Problem in Jabber Softphone (CSF)

Hello All,
I am currently deploying Call Manager 8.6.1 with Presence 8.6.4. I managed to log in successfully into Jabber. However, I cannot activate the softphone feature. I have created CSF in Call Manager and gives the end user (which is used to log into Jabber) enough privilege (Standard CTI enabled, Standard CCM User). I received an error (refer to attached image) when I tried to login in File > Options > Phone Account.
172.25.149.47 is my Call Manager IP Address.
Any suggestions will be welcomed.

Instead of clicking Apply, just try clicking OK, then go and check if the credentials were accepted.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

  • Jabber Softphone issue

    I'm hoping someone can help me here.
    I am deploying Jabber to our 1000+ user org and there are a handful of users that have the need for Jabber softphones. I am able to setup the CSF devices just fine and the users don't have any errors when they choose to control their computer for control.
    The issue is when the user is connected via VPN (AnyConnect), the calls placed to them do not go to their jabber client. It only rings their deskphone.  They can place calls (internal and external) just fine, but cannot receive them.
    Ideas?

    So, Jabber doesn't even ring??
    Or do you have 1-way/no audio??
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Cisco Jabber Softphone not working

    Hi
    The softphone is not working for cisco jabber windows
    Attached is the logs
    CUCM AND CUPS version 9.x
    I found the below but is not clear to me what is the issue
    2013-10-10 12:53:42,577 DEBUG [0x00001360] [tionplugin\StatusBarPhoneButton.cpp(127)] [plugin-runtime] [OnCanSelectDeskphone] - enabling deskphone menu items
    2013-10-10 12:53:42,577 DEBUG [0x000011a8] [src\config\TftpHelper.cpp(114)] [csf.ecc] [ecc::TftpHelper::doRetrieveFile] - Received error: eFileNotFound downloading file using HTTP from 'http://10.255.0.11:6970/CTLSEPCSFKIKACHRISTOU.tlv', not trying TFTP following an explicit HTTP "not found" error.

    Hi Chrysostomos,
    I assumes your device name is CSFKIKACHRISTOU
    You have added an ower id t the Device
    You have allowed CTI Control for the device
    You have associated the device to your user in End User Page under Device association.
    Your user has is a member of both Standard CCM End Users and Standard CTI Enabled groups.
    Now if you are using as softphone, the jabber client retrieves the TFTP server IP Addresses from IMP. Once it has the address, the client download the CSF config file direct from the TFTP Server.
    Have you configured the TFTP Servers in IMP?
    Application->Legacy Clients->Settings --- specify primary and backup tftp servers.
    Exit from Jabber completely and re-login.
    See how that goes.
    Ben
    Please rate useful posts

  • Problem with Jabber and file transfers WAN - LAN-Users - a solution!

    Hi,
    I read a lot of messages about problems with file transfers between iChat-Users, if one (or both) are behind a NAT.
    I had this problem to and found an easy solution:
    My situation
    iChat-Server behind a Netgear ProSafe FireWall. I opened the needed Ports including Port 7777 (the Port for the iChat-proxy (proxy65).
    The iChat-Server is configured to host the domain "server.ourdomain.com" (as an example).
    This address can be reached from the LAN and also from the WAN-side.
    From the LAN-side the DNS redirects to 192.168.1.1, from the WAN this domain redirects to our official IP-address (the WAN-IP of the FireWall).
    I tried nearly all kinds of mentioned solutions, but nothing helped.
    The really easy solution is: I just added our official IP to the "Hosted Domains" in the iChat-section of Server-Admin.
    After that change, the transfers are made via the proxy65 of iChat-Server. The transfers are shown in the log /private/var/jabberd/log/proxy65.log.
    I think, that the other posters who also have this kind of problem are working in a similar setup (domain name of server is used from the LAN AND the WAN-side with different IP-addresses (LAN-IP & WAN-IP).
    This solution will only work, if the WAN-IP is a fixed address.
    svenc

    Until the introduction of file promises in AIR Athena, it  has never been possible to drag remote files out of an AIR application.
    You could refer to the http://www.adobe.com/devnet/air/flex/articles/using_file_promises.html
    Hope this is helpful. Please let me know if I could help more.

