Problem in joining the 10G AWM Cubes

Hi,
I have created a Cube in 10G AWM. But while mapping the Cube I am not being able to find the row to drag and put joining condition between the Cube and the Dim. Also I am finding that the 'Maintain Cube' option is disabled.
I have worked in 11G AWM but I have not faced this issue and was able to bui;d the Cubes there.
The version I am using arre:
AWM --> 10.2.0.3.0A
Oracle --> Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
Can you please help me in this regard.
Thanks in advance,
ChD

Hi David,
Thanks for the reply. But frankly speaking I did not understand the things that I need to do. :(:(. Can you please tell me based on the requiremnt of mine how I can map the fact in the AWM 10G and where/how tell the Cube that 'these' are my Fact --> Dim mappings.
I found out that once I built a Cube in 10G AWM, if I needed to do away with any Dim I was not able to do so. The select and add Dim Pane in the Cube remains disabled. I need to again create a cube and experiment with lesser Dim tables. Is it the way 10G AWNM is destined to behave?
Also, again referring to my requirements, where I have a Fact table, a Dim table and a Dim Hierarchy table, how can I map my Dim with the Dim hierarchy in 10G AWM? Suppose my higher level roll up should happen based on the Dim Hierarchy table. So I plan to join Fact --> Dim and then Dim --> Hierarchy (for rolling up measures on top Hiererachy). How am I going to do that in the 10G AWM?
I just now faced the follwoing error for the INS_PLAN_DH (Insurance Plan Hierarchy table):
***Error Occured: Error Validating Measure Mappings. Measure key expression for INS_PLAN_DH.DIMENSION dimension, mapping group MARKET_SALES_CUBE.MAPGROUP2.CUBEMAPGROUP does not exist.
Did not understand the menaing of it.
Please advice.
Thanks...
ChD
Edited by: 875976 on Aug 4, 2011 5:04 AM

Similar Messages

"there was a problem re-joining the wireless network or finding the device"

I get this error when trying to have my Airport (for wireless printer sharing) join my current O2 Broadband wireless network:
*AirPort Utility was unable to find your Apple wireless device after restarting.*
*The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again.*
Anyone have any idea how to fix this?

This has been a total joke...Same problems as many here and zero response from Apple! I've had an AX for 3 years or so and it has worked fine, that is until it dropped its connection 2 days ago. I went to reset and the utility prompted me to do some updates...then magically it all went down the tubes!
*"The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."*...look familiar? Well, I tried everything including the many possible fixes listed here at the discussions...and of coarse NOTHING. I decided that maybe it had just out-lived itself and bought a brand new AX yesterday...funny SAME PROBLEM. Now all the tinkering is affecting my network. I returned the new AX today, and surprise the people at the Apple Store had never heard of the issues, let alone have idea of what to do next! VERY MAD!
Any new solutions would be great! THX.

Problem when joining the domain MDT 2012

Windows 2008 R2, MDT 2012 Update 1
Hi,
CustomSettings.ini is configured to create computers in different OU's depending on their gateway. Works well.<o:p></o:p>
But when the computer exists it won’t move the computer to the right OU. How can I make it move to the right OU?<o:p></o:p>
Thx
BRBDK

Hi,
existing computers either need to be removed during re-installation, or they need to be moved by a custom script. There is no other way. Once a machine is already present in an OU, it will not change to the new defined OU.
Please see the following links for reference:
Moving Computers in Active Directory during MDT Deployments – Step by Step
http://mdtcustomizations.codeplex.com/
If this post is helpful please click "Mark for answer", thanks! Kind regards

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Windows 8.1 Pro has error while joining domain, while windows 7 pro has no problem to join in the same network

I am having the same issue as posted in http://social.technet.microsoft.com/Forums/windows/en-US/6ea57e5f-6e9d-49bd-9dd7-832ea84c0276/windows-81-pro-will-not-join-domain?forum=w8itpronetworking
There are a few other people have the same issues. However there was no real solution provided although the post was marked as answered. I am posting it here again and hopefully I can get some help to solve this issue.
We got two new PCs, one with windows 7 and the other with windows 8.1 Pro. In the same network with domain, the windows 7 pc has no problem at all to join the domain. However the windows 8.1 Pro won't join the domain. On the windows 8.1 Pro computer,
I can ping the other computers in the network. The error message says:
An Active Directory Domain Controller (AD DC) for the domain "cmi" could not be contacted. ...
In my case, the domain name is "CMI". I am sure the DNS setting is correct. What did I do wrong? Any help is greatly appreciated. Thanks.

