora (for example, by 5 seconds, so from 10 to 15). Although a value of 10 seconds should usually be sufficient to establish a connection.
8. Delete the log files written by the Oracle trace in accordance with Note 92537.
9. Check to see whether the executable in $ORACLE_HOME/bin has the "rwsr-s--x" authorizations and the ora<sid> owner and correct this if necessary.
10. If you call ODMA on SOLARIS as part of a database upgrade and if LD_LIBRARY_PATH is set explicitly (on the lib directory of the target release), calling the old Oracle software through ODMA may fail with ORA-12547. If you use the old ORACLE_HOME to list sqlplus or svrmgrl, you get the following error:
ld.so.1: oracle<sid>: fatal: relocation error:
file /oracle/<sid>/817_64/libx8.so: symbol ksunsga_:
referenced symbol not found
ORA-12547: TNS:lost contact
In this case, permanently delete LD_LIBRARY_PATH from the environment. This does not have any negative effects since the libraries are automatically found in the correct directories as of Oracle 8.1.
If problems occur with the post/wait extension on AIX, the following type of errors will be displayed:
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
0509-130 Symbol resolution failed for oracle because:
0509-136 Symbol pw_post (number 2524) is not exported
from dependent module /unix.
0509-136 Symbol pw_wait (number 2525) is not exported
from dependent module /unix.
0509-136 Symbol pw_config (number 2526) is not exported
from dependent module /unix.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
ORA-12547: TNS:lost contact
1. If the libobk library was created incorrectly, the following type of errors may occur:
/oracle/C11/817_64/bin/oracle: /sbin/loader:
Fatal Error: Cannot map library libobk.so
/usr/lib/pa20_64/dld.sl: Unable to find library
'/oracle/C11/lib64/libobk.sl
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
0509-150 Dependent module /oracle/C11/817_64/lib/libobk.a(shr.o)
could not be loaded.
0509-152 Member shr.o is not found in archive
ORA-12547: TNS:lost contact
Check to see whether libobk exists and, if it is a link, that it points to a valid object. Note 142635 contains more information about this. The libobk link may point to this if a libsbtsh8.* file exists in the Oracle library directory. If you are using a third-party Backint tool, contact the relevant supplier, since libobk often has to point to a backint-specific library.
1. If an error such as
ld.so.1: ./svrmgrl: fatal: libucb.so.1: open failed:
No such file or directory
ORA-12547: TNS:lost contact
occurs, the PATH has probably been set incorrectly. For more information, see Note 44361.
1. If an error such as
ld.so.1: oracle<sid>: fatal: <library> wrong ELF class: ELFCLASS64
ORA-12547: TNS:lost contact
concerning "wrong ELF class" occurs, check whether the <library> mistakenly has a different bit size than the tool that was called. You can determine this using
file <library>
file <tool>
All the files involved must uniformly be either 32-bit or 64-bit.
</i>
Regards
Arunkumar -
We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German).
Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
"There was an error during installation"
From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
Exception: ....
System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
doesn't exist, because Windows is English.
Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
Thank you for your helpHello,
1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problem on SunCluster 3.1 installation
Hi,
I wanna install a Sun Cluster 3.1 (2005Q4) on the newly released Solaris 10 05/08 (update 5). But when finishing the installation of SunCluster, I rebooted my server and found it paused. Please have a look at the console output as below
===================================================================================
syncing file systems... done
rebooting...
SC Alert: Host System has Reset
SC Alert: Host system has shut down.
Sun Fire T200, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.25.8, 8184 MB memory available, Serial #78640384.
Ethernet address 0:14:4f:af:f5:0, Host ID: 84aff500.
Rebooting with command: boot
Boot device: root_dsk File and args:
SunOS Release 5.10 Version Generic_127127-11 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hostname: ema1464
Configuring devices.
devfsadm: minor_init failed for module /usr/lib/devfsadm/linkmod/SUNW_scmd_link.so
Jul 18 18:03:55 in.mpathd[184]: The link has gone down on e1000g4
Jul 18 18:03:55 in.mpathd[184]: NIC failure detected on e1000g4 of group sc_ipmp0
Jul 18 18:03:55 in.mpathd[184]: No test address configured on interface e1000g4; disabling probe-based failure detection on it
Jul 18 18:03:55 in.mpathd[184]: No test address configured on interface e1000g0; disabling probe-based failure detection on it
Loading smf(5) service descriptions: 1/24Jul 18 18:03:56 Cluster.CCR: minor_init failed for module /usr/lib/devfsadm/linkmod/SUNW_scmd_link.so
24/24
Jul 18 18:04:49 in.mpathd[386]: The link has gone down on e1000g4
Jul 18 18:04:49 in.mpathd[386]: NIC failure detected on e1000g4 of group sc_ipmp0
Jul 18 18:04:49 in.mpathd[386]: Successfully failed over from NIC e1000g4 to NIC e1000g0
Jul 18 18:04:49 in.mpathd[386]: No test address configured on interface e1000g4; disabling probe-based failure detection on it
Jul 18 18:04:49 in.mpathd[386]: No test address configured on interface e1000g0; disabling probe-based failure detection on it
/usr/cluster/bin/scdidadm: Could not load DID instance list.