  • Problem with Jabber Telepresence Bridge

    I have a Jabber Video Telepresence account that I cannot access my personal bridge.  When I try to connect, it tells me "Call denied".  I can connect to other personal video bridges just fine.
    Can anyone tell me who I can open a support case through?
    My video address is:  [email protected]
    My bridge is: [email protected]
    Thanks
    Jesse

    Hi Jesse,
    Please call 877-533-4246 option 1 to get phone support.  They will open a case for you as well.  This forurm is strictly for the free beta service with the domain @jabber.com.
    Regards,
    Jason

  • Cicso Jabber has encountered a problem and needs to close

                       I have 30+ users all intermittently getting the error while Jabber is running in the background..    We have Jabber set to start on boot, and it also sometimes will not load at boot and errors instead.  All PC's are running XP SPK3, with Office 2007 SPK3.  Any ideas?

    Hi Sandra
    I have the same problem.  Jabber client ver 9.0.5, XP SPK3.  My issue appears with Jabber set to start on boot and disappears when start on boot is disabled.  There's a button on the error dialog box which can be used to generate a logdump for TAC. 
    2012-10-14 07:38:49,546 DEBUG [0x00001528] [c\plugin-runtime\impl\JabberPrt.cpp(157)] [plugin-runtime] [topLevelRuntimeExpectionFilter] - Unhandled Jabber runtime exception has occured. Attempting to launch PRT.
    2012-10-14 07:38:49,546 DEBUG [0x000013b8] [c\plugin-runtime\impl\JabberPrt.cpp(157)] [plugin-runtime] [topLevelRuntimeExpectionFilter] - Unhandled Jabber runtime exception has occured. Attempting to launch PRT.
    2012-10-14 07:38:49,546 DEBUG [0x00001528] [rc\plugin-runtime\impl\JabberPrt.cpp(61)] [plugin-runtime] [InitalizePRTRelatedFilePaths] - PRT related files: Log: C:\Documents and Settings\me\Local Settings\Application Data\Cisco\Unified Communications\Jabber\CSF\Logs\csf-unified.log, Ini: C:\DOCUME~1\me\LOCALS~1\Temp\JabberPRT.ini
    2012-10-14 07:38:49,546 DEBUG [0x00001528] [c\plugin-runtime\impl\JabberPrt.cpp(124)] [plugin-runtime] [startJabberPrt] - Writing exception info and thread ID to .ini file.
    I just disabled autostart.  Thanks.  I thought it was just my PC..

  • Jabber for Windows 9.2 deskphone control issue

    Hi experts,
    I'm having a problem with the newly installed Jabber for Windows 9.2.0. When I click on the bottom right "control phone" and select my Cisco 7941 it fails. I tried restarting the Cisco CTIManager service with no luck.
    Deployment:
    IM&Presence: cloud (Webex service)
    CUCM version: 8.6(2a)
    LDAP integration: full (with authentication)
    Deskphone control was working prior the upgrade of Jabber for Windows. Everything else remained the same version.
    Using Jabber softphone as a client still works fine.
    CUCM ENd User is correctly configured.
    Wireshark trace of my Jabber for Windows 9.2 client communicating with CUCM when attempting to control my deskphone shows the following:
    Username: filippo.zangheri
    Password: checked three times (it is correct because Jabber softphone works fine).
    Any hint?
    Thanks.
    Filippo

    Davide,
    I know i am kind of late to the party on this one but i have fixed my issue and wanted to give you the information to see if this will work for you. If this is even still an issue?
    I too had the same issue and just like you i confirmed everything was correct however I discovered something when I was looking into my End User profile on the CUCM. I had originally swapped my 7971 phone with a new 8945 phone and I had both phones associated with my line for a while before I removed the old 7971.
    My End User profile still had both phones associated with my number even though the 7971 phone had been removed from my line. This was not allowing the CTI to connect to my 8945 phone or allow my jabber client to "Control Phone" properly because it couldn't figure out which phone to control. I went into the CUCM and physically deleted the 7971 phone from the system which released the associated phone in my End User profile. Once I did that, I "Control Phone" in my Jabber client and voila it worked like a charm!
    To make sure I didn't have any Jabber client issues after doing this i signed out of my Jabber client and deleted the local system profile for the Jabber client and then signed back into Jabber and let it recreate the profile. Once that was done i have not had any issues with my Jabber client controlling my phone and all functions work perfectly.
    Hope this helps...