I tried the solution in that article.
In HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters folder, there is no
NeutralizeNT4Emulator. So I followed the instructions and created one, and set the value to 1. Then I restarted the computer and tried to join the domain again. I got the same error. Below is more from the netsetup log file:
06/04/2014 21:36:37:256 -----------------------------------------------------------------
06/04/2014 21:36:37:256 NetpValidateName: checking to see if 'XPS8700' is valid as type 1 name
06/04/2014 21:36:40:256 NetpCheckNetBiosNameNotInUse for 'XPS8700' [MACHINE] returned 0x0
06/04/2014 21:36:40:256 NetpValidateName: name 'XPS8700' is valid for type 1
06/04/2014 21:36:40:256 -----------------------------------------------------------------
06/04/2014 21:36:40:256 NetpValidateName: checking to see if 'XPS8700' is valid as type 5 name
06/04/2014 21:36:40:256 NetpValidateName: name 'XPS8700' is valid for type 5
06/04/2014 21:36:40:256 -----------------------------------------------------------------
06/04/2014 21:36:40:256 NetpValidateName: checking to see if 'cmi' is valid as type 3 name
06/04/2014 21:36:40:272 NetpCheckDomainNameIsValid for cmi returned 0x54b, last error is 0x0
06/04/2014 21:36:40:272 NetpCheckDomainNameIsValid [ Exists ] for 'cmi' returned 0x54b
----------------below is the error message from the pop up window
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The domain name "cmi" might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "cmi":
The query was for the SRV record for _ldap._tcp.dc._msdcs.cmi
The following domain controllers were identified by the query:
cmi-dc2.cmi
cmi-dc1.cmi
However no domain controllers could be contacted.
Thanks.

Problem while refreshing the cube from excel

I am trying to refresh the excel file(Cube from excel).
But i can able to refresh the same cube in server. But users facing this problem.
The following error coming
I was working fine till yesterday.
Please suggest me...
Sudhan

Hi Madhu,
According to your description, you can refresh the cube. But the users from a domain can't do this and get the above error. Right?
In this scenario, since you are the only user which can refresh the cube and the other user can't, it might be permission issue. Please re-grant the cube permission (Read/Write) for the domain users. See:
Grant cube or model permissions (Analysis Services).
If the issue persists, please re-install the ASOLEDB10 from Feature Pack, please refer to links below:
multidimensional connection 10.0 box not opening for Excel 2010
Problems connecting Excel to SSAS 2008 (Analysis Services OLE DB Provider issues)
Best Regards,
Simon Hou
TechNet Community Support

Problem joining the payment plan

Hello, I'm trying to join the payment plan to include the amount outstanding bill which according to the following shown on the website is possible to do
What you owe now. When you set up your Monthly Payment Plan we'll say if you need to pay some of what you owe first. We'll then divide the remaining amount by six, and add it to your monthly payment
However when I try to set it up online it won't allow me to do so, saying that the amount outstanding must be cleared first. To be quite honest I am not in a position to pay the amount outstanding but would be quite prepared to make an initial payment on a payment plan if only I could set it up. As I say it's not a case of won't pay rather than can't pay, please can someone advise, thank you

As you have already found out, you can not get onto an online payment plan if you already owe BT money. They want you to clear out standing debt first because you are effectively entering into a credit agreement with them.
If you are having problems meeting your present bills you would be better to contact the Options Team and see if you can set up a payment plan that will take into account the outstanding debt as part of the payment. Call them on 0800.800.030

AP 2700 - 2 MAC addresses - problem with joining to the WLC

Hi,
I had a problem with joining my new AP 2700 to the controller. I've found workaround but I would like to ask you if you know if this behavior is a some kind of bug or maybe feature :)
I have DHCP server which assigns IP address base on the binding MAC address with the IP address. Without binding, IP won't be assigned so I added MAC address from the AP sticker (MAC and SN number is on the sticker at the back of each AP) to the DHCP, connected AP to the switch port which was configured exactly the same way like other ports on this switch where older AP are working fine and.... nothing. IP address was not assigned. There was no DHCP request in the DHCP server logs.
During the investigation I've found that AP present 2 MAC addresses on the switch interface:
switch#sh mac address-table interface fa1/1
Mac Address Table
Vlan Mac Address Type Ports
11 58f3.54c1.2cb3 DYNAMIC Fa1/1
11 58f3.54c1.2cb4 DYNAMIC Fa1/1
The first one (58f3.54c1.2cb3) is a "sticker" MAC address but the second one (58f3.54c1.2cb4) is something new. Looking in to the DHCP logs I've found log that this second MAC address (58f3.54c1.2cb4) tried to get IP address but it was not possible because this MAC was not binding with any IP address so DHCP server refuse. I added this second MAC (58f3.54c1.2cb4) to the DHCP server, AP get IP address, join to the WLC, download software, reboot and ... this MAC address disappear.
switch#sh mac address-table interface fa1/1
Mac Address Table
Vlan Mac Address Type Ports
11 58f3.54c1.2cb3 DYNAMIC Fa1/1
Software I had on the AP before joining to the WLC was:
Version :
Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1)
now I have (after downloaded from the WLC)
Version :
Cisco IOS Software, C2700 Software (AP3G2-K9W8-M), Version 15.2(4)JB6, RELEASE SOFTWARE (fc1)
Do anyone know what happen?