Cannot open /etc/cluster/ccr/did_instances.
Booting as part of a cluster
NOTICE: CMM: Node ema1464 (nodeid = 1) with votecount = 1 added.
NOTICE: CMM: Node ema1464: attempting to join cluster.
NOTICE: CMM: Cluster has reached quorum.
NOTICE: CMM: Node ema1464 (nodeid = 1) is up; new incarnation number = 1216375495.
NOTICE: CMM: Cluster members: ema1464.
NOTICE: CMM: node reconfiguration #1 completed.
NOTICE: CMM: Node ema1464: joined cluster.
ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast
did instance 1 created.
did subpath ema1464:/dev/rdsk/c0t0d0 created for instance 1.
did instance 2 created.
did subpath ema1464:/dev/rdsk/c0t1d0 created for instance 2.
did instance 3 created.
did subpath ema1464:/dev/rdsk/c0t2d0 created for instance 3.
did instance 4 created.
did subpath ema1464:/dev/rdsk/c0t3d0 created for instance 4.
did instance 5 created.
did subpath ema1464:/dev/rdsk/c1t0d0 created for instance 5.
=============================================================================================
Can anyone help me solve this problem? Thanks in advance.i already had crystal reports installed on C-drive. after uninstalling it, got this field editable.
-
Problem with R3 4.6C Installation on RHEL4 x86_64
Hello Experts,
We currently have the 4.6C system on Solaris (64 Bit) and the plan is to migrate to RHEL4 x86_64. I am trying to do a vanilla install of 4.6C SR2 (4.6D EXT kernel) with Oracle 10.2.0.2 on the Linux box as the first step.
I have gone through notes 946141 and 816145 and adapted the changes mentioned there. The installation has progressed smoothly until the database creation step.
What I've completed so far:
SAP Binaries extracted successfully
Oracle Database Software installed successfully
Oracle 10.2.0.2 Patchset installed successfully
I then continue the installation with R3setup and it creates the database successfully BUT I've noticed that its creating an older version of the tablespace which causes my installation to fail at the ORADBUSR_IND_ORA phase.
I have replaced the oradbusr.sql file from the one in note 573042. I have also confirmed that the DBSIZE.TPL and DDLORA.TPL in the installation directory are copied from the Export CD and have the latest tablespace names.
The last couple of lines from the oradbusr.log are:
. Oracle Version: 10.2.0.2.0
. Parametervalue os_authent_prefix: OPS$
. Schema Id: R3
. Database User (Schema): SAPR3
. SAP R/3 Administrator: OPS$DW1ADM
unable to assign default tablespace to user: SAPR3
begin
ERROR at line 1:
ORA-00959: tablespace 'PSAPUSER1D' does not exist
ORA-06512: at line 90
The tablespaces created in the database so far are:
SQL> select tablespace_name from dba_tablespaces;
TABLESPACE_NAME
SYSTEM
PSAPUNDO
SYSAUX
PSAPTEMP
PSAPR3
PSAPR346C
PSAPR3USR
The last three tablespaces (PSAPR3*) are really old and do not exist in my current environment.
Any ideas on how I could get over this problem? I could create the PSAPUSER1D manually but would prefer not to do it this way.
Thanks,
ChengWe currently have the 4.6C system on Solaris (64 Bit) and the plan is to migrate to RHEL4 x86_64. I am trying to do a vanilla install of 4.6C SR2 (4.6D EXT kernel) with Oracle 10.2.0.2 on the Linux box as the first step.
To do a migration you need to export your source system using R3load and import that exported system (heterogeneous migration). You can´s use backup/restore method due to endianess differences and you need a certified migration consultant on-site to assist you in the migration (http://service.sap.com/osdbmigration).
I have replaced the oradbusr.sql file from the one in note 573042. I have also confirmed that the DBSIZE.TPL and DDLORA.TPL in the installation directory are copied from the Export CD and have the latest tablespace names.
This is really strange - it should use the one you copied to the installation directory. Can you check if it´s using the correct one? Not that R3setup is re-copying it from the installation CD again...
Markus -
Problem with ana 3.6 Installation on solaris 10
Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advanceI've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521 -
Keyboard problem on solaris express de installation
Hello i m having problem to install solaris express developper edition on my pc, as when the installation start, it doesnt take anything i type from the keyboard.
It s solaris express release 5.11 version snv_57.
My keyboard is standard ps2 keyboard. I tried with two keyboards and i have the same problem.
Someone knows how to solve this issue ? Is there anything to configure in bios ?
thank you for any helpSolved by using a usb keyboard...
-
Problem Workshop Studio 3.3 Installer
Hello,
Today I tried to install Workshop Studio 3.3 on my Red Hat Enterprise Linux 5.
Unfortunately the installer immediately breaks, stating problems with some shared objects like libc.so.6, librt.so.1, etc.