  • Phone account tab on jabber on windows missing

    Hi All,
    i had a problem with jabber on windows, i already login and can do a IM and see the presence, but i cant do voice/video call,
    when i try to see the setting on file - options - i cant see any phone account tab, that should be i used to put my phone configuration,
    i use a BE6K with unified PM, are anyone experienced this before?
    thanks
    Nafi.

    You need to add the following on your xml for the phone account option to show on the newer Jabber versions
      Not_Set
    Save the file as jabber-user.xml to test,
    Get the file to this folder:
    C:\Users\User\AppData\Roaming\Cisco\Unified Communications\Jabber\CSF\Config.
    If this solves the issue upload the xml as jabber.xml on a TFTP.
    Hope it helps!

  • Jabber 9.2.5 desktop sharing intermittently working

    Hello All,
    I'm experiencing strange problems with jabber desktop sharing feature.
    I'm using CUCM 9.1 and IMP 9.1 with J4W 9.2.5 in softphone mode.
    I configured the sip profile for jabber devices with: "Allow Presentation Sharing using BFCP"
    Sometimes users can initiate a desktop sharing session sometimes they can't.
    Can you please advise on this? Is it fully supported or I should use webex?
    thanks
    lorenz

    Hi,
    We use the Last jabber 9.6 Build. To avoid the cert question we use dring the Installation the following switches, the cert Switch is here the Import Switch..
    msiexec.exe /i CiscoJabberSetup.msi CLEAR=1 AUTHENTICATOR=CUP CUP_ADDRESS=vCUPPUB1.example.com SERVICES_DOMAIN=example.com CERTIFICATE_VALIDATION=DISABLE
    -joerg

  • Jabber and Yahoo gateways

    Having a problem using Jabber and a Yahoo gateway. I set up an account (using Psi) and that was successful. I can chat with others using Psi just fine. But when I set up iChat to do this it recognizes my account, logs me in but when I open a chat with a Yahoo buddy I see them typing but the message never appears. My Yahoo Messenger and Psi work just fine but iChat is a no go I've tried creating a new Jabber account (with Psi) same results. Tried it on 2 different computers - iBook G4 and 933 mhz QuickSilver G4. Same results. Anyone have any ideas?

    Strange.
    I'm still having the same problem with the server you recommended. I'm wondering if there is something that I'm not configuring correctly in Psi or iChat.
    Just to reiterate the issue:
    I can sign up for a Jabber account,
    configure it using Psi (loading the yahoo and msn gateways),
    Log out of Psi,
    Register the Jabber account in ichat and log in,
    What works:
    The contacts appear in my iChat Jabber list,
    Those that are online appear online
    I can send a message out to the contact
    What doesn't work:
    Receiving incoming chats from buddies
    Receiving replies to chats that I've initiated
    Actions I've taken so far:
    Enabled port 5222 and 5223 on UDP and TCP
    I've tried with SSL activated and deactivated
    Any other ideas or recommendations for servers that are working?
    Thanks,
    ...Jamie

  • Jabber Voicemail Incorrect Time Stamp

    I just noticed the the time stamp on my voicemails in Jabber v9.0.1 Build 12296 have the incorrect time stamp. They are all one hour behind. I confirmed that this does not happen in any of the following:
    Jabber v9.0.5
    CUPC v8.6
    Jabber for Mac v8.6.1
    Is this happening to anyone else?

    did you get this sorted out?  Im having the same problem with Jabber v9.1.5, CUC 9.1.2 and cucm 9.1.2.  Both cuc and cucm use the same NTP time source.  Time looks fine on the handsets and from the cli..