(WLC1) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.130.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.95.16
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS
System Name...................................... WLC1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 10.10.10.10
Last Reset....................................... Software reset
System Up Time................................... 25 days 2 hrs 53 mins 5 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... US - United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +44 C
External Temperature............................. +22 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 6
Number of Active Clients......................... 25
Burned-in MAC Address............................ XX:XX:XX:XX:XX:XX
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 25
(WLC1) >show time
Time............................................. Thu Apr 9 13:51:00 2015
Timezone delta................................... 0:0
Timezone location................................
NTP Servers
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server NTP Msg Auth Status
1 0 10.10.10.11 AUTH DISABLED
It's look like AP doesn't allow for console login or commands it just only show activity. After rebooting the WLC I get information:
Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1)

I had no problem connecting to my network and now all of a sudden I can't connect. Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss. Anyone else have that problem?

I had no problem connecting to my network and now all of a sudden I can't connect my iPad. Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss. Anyone else have that problem? I've gone thru all my settings and can't seem to find a way to log into my network. Don't get the option to put in my password. It just give me the name of my network and option of dismiss instead of password.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

I want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

i want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

You can get Xcode without joining the developer program. Just go to the App Store and download it (it's free).
You'd only need to join the Developer program if you want to put your app into the App Store, this is for OS X.
You will need to join the Developer program if you want to develop for IOS. In that case you will need a parent or guardian.

I have an iPad 2 v6.1.3 that has a problem with connecting to wi-fi. My other I macs have no problem with connecting. The pad keeps coming up with unable to join the network. Nothing has changed with passwords--it just refuses to join my secure network.

My other Imacs and my wife's Ipad 3 have no problem with conneccting. My Ipad keeps coming up with unable to join the network. Nothing has changed with passwords--it just refuses to join my secure network. A couple minutes ago, it connected for 10 seconds, then dropped the connection. Is there a way to reconfigure the Ipad to fix this major problem, as we dropped our carrier (saved a bunch of money) and just went wifi.
Thanks so much for any help with resolving my connection problem.
Gary

Hello jaxgaryj,
The following article provides a number of potential resolutions for your WiFi issues.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Cheers,
Allen

HT1145 i am unable to connect to my wi-fi it is telling me \unable to join the network (applenotebook) my other laptops join with no problem help!

I am unable to connect to wi-fi with my applenote book... had no problem a week ago.. its telling me unable to join the network my other laptop works ok
tried turning it off

Are you using an Apple AirPort Base Station? Try restarting it, as well as your laptop.

WI-Fi problem IPhone 3G (Unable to join the network XY)

Hi, I bought a 3G Iphone 8Gb, It came with firmware 2.2 ...
When I try to access Wi-Fi I got this error : "Unable to join the network XY"
I updated to 2.2.1 and the error continues...
Tried to restore network settings, and nothing...
ps.: My friend with other Iphone 3G can access the same Wi-Fi network...
Help?

It may be that the battery is the issue. I am having the same problems - unable to log in to my WIFI at home, which I have never had an issue with until yesterday, when I started getting the "Unable to access XXX network".
I have tried everything including full iphone restore and router factory restore, but nothing. I did note that after having the phone switched off overnight, I was able to access my wireless network for about fifteen minutes then it just dropped the connection and now I am back to no access whatsoever.
Take a read here:
http://www.applesource.com.au/iphone/soa/iPhone-Wi-Fi-failures-caused-by-battery -heat-/0,2000070787,339295984,00.htm
It is one of many internet postings on this issue and would make sense of the posting above mine..
I'm going to try reverting to 2.2.0 - people such as Leo Laporte on Macbreak Weekly have been complaining of battery issues since upgrading to 2.2.1

Hi! I just joined the creative cloud. As a photographer I would like to download photoshop and lightroom. When I try to do this, before the download starts, I get the message: 'we are experiencing some problems, please try later'. I've tried multiple time

Hi! I just joined the creative cloud. As a photographer I would like to download photoshop and lightroom. When I try to do this, before the download starts, I get the message: 'we are experiencing some problems, please try later'. I've tried multiple times for the last 3 days but no change... Any ideas?

Michelmolder please try utilizing a different web browser. If you continue to experience difficulties then I would recommend reviewing Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install Photoshop and Lightroom directly through the Creative Cloud Desktop application.

What are the Enhancements on Joins in 10g

Can you please explain me the enhancements on Joins in 10g?

Akhil Raman wrote:
Can you please explain me the enhancements on Joins in 10g?Not much. Some minor bug fixing with regards to Ansi Joins, but the base logic is identical to what was there already in 9i.

Problem in joining the 10G AWM Cubes

Similar Messages

Maybe you are looking for