How could that be, I'm pretty sure, the libs are there:
# locate libc.so.6
/lib/libc.so.6
/lib/i686/nosegneg/libc.so.6
/lib64/libc.so.6
Tried to install as root and my actual user, no difference.
The full error message copied from my shell:
# ./WorkshopInstaller.bin
Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/opt/bea/jdk150_06/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Any help would be appreciated
Thanks
MarcoHi,
Attached is a workaround which worked in the past
Subject: Re: Installation problem
"In the meantime, I found the solution on a forum:
I edited the Workshop bin install file with an hex editor, changed "LD_ASSUME_KERNEL" by "XD_ASSUME_KERNEL" and everything works !"
the link to the installanywhere forum posting
http://community.zerog.com/cgi-bin/ikonboard.cgi?s=45771da52e39ffff;act=ST;f=14;t=7596
-Raj
Edited by akraj at 05/04/2007 10:04 AM -
Problem with nokia e51 plugin installation
hey guys!
i have a problem concerning the installation of the plugin for the usage of the nokia e51 with apple isync. (nokia_e51_1v1.dmg)
i have mac osx 10.4.11 and isync 2.4.
when i tried to install the plugin i got the message that i have to upgrade to the latest version of isync using apple software update. i am a little bit confused cause my system actually matchs the requirements for the installation.
at the nokia website is stated that the minimum requirements are max osx 10.4.9 and isync 2.4 to use the plugin.
could somebody please help!?
Solved!
Go to Solution.hi!
i have the answer to the problem. i had moved the isync application into a subfolder. after i had removed the application into the application main folder the installation worked.
thanks a lot anyway ...
cheers
daniel -
Problems with Password and Printer Installation
I recently have been trying to install a deskjet and when I put in the installation disc and it asks me my password, I type it in and get the response
The software to be installed requires Administrator or higher level access priveleges.
I a) know my password is correct b) I was the only acount (therefore I had to be the administrator) until I went through the steps to make another administrator account so I could be sure that I was using the right password and acount. I JUST DON'T KNOW WHAT TO DO!!!
I also know that when I purposely type in the wrong password, it tells me it is the wrong password, not the message I receive when I type in the right one.
I'd appreciate any help
Mac OS X (10.3.9)YOU ARE MY HERO!! it worked and problem solved. Thank you very much.
kikis931 -
Problem in Running the Oracle Installer Remotely
Hi,
I installed the Oracle 10g on Enterprise Linux 4.5. The installer runs fine on the linux host successfully. And install the oracle software. Now I want to run Oracle installer remotely from my windows xp workstation but It is failing. Also I want to run DBCA remotely. But it also failed. Can anyone help me with this problem. On local linux machine every things works fine. I can run xclock as well locallay.
I need step by step instructions please. I am totally new in this.
I am using SSH connection to access my Linux box. ( I am using PuTTY ssh/telnet client).
Do I need to set any environment variable as linux user in my .bashrc file (Profile file). If so what is that.
Do I need to modify any file at Linux server for X forwarding. ( I am not at all familiar about X forwarding, how or when to configure it and why). If so what all things I need to do.
Any setting at my windows xp work station.
Any other recommended ssh/telnet client to use instead of PuTTY.
Many Thanks in Advance.
Asif
Message was edited by:
user575045Hi Madrid,
According to your instructions I started vncserver at Linux box. Now from my windows workstation I want to connect to linux. Can you recommend a good vnc client. I google and saw mostly vnc software is for windows. I tried TightVNC Viewer but I dont not connecting to the linux server. Once I provide the IP for Linux server It is giving me the errors that it could not find any vncserver. On linux I am running the vncserver. From my windows box I can ping the Linux server.
Any help or recomendation in this regard will be highly appreciated.
Thanks
__Asif
Maybe you are looking for
-
I removed safari how can I get it back???
Hello everyone i've a macbook Pro no retina from 2011 and i'm running the latest version of OS X Yosemite. Yesterday I threw away my Safari and also cleaned the basket. My problem was that there were to much ads and my mac was running very slow so i
-
Hello Can you please help me, it is rather urgent. In my report I dont want to show PO's which are fully invoiced and fully delivered. But I cant find any functional module or BAPI which show PO Header Status. Any suggestions? Thanks in advance.
-
MS Outlook 2007 calendar categories
Hi folks, I cannot imagine that my BB 8800 with the BB desktop 5.0.1. and the device frim ware 4.5.0.174 isn't able to sync the MS outlook 2007 categories with the BB canlendar. Where is the trick? I'm sure that there is a RIM solution. Many thanks!
-
HT5312 I'm not receiving my security questions reset email and it's not in my junk folder
I'm really starting to loose faith in Apple! Please see the thread title!
-
Audio very distorted macbook Pro Retina
Ok, so I started noticing this problem about two weeks ago. Basically my sound quality on my mac, regardless of the output device (tried it on many including internal speakers and sounds the same), has been slowly degrading for the past two weeks. Th