  • Jabber to 9971 CME no video via CUBE

    I can make calls Jabber sotphone/Jabber softphone with video fine.
    I can make calls Jabber softphone  to same cluster CUCM 9971 with video fine.
    When I make a call Jabber Softphone call via CUCM SIP Trunk to CUBE to CME 9.1 15.2 I get no video.  Any ideas?  Is there a setting for RTCP on a sip trunk or dial-peer or somewhere else in CUBE or in CME?  As I saw a similar issue on NetPro resolve that.
    CUCM 9.1
    CUE IOS 15.1
    CME 9.1 / IOS 15.2M5
    9971 SIP9.4.1.9
    Jabber for Windows 9.7.2

    Hello!
    Does video work inside CME?
    Did you configure 'video codec' inside dial-peer?
    Regards,
    Kirill

  • No video stream when calling 3rd party endpoint from Jabber client

    I use my own H323 client based on the H323Plus open source. It works very well with VCS and all endpoints we tried (a dozen or so from every vendor). We have a problem with Jabber Video though, across all versions from MOVI to 4.4.3. When my own client calls Jabber everything works as it should. However, when Jabber calls my client then (1) it takes up to a minute for Jabber to display incoming video and (2) Jabber does not create outgoing video stream. This behavior is 100%  reproducible across all PCs we tried. Jabber is registered with either VCS Starter Pack or VCS Control, sofwtare version 6.1 in both cases. We do not use provisioning at this time.
    In Jabber logs there is a unclear hint about insufficient resources (bandwidth?) for the video stream. VCS configuration is fine (it works with all other clients like e20) and I do not see anything useful in VCS logs.
    To narrow the discussion, this is NOT a firewall, client camera or driver, OS misconfiguration or any other external issue. It is Jabber video having problem negotiating capabilities and/or resources but only it initiates the call. Where should I look for a solution?

    I was afraid this will end this way. I hoped you might have had such a case solved already :-).
    Audio works fine, no problem at all. The video packets are not sent from my client to Jabber while in the 1 minute wait; the stream from Jabber  is not even started. I still think I need Wireshark to decode H225 traffic. Good idea with the interworking log - I was too lazy to go the OS layer. As you surely know, only 2 of the VCS logs are available from the Web interface.
    thanks for your help!

  • Jabber for windows can't play voice mail

    hello everyone....
    i config jabber with Unity Connection
    now i can receive a voice mail form jabber ,all is right ..but i can't play it
    if i login the voice mail i can hear the voice mail......only can't play form jabber ...
    my jabber client is 9.2 and CUCM 9.1 Unity Connection 8.62 CUPS 9.1

    We have the same problem with Jabber for Windows 9.2.
    It is interesting that the voicemail feature seems to work for a few seconds when the client starts up. At this time I can see all of voice mails, and the number of unread voicemails shows as a number where the voicemail icon is, but then they all disappear. The voicemail tab then shows the message, "Cisco Jabber is not connected to your voicemail server".
    The 'Call voicemail' button works.
    I understand that our server has been setup for TLS, and that the voicemail tab in Jabber for Windows 9.1.5 works.

  • WRT54G Router and VOIP/Softphone

    I am having trouble using X-lite (softphone) with my WRT54G.  I just recently signed up for VOIP with Voip your Life and am using their X-lite software to start making phone calls.  The softphone works perfectly when my computer is hooked directly up to my modem, but when I run the modem into the router, and the router to my computer, it does not work.  So obviously there is a problem with the router, and the software is configured just fine.  I have tried port forwarding in the range of 5060-5069 and 16000-16500 as UDP protocol.  I was instructed by their tech support to set it up this way.  I also clicked off of "Block Anonymous Internet Requests" under the Security/Firewall settings.  Still no luck.  What else could be preventing the Internet phone from connecting to the internet? 
    Message Edited by Schreebs on 11-13-2007 03:33 PM

    So obviously there is a problem with the router, and the software is configured just fine.
    This is incorrect. It is usually a configuration problem on the softphone because your router only does what you want it to do which is NAT for your private LAN. You have to enable STUN in x-lite for NAT traversal of the router. Otherwise x-lite will register your private IP address with the provider which obviously won't work.
    You should have a look into the log of x-lite. It shows you which packets have been sent out and which you have received. See if it only sends something out end does not get any responses. You can also see what IP address the softphone uses to register.

Maybe you are looking for