Problem in language (numbers) after installing a new add-on
Recently I added this [https://addons.mozilla.org/en-US/firefox/addon/persian-plus-pack/ Persian calendar add-one] to my Firefox and nothing was wrong with it, except that in Persian websites the font of'' numbers'' are messed up. Now its font is part English, part Persian and very annoying ! (before that it was always English numbers no matter what the page language was)
I removed the add-one, but the problem still exist.
Everything else is OK, just the numbers are messed up, here is a picture about what its look like now, the Persian part highlighted :
http://s2.kimag.es/view/67014904.jpg
You're welcome
Similar Messages
-
After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?
My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite. -
i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your helpIt means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive. -
After installing the new Yosemite OS on my Macbook pro late 2013 touch trap has its own mind. Any others with this problem? What should we do?
Even I tried to get back to Maverick but the touch pad doesn't work again. well, it works for a couple hours then start doing things but its own. it is so annoying.Hello josefromlaie,
Thank you for using Apple Support Communities.
The following article provides some effective steps to troubleshoot trackpad issues:
Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
Regards,
Jeff D. -
Hp Pavilion P6724IT Stuck at HP Splash screen after install of new VGA
Hello people.
I buyed a new VGA, a Gigabyte GT740 2GB DDR5, before that i had an Asus GT630 2GB DDR3 and had no problems with it.
After mounting the new VGA i noticed the computer remains stuck at the initial splash screen with the HP logo.
Can't even get in to the bios, but if i remove the card and use it's igpu it's all ok.
I tried to update the bios to the latest version on the HP site (v.7.15) and nothing.
Tried to install with Windows 8.1, and with windows 7, nothing.
I tried all things i found on the net of people with the same issue, nothing again.
If i am fast enough and i press some keys it gets black screen and remains stuck anyway, do some beeps and then go in some kind of standby and if i keep pressed any key it does some cracklin noise.
Actually i can't afford a new motherboard so i wanted to find out with your help if i can find a solution to the problem, cause it's really frustrating and i spent many time trying to figure it out.
Sorry for my bad english!
Hope someone can help me
Cheers
This question was solved.
View Solution.@wb2001 Thanks for asking me to review this theread.
ZeroProsekt,
You should answer the questions as posted by wb2001. If you don't know the answers then contact the graphics card manufacturer and ask for more info about the specific model graphics card that you are attempting to use.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
I can no longer transfer photos from my mac to my i pad via i cloud
Accordong to i photo on my mac the photos are in i cloud
There is plenty of storage available
Don't know if it is just a coincidence, but problem arose after installing a new wi fi printerThere are apps such as Simple Transfer which allow you to transfer photos to/from your iPad and your computer via your wifi network - they will copy into the Camera Roll album in the Photos app on your iPad
-
My telus email no longer works after installing the new os Yosemite
my telus email no longer works after installing the new os Yosemite
This is a problem between Telus and Yosemite. Telus, of course, blames Apple.
Check the box that says "Allow insecure authentication" That will get your email working.
However, this box will get un-checked when you stop start Mac Mail. The next time you start Mail, you'll have to re-check it for each Telus account. (This is the bit that Apple needs to fix.) -
After installing a new motherboard, my imac opens pdf files with colorsync. How do I reset it to open them with Adobe?
That makes sense Dennis. I did that but was unable to find Adobe Reader in my Applications folder. Of note though is that after a restart, the problem seems to have gone away. So, disaster averted. Thanks for responding though. It's nice to have help on this stuff.
D -
After installing the new IOS my iphone 4s won't charge and less I restart it. Why is appl this happening? and What is apple doing about this?
The iPhone has a hardware problem - with the battery or something else.
The iPhone includes a one year warranty. If purchased new in October of 2012, it remains under warranty. Call AppleCare or make an appointment at an Apple Store if there is one nearby. -
Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down, is now occuring after install of new 2nd internal WD IDE 320 GB hard drive, running OS 10.4.11, orig HD is WD 80 GB, RAM = 2 gig. Help!
Hi Ted,
At this point I think you should get Applejack...
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
Ignore the MacKeeper ad no matter what else you decide.
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode. -
Unable to print after installing the new Quicktime upgrade
I can not print to my Epson printer after installing the new Quicktime upgrade on my PowerBook G4 (1.67 GHz, OS X Version 10.4.11). I have re-installed the driver from Epson (several times), and have safe booted and reset my permissions but it will not print. My printer is a Epson Stylus Photo R1800. When I print, it just gives me this message... "Looking for Printer 'EPSON Stylus Photo R1800' "
Latigna, welcome to Apple Discussions.
Here's a similar problem on the same Epson printer. http://discussions.apple.com/message.jspa?messageID=8928421
Also look at Troubleshooting printing issues in Mac OS X
http://docs.info.apple.com/article.html?artnum=106714
Cheers, Tom -
Why has the sound gone all of a sudden after installing the new iOS 5.0.1?
I have had the iPhone 4s since the time it was released in the uk, u had no problems with it, it's network coverage was pretty good, the loudness of the speakers was good ad the battery would last me an entire day, now after installing the new ios 5.0.1, my sous has gone, I can't hear the music playing, I can't here te clicks and the tap sounds when touching the phone, the only time it makes sound is when I make a call and I can put it on loud speaker, other than that there's no sound coming from te loud speaker, oh yeah Siri seems to be working fine. Do aby of you people know what's wrong and if any of you lot are going through the same problem or any other problems since tbe update to ios5.0.1, apple you need to get this sorted as the speaker is important to some of us if not all and it would be great if you could sort this out and any other problems caused by this update and to allow the phone to work and operate the way it should, thanks!
Hi Guys, I FIXED IT!!!!
I have post eariler on this forum and as you know I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back. but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there. all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound. its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits. then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub. This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off. but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right. This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago. I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it. just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers -
After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?
Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
-
After installing a new hard drive can I install snow leopard directly from snow leopard disc
After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz
You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)
Maybe you are looking for
-
How can I get the touching size from TouchPoint class
I built a WPF project MainWindow.xaml: <Window x:Class="TouchSize.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="350" Width="525" TouchMo
-
Foreign currency valuation differences for reconciliation accounts
Hi gurus, we have run the transaction FAGL_FC_VAL - Foreign Currency Valuation (New), now i try to make a report summirazing valuatin differences of the open line items by customer, vendor and gl account. however i cannot found the tables which the v
-
The bookmarks that were added from my IE7 favorites aren't up-to-date. How do I update my bookmarks in Safari? Also, if I want to delete the IE7 folder that is not current in Safari and start over, how do I find the right folder to import all of my I
-
Hi there, For the past couple weeks, I've been trying to update my iPad and iPhone, but cannot due to my Apple ID being disabled. I've changed my password 4 times now, and it still won't take. What can I do? There are a number of updates now, and I w
-
Transferring a movie from a dvd camcorder
I have purchased an analog converter called ADVC110 to try and burn a copy of my home movies which were recorded on my Sony DVD camcorder but the process seems to take forever and is using up all the memory on my i-mac, surely this cannot be right ?